add cli option to set custom bluetooth name

This commit is contained in:
Eve committed 2026-11-12 11:09:43 -05:00
1 parent bb870313e4
commit 4c7a134e15
4 files changed
+36 -1

No files matched your search

+13
View File
@@ -413,6 +413,19 @@ Radio parameters are common to all roles and handled by `CommonRadioPrefs`.
---
#### Change BLE name
**Usage:**
- `get ble_name`
- `set ble_name <name>`
- `set ble_name_default`
**Parameters:**
- `name`: New BLE name
**Note:** By default the node name will be used as the BLE name. These commands require a reboot to take effect.
---
### Wifi
#### Get status
+20
View File
@@ -2154,6 +2154,26 @@ bool MyMesh::handleCommand(const char* command, uint32_t sender_timestamp, char*
sprintf(reply, "> pin is now %06d", _prefs.ble_pin);
return true;
}
if (memcmp(command, "set ble_name ", 13) == 0) {
if (AdvertDataParser::isValidName(&command[13])) {
StrHelper::strncpy(_prefs.ble_name, &command[13], sizeof(_prefs.ble_name));
savePrefs();
sprintf(reply, "> BLE name is now %s (reboot to apply)", _prefs.ble_name);
} else {
strcpy(reply, "Error, bad chars");
}
return true;
}
if (strcmp(command, "get ble_name") == 0) {
sprintf(reply, "> %s", _prefs.ble_name[0] ? _prefs.ble_name : _prefs.node_name);
return true;
}
if (strcmp(command, "set ble_name_default") == 0) {
_prefs.ble_name[0] = 0;
savePrefs();
sprintf(reply, "> BLE name reset to %s (reboot to apply)", _prefs.node_name);
return true;
}
#ifdef ENABLE_WIFI_INTERFACE
if (memcmp(command, "set wifi.ssid ", 14) == 0) {
+2
View File
@@ -31,6 +31,7 @@ public:
float tx_delay_factor = 0;
float direct_tx_delay_factor = 0;
uint32_t ble_pin = 0;
char ble_name[32] = {0};
uint8_t advert_loc_policy = 0;
uint8_t buzzer_quiet = 0;
uint8_t vibe_quiet = 0;
@@ -216,6 +217,7 @@ private:
def("defs_nm", _parent->default_scope_name, sizeof(_parent->default_scope_name));
def("defs_key", (void *) _parent->default_scope_key, sizeof(_parent->default_scope_key));
def("pin", _parent->ble_pin);
def("ble_name", _parent->ble_name, sizeof(_parent->ble_name));
def("buzz_q", _parent->buzzer_quiet);
def("vibe_q", _parent->vibe_quiet);
def("auto_add", _parent->autoadd_config); // bitmask for auto-add contacts config
+1 -1
View File
@@ -215,7 +215,7 @@ void setup() {
// add bluetooth interface
#if defined(BLE_PIN_CODE)
bluetooth_interface.begin(BLE_NAME_PREFIX, the_mesh.getNodePrefs()->node_name, the_mesh.getBLEPin());
bluetooth_interface.begin(BLE_NAME_PREFIX, the_mesh.getNodePrefs()->ble_name[0] ? the_mesh.getNodePrefs()->ble_name : the_mesh.getNodePrefs()->node_name, the_mesh.getBLEPin());
interface_manager.addInterface(InterfaceType::Bluetooth, &bluetooth_interface);
#endif