b91f127e4e
fix: correct device model name for Heltec Wireless Paper
2026-04-26 00:23:09 -07:00
40d7fcfc26
Merge pull request #2157 from aXistem-dev/fix/sensecap-solar-tx-led-12
...
fix(sensecap_solar): correct TX LED after remap & power-button pin changes
2026-04-25 18:03:53 +10:00
835b0e9114
fix(sensecap_solar): init LED_WHITE LOW to prevent always-on at boot
2026-04-25 09:47:44 +02:00
9a1be5386d
Merge pull request #2326 from IoTThinks/MCdev-Added-HeltecV4-Expansion-Kit-2026-04-16
...
Added support for Expansion Kit to Heltec V4 OLED repeaters
2026-04-25 00:14:12 +12:00
5372388e6e
Merge pull request #2353 from jirogit/fix/techo-lite-non-shell-ble-clean
...
feat(techo-lite): add Non-Shell companion BLE variant
2026-04-22 20:25:32 +12:00
dc548578ff
Merge pull request #2287 from pelgraine/fix/techo-lite-battery
...
Fixes #1183 — T-Echo Lite incorrect battery voltage
2026-04-22 20:23:21 +12:00
d3b457681a
Merge pull request #2008 from weebl2000/p_lora_reset_rak4631
...
Fix RAK4631 SX1262 hardware pin config
2026-04-22 19:45:06 +12:00
f1f1361fd5
Merge pull request #2340 from weebl2000/fem-enabled-def
...
Fix FEM/LNA enbaled by default for Heltec T096, Heltec Wireless Tracker v2
2026-04-22 19:33:29 +12:00
bdae60498c
Merge pull request #2016 from weebl2000/add-lr1110-sx1276
...
Add sanity build for LR1110 and SX1276 too
2026-04-22 19:30:12 +12:00
66fe9ac2db
Fix FEM/LNA enbaled by default for Heltec T096, Heltec Wireless Tracker v2
...
Should only really be disabled when it causes issues.
2026-04-22 09:30:00 +02:00
cc6139bc23
Merge pull request #2371 from weebl2000/r1-neo-shutdown
...
Implement proper shutdown procedure for R1 neo
2026-04-22 19:22:46 +12:00
d516cd8a9e
Fixes #1183 — T-Echo Lite incorrect battery voltage
...
Battery (TechoBoard.h/cpp): Added PIN_VBAT_MEAS_EN (P0.31) — the T-Echo
Lite has a gated voltage divider that must be enabled before reading. Also
added pinMode(PIN_VBAT_READ, INPUT) before each ADC read to reclaim P0.02
from other peripherals. Pin definitions hardcoded from LilyGo's
t_echo_lite_config.h.
I2C (variant.h): Corrected SDA/SCL from P0.04/P0.02 to P1.04/P1.02 per
LilyGo's IIC_1_SDA/IIC_1_SCL. The old P0.02 mapping conflicted with the
battery ADC pin.
GPS (variant.h): Corrected all five GPS pin assignments to match LilyGo's
config — UART TX/RX, wake, PPS, and power enable were all scrambled.
SPI (variant.h): Fixed SPI_INTERFACES_COUNT from _PINNUM(0, 2) to (2).
Tested on T-Echo Lite Non-Shell (USB-C, no display). Battery readings match
Heltec V4 reference within 10mV.
2026-04-22 12:56:15 +10:00
07671cf1fe
Implement proper shutdown procedure for R1 neo
...
fixes #2361
2026-04-21 21:29:18 +02:00
d532481f34
Merge pull request #2335 from fizzyfuzzle/v4_adc_mult
...
Add Heltec V4 set adc.multiplier functionality
2026-04-21 18:06:42 +12:00
28b1586fd7
feat(techo-lite): add Non-Shell (screenless) companion BLE variant
...
T-Echo Lite Non-Shell has no ePaper display, but the existing
companion BLE env inherits DISPLAY_CLASS=GxEPDDisplay from the base
env. This causes display.begin() to run on non-existent hardware,
corrupting BLE initialization and generating a random PIN that
cannot be displayed, making BLE connection impossible.
Add LilyGo_T-Echo-Lite_non_shell_companion_radio_ble env that:
- excludes DISPLAY_CLASS and ePaper-related build flags
- removes GxEPDDisplay.cpp and ui-new from build sources
- uses static BLE_PIN_CODE=123456 (avoids random PIN generation)
Also fix boards/t-echo.json:
- add nrfutil to upload protocols list
- add use_1200bps_touch=true and wait_for_upload_port=true
to enable reliable flashing via PlatformIO upload button
2026-04-20 21:08:08 -07:00
3d982711a6
* CommonCLI: more reply bounds checking
2026-04-21 12:12:47 +10:00
db7baa7bd7
* CommonCLI: bounds check added to "unknown config:" replies
2026-04-21 12:07:39 +10:00
e8907a3108
Add Heltec V4 set adc.multiplier
2026-04-19 15:29:43 +02:00
3fcf5b548b
fix(sensecap_solar): set P_LORA_TX_LED to 12 after LED remap
...
