bc5d648204
* contacts sync fix
...
* fix for reusing transient/anon contacts only
2026-06-01 19:04:42 +10:00
d9df8307ca
* first draft
2026-06-01 16:49:31 +10:00
d8686b224d
Merge pull request #2643 from disq/companion-display-keep-on-when-powered
...
companion_radio: Add optional `KEEP_DISPLAY_ON_USB` flag to keep display on while powered 🤖 🤖
2026-06-01 13:18:34 +10:00
b259fbd01b
* power saving: hasPendingWork() now also checks if there's a pending contacts write
2026-05-31 18:52:42 +10:00
54c111609a
Merge pull request #2286 from IoTThinks/MCdev-PowerSaving-for-nrf52-companion-202604
...
Added Power Saving for NRF52 companions to have extra 30% battery life
2026-05-31 18:49:46 +10:00
bb781ff10a
companion_radio: opt-in KEEP_DISPLAY_ON_USB to keep OLED on while powered
...
AUTO_OFF_MILLIS is a power-save feature aimed at battery use. When the
board reports isExternalPowered() == true (USB or other DC source),
blanking the screen serves no purpose — there's nothing to conserve.
But OLEDs are vulnerable to burn-in with static content, so this
behaviour is gated behind a new build flag KEEP_DISPLAY_ON_USB. Default
is unchanged from upstream — the display blanks after AUTO_OFF_MILLIS
on USB or battery. Variants that ship with an LCD instead of an OLED
(e.g. heltec_t096) can opt in by adding -D KEEP_DISPLAY_ON_USB to
their env, gaining always-on-while-powered without exposing OLED users
to burn-in risk.
When the flag is enabled, the implementation refreshes _auto_off every
loop iteration while externally powered, so the timer naturally counts
a fresh AUTO_OFF_MILLIS window from the moment power is removed —
no instantaneous-blank-on-unplug.
Applied to all three companion_radio UI flavours (ui-new, ui-tiny,
ui-orig). Boards without an isExternalPowered() override use the
base-class default in MeshCore.h (returns false), so battery-powered
behaviour is unchanged everywhere.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com >
2026-05-29 11:25:48 +01:00
e5dab6b999
Rename bootComplete() to onBootComplete() for naming consistency
...
Matches the existing event-style lifecycle hooks on MainBoard
(onBeforeTransmit, onAfterTransmit) per @liamcottle's review feedback.
2026-05-25 09:50:28 -04:00
39a69b86c3
Add MainBoard::bootComplete() hook for boot-indicator LED feedback
...
Framework for upcoming variant-specific PRs that add LED feedback during boot. The hook gives users visual cues that the device is busy and
shouldn't be interacted with until startup completes.
2026-05-25 09:04:47 -04:00
26d0001301
Merge pull request #2608 from recrof/flood-advert-interval-47
...
Set flood advert interval to 47h for new installs
2026-05-23 15:37:31 +10:00
a37078f6c5
Companion repeat: update to more usable default EU frequency
...
869.495 is in 869.4 to 869.65 range which does have 10% duty cycle and 500mW ERP.
2026-05-22 17:04:19 +02:00
da7663a6fb
Fixed hasPendingWork for BLE companions
2026-05-22 10:58:21 +07:00
280213d41f
Fixed to put hasPendingWork out of ENV_INCLUDE_GPS
2026-05-22 10:58:21 +07:00
6b1099161c
Added Power Saving for NRF52 companions
2026-05-22 10:58:17 +07:00
01500e55d8
Change room server flood advert interval to 47 hours
2026-05-21 14:53:49 +02:00
40180b8fe6
Update repeater flood advert interval to 47 hours
2026-05-21 14:50:58 +02:00
26c641bc63
tiny ui rendering fixes
2026-05-21 19:58:10 +10:00
9f683975c1
add torch
2026-05-21 19:58:10 +10:00
8540c98947
add tinyui for lilygo t-echo card
2026-05-21 19:58:10 +10:00
6325a85336
Merge pull request #2493 from Rococo88/complex-wifi-reconnect
...
Refactor WiFi auto-reconnect to use non-blocking polling
2026-05-15 21:21:16 +12:00
c588540b1b
* new CMD_SEND_RAW_PACKET
2026-05-13 13:28:56 +10:00
56d4671c2c
Merge pull request #2490 from tuzzmaniandevil/dev
...
