entr0p1
2cb3a29fa8
SX1262 LDO Support
...
- Added build flag "SX126X_USE_REGULATOR_LDO" (set to 1 to enable) to use LDO for the SX1262 radio instead of DC-DC when the DCDC pin isn't wired up (e.g. t-echo lite)
- Added additional debug mode diagnostic messages during SX1262 init to better highlight faults
2026-06-30 16:55:16 +10:00
Liam Cottle and GitHub
1869b57d62
Merge pull request #2853 from HDDen/dev
...
Add Data-Type to number_allocations.md
2026-06-29 21:49:19 +12:00
HDDen
58b0f7df9c
Update number_allocations.md
2026-06-29 12:41:44 +03:00
HDDen
bc35208682
Update number_allocations.md
...
Added Data-Type range for MeshCore Images codec (range is for small reserve to future versions)
2026-06-28 00:32:22 +03:00
Scott Powell
4f8cb8db78
* ACK packets being 'clipped' (in Dispatcher send). Needed to extend max_airtime timeout calc for short packets
2026-06-27 21:06:01 +10:00
Liam Cottle and GitHub
5ff39c6243
Merge pull request #2570 from IoTThinks/MCdev-Fixed-flashmode-XiaoC6-202605
...
Added flash_mode=dio to avoid boot loop when flashing using merge.bin
2026-06-27 11:32:10 +12:00
Liam Cottle and GitHub
dc200cf22d
Merge pull request #2639 from sefinek/fix/typos-in-comments
...
fix: fix typos in source code comments
2026-06-27 11:26:54 +12:00
Liam Cottle and GitHub
62b95b4e48
Merge pull request #2844 from oltaco/fix-rx-boosted-gain
...
Fix for Rx boosted gain on LR1110
2026-06-27 11:22:47 +12:00
taco
f3d4d8cd5e
always save boosted gain setting
2026-06-26 22:36:49 +10:00
Liam Cottle and GitHub
3d4eec4a6a
Merge pull request #1194 from ViezeVingertjes/nibble_zero_connect
...
Added support for the nibble zero connect
2026-06-26 13:59:59 +12:00
taco
b07aba7937
fix: report error when rxgain setting is unsupported or rejected
2026-06-26 08:45:03 +10:00
taco
1f9bb67400
return bool when setting rx boost
2026-06-26 07:44:01 +10:00
ViezeVingertjes
b8f1fad654
Add trailing underscore to nibble_screen_connect env names to exclude from automatic builds
2026-06-25 23:27:07 +02:00
ViezeVingertjes
eb938a9b78
Address review comments and sync with dev
2026-06-25 23:26:55 +02:00
ViezeVingertjes
69df5c7a95
Remove NeoPixel configuration as its unused.
2026-06-25 23:26:55 +02:00
ViezeVingertjes
9c7d71b9be
Added support for the nibble zero connect
2026-06-25 23:26:55 +02:00
taco
5d0ff7fe6e
remove guard on MyMesh::setRxBoostedGain()
2026-06-26 07:06:37 +10:00
ripplebiz and GitHub
3192684582
Merge pull request #2752 from Quency-D/heltec-tower-v2
...
Add Heltec tower v2
2026-06-23 11:51:03 +10:00
ripplebiz and GitHub
aa1cb1f663
Merge pull request #2765 from fizzyfuzzle/ESP32-Reset-Reason
...
Add ESP32 Reset Reason to existing pwrmgt.bootreason cli command
2026-06-23 11:41:57 +10:00
ripplebiz and GitHub
6a63dfce1c
Merge pull request #2771 from oltaco/nrf52-framework-buildfix
...
Point Heltec Mesh Solar and Mesh Pocket at our NRF52 framework fork
2026-06-23 11:37:03 +10:00
Liam Cottle and GitHub
c2cfba4af3
Merge pull request #2810 from IoTThinks/MCDev-Fixed-GPS-Time-for-T114-202606
...
Fixed GPS time sync for Heltec T114
2026-06-22 14:19:09 +12:00
Kevin Le
62849ef114
Fixed GPS time sync for Heltec T114
2026-06-22 09:13:36 +07:00
ripplebiz and GitHub
60ea4a91bf
Merge pull request #1727 from weebl2000/use-hardware-channel-activity-detection
...
