Commit Graph
3680 Commits
Author SHA1 Message Date
Olexandr Tyshchenko eea64ffb74 GPS guard: drop time force, it goes to a separate PR 2026-11-09 22:30:24 +02:00
Olexandr Tyshchenko 181041ac64 GpsGuard: do not show a stale time ok without a current trusted fix 2026-11-09 22:15:45 +02:00
Olexandr Tyshchenko d644f0a516 GPS: optional anti-spoofing guard for position and time (GPS_GUARD)
A spoofed GPS signal can move a fixed node anywhere and set its clock to
any time; the clock only moves forward, so a time pushed into the future
breaks timestamps and replay protection until fixed by hand.

With GPS_GUARD, MicroNMEALocationProvider asks a GpsGuard before a fix is
stored as the last fix (satellites, HDOP, optional region box, fence
around the configured position, jump speed, N stable fixes) and before
GPS time is written to the clock (trusted fix current, not before the
build date, small steps once the clock is valid, drift-sized after the
first sync). Without a trusted fix no live position is reported.

CLI in CommonGpsPrefs: 'gps guard', 'gps guard accept', 'gps fence',
'gps ref'; CommonCLI keeps the reference on set lat/lon and gps setloc,
resets the time anchor on manual clock sets and adds 'time force'.

Ported from #3736 onto the GpsDriver/LocationProvider refactor.
2026-11-09 20:43:09 +02:00
Martin Boissonneault 666949fae4 rak4631: let the serial GPS switch the WB_IO2 rail (opt-in)
On a RAK19007 the RAK12501's supply is 3V3_S, switched by WB_IO2, so
gps off, periodic mode and shutdown left it powered. Pass WB_IO2 to the
NMEA driver as peripheralPower under GPS_RAIL_POWER_CONTROL, set by the
new RAK_4631_repeater_gps_power env. It is opt-in because the rail feeds
every slot module, and refused with ETHERNET_ENABLED (RAK13800).

The RAK12500 (I2C) driver keeps switching its own power pin, so this
only applies on the NMEA path.

RefCountedDigitalPin now sets OUTPUT on claim and release: WB_IO2 left
as an input (as probeRak12500() leaves it after a failed probe) keeps
3V3_S in its last state, so writing the latch alone did not cut it.

Measured with a KM003C, battery and panel out: gps off 40.5 -> 12.4 mA,
shutdown 29.7 -> 1.30 mA.
2026-11-08 08:47:35 -04:00
Florent 6eea5e7185 ui_task: let user choose if enter in gps screen toggles or triggers gps 2026-11-08 08:47:35 -04:00
Florent 6c9600e1e7 gps: Rework the CLI
- more consistency with other cli commands
- new format for gps fix
- gps format accepts postfix (s/m/d/h)
- documentation
2026-11-08 08:47:35 -04:00
Florent c06def2f41 gps: once command 2026-11-08 08:47:35 -04:00
Florent 38fa18efb7 gps: move detection into LocationProvider, remove the legacy constructor 2026-11-08 08:47:34 -04:00
Florent 839bb165fc gps: guard the clock sync against stalled and too old fixes 2026-11-08 08:47:34 -04:00
Florent d71a418748 gps: serial pin and configuration fixes (nrf52, meshadventurer, tracker_v1, heltec_tracker) 2026-11-08 08:47:34 -04:00
Níckolas Goline 22ce208e68 muzi_base: fix GPS UART pins and re-enable ATGM336H NMEA output
The refactor no longer calls Serial1.setPins() on nRF52, so Serial1 uses
PIN_SERIAL1_RX/TX directly. Those were swapped (the GPS transmits on
P0.20), so no data was received. Fix them and define PIN_GPS_TX/RX by the
gps module's side, as other variants do.

The ATGM336H keeps its NMEA output config across power cycles, and other
firmware may leave every sentence disabled. Re-enable GGA + RMC after each
power-up.
2026-11-08 08:47:34 -04:00
Florent d49621c805 gps: fix_stats command 2026-11-08 08:47:34 -04:00
Florent 3fd36e7ac6 gps: adapt ui-new and the sensor managers 2026-11-08 08:47:34 -04:00
Florent fa7ca3f418 rak_gps: simplify the rak driver, which now only handles i2c, for nmea use nmea driver directly 2026-11-08 08:47:34 -04:00
Florent 4ac1ed1d9e gps: periodic acquisition rules (timeout, sats and settle time), isEnabled renamed isActive 2026-11-08 08:47:34 -04:00
Florent 36b53d8de9 gps: cache the last fix in LocationProvider (isValid vs hasValidFix), fix and status commands 2026-11-08 08:47:34 -04:00
Florent fe6a47d0c9 gps: move the gps CLI to GpsPrefs and convert all targets 2026-11-08 08:47:34 -04:00
Florent df5a768c5d gps: add GpsDriver, handle the hardware and software switches in the drivers 2026-11-08 08:47:34 -04:00
ripplebiz 5533c24fde Merge pull request #3715 from Amoulier/fix/radiolib-rx-error-counter
Initialize the RadioLib receive error counter
2026-11-01 13:19:47 +11:00
ripplebiz e8202db662 Merge pull request #3739 from A13xB0/fix/rx-header-no-crc
Drop received packets whose LoRa header says no CRC in RadioLib override
2026-10-31 12:29:10 +11:00
R0ck c79500e6ad radiolib: drop received packets whose LoRa header says no CRC. 2026-10-30 14:05:25 +00:00
ripplebiz 61eb1950cd Merge pull request #3728 from AlexandrTyshchenko/fix/sensor-list-overflow
Fix possible reply buffer overflow in 'sensor list'
2026-10-30 13:36:22 +11:00
Liam Cottle 77d81d1f82 Merge pull request #3603 from A13xB0/companion-buzzer-cli
Add CLI command to toggle the buzzer for companions
2026-10-30 12:53:18 +13:00
Olexandr Tyshchenko 017db61cae Fix possible reply buffer overflow in 'sensor list'
'sensor list' appended 'name=value' lines into the 160-byte CLI reply with
unbounded sprintf, only checking the position before each write (< 134).
A single long value (or several medium ones) could write past the end of
the buffer.

