dandri/MeshCore
1
0
Fork 0
mirror of https://github.com/meshcore-dev/MeshCore.git synced 2026-08-14 09:29:49 +00:00
Code Issues Packages Projects Releases Wiki Activity
3,231 Commits 14 Branches 101 Tags
a7426de0bf938c089531e5e2b2177d989fbc07e7
Commit Graph
3231 Commits
This Branch
This Branch
All Branches
Author SHA1 Message Date
taco a7426de0bf LR1110: fix unnecessary IRQ clear 2026-07-29 23:18:15 +10:00
ripplebizandGitHub 9f73fbf870 Merge pull request #3062 from oltaco/fix-irq-clear 
Fix unnecessary IRQ clearing
 2026-07-29 22:37:30 +10:00
taco 20f55a4f42 fix unnecessary IRQ clear 2026-07-29 21:39:56 +10:00
Liam CottleandGitHub adc631f315 Merge pull request #3048 from entr0p1/fix/startota-failure-recovery 
nRF52840 "start ota" Failure Recovery
 2026-07-28 15:36:48 +12:00
entr0p1 4050b7d526 nRF52840 "start ota" Failure Recovery 
If Bluefruit.begin fails, BLE OTA mode won't actually start and the board might require a reboot to reattempt.

Fixes:
- Bluefruit.begin returns false in NRF52Board.startOTAUpdate if OTA mode fails to start. User is notified of the fault through existing error message in CommonCLI and can reattempt "start ota" command.
 2026-07-28 10:14:59 +10:00
ripplebizandGitHub c86e63d2f5 Merge pull request #2982 from meshcore-dev/config-serializer 
Config serializer
 2026-07-27 17:58:03 +10:00
ripplebizandGitHub 301bc10dd3 Merge pull request #3034 from meshcore-dev/ui-color-refactor 
UI color refactor
 2026-07-27 17:45:12 +10:00
Liam CottleandGitHub cee6d94894 Merge pull request #3040 from blowfishpro/docs/FixPayloadDocsFormatting 
Increase header levels on "Payloads" documentation page to fix table of contents
 2026-07-27 14:13:09 +12:00
Talia b62b421456 docs: increase header levels on payloads page to fix table of contents 
mkdocs will only consider the first H1 (if any) and subheaders under it for the table of contents

this increases the header levels of everything below "important concepts" by 1 so that the table of contents correctly resolves them
 2026-07-26 15:55:27 -07:00
ripplebizandGitHub e3de413a69 Merge pull request #3036 from oltaco/add-preamble-irq-flag 
Fix missing PREAMBLE_DETECTED IRQ flag for all radio wrappers
 2026-07-25 01:40:19 +10:00
taco 6b83de507d SX1268: add PREAMBLE_DETECTED to reported irq flags 2026-07-25 00:46:39 +10:00
taco 0d2b988f24 STM32WLx: add PREAMBLE_DETECTED to reported irq flags 2026-07-25 00:46:39 +10:00
taco c56928347f LLCC68: add PREAMBLE_DETECTED to reported irq flags 2026-07-25 00:46:39 +10:00
taco ea5d7c8bf5 LR1110: add PREAMBLE_DETECTED to reported irq flags 2026-07-25 00:46:36 +10:00
taco fae4803158 SX1262: add PREAMBLE_DETECTED to reported irq flags 2026-07-25 00:38:44 +10:00
Scott Powell f83ad03e5e * T114 display fix 2026-07-24 18:35:56 +10:00
Scott Powell 0c04a47355 * fixed for mono ST7789 display driver 2026-07-24 15:31:22 +10:00
Scott Powell 3857f45826 * monochrome displays now do _not_ invert titlebar 2026-07-24 15:14:56 +10:00
Scott Powell ee79df4c4f Merge branch 'dev' into config-serializer 
# Conflicts:
#	test/mocks/Arduino.h
#	test/mocks/Stream.h
 2026-07-24 15:06:48 +10:00
Liam CottleandGitHub e780cca237 Merge pull request #3033 from liamcottle/board/lilygo-tbeam-sx1276 
Increase LilyGo T-Beam SX1276 channels from 8 to 40
 2026-07-24 15:34:19 +12:00
liamcottle 520fa77f4f increase tbeam sx1276 max group channels from 8 to 40 2026-07-24 15:31:01 +12:00
Liam CottleandGitHub d531a98da1 Merge pull request #2819 from ViezeVingertjes/fix/kiss-modem-usb-backpressure 
fix: prevent ESP32 KISS modem stalls under USB backpressure
 2026-07-24 11:51:34 +12:00
Liam CottleandGitHub 8a69f34101 Merge pull request #3023 from agessaman/fix/rx-boosted-gain 
fix(room_server): support RX boosted gain
 2026-07-23 03:22:41 +12:00
Scott Powell 56274db4ad * build fixes for old ESP32 boards 2026-07-22 19:52:23 +10:00
Scott Powell a96a66aa99 * build fixes for NullDisplayDriver 2026-07-22 18:55:59 +10:00
Scott Powell b8504e55c6 * refactor of Color mapping in UITasks / DisplayDrivers 
* color displays now with a new light theme
 2026-07-22 16:03:33 +10:00
agessaman a71cc23854 fix(room_server): support RX boosted gain 
The room server never supported RX boosted gain, while the repeater
does. Three consequences on SX1262/SX1268 boards:

- boosted gain was never applied to the radio at boot, so a room server
  ran in power-saving RX mode while an identical repeater ran boosted -
  a real receive-sensitivity difference with nothing pointing at it
- _prefs.rx_boosted_gain was never initialised (the prefs are memset to
  0 before defaults are set), so it defaulted to off
- 'set radio.rxgain on' replied "Error: unsupported" but CommonCLI had
  already written the value to prefs and saved them, so a stale setting
  survived reboot and was never applied

Mirror the repeater's implementation: initialise the pref default under
the same USE_SX1262/USE_SX1268 and SX126X_RX_BOOSTED_GAIN guards, apply
it during radio init, and override setRxBoostedGain() so the CLI reports
success and takes effect.

