b1ca3d1eb1
* new PAYLOAD_TYPE_MULTIPART
...
* experimental double ACK's (at each hop), sent 300ms apart (direct mode only)
2025-06-23 01:14:08 +10:00
478a57a6bd
* AdvertDataParser: lat/lon can now be zeroes
2025-06-22 21:07:43 +10:00
12a2f34598
* companion serial protocol ver bump to 6
2025-06-22 21:03:30 +10:00
e7609364ea
Merge pull request #438 from liamcottle/storage/nrf52
...
Add support for storage stats on nRF52/LittleFS
2025-06-22 19:44:14 +10:00
583cdd4980
fix indentation
2025-06-22 21:38:35 +12:00
37c20a348e
add support for storage stats on nrf52
2025-06-22 21:35:21 +12:00
9df3c8c663
* companion: new 'advert_loc_policy' pref. Defaults to ADVERT_LOC_NONE (ie. do Not share location in adverts)
2025-06-22 16:21:04 +10:00
4f9207f3eb
Merge pull request #437 from jquatier/t114-display-flicker
...
Fix T114 display flicker
2025-06-22 15:15:04 +10:00
727a044dde
Merge pull request #436 from 446564/fix-nano-g2-ota-name
...
update nano g2 ultra BLE name for OTA
2025-06-22 15:11:30 +10:00
ea7a84b7a3
Merge pull request #427 from cod3doomy/dev
...
T-Beam refactor for radio.std_init
2025-06-22 15:07:59 +10:00
3719c0983c
increase delay slightly
2025-06-21 18:17:38 -07:00
d680852c99
fix t114 display flicker
2025-06-21 16:13:53 -07:00
ff10f37e7c
T-Beam removed redundancy
...
Removed redundant SPI begin calls
2025-06-21 14:18:38 -07:00
aa9eac16a6
Merge branch 'ripplebiz:dev' into dev
2025-06-21 14:12:29 -07:00
5f2ea7ca87
update nano g2 ultra BLE name for OTA
2025-06-21 11:28:47 -07:00
0bf03f2309
remove SPI set pins
2025-06-21 11:22:14 -07:00
1295c4633b
* companion: minor refactor of who should invoke UITask::loop()
2025-06-21 20:48:28 +10:00
39cc221125
Merge pull request #433 from oltaco/HeltecV3-GPS
...
Heltec v3 GPS support
2025-06-21 20:40:04 +10:00
205624824a
* added std_init() to CustomSX1268
2025-06-21 15:27:58 +10:00
80d2b6c6bc
Merge pull request #432 from oltaco/CustomLLCC68-std_init
...
added CustomLLCC68::std_init()
2025-06-21 13:56:41 +10:00
5b1f4b0166
Merge pull request #431 from mattsains/packet-structure
...
minor changes and fixes to docs
2025-06-21 13:54:53 +10:00
485749a053
Merge pull request #430 from oltaco/gps-update-fix
...
fix: EnvironmentSensorManager.cpp: don't update location if GPS is turned off
2025-06-21 13:49:07 +10:00
8090992342
Merge pull request #429 from oltaco/rak4631-radioinit-refactor
...
refactor: RAK4631 with CustomSX1262::std_init()
2025-06-21 13:48:22 +10:00
81a0816e22
Merge pull request #424 from 446564/fix-GH162
...
fix Heltec v2 getBattMilliVolts ADC multiplier
2025-06-21 13:42:03 +10:00
00b5d3bcd5
Merge pull request #423 from 446564/fix-GH133
...
heltec v3 update ADC multipler to fix voltage reading
2025-06-21 13:41:04 +10:00
7c421c1d2c
Merge pull request #420 from 446564/feat-GH142
...
return range with advert interval setting error
2025-06-21 13:40:27 +10:00
553e3c10f6
Merge pull request #419 from 446564/feat-GH44
...
add time and date feedback to cli commands
2025-06-21 13:36:30 +10:00
5d85ed41c3
Merge pull request #407 from fdlamotte/seeed_xiao_c6
...
Seeed xiao c6 support
2025-06-21 13:32:15 +10:00
4d2b176ccc
feature: GPS support on HeltecV3
...
GPS support via EnvironmentSensorManager. Connect GPS RX to pin 45, TX to pin 46.
Note that while you can disable using the GPS there is no way to power down the GPS without using a mosfet and adjusting PIN_GPS_EN.
2025-06-21 13:04:39 +10:00
1de5753a16
add advert detail
2025-06-20 19:41:07 -07:00
14ff7bfbcd
added std_init to CustomLLCC68.h
2025-06-21 11:03:25 +10:00
0d78df1b8a
minor changes and fixes to docs
2025-06-20 17:59:55 -07:00
83842e4b25
fix: EnvironmentSensorManager.cpp: don't update location if GPS is turned off.
...
previously the location would always snap to the last heard GPS location after GPS had been on.
2025-06-21 10:09:28 +10:00
9eff882e18
refactor: RAK4631 with CustomSX1262::std_init()
2025-06-21 09:52:39 +10:00
bf2908faa6
update nano g2 to use radio.std_init
2025-06-20 16:46:16 -07:00
7bcfbd3243
T-Beam refactor for radio.std_init
...
Changed radio init for both T-beam (SX1262) and Supreme (SX1262) to include radio.std_init()
2025-06-20 15:06:01 -07:00
52a579a366
fix Heltec v2 getBattMilliVolts
2025-06-20 15:00:46 -07:00
f4463154cf
allows manual BLE pin even when device has display
...
also updates remaining variants to use default of
123456 instead of 0 for random pin
2025-06-20 14:20:42 -07:00
e5ecf29d0c
return range with advert interval set error
...
updates both local and flood advert preference
setting errors to include the allowable range and
time units
2025-06-20 09:22:49 -07:00
f30698eacb
add time output to both clock sync and time <epoch> cli
2025-06-20 08:40:06 -07:00
dbee0d8b8e
update ADC multipler to fix voltage reading
2025-06-20 08:25:19 -07:00
7f0f3b7753
Merge pull request #418 from fdlamotte/xiao_nrf52-xiao_s3-techo_remove_lora_cr_fallback_from_target
...
remove LORA_CR fallback from target.cpp on xiao_nrf52, xiao_s3 and t-…
2025-06-20 18:37:16 +10:00
4579aa25d7
xiao_c6: fallback for LORA_CR is set in std_init
2025-06-20 09:51:35 +02:00
56e3bb153b
remove LORA_CR fallback from target.cpp on xiao_nrf52, xiao_s3 and t-echo
2025-06-20 09:47:58 +02:00
a7c959631f
* companion: added Datastore methods: getStorageUsedKb(), getStorageTotalKb()
...
* companion: CMD_GET_BATTERY now changed to CMD_GET_BATT_AND_STORAGE
2025-06-20 16:47:59 +10:00
85b164bcf1
* PicoW refactor, now using radio.std_init()
2025-06-20 16:42:49 +10:00
b37f61d720
Merge pull request #416 from jquatier/analog-button
...
Button handling fix
2025-06-20 14:58:19 +10:00
e6ba025f77
add new quad press
2025-06-19 21:52:57 -07:00
cdca6fa52a
Merge branch 'dev' into analog-button
2025-06-19 21:50:16 -07:00
61301daf51
Merge pull request #415 from jquatier/thinknode-std_init
...
Thinknode radio.std_init refactor
2025-06-20 13:48:48 +10:00
Scott Powell