0a8a0a4904
* Refactor: removed duplicated radio_rng_seed(), radio_set_params(), radio_set_tx_power()
2026-05-01 14:47:07 +10:00
ffbf73dc5c
Merge pull request #2432 from recrof/kiss-radio-everywhere
...
kiss radio: added stm32 support + envs in platformio.ini
2026-05-01 00:36:46 +12:00
5beef490a0
add kiss radio env to most of the variants
2026-04-28 15:09:25 +02:00
958204c7f1
Merge branch 'dev' into lora-longer-preamble
2026-04-16 20:43:46 +10:00
8056344b86
fix(waveshare-rp2040): add SX126X_RXEN=17 to restore RX sensitivity
...
The Waveshare RP2040-LoRa board has an RF switch with two complementary
control lines:
- DIO2 (CTRL) -- driven automatically by the SX1262 chip: HIGH on TX,
LOW on RX
- GPIO17 (!CTRL) -- was not configured in MeshCore, so it floated and
the switch never properly selected the LNA/RX path
Without this pin driven, the RF switch never switches to RX mode,
resulting in completely degraded reception. TX was unaffected because
DIO2 alone is sufficient to activate the TX path.
Adding SX126X_RXEN=17 lets RadioLib drive GPIO17 as the complement of
DIO2, so the switch correctly routes the signal to the LNA on receive.
Reference: https://files.waveshare.com/wiki/RP2040-LoRa/Rp2040-lora-sch.pdf
2026-04-12 14:49:42 +02:00
f2b61f1ce5
Merge pull request #1425 from thomasabbott/tcxo_voltage_fix_rp2040
...
RP2040 Update SX126X_DIO3_TCXO_VOLTAGE to 1.8 V
2026-04-12 22:45:00 +12:00
f0ec5d2ae7
changed to set the preamble on radio settings change
2026-03-29 21:45:16 +11:00
75895895f0
Add USE_SX1262 flag to multiple platformio.ini configurations
2026-03-16 09:34:12 +00:00
9a95e25ef2
Remove unused RX boosted gain mode functions and related preprocessor directives across multiple variants
2026-03-05 18:38:57 +00:00
71136671bd
Implement remote lna toggle cli cmd
2026-02-10 15:02:23 +00:00
d0720c63c2
Allow negative tx power
...
Like SX1262 allows -9 dBm lowest, some allow lower but that probably
isn't useful
2026-02-06 02:24:51 +01:00
4e9c229093
fix: tcxo voltage 1.8 V for waveshare rp2040
2026-01-29 16:55:07 -08:00
5f31979e1e
Merge pull request #831 from Meshcore-Portugal/jbrazio/2025_87fe0ad8
...
Add bridge management CLI
2025-10-06 14:23:35 +02:00
13a0202062
Add BRIDGE_DEBUG flag
2025-10-06 12:57:32 +01:00
0307b6119e
increase MAX_NEIGHBOURS from 8 to 50
2025-09-28 16:11:58 +13:00
510472bfa0
Normalize repeater target names
2025-09-10 23:56:07 +01:00
7fca20475a
Merge remote-tracking branch 'upstream/dev' into jbrazio/2025_3f11ad35
2025-09-08 02:04:14 +01:00
04e70829a4
Rename RS232 bridge environments
2025-09-07 21:46:51 +01:00
5843a12c71
Rename SerialBridge to RS232Bridge
2025-09-05 11:28:40 +01:00
c2fc70047a
waveshare rp2040 lora cleanup
2025-09-03 21:37:07 +02:00
9fd7e9427a
Add bridge support for WSL3 board
2025-09-01 10:53:51 +01:00
7f142245e6
Merge remote-tracking branch 'origin/dev' into jbrazio/2025_3f11ad35
2025-08-22 23:00:35 +01:00
37d7257f04
* Heltec tracker, now using /ui-new
...
* variants with no DISPLAY_CLASS .ini fixes
2025-08-16 21:53:36 +10:00
331a29b082
Changed radio_init to use radio.std_init this also changes the preamble to 16 as before it was 8
2025-08-08 20:17:06 -07:00
85273a6dc6
Merge remote-tracking branch 'origin/dev' into jbrazio/2025_3f11ad35
2025-07-29 00:31:52 +01:00
6be8e19a9f
move radiolib wrappers to dedicated directory
2025-07-13 11:37:33 +02:00
04042e3ca0
Refactor serial bridge handling
2025-07-09 11:03:35 +01:00
2f77cef04b
Add config flags to variants
2025-06-29 16:28:11 +01:00
f3e85a6fba
Update SX126X_CURRENT_LIMIT
2025-06-16 16:57:43 +01:00
8f6b2b75d7
Waveshare RP2040-LoRa board support
2025-06-15 23:48:49 +01:00
Scott Powell