dandri/MeshCore
1
0
Fork 0
mirror of https://github.com/meshcore-dev/MeshCore.git synced 2026-08-14 11:39:48 +00:00
Code Issues Packages Projects Releases Wiki Activity
3,016 Commits 14 Branches 101 Tags
7a2764ebd64d74812e91d351b6008631368b1376
Commit Graph
3016 Commits
This Branch
This Branch
All Branches
Author SHA1 Message Date
Nick Dunklee 7a2764ebd6 Added Heltec t096 and seeed t1000-e 
Tested Heltec t096 and Seeed t1000-e, both support this
hardware feature.
 2026-06-24 15:58:09 -06:00
Nick Dunklee 4ac8742ce0 feat: use RAK hardware crypto on advert processing 
While working on some sensor code implementations, I ran into
some hard crashes that root-caused to the 4KB loop task stack
being exhausted.

Looking for various optimization schemes resulted in this relatively
low-lift fix. RAK3401 and RAK4631 both support hardware crypto.

Rather than loading in one of the two software crypto libs,
we can just use the onboard hardware. This is faster, should
consume less power, and in testing used a scant up to 700
bytes in the run loop vs 2.5-3KB per advert.

This change **only** affects advert verification processing, which
currently consumes a significant chunk of the 4KB run loop.

I figured such a change should likely be implemented in phases.

After soaking, this hardware crypto verification
process could be implemented across the entire MeshCore
cryptographic function on RAK nodes. Also possible other nodes
have available hardware crypto, however, I have not checked,
so future improvements may also exist there.

