0a8a0a4904
* Refactor: removed duplicated radio_rng_seed(), radio_set_params(), radio_set_tx_power()
2026-05-01 14:47:07 +10:00
ffbf73dc5c
Merge pull request #2432 from recrof/kiss-radio-everywhere
...
kiss radio: added stm32 support + envs in platformio.ini
2026-05-01 00:36:46 +12:00
5c651b35a0
Merge pull request #1954 from OverkillFPV/lora-longer-preamble
...
Lora longer preamble
2026-04-30 22:12:04 +12:00
696aae6ed1
Heltec boards have LNA disabled by default.
2026-04-29 16:20:21 +08:00
5beef490a0
add kiss radio env to most of the variants
2026-04-28 15:09:25 +02:00
9a1be5386d
Merge pull request #2326 from IoTThinks/MCdev-Added-HeltecV4-Expansion-Kit-2026-04-16
...
Added support for Expansion Kit to Heltec V4 OLED repeaters
2026-04-25 00:14:12 +12:00
e8907a3108
Add Heltec V4 set adc.multiplier
2026-04-19 15:29:43 +02:00
992dddeee5
Added support for Expansion Kit to Heltec V4 OLED repeaters
2026-04-18 09:24:53 +07:00
958204c7f1
Merge branch 'dev' into lora-longer-preamble
2026-04-16 20:43:46 +10:00
3ff8b17660
Merge pull request #1833 from olanwe/set-wifi-offline-queue-sizes
...
Set OFFLINE_QUEUE_SIZE=256 for missing WiFi companion environments
2026-04-13 01:41:07 +12:00
f0ec5d2ae7
changed to set the preamble on radio settings change
2026-03-29 21:45:16 +11:00
7fa7ac24db
Merge pull request #1867 from Quency-D/dev-heltec-v4.3
...
add heltec v4.3 board
2026-03-20 20:54:51 +11:00
274e00df50
Merge remote-tracking branch 'upstream/dev' into 2026/remote-lna
2026-03-16 09:37:55 +00:00
75895895f0
Add USE_SX1262 flag to multiple platformio.ini configurations
2026-03-16 09:34:12 +00:00
9a95e25ef2
Remove unused RX boosted gain mode functions and related preprocessor directives across multiple variants
2026-03-05 18:38:57 +00:00
8df87d5609
Merge remote-tracking branch 'upstream/dev' into 2026/remote-lna
2026-03-05 17:21:38 +00:00
241805e8c1
Fixed the compilation error of HeltecV4Board::begin.
2026-03-05 14:34:12 +08:00
8769c4b876
Merge branch 'dev' into dev-heltec-v4.3
2026-03-04 09:46:42 +08:00
67d22401b1
Pass rtc_clock to all MicroNMEALocationProvider instances
...
Enable GPS time synchronization across all variants by passing
&rtc_clock to MicroNMEALocationProvider. When GPS gets a valid
fix, the RTC clock is now updated automatically every 30 minutes.
Updated 16 variants: rak4631, lilygo_tbeam_SX1262, rak_wismesh_tag,
lilygo_tbeam_supreme_SX1262, thinknode_m3, heltec_v4, thinknode_m1,
lilygo_tbeam_SX1276, meshadventurer, nano_g2_ultra, heltec_v3,
promicro, xiao_c3, heltec_tracker_v2, keepteen_lt1, heltec_mesh_solar.
2026-03-03 15:45:07 +01:00
14f066bed0
Fix sleep
2026-03-02 11:34:42 +01:00
8b7fed65de
default lna_enabled=true
2026-03-02 11:34:12 +01:00
2bb6f636a4
Add 1ms delay after powering PA (cold-boot)
2026-02-28 19:05:31 +01:00
329e408197
Hold GC1109 PA_POWER during deep sleep for LNA RX wake
...
