Move to companion firmware, remove from varient

This commit is contained in:
R0ck committed 2026-10-17 23:37:14 +01:00
1 parent e9c5a55872
commit 2ed45f08e7
3 files changed
+18 -62

No files matched your search

+17
View File
@@ -2122,6 +2122,23 @@ bool MyMesh::handleCommand(const char* command, uint32_t sender_timestamp, char*
return true;
}
#ifdef PIN_BUZZER
if (strcmp(command, "get buzzer") == 0) {
sprintf(reply, "> %s", _prefs.buzzer_quiet ? "off" : "on");
return true;
}
if (memcmp(command, "set buzzer ", 11) == 0) {
if (strcmp(&command[11], "on") == 0 || strcmp(&command[11], "off") == 0) {
_prefs.buzzer_quiet = strcmp(&command[11], "off") == 0;
savePrefs();
strcpy(reply, "OK");
} else {
strcpy(reply, "Error: state must be on or off");
}
return true;
}
#endif
if (memcmp(command, "set pin ", 8) == 0) {
_prefs.ble_pin = atoi(&command[8]);
savePrefs();
+1 -55
View File
@@ -20,58 +20,4 @@ void T1000eBoard::begin() {
Wire.begin();
delay(10); // give sx1262 some time to power up
}
void T1000eBoard::attachDynamicPrefs(KeyValueStore* prefs) {
_prefs = prefs;
#ifdef PIN_BUZZER_EN
char val[8];
val[0] = 0;
_prefs->getByKey("buzzer", val, sizeof(val) - 1);
_buzzer_muted = strcmp(val, "0") == 0;
#endif
}
void T1000eBoard::setBuzzerEnabled(bool enable) {
#ifdef PIN_BUZZER_EN
_buzzer_muted = !enable;
digitalWrite(PIN_BUZZER_EN, enable ? HIGH : LOW);
#endif
}
void T1000eBoard::loop() {
NRF52BoardDCDC::loop();
#ifdef PIN_BUZZER_EN
if (_buzzer_muted) digitalWrite(PIN_BUZZER_EN, LOW); // keep it off even if the UI re-enables it
#endif
}
bool T1000eBoard::handleCommand(const char* command, uint32_t sender_timestamp, char* reply) {
#ifdef PIN_BUZZER_EN
if (strcmp(command, "get buzzer") == 0) {
sprintf(reply, "> %s", _buzzer_muted ? "off" : "on");
return true;
}
if (memcmp(command, "set buzzer ", 11) == 0) {
if (strcmp(&command[11], "on") == 0) {
if (_prefs && !_prefs->setByKey("buzzer", "1")) {
strcpy(reply, "Error: failed to save buzzer setting");
} else {
setBuzzerEnabled(true);
strcpy(reply, "OK - buzzer on");
}
} else if (strcmp(&command[11], "off") == 0) {
if (_prefs && !_prefs->setByKey("buzzer", "0")) {
strcpy(reply, "Error: failed to save buzzer setting");
} else {
setBuzzerEnabled(false);
strcpy(reply, "OK - buzzer off");
}
} else {
strcpy(reply, "Error: state must be on or off");
}
return true;
}
#endif
return false; // not handled
}
}
-7
View File
@@ -7,17 +7,10 @@
class T1000eBoard : public NRF52BoardDCDC {
protected:
uint8_t btn_prev_state;
KeyValueStore* _prefs = NULL;
bool _buzzer_muted = false;
void setBuzzerEnabled(bool enable);
public:
T1000eBoard() : NRF52Board("T1000E_OTA") {}
void begin();
void attachDynamicPrefs(KeyValueStore* prefs);
bool handleCommand(const char* command, uint32_t sender_timestamp, char* reply) override;
void loop() override;
uint16_t getBattMilliVolts() override {
#ifdef BATTERY_PIN