5dcc377b77
Rewrite KISS modem to be fully spec-compliant
2026-02-07 08:51:52 +01:00
c1c9848569
Merge pull request #1596 from jbrazio/2026/t114-sensors
...
Refactor Heltec T114 sensor management
2026-02-07 14:17:15 +11:00
6502067368
Merge pull request #1591 from agessaman/fix-kiss-noise-floor
...
fix(kiss): periodic noise floor calibration and AGC reset
2026-02-07 14:08:26 +11:00
c0b81b9ad8
Clean up comments on kiss noise floor changes.
2026-02-05 09:46:30 -08:00
18473333df
Merge remote-tracking branch 'upstream/dev' into 2026/t114-sensors
2026-02-05 13:36:22 +00:00
5cb26b91f6
Refactor Heltec T114 sensor management
2026-02-05 13:35:04 +00:00
76a46a74e9
Merge pull request #1562 from oltaco/nrf52-sleep-repeater
...
Add Low-Power Sleep for nRF52 Boards
2026-02-05 13:16:47 +11:00
4b9d5462bb
Merge pull request #1532 from oltaco/esp32board.h-removewifi
...
Refactor ESP32Board.h to save ~500 bytes of DRAM
2026-02-05 13:09:04 +11:00
0fb570338f
fix(kiss): periodic noise floor calibration and AGC reset
...
- Trigger noise floor calibration every 2s and AGC reset every 30s in main loop.
- Reorder loop to match Dispatcher: calibrate + radio.loop() before AGC reset
and recvRaw() so RSSI is never sampled right after startReceive().
- Update protocol doc with calibration intervals and typical noise floor range.
- Variant platformio.ini updates (heltec_v3, rak4631).
2026-02-03 20:58:39 -08:00
598489be47
refactor ui with ring buffer and display most recent
2026-02-04 09:38:05 +11:00
e03f311e51
Merge pull request #1545 from ViezeVingertjes/kiss-modem-firmware
...
Add KISS-like Modem example and protocol documentation
2026-02-03 12:33:19 +11:00
f0ba14ff75
Remove sync word handling from KissModem.
2026-02-02 18:05:26 +01:00
a342ab8437
nrf52: allow repeater to sleep when idle
2026-02-01 14:51:27 +11:00
240b5ea1e3
Refactor KissModem to integrate radio and sensor management directly, removing callback dependencies.
2026-01-31 15:15:19 +01:00
1bcb52bab3
Add new commands and responses for RSSI, channel status, airtime, noise floor, statistics, battery, and sensors.
2026-01-31 15:05:25 +01:00
8d5eaf500d
add makeBlobPath inline helper for esp32
2026-02-01 00:02:30 +11:00
e6e1b810f8
add DataStore::deleteBlobByKey()
2026-02-01 00:02:29 +11:00
c786cfe613
Add KISS Modem firmware
2026-01-31 10:22:32 +01:00
06a83c0453
Merge pull request #1531 from agessaman/add-recv-errors-stats
...
Add recv_errors to CMD_GET_STATS STATS_TYPE_PACKETS response
2026-01-30 20:57:07 +13:00
019bbf74d3
Add recv_errors to CMD_GET_STATS STATS_TYPE_PACKETS response
...
Append uint32_t recv_errors (RadioLib receive/CRC errors) to packet stats
binary frame. Frame size 26 -> 30 bytes. Update stats_binary_frames.md and
Python/TypeScript parsing examples for backward compatibility (accept >=26).
2026-01-29 20:44:11 -08:00
c7eea3915d
fix: remove esp_wifi.h from esp32board.h
...
saves ~500 bytes of dram and allows Tbeam to compile again
2026-01-30 15:07:40 +11:00
cf7d95c6de
Merge pull request #1509 from stevenlafl/tbeam-1w
...
Add LilyGO T-Beam 1W Support
2026-01-30 14:55:17 +11:00
c345f1da8e
Revert "Remove _serial->isConnected() logic from buzzer notifications"
2026-01-30 00:12:04 +01:00
465776d667
* ver 1.12.0
2026-01-29 21:12:31 +11:00
44e7c092c8
Add battery min/max voltage parameter support
2026-01-28 22:24:49 -07:00
d81616ec68
Merge pull request #1476 from mattzzw/region_via_LoRa
...
