Jaroslav Škarvada
07e7e2d44b
companion: Suspend radio when hibernating
...
This should significantly reduce power consumption in hibernation.
Fixes : #1014
Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com >
Signed-off-by: Frieder Schrempf <frieder@fris.de > # generalize for all radios and UIs
2025-11-22 15:05:01 +01:00
ripplebiz
f5a56c537f
Merge pull request #1113 from recrof/bme280_fix
...
fix: make bme280 sensor usable again
2025-11-19 15:39:48 +11:00
recrof
88a6141943
fix: move bme680 detection before bme280
2025-11-18 15:36:25 +01:00
ripplebiz
459169e8cb
Merge pull request #1092 from liquidraver/rakgps
...
Fix RAK4631 GPS UART pin macros for L76K to work
2025-11-17 14:04:09 +11:00
ripplebiz
caf421b591
Merge pull request #1106 from oltaco/keepteen-lt1
...
Add support for Keepteen LT1
2025-11-17 13:50:16 +11:00
Florent
838e83b3b5
xiao_s3: relocate serial pins on repeater_bridge_rs232
...
* conflicts with i2c pins that are documented on the same pins
* this is a commented target
2025-11-16 17:07:33 +01:00
Florent
3dd6dc02ea
xiao_s3: use environment sensor manager and add sensor role
2025-11-16 16:55:16 +01:00
taco
bc2256f232
Keepteen LT1: remove terminal_chat and sensor targets
2025-11-16 16:17:11 +11:00
taco
2058af8453
initial support: Keepteen LT1
2025-11-16 15:55:49 +11:00
ripplebiz
8dbb0f5f23
Merge pull request #1071 from tpp-at-idx/thinknode_m2
...
Thinknode_M2: better battery reading accuracy and no display on powerup fix
2025-11-14 15:11:06 +11:00
ripplebiz
ff67c786ef
Merge pull request #985 from liquidraver/dev3
...
Fix reversed GPS PINs on G2 and enable timesync
2025-11-14 14:34:23 +11:00
ripplebiz
11a0bd6ef1
Merge pull request #1035 from liquidraver/devt114
...
Add Heltec T114 GPS + timesync
2025-11-14 14:33:05 +11:00
Liam Cottle
9bfbb777a1
Merge pull request #1100 from stphnrdmr/dev
...
Allow SF smaller than 7 to be saved
2025-11-14 12:15:10 +13:00
Stephan Rodemeier
16c294ce60
Allow SF smaller than 7 to be saved
2025-11-13 22:25:55 +01:00
Scott Powell
91e9fcea4b
* ver 1.10.0
2025-11-13 20:45:38 +11:00
fdlamotte
750e955f19
Update library.json to latest libs and version
2025-11-13 10:39:20 +01:00
ripplebiz
a5cdc88fe2
Merge pull request #1064 from recrof/esp_contacts_350_channels_40
...
set max contacts to 350 and channels to 40 for esp32c3, s3 and c6
2025-11-12 00:49:05 +11:00
ripplebiz
ba6b8535c9
Merge pull request #971 from fdlamotte/remove_set_setting_by_key
...
SensorManager: remove setSettingByKey
2025-11-11 23:40:13 +11:00
liquidraver
b0ce00652f
Fix RAK4631 GPS UART pin macros
2025-11-11 13:00:27 +01:00
Florent
90e26129ee
Merge branch 'dev' into remove_set_setting_by_key
2025-11-11 12:23:12 +01:00
Scott Powell
b59d1999e6
* Sensor: DISCOVER_REQ, prefix_only support
2025-11-11 20:08:05 +11:00
ripplebiz
74f136ba7a
Merge pull request #1068 from fdlamotte/sensor_control_data
...
sensor: copy control data code from repeater
2025-11-11 20:03:33 +11:00
Scott Powell
ab0721d6df
* fix: repeater and room server telemetry requests now return all telemetry for _READ & _WRITE ACL permissions.
