63fe3d42a2
Corrects typos and grammatical errors
...
Improves readability across documentation and inline comments by fixing common spelling mistakes and duplicate words.
2026-05-20 08:33:48 +02:00
e1616ff29d
Remove static BLE_PIN_CODE definition from Heltec E290_usb configuration
2026-05-15 13:09:59 +02:00
973321d9b1
Disable BLE_PIN_CODE for E290 companion USB environment
...
Remove the hardcoded BLE_PIN_CODE build flag from the Heltec_E290_companion_ble
environment. The presence of BLE_PIN_CODE prevents the unit from operating as a
USB companion. Commenting it out allows dynamic PIN generation and enables USB
companion functionality.
2026-05-15 12:57:36 +02:00
0db7715430
Merge pull request #2497 from oltaco/reduce-esp32-dram
...
Reduce dram0_0 usage on older ESP32 boards
2026-05-15 14:04:42 +10:00
f4be34a997
Merge pull request #2515 from Cisien/station-g3-esp32
...
Add support for Station G3 and its software configurable LNA/PA1
2026-05-15 13:58:42 +10:00
68363d9e4d
revert: "feat: Enable GPS on RAK 1W kit" ( #2401 )
...
reverted changes to RAK_BOARD and PIN_GPS_EN. setting `RAK_BOARD` would cause radio to stop working and end with RadioLib error -707
2026-05-12 15:56:28 +02:00
b0b87fd709
fix gps pins for lilygo t impulse plus
2026-05-12 10:36:19 +12:00
c4523f71a9
Merge pull request #2522 from liamcottle/board/lilygo-t-impulse-plus
...
Add support for LilyGo T-Impulse-Plus
2026-05-12 01:39:44 +12:00
2fdbfbdbf6
turn off 3.3v rail when powering off
2026-05-12 01:06:22 +12:00
a49ee6ebe9
fix battery voltage reading
2026-05-11 22:17:53 +12:00
242c45f4a3
initial support for lilygo t impulse plus
2026-05-11 22:05:06 +12:00
6d3b71eed9
add heltec-mesh-node-t1
2026-05-11 15:11:07 +08:00
3eacc49489
Merge pull request #2503 from jirogit/fix/techo-lite-non-shell-usb
...
feat(techo-lite): add USB companion radio target for non-shell variant
2026-05-10 22:40:12 +10:00
75fb07fc2c
Add support for Station G3 and its software configurable LNA and PA1
2026-05-09 13:53:20 -07:00
77bd994a61
T-Echo Lite LoRa radio fixes
...
- Set TCXO voltage to 1.8 (not defined previously, falls back to default)
- Set correct variable name for SX1262 RX/TX pins
- Fix SX1262 RX pin number
2026-05-09 14:26:55 +10:00
5a6fd4c16a
feat(techo-lite): add USB companion radio target for non-shell variant
2026-05-08 00:38:04 -07:00
b612ba49f2
reduce dram0_0 usage by lowering OFFLINE_QUEUE_SIZE
...
some older ESP32 boards were pushing the limits of the dram segment causing the linker to fail, especially for ble and wifi firmwares.
lowering OFFLINE_QUEUE_SIZE reduces dram usage
2026-05-08 00:40:33 +10:00
0a8a0a4904
* Refactor: removed duplicated radio_rng_seed(), radio_set_params(), radio_set_tx_power()
2026-05-01 14:47:07 +10:00
d7e3a9ddba
Merge branch 'dev' into minewsemi-refactor
2026-04-30 14:48:49 +02:00
ffbf73dc5c
Merge pull request #2432 from recrof/kiss-radio-everywhere
...
kiss radio: added stm32 support + envs in platformio.ini
2026-05-01 00:36:46 +12:00
5c651b35a0
Merge pull request #1954 from OverkillFPV/lora-longer-preamble
...
Lora longer preamble
2026-04-30 22:12:04 +12:00
daa50e9469
Merge pull request #2426 from recrof/nano-g2-rework
...
make g2 more in line with other variants
2026-04-30 16:57:58 +12:00
2522492cd7
Merge pull request #2436 from chrisdavis2110/rak3401-comp-ana-button
...
feat: Add support for PIN_USER_BTN_ANA on rak3401 companion usb and companion ble envs
2026-04-30 16:57:00 +12:00
696aae6ed1
Heltec boards have LNA disabled by default.
2026-04-29 16:20:21 +08:00
5fbd473298
added PIN_GPS_EN=-1 to rak3401 companion usb
2026-04-28 21:59:10 -07:00
0265851621
added PIN_USER_BTN_ANA for rak3401 companion usb and companion ble
2026-04-28 21:26:56 -07:00
5beef490a0
add kiss radio env to most of the variants
2026-04-28 15:09:25 +02:00
66009069cd
standardize the minewsemi variant
2026-04-28 13:53:35 +02:00
d8f3d59d82
Merge pull request #2427 from recrof/tabs-to-spaces
...
replace all intendation tabs to spaces in pio ini files
2026-04-28 22:39:31 +12:00
b963681830
replace all intendation tabs to spaces in pio ini files
2026-04-28 12:37:30 +02:00
12d9cc3752
make g2 more in line with other variants
2026-04-28 12:24:45 +02:00
0396cf6771
Merge pull request #2383 from IoTThinks/MCdev-Added-XiaoS3-202604
...
