Commit Graph
69 Commits
Author SHA1 Message Date
Scott Powell 89d805a02f * 2nd round of .ini refactors 2026-11-19 17:18:54 +11:00
Scott Powell adac387b0f * lotsa super boring refactoring 2026-11-19 15:22:23 +11:00
fdlamotte b8ae75d258 Merge pull request #3770 from lihardyextreme/feature-mdns
feat: mDNS ESP32 - enable local network discovery over mDNS
2026-11-10 12:07:18 -04:00
fdlamotte 62ae611afd Merge pull request #3753 from fdlamotte/gps_refactor
Big GPS refactor
2026-11-10 07:44:00 -04:00
Florent fe6a47d0c9 gps: move the gps CLI to GpsPrefs and convert all targets 2026-11-08 08:47:34 -04:00
agessaman 322cd638fb Merge remote-tracking branch 'upstream/dev' into feat/kiss-agc-fem-control 2026-11-06 20:38:01 -08:00
Li Hardy Extreme 9a2230b60e feat: mDNS ESP32 - enable local network discovery over mDNS 2026-11-06 00:10:59 +01:00
amdoolittle 9d93a72693 Added WiFi to TFT BLE version of Heltec V4 2026-10-16 22:39:26 -07:00
liamcottle c0d00a060a enable wifi interface for heltec v4 ble variant 2026-10-14 15:16:55 +13:00
agessaman 720f0f1528 kiss_modem: reach FEM gain through the board's radio.fem CLI commands
Boards own their FEM control through handleCommand() ("get/set
radio.fem.rxgain|txgain"). Use that instead of a parallel set of FEM
virtuals on MainBoard, so any board that implements the commands works
in KISS with no extra code.

- Remove the six FEM virtuals from MainBoard and the board overrides.
- KissModem talks to the board in one adapter. A gain counts as
  controllable only if "get" replies exactly "> on" or "> off". "set"
  is checked by reading the state back, never by its reply wording.
- SetFemState always replies with the read-back state once the
  requested bits pass the capability check.
- Guard the boards' prefs writes against a NULL store. KISS attaches
  no prefs, so "set radio.fem.*" would dereference NULL.
- Wio Tracker L1 1W TX gain is exposed again, matching its CLI.
2026-09-23 17:31:20 -07:00
agessaman 5527a26f9a kiss_modem: add AGC reset interval and FEM gain control (protocol v2)
Add SetHardware sub-commands so a host can probe and configure
per-board RF front-end settings:

- GetCapabilities (0x1B): uint32 feature bits (AGC, FEM RX, FEM TX)
- Set/GetAgcResetInterval (0x1C/0x1D): 0-1020 s, 4 s resolution,
  0 disables; default stays 30 s
- Set/GetFemState (0x1E/0x1F): apply/value masks for FEM RX (LNA)
  and TX (PA) gain; all-or-nothing, Unsupported (0x08) if any
  requested bit is not controllable on this board

The AGC scheduler moves from main.cpp into KissModem so it is
configurable and unit-tested. FEM changes that arrive mid-TX are
deferred until the packet ends, since board setters drive FEM pins
directly.

MainBoard gains virtual FEM hooks (canControl/set/is for LNA and PA
gain). Boards that already implemented these methods privately now
expose them as overrides: Heltec V4, V4 R8, T096, Tracker V2,
Station G3 and Wio Tracker L1 1W.

