t-beam s3 supreme: repeater, room server, and ble companion verified working. RTC working. No screen, GPS or sensors.

src/helpers/TBeamS3SupremeBoard.h

@@ -40,7 +40,7 @@
 
 //I2C Wire addresses
 #define I2C_BME280_ADD    0x76  //BME280 sensor I2C address on Wire
-#define I2C_OLED_ADD      0x3C  //SSD1306/SH1106 OLED I2C address on Wire
+#define I2C_OLED_ADD      0x3C  //SH1106 OLED I2C address on Wire
 #define I2C_QMC6310U_ADD  0x1C  //QMC6310U mag sensor I2C address on Wire
 
 //I2C Wire1 addresses

variants/lilygo_tbeam_supreme_SX1262/platformio.ini

@@ -7,7 +7,7 @@ build_flags =
   -D LORA_TX_POWER=22
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
-  -D DISPLAY_CLASS=SSD1306Display
+  ;-D DISPLAY_CLASS=SSD1306Display      ;Needs to be modified for SH1106
   -D SX126X_RX_BOOSTED_GAIN=1
 build_src_filter = ${esp32_base.build_src_filter}
   +<../variants/lilygo_tbeam_supreme_SX1262>
@@ -16,9 +16,10 @@ lib_deps =
   ${esp32_base.lib_deps}
   lewisxhe/PCF8563_Library@^1.0.1
   lewisxhe/XPowersLib @ ^0.2.7
+  ;adafruit/Adafruit SSD1306 @ ^2.5.13
 
 ; === LILYGO T-Beam S3 Supreme with SX1262 environments ===
-[env:T_Beam_S3_Supreme_SX1262_Repeater]
+[env:T_Beam_S3_Supreme_SX1262_repeater]
 extends = T_Beam_S3_Supreme_SX1262
 build_flags =
   ${T_Beam_S3_Supreme_SX1262.build_flags}
@@ -29,29 +30,42 @@ build_flags =
 ;  -D MESH_PACKET_LOGGING=1
 ;  -D MESH_DEBUG=1
 build_src_filter = ${T_Beam_S3_Supreme_SX1262.build_src_filter}
-  +<helpers/ui/*.cpp>
   +<../examples/simple_repeater>
 lib_deps =
   ${T_Beam_S3_Supreme_SX1262.lib_deps}
   ${esp32_ota.lib_deps}
 
+[env:T_Beam_S3_Supreme_SX1262_room_server]
+extends = T_Beam_S3_Supreme_SX1262
+build_flags =
+  ${T_Beam_S3_Supreme_SX1262.build_flags}
+  -D ADVERT_NAME='"T_Beam_S3_Supreme_SX1262 Room"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D ROOM_PASSWORD='"hello"'
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${T_Beam_S3_Supreme_SX1262.build_src_filter}
+  +<../examples/simple_room_server>
+lib_deps =
+  ${T_Beam_S3_Supreme_SX1262.lib_deps}
+  ${esp32_ota.lib_deps}
 
 [env:T_Beam_S3_Supreme_SX1262_companion_radio_ble]
 extends = T_Beam_S3_Supreme_SX1262
 build_flags =
   ${T_Beam_S3_Supreme_SX1262.build_flags}
-  -D DISPLAY_CLASS=SSD1306Display
   -D MAX_CONTACTS=100
   -D MAX_GROUP_CHANNELS=1
   -D BLE_PIN_CODE=123456
   -D BLE_DEBUG_LOGGING=1
 ;  -D ENABLE_PRIVATE_KEY_IMPORT=1
 ;  -D ENABLE_PRIVATE_KEY_EXPORT=1
-  -D MESH_PACKET_LOGGING=1
+  -D MESH_PACKET_LOGGING=8
   -D MESH_DEBUG=1
 build_src_filter = ${T_Beam_S3_Supreme_SX1262.build_src_filter}
   +<helpers/esp32/*.cpp>
-  +<helpers/ui/*.cpp>
   +<../examples/companion_radio>
 lib_deps =
   ${T_Beam_S3_Supreme_SX1262.lib_deps}

variants/lilygo_tbeam_supreme_SX1262/target.cpp

@@ -31,24 +31,31 @@ static void setPMUIntFlag(){
 
 bool power_init() {
   //Start up Wire1 with PMU address
-  Wire1.begin(I2C_PMU_ADD);
+  //Serial.println("Starting Wire1 for PMU");
+  //Wire1.begin(I2C_PMU_ADD);
+  //Wire1.begin(PIN_BOARD_SDA1,PIN_BOARD_SCL1);
   