Use hardware channel activity detection for checking interference
2026-06-15 19:51:59 +10:00
taco
dd9b3b32c3
build fix for Heltec Mesh Solar and Mesh Pocket
2026-06-15 00:57:12 +10:00
Wessel Nieboer
7c8e092457
Have CAD be a separate toggle (set cad on/off)
2026-06-14 15:20:58 +02:00
Wessel Nieboer and Wessel Nieboer
099ef67348
Prevent packet errors from growing
2026-06-14 15:19:20 +02:00
Wessel Nieboer and Wessel Nieboer
04a6c7009a
Just check for not channel free
2026-06-14 15:19:19 +02:00
Wessel Nieboer and Wessel Nieboer
813d108c7a
Also return busy if preamble detected
2026-06-14 15:19:19 +02:00
Wessel Nieboer
4f9a091671
Use hardware channel activity detection for checking interference
2026-06-14 15:19:18 +02:00
Marco
e7db7c5a94
Add ESP32 Reset Reason
2026-06-14 11:41:01 +02:00
Huw Duddy and GitHub
29f0a7fc4f
Merge pull request #2763 from meshcore-dev/anon-contacts-fix
...
* fix for anon contacts when full
2026-06-14 19:11:38 +10:00
Scott Powell
2e73fe948e
* fix for anon lastmod
2026-06-14 18:54:51 +10:00
Scott Powell
538ac38e18
* fix for counter in RESP_CODE_CONTACTS_START
2026-06-14 18:39:34 +10:00
Scott Powell
c2d223ff55
* now handle the case where onAdvertRecv() should _replace_ the anon contact slot
2026-06-14 18:12:08 +10:00
Scott Powell
07648e3344
* fix for anon contacts when full
2026-06-14 17:50:41 +10:00
ripplebiz and GitHub
a5cb0c25ca
Merge pull request #2140 from Quency-D/cli-lna-command
...
Add CLI control to LoRa's fem LNA.
2026-06-13 22:00:08 +10:00
Quency-D
5300fa18c7
Restore companion NodePrefs file ending
2026-06-13 17:40:11 +08:00
Quency-D
3ee58fd2e3
Remove companion FEM RX gain command IDs
2026-06-13 17:31:54 +08:00
Scott Powell
d5f74e93c5
* PAYLOAD_TYPE_PATH bad path_len now rejected
2026-06-13 18:19:41 +10:00
Quency-D
1c4c995a41
Fix low power consumption issues
2026-06-13 16:00:06 +08:00
Quency-D
d2d3d44c9b
Add maximum power limit
2026-06-12 18:05:27 +08:00
Quency-D
fe56d01da2
add tower v2 PA control
2026-06-12 17:58:19 +08:00
Quency-D and GitHub
190dbb5293
Merge pull request #13 from meshcore-dev/dev
...
merge Dev
2026-06-11 15:30:31 +08:00
Quency-D and GitHub
9100a58671
Merge branch 'dev' into cli-lna-command
2026-06-10 11:30:04 +08:00
ripplebiz and GitHub
5f3b7f25d0
Merge pull request #2722 from liamcottle/fix/free-packet-on-parse-failure
...
Fix: CMD_SEND_RAW_PACKET not freeing packet on parse failure
2026-06-08 22:47:06 +10:00
liamcottle
ae0bb7ee95
use releasePacket instead of _mgr->free
2026-06-09 00:42:58 +12:00
liamcottle
07bfe90695
free packet on parse failure
2026-06-09 00:31:48 +12:00
Scott Powell
07a3ca9e05
Merge branch 'dev'
...
# Conflicts:
# docs/faq.md
companion-v1.16.0
room-server-v1.16.0
repeater-v1.16.0
2026-06-06 21:12:43 +10:00
Scott Powell
8c0d5c5b24
* version 1.16.0
2026-06-06 21:09:38 +10:00
ripplebiz and GitHub
74adda6316
Merge pull request #2702 from meshcore-dev/flood.max.advert
...
new CLI config: flood.max.advert
2026-06-06 21:05:22 +10:00