The GC1109 FEM needs its VFEM_Ctrl pin held HIGH during deep sleep
to keep the LNA active, enabling proper RX sensitivity for
wake-on-packet. Without this, the LNA is unpowered during sleep
and RX wake sensitivity is degraded by ~17dB.
Release RTC holds in begin() after configuring GPIO registers
(not before) to ensure glitch-free pin transitions on wake.
Trade-off: ~6.5mA additional sleep current for significantly
improved wake-on-packet range.
2026-02-28 19:05:31 +01:00
f0d37e552d
Added version identification.
2026-02-27 16:49:00 +08:00
9312fe780a
add heltec v4.3
2026-02-26 17:47:03 +08:00
82dd0cd996
Set OFFLINE_QUEUE_SIZE=256 for missing WiFi companion ESP envs
2026-02-24 22:26:24 +01:00
13d0dff918
Reverted to use GPIO 17, 18 as I2C for Heltec v4 repeater
2026-02-18 22:38:24 +07:00
44b80d00c2
Disabled periph_power for Heltec v4's display
2026-02-18 22:32:01 +07:00
f6603fe7a5
Set back PIN_VEXT_EN_ACTIVE=HIGH
2026-02-18 22:32:01 +07:00
71136671bd
Implement remote lna toggle cli cmd
2026-02-10 15:02:23 +00:00
3f33455b4d
Merge pull request #1570 from Quency-D/fix-heltec-power-consumption
...
Fix heltec-v4 power consumption
2026-02-09 16:49:49 +11:00
d0720c63c2
Allow negative tx power
...
Like SX1262 allows -9 dBm lowest, some allow lower but that probably
isn't useful
2026-02-06 02:24:51 +01:00
e15503d50d
Fix low power consumption issues
2026-02-02 14:19:42 +08:00
31fbb679d5
Merge branch 'dev' into heltecv4-register1
2026-01-29 09:12:35 -06:00
c7ac16f0e3
Add v4-tft code.
2026-01-26 13:48:15 +08:00
46e4cc06e3
Revert boosted gain flag to original
2026-01-21 21:12:54 -06:00
4575800e40
Turn on register 0x8B5 LSB for improved RX, turn off boosted gain
2026-01-14 17:52:15 -06:00
d4a2e5789f
OFFLINE_QUEUE_SIZE for Heltec Wifi companions
...
OFFLINE_QUEUE_SIZE missing from h3/h4 wifi companions, causing them only store 16 messages.
2026-01-06 14:49:15 +00:00
3ddfdd477b
Revert "add heltec_v4 tft expansion box"
...
This reverts commit 310618e689
2025-11-27 21:34:52 +11:00
310618e689
add heltec_v4 tft expansion box
2025-11-19 11:43:52 +08:00
04c0c40b39
set max contacts to 350 and channels to 40 for esp32c3, s3 and c6
2025-11-04 23:58:32 +01:00
27e5f6e7df
Merge pull request #885 from ViezeVingertjes/fix/heltec-v4-max-tx-power
...
Add MAX_LORA_TX_POWER build flag for Heltec V4 configuration
2025-10-09 12:39:21 +11:00
5f31979e1e
Merge pull request #831 from Meshcore-Portugal/jbrazio/2025_87fe0ad8
...
Add bridge management CLI
2025-10-06 14:23:35 +02:00
13a0202062
Add BRIDGE_DEBUG flag
2025-10-06 12:57:32 +01:00
c568edc8d0
Add MAX_LORA_TX_POWER build flag for Heltec V4 configuration
2025-10-04 23:04:47 +02:00
e48f3a58ae
Remove WITH_ESPNOW_BRIDGE_SECRET definition from platformio.ini files and update documentation to use _prefs->bridge_secret
2025-10-03 00:23:09 +01:00
0307b6119e
increase MAX_NEIGHBOURS from 8 to 50
2025-09-28 16:11:58 +13:00
669bea04a0
add heltec_v4 board.
2025-09-22 19:58:27 +08:00
Scott Powell