Built Heltec_v3_room_server (SX1262) and LilyGo_T3S3_sx1276_room_server
(guards compile out cleanly).
 2026-07-21 12:23:20 -07:00
Scott Powell 78240e9477 * optimised: value-init not needed 2026-07-21 19:22:09 +10:00
ripplebizandGitHub 4157e43ace Merge pull request #3005 from axhoff/agent/fix-ble-reconnect 
Fix bonded BLE reconnects on ESP32
 2026-07-21 19:17:34 +10:00
ripplebizandGitHub 8b048ab19a Merge pull request #3007 from axhoff/agent/synchronize-ble-receive-queue 
Synchronize the ESP32 BLE receive queue
 2026-07-21 18:10:37 +10:00
ripplebizandGitHub 6a15e1712b Merge pull request #3006 from axhoff/agent/fix-heltec-v4-usb-companion 
Enable hardware USB serial on Heltec V4
 2026-07-21 17:54:22 +10:00
Liam CottleandGitHub 7124fa1439 Merge pull request #2815 from UltimateCodeWarrior/fix/tbeam-supreme-v3-oled-i2c 
Fix blank OLED on T-Beam Supreme V3 (I2C bus init + 0x3D address)
 2026-07-21 19:17:32 +12:00
Alexander Hoffer 4d4d7c3746 refactor: use FreeRTOS BLE receive queue 2026-07-21 07:17:01 +01:00
=UltimateCodeWarrior 0de2b4fc5f Move Supreme OLED address to variant config 
Keep SH1106Display generic by relying on DISPLAY_ADDRESS while the T-Beam Supreme variant declares its 0x3D OLED address.
 2026-07-20 19:24:38 -07:00
fdlamotteandGitHub d2fd1fdaa6 Merge pull request #2887 from spinda/thinknode-m3-dev 
Fix GPS and LEDs on ThinkNode M3
 2026-07-20 17:42:30 -04:00
fdlamotteandGitHub 427cd7c263 Merge pull request #2987 from entr0p1/fix/nrf52-shutdownperipherals 
NRF52Board - ShutdownPeripherals() housekeeping
 2026-07-20 11:53:56 -04:00
Alexander Hoffer 9fd6b419e5 fix: preserve bonded BLE reconnects 2026-07-20 15:47:03 +01:00
Alexander Hoffer 60030469c9 fix: enable Heltec V4 USB serial 2026-07-20 15:47:03 +01:00
Alexander Hoffer 3885c67c8e fix: synchronize BLE receive queue 2026-07-20 15:47:03 +01:00
Liam CottleandGitHub da67328017 Merge pull request #2990 from entr0p1/fix/xiao-nrf52-userbtn 
Fix Xiao nRF52840 repeater compile failure
 2026-07-21 02:09:33 +12:00
entr0p1 d2bbe4d8d3 Fix Xiao nRF52840 repeater compile failure 
Compile fails due to user_btn not declared in board target.

Fixes:
- Add MomentaryButton declaration for user_btn in variants/xiao_nrf52/target.cpp
- Add momentary button helper include in variants/xiao_nrf52/target.h
- Add extern linkage for MomentaryButton -> user_btn in variants/xiao_nrf52/target.h
 2026-07-20 22:43:25 +10:00
Liam CottleandGitHub a45dae928c Merge pull request #3000 from oltaco/rx-irq-timeout 
fix: clear the correct IRQ flag for timeout on preamble detected on SX1262
 2026-07-20 23:32:12 +12:00
taco ab5c45f516 fix: clear the correct IRQ flag for timeout on preamble detected 2026-07-20 21:05:12 +10:00
Liam CottleandGitHub c1ee9cad5b Merge pull request #2998 from oltaco/heltec-t1-bodmer 
Fix: Heltec t1: add missing bodmer TFT_eSPI library
 2026-07-20 22:39:17 +12:00
taco 91e65af9dd fix: heltec t1: add missing bodmer TFT_eSPI library 2026-07-20 20:28:38 +10:00
Liam CottleandGitHub 2834121b6e Merge pull request #2994 from oltaco/rx-irq-timeout 
Add setter methods for preambleMillis and maxPayloadMillis on SX1262 and LR1110
 2026-07-20 22:07:36 +12:00
taco 121b72712b LR1110: add setter methods for preambleMillis and payloadMillis 2026-07-20 19:52:57 +10:00
taco ae48072ff0 SX1262: add setter methods for preambleMillis and payloadMillis 2026-07-20 19:52:57 +10:00
Liam CottleandGitHub fdd4d8a610 Merge pull request #2989 from rgregg/fix-nrf52-ethernet-build 
Fix nRF52 builds broken by unconditional RAK Ethernet include
 2026-07-20 20:58:26 +12:00
liamcottle 8c987c8689 Merge remote-tracking branch 'official/main' into dev 2026-07-20 20:42:09 +12:00