2025-11-09 16:36:23 +11:00
Scott Powell
b31d3e7b5f
* added StrHelper::fromHex()
2025-11-09 16:17:49 +11:00
Tomas P
a0bf66f9d8
Fix for display not coming on after poweron
2025-11-07 09:50:21 +01:00
Tomas P
429f82106b
tweak getBattMilliVolts to report battery more accurately
2025-11-07 09:48:57 +01:00
Tomas P
c0a51aff66
change ADC_MULTIPLIER to better reflect battery voltage
2025-11-07 09:47:18 +01:00
Scott Powell
1520f4d28e
* repeater, DISCOVER_REQ, flags lowest bit now for 'prefix_only' responses
2025-11-07 19:31:09 +11:00
Scott Powell
62d7ce110b
* packet format docs updated
2025-11-07 15:49:01 +11:00
Scott Powell
28b90c18cf
Merge branch 'transportcodes' into dev
2025-11-07 14:52:11 +11:00
Scott Powell
963290ea15
* repeater: various "region" CLI changes
...
* transport codes 0000 and FFFF reserved
2025-11-07 14:42:06 +11:00
Florent
06825030e5
sensor: copy control data code from repeater
2025-11-06 22:36:37 +01:00
Scott Powell
2e63499ae5
* companion: protocol ver bumped to 8.
2025-11-06 22:51:17 +11:00
Scott Powell
4a5404d997
* companion: added CMD_SEND_CONTROL_DATA, and PUSH_CODE_CONTROL_DATA
2025-11-06 22:10:20 +11:00
Scott Powell
ddac13ae80
* repeater: CLI, added "region put" and "region remove" commands
2025-11-06 21:40:52 +11:00
Scott Powell
256848208d
* repeater: onAnonDataRecv(), future code check bug fix (offset 4)
...
* sensor: onAnonDataRecv(), future request code provision
2025-11-06 20:22:40 +11:00
Scott Powell
09eab330a2
* repeater: onAnonDataRecv(), now rejecting non-ASCII password (preparing for future request codes)
...
* repeater: DISCOVER requests now with a simple RateLimiter (max 4, every 2 minutes)
2025-11-06 20:15:01 +11:00
Scott Powell
cf547da857
* RegionMap: get/set Home Region
...
* repeater: admin CLI, changed "allowf *", "denyf *", added "home"
2025-11-06 17:28:45 +11:00
ripplebiz
a9d245fe68
Merge pull request #1038 from adam2872/Analogue-button-fix-for-new-UI
...
Analogue user button fix for new UI
2025-11-06 15:41:45 +11:00
ripplebiz
23783b27c8
Merge pull request #1058 from dotdavid/dev
...
Fix Xiao S3 WIO board name
2025-11-06 13:45:12 +11:00
Scott Powell
7419ed71f7
* region filtering now applied in allowPacketForward()
2025-11-06 12:27:25 +11:00
Scott Powell
82b4c1e6b0
* new PAYLOAD_TYPE_CONTROL (11)
...
* repeater: onControlDataRecv(), now responds to new CTL_TYPE_NODE_DISCOVER_REQ (zero hop only)
* node prefs: new discovery_mod_timestamp (will be set to affect when node should respond to DISCOVERY_REQ's )
2025-11-06 00:56:54 +11:00
Scott Powell
3ef53e64a1
* is_name_char() bug fix
2025-11-05 15:34:23 +11:00
Scott Powell
937865c8fd
* companion: new CMD_SET_FLOOD_SCOPE (54)
2025-11-05 14:56:18 +11:00
Scott Powell
9ebeb477aa
* RegionMap: inverted 'flags' to _deny_ bits
...
* Mesh: new filterRecvFloodPacket() for overriding
* repeater CLI: 'allow' -> 'allowf' or 'denyf'
2025-11-05 14:34:44 +11:00
recrof
04c0c40b39
set max contacts to 350 and channels to 40 for esp32c3, s3 and c6
2025-11-04 23:58:32 +01:00
David Hall
c3dbec41ba
Fix manufacturer name on Seeed Xiao S3 WIO
2025-11-03 21:02:08 +00:00
David Hall
5c80334dbd
Fix manufacturer name on Seeed Xiao S3 WIO
2025-11-03 21:00:43 +00:00
Scott Powell
d9ff3a4d02
* Mesh: new sendFlood() overload with transport codes.
...
* BaseChatMesh: sendFloodScoped(), for overriding with some outbound 'scope' / TransportKey
* companion: new 'send_scope' variable.
2025-11-04 01:21:56 +11:00
Scott Powell
ecd30f4d36
* new CLI commands: region, region load, region save, region get, region allow
2025-11-03 22:53:14 +11:00