   //Set LED to indicate charge state
+  Serial.println("Setting charge led");
   PMU.setChargingLedMode(XPOWERS_CHG_LED_CTRL_CHG);  
   
   //Set up PMU interrupts
+  Serial.println("Setting up PMU interrupts");
   pinMode(PIN_PMU_IRQ,INPUT_PULLUP);
   attachInterrupt(PIN_PMU_IRQ,setPMUIntFlag,FALLING);
 
   //GPS
+  Serial.println("Setting and enabling a-ldo4 for GPS");
   PMU.setALDO4Voltage(3300);  
-  PMU.enableALDO3();          //disable to save power
+  PMU.enableALDO4();          //disable to save power
   
   //Lora
+  Serial.println("Setting and enabling a-ldo3 for LoRa");
   PMU.setALDO3Voltage(3300);  
   PMU.enableALDO3();   
 
   //To avoid SPI bus issues during power up, reset OLED, sensor, and SD card supplies
+  Serial.println("Reset a-ldo1&2 and b-ldo1");
   if(ESP_SLEEP_WAKEUP_UNDEFINED == esp_sleep_get_wakeup_cause()){
     PMU.enableALDO1();
     PMU.enableALDO2();
@@ -57,44 +64,55 @@ bool power_init() {
   }
  
   //BME280 and OLED
+  Serial.println("Setting and enabling a-ldo1 for oled");
   PMU.setALDO1Voltage(3300);
   PMU.enableALDO1();
 
   //QMC6310U 
+  Serial.println("Setting and enabling a-ldo2 for QMC");
   PMU.setALDO2Voltage(3300);
   PMU.enableALDO2();          //disable to save power
 
   //SD card
+  Serial.println("Setting and enabling b-ldo2 for SD card");
   PMU.setBLDO1Voltage(3300);
   PMU.enableBLDO1();
 
   //Out to header pins
+  Serial.println("Setting and enabling b-ldo2 for output to header");
   PMU.setBLDO2Voltage(3300);
   PMU.enableBLDO2();
 
+  Serial.println("Setting and enabling dcdc4 for output to header");
   PMU.setDC4Voltage(XPOWERS_AXP2101_DCDC4_VOL2_MAX);    //1.8V
   PMU.enableDC4();
 
+  Serial.println("Setting and enabling dcdc5 for output to header");
   PMU.setDC5Voltage(3300);
   PMU.enableDC5();
 
   //Other power rails
+  Serial.println("Setting and enabling dcdc3 for ?");
   PMU.setDC3Voltage(3300);    //doesn't go anywhere in the schematic??
   PMU.enableDC3();
 
   //Unused power rails
+  Serial.println("Disabling unused supplies dcdc2, dldo1 and dldo2");
   PMU.disableDC2();
   PMU.disableDLDO1();
   PMU.disableDLDO2();  
 
   //Set charge current to 300mA
+  Serial.println("Setting battery charge current limit and voltage");
   PMU.setChargerConstantCurr(XPOWERS_AXP2101_CHG_CUR_300MA);
   PMU.setChargeTargetVoltage(XPOWERS_AXP2101_CHG_VOL_4V2);
 
   //enable battery voltage measurement
+  Serial.println("Enabling battery measurement");
   PMU.enableBattVoltageMeasure();
 
   //Reset and re-enable PMU interrupts
+  Serial.println("Re-enable interrupts");
   PMU.disableIRQ(XPOWERS_AXP2101_ALL_IRQ);
   PMU.clearIrqStatus();
   PMU.enableIRQ(
@@ -107,10 +125,12 @@ bool power_init() {
   //Set the power key off press time
   PMU.setPowerKeyPressOffTime(XPOWERS_POWEROFF_4S);
 
+  return true;
 }
 
 bool radio_init() {
   fallback_clock.begin();
+  Wire1.begin(PIN_BOARD_SDA1,PIN_BOARD_SCL1);
   rtc_clock.begin(Wire1);
   
 #ifdef SX126X_DIO3_TCXO_VOLTAGE