Add cli command `region list {allowed|denied}`, enable output of region cmd via remote cli
2026-01-27 11:07:22 +11:00
0805a47f35
Add output of region cmd via lora cli
...
Add cli commands "region list {allowed|denied}"
2026-01-26 17:44:43 +01:00
d13bc446de
added build flag to enable/disable boot advert
2026-01-26 22:39:39 +13:00
ed589f9620
boot adverts are now zero hop instead of flood
2026-01-26 22:20:36 +13:00
4b7684c7df
Merge pull request #1477 from Cisien/dev
...
Expose a counter to track RadioLib receive errors
2026-01-26 19:04:48 +11:00
c16bcd2fe3
Expose a counter to track RadioLib receive errors
...
This change counts when readData returns an err code other than RADIOLIB_ERR_NONE. In most cases this is going to be a CRC error. This counter is exposed in the `stats-packets` command, and in the repeater stats payload (4 additional bytes to the payload, which is now 56 bytes with this change. My incompetent robot claims the total payload size is 96 bytes (unverified but probably close).
2026-01-24 20:06:29 -08:00
153bcdc6a3
Merge pull request #1457 from oltaco/remote-set-prvkey
...
Allow set prv.key over LoRa, clear ACL and validate key
2026-01-25 14:46:41 +11:00
96ef5e5efe
allow set prv.key from remote, validate new prv.key
2026-01-25 01:32:48 +11:00
988287bfd7
recalc ClientACL shared_secrets at startup
2026-01-25 01:32:44 +11:00
6336bd5b72
refactor ClientACL and CommonCLI, add ClientACL::clear()
2026-01-25 01:31:53 +11:00
9dd52bd0cc
build fix for room server with MESH_DEBUG=1
2026-01-23 23:43:05 +11:00
3c27132914
* T1000e BLE - default node name is now the MAC address
2026-01-23 15:53:58 +11:00
d68bc74514
Remove _serial->isConnected() logic from buzzer notifications
2026-01-20 20:19:10 -06:00
b919119faf
only write contacts when changed
2026-01-16 13:15:35 +11:00
c61fde9328
always send PUSH_CODE_NEW_ADVERT when advert was not added to contacts[]
2026-01-16 13:15:35 +11:00
df6687034a
bootstrap RTC from contact.lastmod and improve slot overwrite logic
...
slot overwrite logic can now safely use contact.lastmod to find oldest contact for overwrite
2026-01-15 18:01:20 +11:00
403ce1db08
contacts: granular autoadd and overwrite-oldest
2026-01-15 18:01:20 +11:00
69a71d0e25
* repeater login response, FIRMWARE_VER_LEVEL now bumped to 2
2026-01-12 17:47:51 +11:00
b6110eee38
* new req/resp (after login): REQ_TYPE_GET_OWNER_INFO (includes firmware-ver)
...
* ANON_REQ_TYPE_OWNER, firmware-ver removed (security exploit)
* ANON_REQ_TYPE_BASIC, formware-ver removed, just remote clock + some 'feature' bits
* CTL_TYPE_NODE_DISCOVER_REQ now ingored if 'repeat off' has been set
2026-01-12 16:58:35 +11:00
4e4f6d92a0
* ANON_REQ_TYPE_VER_OWNER now delimited by newline chars
2026-01-09 16:32:08 +11:00
65796c8f20
* CommonCLI: added "set name ..." validation
...
* ANON_REQ_TYPE_VER_OWNER, now removes commas from node_name
2026-01-09 16:28:08 +11:00
fd69acb421
* new ANON_REQ_TYPE_VER (for just simple clock + ver info)
2026-01-09 13:54:18 +11:00
2a035ad816
* ANON_REQ_TYPE_VER_OWNER, now includes node_name
2026-01-09 13:20:20 +11:00
5475043083
* new ANON_REQ_TYPE_VER_OWNER
...
* CommonCLI: new "get/set owner.info ..."
2026-01-09 11:07:31 +11:00
5cc44dd802
* ANON_REQ_TYPE_REGIONS now direct only, with reply_path encoded in request
2026-01-08 13:20:52 +11:00
ViezeVingertjes