KISS_FIRMWARE_VERSION bumped to 2.
2026-09-23 15:43:01 -07:00
liamcottle cee43752c7 add new ENABLE_WIFI_INTERFACE build flag for companions without providing ssid and pwd 2026-09-08 22:54:50 +12:00
Michael Graff b11a779843 Address review: per-variant wifi src, real SSID reply, rename PicoW env 2026-09-06 21:28:04 -05:00
Scott Powell a1cf5bd806 * refactored 'FEM' commands for HeltecTrackerV2 & HeltecV4 2026-08-24 02:16:18 +10:00
liamcottle e7f2c71701 usb companion firmwares now require build flag to include usb interface 2026-07-28 03:45:02 +12:00
ViezeVingertjes fb2c61f862 fix: prevent ESP32 KISS modem stalls under USB backpressure
Switch ESP32-S3 KISS modem environments to HWCDC and move outbound KISS writes to a non-blocking queued frame path so loop() and TX completion keep progressing when the host reads slowly. Add native backpressure regression tests and correct the native_kiss_modem test filter so this suite runs directly with pio test.
2026-07-18 22:43:55 +02:00
Kevin Le 35f654ced3 Fixed hibernate/powerOff for ESP32 boards to stay at uA 2026-07-05 23:47:27 +07:00
Quency-D 12e6899580 Merge branch 'dev' into cli-lna-command 2026-05-09 18:19:31 +08:00
Scott Powell 0a8a0a4904 * Refactor: removed duplicated radio_rng_seed(), radio_set_params(), radio_set_tx_power() 2026-05-01 14:47:07 +10:00
Liam Cottle ffbf73dc5c Merge pull request #2432 from recrof/kiss-radio-everywhere
kiss radio: added stm32 support + envs in platformio.ini
2026-05-01 00:36:46 +12:00
Liam Cottle 5c651b35a0 Merge pull request #1954 from OverkillFPV/lora-longer-preamble
Lora longer preamble
2026-04-30 22:12:04 +12:00
Quency-D 696aae6ed1 Heltec boards have LNA disabled by default. 2026-04-29 16:20:21 +08:00
Rastislav Vysoky 5beef490a0 add kiss radio env to most of the variants 2026-04-28 15:09:25 +02:00
Quency-DandCopilot c42f6db0eb Revise according to the review comments.
Co-authored-by: Copilot <copilot@github.com>
2026-04-25 16:01:26 +08:00
Quency-D ddedb3c7a7 Merge branch 'dev' into cli-lna-command 2026-04-25 15:28:07 +08:00
Liam Cottle 9a1be5386d Merge pull request #2326 from IoTThinks/MCdev-Added-HeltecV4-Expansion-Kit-2026-04-16
Added support for Expansion Kit to Heltec V4 OLED repeaters
2026-04-25 00:14:12 +12:00
Marco e8907a3108 Add Heltec V4 set adc.multiplier 2026-04-19 15:29:43 +02:00
Kevin Le 992dddeee5 Added support for Expansion Kit to Heltec V4 OLED repeaters 2026-04-18 09:24:53 +07:00
OverkillFPV 958204c7f1 Merge branch 'dev' into lora-longer-preamble 2026-04-16 20:43:46 +10:00
Liam Cottle 3ff8b17660 Merge pull request #1833 from olanwe/set-wifi-offline-queue-sizes
Set OFFLINE_QUEUE_SIZE=256 for missing WiFi companion environments
2026-04-13 01:41:07 +12:00
overkillfpv f0ec5d2ae7 changed to set the preamble on radio settings change 2026-03-29 21:45:16 +11:00
Quency-D 8435464c84 Add v4 FEM LNA CLI control commands. 2026-03-24 10:48:15 +08:00
ripplebiz 7fa7ac24db Merge pull request #1867 from Quency-D/dev-heltec-v4.3
add heltec v4.3 board
2026-03-20 20:54:51 +11:00
João Brázio 274e00df50 Merge remote-tracking branch 'upstream/dev' into 2026/remote-lna 2026-03-16 09:37:55 +00:00
João Brázio 75895895f0 Add USE_SX1262 flag to multiple platformio.ini configurations 2026-03-16 09:34:12 +00:00
João Brázio 9a95e25ef2 Remove unused RX boosted gain mode functions and related preprocessor directives across multiple variants 2026-03-05 18:38:57 +00:00
João Brázio 8df87d5609 Merge remote-tracking branch 'upstream/dev' into 2026/remote-lna 2026-03-05 17:21:38 +00:00
Quency-D 241805e8c1 Fixed the compilation error of HeltecV4Board::begin. 2026-03-05 14:34:12 +08:00
Quency-D 8769c4b876 Merge branch 'dev' into dev-heltec-v4.3 2026-03-04 09:46:42 +08:00
Wessel Nieboer 67d22401b1 Pass rtc_clock to all MicroNMEALocationProvider instances
Enable GPS time synchronization across all variants by passing
&rtc_clock to MicroNMEALocationProvider. When GPS gets a valid
fix, the RTC clock is now updated automatically every 30 minutes.

Updated 16 variants: rak4631, lilygo_tbeam_SX1262, rak_wismesh_tag,
lilygo_tbeam_supreme_SX1262, thinknode_m3, heltec_v4, thinknode_m1,
lilygo_tbeam_SX1276, meshadventurer, nano_g2_ultra, heltec_v3,
promicro, xiao_c3, heltec_tracker_v2, keepteen_lt1, heltec_mesh_solar.
2026-03-03 15:45:07 +01:00
Wessel Nieboer 14f066bed0 Fix sleep 2026-03-02 11:34:42 +01:00
Wessel Nieboer 8b7fed65de default lna_enabled=true 2026-03-02 11:34:12 +01:00
Wessel Nieboer 2bb6f636a4 Add 1ms delay after powering PA (cold-boot) 2026-02-28 19:05:31 +01:00
Wessel Nieboer 329e408197 Hold GC1109 PA_POWER during deep sleep for LNA RX wake
The GC1109 FEM needs its VFEM_Ctrl pin held HIGH during deep sleep
to keep the LNA active, enabling proper RX sensitivity for
wake-on-packet. Without this, the LNA is unpowered during sleep
and RX wake sensitivity is degraded by ~17dB.

Release RTC holds in begin() after configuring GPIO registers
(not before) to ensure glitch-free pin transitions on wake.

Trade-off: ~6.5mA additional sleep current for significantly
improved wake-on-packet range.
2026-02-28 19:05:31 +01:00
Quency-D f0d37e552d Added version identification. 2026-02-27 16:49:00 +08:00
Quency-D 9312fe780a add heltec v4.3 2026-02-26 17:47:03 +08:00
Oliver Weyhmüller 82dd0cd996 Set OFFLINE_QUEUE_SIZE=256 for missing WiFi companion ESP envs 2026-02-24 22:26:24 +01:00
Kevin Le 13d0dff918 Reverted to use GPIO 17, 18 as I2C for Heltec v4 repeater 2026-02-18 22:38:24 +07:00
Kevin Le 44b80d00c2 Disabled periph_power for Heltec v4's display 2026-02-18 22:32:01 +07:00
Kevin Le f6603fe7a5 Set back PIN_VEXT_EN_ACTIVE=HIGH 2026-02-18 22:32:01 +07:00