Enhance KissModem frame processing and timeout handling
2026-05-08 23:23:14 +12:00
841db56595
add build flag to configure allowed repeat freq range
2026-05-08 20:16:45 +12:00
ffa76016ff
Address two comments from PR
2026-05-08 11:14:22 +12:00
a0cc3bab4b
Refactor WiFi auto-reconnect to use non-blocking polling
2026-05-07 12:24:06 +02:00
6979326340
* CMD_SET_FLOOD_SCOPE_KEY, now with second variant for explicitly sending un-scoped
...
* FIRMWARE_VER_CODE bumped to 12
2026-05-07 16:51:03 +10:00
314d777b42
Enhance KissModem frame processing and timeout handling
2026-05-07 00:03:09 +00:00
e727fd543b
Merge pull request #2462 from meshcore-dev/target-dup-cleanup
...
Refactor: removed duplicated target code
2026-05-02 17:21:51 +12:00
5a509752a7
don't play startup tune if buzzer pref disabled
2026-05-02 01:47:35 +12:00
0a8a0a4904
* Refactor: removed duplicated radio_rng_seed(), radio_set_params(), radio_set_tx_power()
2026-05-01 14:47:07 +10:00
ffbf73dc5c
Merge pull request #2432 from recrof/kiss-radio-everywhere
...
kiss radio: added stm32 support + envs in platformio.ini
2026-05-01 00:36:46 +12:00
c5bf23f4b1
bump simple_sensor version to v1.15.0
2026-04-30 11:12:31 +02:00
2522492cd7
Merge pull request #2436 from chrisdavis2110/rak3401-comp-ana-button
...
feat: Add support for PIN_USER_BTN_ANA on rak3401 companion usb and companion ble envs
2026-04-30 16:57:00 +12:00
0265851621
added PIN_USER_BTN_ANA for rak3401 companion usb and companion ble
2026-04-28 21:26:56 -07:00
5beef490a0
add kiss radio env to most of the variants
2026-04-28 15:09:25 +02:00
e111f71064
added website to sensor splash screen
2026-04-28 20:40:13 +12:00
3cd40902b3
added website to room server splash screen
2026-04-28 20:39:07 +12:00
5f75b90ff9
added website to companion splash screen
2026-04-28 20:37:17 +12:00
c8d81bc04c
added website to repeater splash screen
2026-04-28 17:02:20 +12:00
3751785400
* version 1.15.0
2026-04-19 11:27:55 +10:00
d7a3d41843
Merge branch 'default-scope' into dev
2026-04-17 16:30:19 +10:00
77d02e844f
* bug fix
2026-04-17 14:38:03 +10:00
df1e12de3e
* Repeater, room server: rule change for sendFloodReply()
2026-04-16 13:22:39 +10:00
d2fdd6fad4
* companion: FIRMWARE_VER_CODE now bumped to 11
2026-04-15 20:47:17 +10:00
4131a455a2
* repeater: refactored 'region' CLI commands -> CommonCLI
...
* room server: added RegionMap, and new CommonCLI wiring, default_scope handling
* sensor: only minimal RegionMap wiring. Still needs work to handle default-scope
2026-04-15 13:32:49 +10:00
569cfe177a
* repeater: default-scope support
2026-04-14 17:51:34 +10:00
efdd2b6a6c
* companion: simplified the CMD_GET / CMD_SET _DEFAULT_FLOOD_SCOPE
2026-04-13 23:11:21 +10:00
d131e8ae35
* companion: RegionMap now used in Datastore
...
* companion: new CMD_SET_DEFAULT_FLOOD_SCOPE
* support for regional builds with DEFAULT_REGION_SCOPE
2026-04-13 21:06:53 +10:00
3b32f35288
* Companion: default scope
2026-04-10 17:01:41 +10:00
0a13ac7fc7
Default button polarity to active-LOW across all firmware types
...
Nearly all LoRa boards use a boot button that pulls to ground when
pressed.
2026-04-04 13:19:13 +02:00
08de3fb01f
Make sendNodeDiscoverReq() public for post-boot discovery
2026-03-30 22:35:05 +03:00
Scott Powell