Align TX activity LED with LED_BLUE / variant.h after LED definition
and power-button pin mapping changes.
2026-04-19 11:20:28 +02:00
dee3e26ac0
Merge branch 'dev'
...
# Conflicts:
# docs/faq.md
2026-04-19 11:35:03 +10:00
3751785400
* version 1.15.0
2026-04-19 11:27:55 +10:00
49b37d5622
* minor bounds fix
2026-04-18 21:32:41 +10:00
35b5548c0c
Merge pull request #2328 from recrof/xiao_c3-companion-fix
...
fix: remove sensors from xiao c3 companion because of bootloops
2026-04-18 20:44:15 +10:00
54a48da6b5
Merge pull request #2306 from petrkr/otaupdate2
...
SDK3.x: Fix OTA includes, bump Async version
2026-04-18 19:56:56 +12:00
0899f66034
fix: remove sensors from xiao c3 companion because of bootloops
2026-04-18 09:42:27 +02:00
acdb41fcf9
Merge pull request #2103 from robekl/docs-radio-rxgain
...
docs: add radio.rxgain command reference
2026-04-18 19:05:43 +12:00
352fe5f4ae
Merge pull request #2315 from jirogit/fix/wireless-paper-companion-usb
...
feat: add USB Companion Radio env for Heltec Wireless Paper
2026-04-18 18:45:38 +12:00
cfe4b0b9a5
bleuart service stay registered first to prevent gatt cache issues on android when already paired
2026-04-18 14:43:47 +12:00
992dddeee5
Added support for Expansion Kit to Heltec V4 OLED repeaters
2026-04-18 09:24:53 +07:00
77d737beb9
Merge pull request #2323 from txkbaldlaw/updated-companion-dfu-from-mt
...
Add support for Companion BLE OTA updates on nRF devices
2026-04-18 12:17:16 +12:00
96a16c238a
Additional Update to FAQs regarding Companion OTA
2026-04-17 16:17:12 -05:00
4f9764b1b4
Update FAQ to include Companion OTA DFU updates
2026-04-17 10:56:51 -05:00
d7a3d41843
Merge branch 'default-scope' into dev
2026-04-17 16:30:19 +10:00
91f3fa0bdf
* CLI: 'region put ...' now defaults to flood allowed
2026-04-17 15:11:10 +10:00
7cdb056cb3
* CLI: 'region default ...' now auto-creates the region
2026-04-17 15:02:04 +10:00
77d02e844f
* bug fix
2026-04-17 14:38:03 +10:00
d3ba89c8bb
* doco: "region default"
2026-04-17 13:49:57 +10:00
b898e7a04e
Add DFU to BLE Stack
2026-04-16 16:04:30 -05:00
df1e12de3e
* Repeater, room server: rule change for sendFloodReply()
2026-04-16 13:22:39 +10:00
230c9af87b
feat: add USB Companion Radio env for Heltec Wireless Paper
2026-04-15 19:43:51 -07:00
d2fdd6fad4
* companion: FIRMWARE_VER_CODE now bumped to 11
2026-04-15 20:47:17 +10:00
576e9dfd45
* bug fix
2026-04-15 15:44:22 +10:00
4131a455a2
* repeater: refactored 'region' CLI commands -> CommonCLI
...
* room server: added RegionMap, and new CommonCLI wiring, default_scope handling
* sensor: only minimal RegionMap wiring. Still needs work to handle default-scope
2026-04-15 13:32:49 +10:00
e6c6282d40
Variants: Enable ElegantOTA on ESP32-C6 devices
2026-04-14 15:40:31 +02:00
3a9e1086af
SDK3.x: Fix OTA includes, bump Async version
2026-04-14 15:28:11 +02:00
569cfe177a
* repeater: default-scope support
2026-04-14 17:51:34 +10:00
9f680d1744
Merge pull request #2302 from recrof/patch-2
...
xiao nrf52 companion usb: Add OFFLINE_QUEUE_SIZE=256
2026-04-14 18:36:50 +12:00
bd05eca9f5
Add OFFLINE_QUEUE_SIZE=256 for xiao nrf52 companion usb
2026-04-13 21:09:56 +02:00
49221fc159
Merge pull request #2298 from TheMalkavien/fix/waveshare-rp2040-rx-sensitivity
...
Fixes #2294 : RX path not enabled on Waveshare RP2040
2026-04-14 01:36:26 +10:00
efdd2b6a6c
* companion: simplified the CMD_GET / CMD_SET _DEFAULT_FLOOD_SCOPE
2026-04-13 23:11:21 +10:00
me