Added Xiao S3 variant
2026-04-28 14:23:42 +10:00
70212fb5cc
Merge pull request #2401 from zevaryx/rak-3401-gps
...
feat: Enable GPS on RAK 1W kit
2026-04-28 13:57:55 +12:00
b91f127e4e
fix: correct device model name for Heltec Wireless Paper
2026-04-26 00:23:09 -07:00
40d7fcfc26
Merge pull request #2157 from aXistem-dev/fix/sensecap-solar-tx-led-12
...
fix(sensecap_solar): correct TX LED after remap & power-button pin changes
2026-04-25 18:03:53 +10:00
835b0e9114
fix(sensecap_solar): init LED_WHITE LOW to prevent always-on at boot
2026-04-25 09:47:44 +02:00
7f38e3f145
feat: Enable GPS on RAK 1W kit
2026-04-24 20:24:50 -06:00
9a1be5386d
Merge pull request #2326 from IoTThinks/MCdev-Added-HeltecV4-Expansion-Kit-2026-04-16
...
Added support for Expansion Kit to Heltec V4 OLED repeaters
2026-04-25 00:14:12 +12:00
277331381e
Added Xiao S3 variant.
...
This is for Xiao S3 and a normal Wio SX1262 for Xiao shield.
2026-04-24 11:56:06 +07:00
5372388e6e
Merge pull request #2353 from jirogit/fix/techo-lite-non-shell-ble-clean
...
feat(techo-lite): add Non-Shell companion BLE variant
2026-04-22 20:25:32 +12:00
dc548578ff
Merge pull request #2287 from pelgraine/fix/techo-lite-battery
...
Fixes #1183 — T-Echo Lite incorrect battery voltage
2026-04-22 20:23:21 +12:00
d3b457681a
Merge pull request #2008 from weebl2000/p_lora_reset_rak4631
...
Fix RAK4631 SX1262 hardware pin config
2026-04-22 19:45:06 +12:00
66fe9ac2db
Fix FEM/LNA enbaled by default for Heltec T096, Heltec Wireless Tracker v2
...
Should only really be disabled when it causes issues.
2026-04-22 09:30:00 +02:00
d516cd8a9e
Fixes #1183 — T-Echo Lite incorrect battery voltage
...
Battery (TechoBoard.h/cpp): Added PIN_VBAT_MEAS_EN (P0.31) — the T-Echo
Lite has a gated voltage divider that must be enabled before reading. Also
added pinMode(PIN_VBAT_READ, INPUT) before each ADC read to reclaim P0.02
from other peripherals. Pin definitions hardcoded from LilyGo's
t_echo_lite_config.h.
I2C (variant.h): Corrected SDA/SCL from P0.04/P0.02 to P1.04/P1.02 per
LilyGo's IIC_1_SDA/IIC_1_SCL. The old P0.02 mapping conflicted with the
battery ADC pin.
GPS (variant.h): Corrected all five GPS pin assignments to match LilyGo's
config — UART TX/RX, wake, PPS, and power enable were all scrambled.
SPI (variant.h): Fixed SPI_INTERFACES_COUNT from _PINNUM(0, 2) to (2).
Tested on T-Echo Lite Non-Shell (USB-C, no display). Battery readings match
Heltec V4 reference within 10mV.
2026-04-22 12:56:15 +10:00
07671cf1fe
Implement proper shutdown procedure for R1 neo
...
fixes #2361
2026-04-21 21:29:18 +02:00
28b1586fd7
feat(techo-lite): add Non-Shell (screenless) companion BLE variant
...
T-Echo Lite Non-Shell has no ePaper display, but the existing
companion BLE env inherits DISPLAY_CLASS=GxEPDDisplay from the base
env. This causes display.begin() to run on non-existent hardware,
corrupting BLE initialization and generating a random PIN that
cannot be displayed, making BLE connection impossible.
Add LilyGo_T-Echo-Lite_non_shell_companion_radio_ble env that:
- excludes DISPLAY_CLASS and ePaper-related build flags
- removes GxEPDDisplay.cpp and ui-new from build sources
- uses static BLE_PIN_CODE=123456 (avoids random PIN generation)
Also fix boards/t-echo.json:
- add nrfutil to upload protocols list
- add use_1200bps_touch=true and wait_for_upload_port=true
to enable reliable flashing via PlatformIO upload button
2026-04-20 21:08:08 -07:00
e8907a3108
Add Heltec V4 set adc.multiplier
2026-04-19 15:29:43 +02:00
3fcf5b548b
fix(sensecap_solar): set P_LORA_TX_LED to 12 after LED remap
...
Align TX activity LED with LED_BLUE / variant.h after LED definition
and power-button pin mapping changes.
2026-04-19 11:20:28 +02:00
35b5548c0c
Merge pull request #2328 from recrof/xiao_c3-companion-fix
...
fix: remove sensors from xiao c3 companion because of bootloops
2026-04-18 20:44:15 +10:00
54a48da6b5
Merge pull request #2306 from petrkr/otaupdate2
...
SDK3.x: Fix OTA includes, bump Async version
2026-04-18 19:56:56 +12:00
Mark Jocas