On a RAK19007 the RAK12501's supply is 3V3_S, switched by WB_IO2, so
gps off, periodic mode and shutdown left it powered. Pass WB_IO2 to the
NMEA driver as peripheralPower under GPS_RAIL_POWER_CONTROL, set by the
new RAK_4631_repeater_gps_power env. It is opt-in because the rail feeds
every slot module, and refused with ETHERNET_ENABLED (RAK13800).
The RAK12500 (I2C) driver keeps switching its own power pin, so this
only applies on the NMEA path.
RefCountedDigitalPin now sets OUTPUT on claim and release: WB_IO2 left
as an input (as probeRak12500() leaves it after a failed probe) keeps
3V3_S in its last state, so writing the latch alone did not cut it.
Measured with a KM003C, battery and panel out: gps off 40.5 -> 12.4 mA,
shutdown 29.7 -> 1.30 mA.
Enable GPS time synchronization across all variants by passing
&rtc_clock to MicroNMEALocationProvider. When GPS gets a valid
fix, the RTC clock is now updated automatically every 30 minutes.
Updated 16 variants: rak4631, lilygo_tbeam_SX1262, rak_wismesh_tag,
lilygo_tbeam_supreme_SX1262, thinknode_m3, heltec_v4, thinknode_m1,
lilygo_tbeam_SX1276, meshadventurer, nano_g2_ultra, heltec_v3,
promicro, xiao_c3, heltec_tracker_v2, keepteen_lt1, heltec_mesh_solar.
Changes to migrate sensor code to the ESM.
Added a separate GPS init sequence for the RAK that scans I2C and Serial1 on the various sockets of the various base boards to find the RAK12500. (and soon the RAK12501)
Removed the GPS specific envs from platformio.ini and enabled GPS for all envs.
Verified working with RAK12500 on RAK19007 sockets A and D, as well as RAK19003.
- Added the BME680 environment sensor functionality
- Added the GPS Repeater env for those wanting it
- Cleaned up the GPS and other RAK4631SensorManager code
Verified build and functionality on normal and GPS repeater and companion envs.
IAQ readout is still a work in progress, but a placeholder can be seen on Channel 2 of the app telemetry.
Added RAK12500 GPS support
Added socket scan capability to determine which socket the GPS is connected to
T-beam supreme: added conditional to displaying location data to only when gps is active
* BasChatMesh: new onContactRequest(), for PAYLOAD_TYPE_REQ handling.
* companion, repeater and room_server: now with basic 'plumbing' to handle REQ_TYPE_GET_TELEMETRY_DATA (0x03).
* dependency: added CayenneLPP to libdeps
* all target.* modules now with a stub 'sensors' object.