Tested on:
  - RAK3401 RAK 1W
  - RAK4631 19001
 2026-06-23 11:39:20 -06:00
ripplebizandGitHub 3192684582 Merge pull request #2752 from Quency-D/heltec-tower-v2 
Add Heltec tower v2
 2026-06-23 11:51:03 +10:00
ripplebizandGitHub aa1cb1f663 Merge pull request #2765 from fizzyfuzzle/ESP32-Reset-Reason 
Add ESP32 Reset Reason to existing pwrmgt.bootreason cli command
 2026-06-23 11:41:57 +10:00
ripplebizandGitHub 6a63dfce1c Merge pull request #2771 from oltaco/nrf52-framework-buildfix 
Point Heltec Mesh Solar and Mesh Pocket at our NRF52 framework fork
 2026-06-23 11:37:03 +10:00
Liam CottleandGitHub c2cfba4af3 Merge pull request #2810 from IoTThinks/MCDev-Fixed-GPS-Time-for-T114-202606 
Fixed GPS time sync for Heltec T114
 2026-06-22 14:19:09 +12:00
Kevin Le 62849ef114 Fixed GPS time sync for Heltec T114 2026-06-22 09:13:36 +07:00
ripplebizandGitHub 60ea4a91bf Merge pull request #1727 from weebl2000/use-hardware-channel-activity-detection 
Use hardware channel activity detection for checking interference
 2026-06-15 19:51:59 +10:00
taco dd9b3b32c3 build fix for Heltec Mesh Solar and Mesh Pocket 2026-06-15 00:57:12 +10:00
Wessel Nieboer 7c8e092457 Have CAD be a separate toggle (set cad on/off) 2026-06-14 15:20:58 +02:00
Wessel NieboerandWessel Nieboer 099ef67348 Prevent packet errors from growing 2026-06-14 15:19:20 +02:00
Wessel NieboerandWessel Nieboer 04a6c7009a Just check for not channel free 2026-06-14 15:19:19 +02:00
Wessel NieboerandWessel Nieboer 813d108c7a Also return busy if preamble detected 2026-06-14 15:19:19 +02:00
Wessel Nieboer 4f9a091671 Use hardware channel activity detection for checking interference 2026-06-14 15:19:18 +02:00
Marco e7db7c5a94 Add ESP32 Reset Reason 2026-06-14 11:41:01 +02:00
Huw DuddyandGitHub 29f0a7fc4f Merge pull request #2763 from meshcore-dev/anon-contacts-fix 
* fix for anon contacts when full
 2026-06-14 19:11:38 +10:00
Scott Powell 2e73fe948e * fix for anon lastmod 2026-06-14 18:54:51 +10:00
Scott Powell 538ac38e18 * fix for counter in RESP_CODE_CONTACTS_START 2026-06-14 18:39:34 +10:00
Scott Powell c2d223ff55 * now handle the case where onAdvertRecv() should _replace_ the anon contact slot 2026-06-14 18:12:08 +10:00
Scott Powell 07648e3344 * fix for anon contacts when full 2026-06-14 17:50:41 +10:00
ripplebizandGitHub a5cb0c25ca Merge pull request #2140 from Quency-D/cli-lna-command 
Add CLI control to LoRa's fem LNA.
 2026-06-13 22:00:08 +10:00
Quency-D 5300fa18c7 Restore companion NodePrefs file ending 2026-06-13 17:40:11 +08:00
Quency-D 3ee58fd2e3 Remove companion FEM RX gain command IDs 2026-06-13 17:31:54 +08:00
Scott Powell d5f74e93c5 * PAYLOAD_TYPE_PATH bad path_len now rejected 2026-06-13 18:19:41 +10:00
Quency-D 1c4c995a41 Fix low power consumption issues 2026-06-13 16:00:06 +08:00
Quency-D d2d3d44c9b Add maximum power limit 2026-06-12 18:05:27 +08:00
Quency-D fe56d01da2 add tower v2 PA control 2026-06-12 17:58:19 +08:00
Quency-DandGitHub 190dbb5293 Merge pull request #13 from meshcore-dev/dev 
merge Dev
 2026-06-11 15:30:31 +08:00
Quency-DandGitHub 9100a58671 Merge branch 'dev' into cli-lna-command 2026-06-10 11:30:04 +08:00
ripplebizandGitHub 5f3b7f25d0 Merge pull request #2722 from liamcottle/fix/free-packet-on-parse-failure 
Fix: CMD_SEND_RAW_PACKET not freeing packet on parse failure
 2026-06-08 22:47:06 +10:00
liamcottle ae0bb7ee95 use releasePacket instead of _mgr->free 2026-06-09 00:42:58 +12:00
liamcottle 07bfe90695 free packet on parse failure 2026-06-09 00:31:48 +12:00
Scott Powell 07a3ca9e05 Merge branch 'dev' 
# Conflicts:
#	docs/faq.md
companion-v1.16.0 room-server-v1.16.0 repeater-v1.16.0 		2026-06-06 21:12:43 +10:00
Scott Powell 8c0d5c5b24 * version 1.16.0 2026-06-06 21:09:38 +10:00
ripplebizandGitHub 74adda6316 Merge pull request #2702 from meshcore-dev/flood.max.advert 
new CLI config: flood.max.advert
 2026-06-06 21:05:22 +10:00
Scott Powell 8fc2da5c98 * default now 8, per the will of the peoples. 2026-06-06 21:00:58 +10:00
Liam CottleandGitHub b6454d6251 Merge pull request #2703 from IoTThinks/Fixed-powersaving--in-cli_commands.md-2026-06 
Change default power saving setting to 'off'
 2026-06-06 16:09:27 +12:00
IoTThinksandGitHub 6a9a84e8a5 Change default power saving setting to 'off' 2026-06-06 11:04:36 +07:00
Scott Powell 5f6821bb66 * new CLI config: flood.max.advert (default 16) 2026-06-06 13:09:24 +10:00
Scott Powell 397ac6144f * number allocations: Ripple range reserved 2026-06-06 12:45:35 +10:00
ripplebizandGitHub 53d50aa1ef Merge pull request #2684 from oltaco/rp2040-build-fixes 
Build fixes for some RP2040 targets
 2026-06-05 12:30:08 +10:00
Liam CottleandGitHub 1485d3301b Merge pull request #2463 from NoodlesNZ/fix-stddef 
Add stddef.h to fix compilation issue on MacOS
 2026-06-05 11:29:44 +12:00
Liam CottleandGitHub 5222ee4d13 Merge pull request #2685 from oltaco/more-build-fixes 
Build fixes for nibble_screen_connect and ThinkNode M2
 2026-06-05 03:08:10 +12:00
taco b4b0a0ee0f build fixes for nibble_screen_connect and thinknode_m2 2026-06-05 00:55:02 +10:00
taco 7ce8b66718 build fix for rp2040 companion usb 2026-06-04 23:36:51 +10:00
taco 33ce1c991c add missing radio_init() for rak11310 2026-06-04 23:30:50 +10:00
taco 2a8bd3edad pin platform-raspberrypi to 4e22a0d 
pins framework-arduinopico @ 1.50600.0+sha.6a1d13e9
 2026-06-04 23:21:41 +10:00
Liam CottleandGitHub b4038529b5 Merge pull request #2683 from oltaco/techo-card-buildfixes 
build fixes for LilyGo T-Echo Card
 2026-06-04 21:40:11 +12:00
taco 2f221acd37 build fixes for LilyGo T-Echo Card 2026-06-04 19:05:58 +10:00
Liam CottleandGitHub da21d42a2e Merge pull request #2672 from meshcore-dev/non-contact-requests 
Non contact requests
 2026-06-04 16:05:47 +12:00