Write each entry with snprintf against the remaining space, keep room for
the '... next:N' paging hint, and move entries that do not fit to the next
page. Also guard against NULL names/values from a sensor manager.
2026-10-29 23:49:49 +02:00
fdlamotte 04d72b1049 Merge pull request #3687 from fdlamotte/display_prefs
ui: add some parameters to the cli (mostly regarding eink behaviour)
2026-10-29 08:35:36 -04:00
Florent 5d7100ae7d ui: add some parameters to the cli (mostly regarding eink behaviour) 2026-10-29 08:34:41 -04:00
ripplebiz cf286687d2 Merge pull request #3682 from meshcore-dev/fix-scope-zero
scope 0 rule fixes
2026-10-29 12:17:09 +11:00
Amoulier f688d99baf Initialize the RadioLib receive error counter 2026-10-28 18:56:16 -04:00
ripplebiz 42ded8da64 Merge pull request #3688 from Blake-Latchford/fix/stats-dup-count-wrap
Saturate duplicate packet stats instead of wrapping
2026-10-28 17:06:21 +11:00
ripplebiz 02c827b27d Merge pull request #3686 from marcelverdult/upstream-pr/esp32-rtc-backup-once
Define the RTC backup of ESP32RTCClock once instead of per translation unit
2026-10-28 14:38:36 +11:00
ripplebiz 93ddc86db6 Merge pull request #3692 from Seeed-Studio/dev
Fix LR2021 hot frequency change over BLE
2026-10-28 12:48:39 +11:00
fdlamotte 6fd8e2f4bb Merge pull request #3703 from fdlamotte/remove_button_state_changed
Remove unused buttonStateChanged from some variants
2026-10-27 16:03:02 -04:00
Florent cedb8050a5 Remove unused buttonStateChanged from some variants 2026-10-27 15:52:36 -04:00
fdlamotte f869e565d0 Merge pull request #3702 from akalinin-softvelum/fix/techo-eink-driver
T-Echo: use GxEPD2_154_D67 e-ink driver
2026-10-27 14:56:21 -04:00
akalinin-softvelum 492814bbef T-Echo: use GxEPD2_154_D67 e-ink driver
T-Echo used the fallback GxEPD2_150_BN; on my unit every refresh hit the
10 s busy timeout. Switch to GxEPD2_154_D67 like Meshtastic.
2026-10-27 18:20:36 +00:00
fdlamotte afa4b87c6c Merge pull request #3509 from marcelverdult/fix/thinknode-m8-sensors
Fix ThinkNode M8 repeater/room server build: compile sensor helpers for all envs
2026-10-27 09:31:51 -04:00
Liam Cottle fd56b1a36c Merge pull request #3615 from radek-sixi/fix/common-radio-prefs-signed-tx-power
Fix unsigned conversion of negative TX power in CommonRadioPrefs
2026-10-27 22:44:04 +13:00
Liam Cottle b594cfdace Merge pull request #3693 from recrof/patch-4
bump RadioLib to 7.8.1
2026-10-27 21:58:19 +13:00
Rastislav Vysoky 63bc8ed2bf bump RadioLib to 7.8.1 2026-10-27 09:56:20 +01:00
rado 3e4f71d9a2 Drop unit tests per review feedback 2026-10-27 07:21:24 +01:00
WayenWeng b0bacf8a04 fix(radio): put LR2021 in standby before re-config in setParams 2026-10-27 10:44:36 +08:00
ripplebiz d694bd39c7 Merge pull request #3639 from radek-sixi/fix/skip-empty-anon-contact-slots
Skip empty anon contact slots in peer/contact lookups (prevent null-key ECDH sink)
2026-10-27 11:29:10 +11:00
Marcel Verdult e197e557c3 fix(esp32): define the RTC backup of ESP32RTCClock once
ESP32Board.h defined _rtc_backup_time and _rtc_backup_magic as static in the
header, so every translation unit that includes it has its own copy, and the
inline members of ESP32RTCClock read and write the copy of the unit they are
compiled in. Today one unit per image uses them; a second one could restore a
copy that setCurrentTime() never wrote. The header now declares them, and
ESP32Board.cpp defines them once.
2026-10-26 16:11:12 +01:00
Scott Powell 55b961e36f * unit test fix 2026-10-26 20:39:46 +11:00
Scott Powell bd882a2aa2 * scope 0 rule fixes 2026-10-26 20:29:39 +11:00
Blake LatchfordandClaude Opus 5.5 26e438904e Saturate duplicate packet stats instead of wrapping
Tested on a Heltec V4 repeater with the counter seeded at 65530.

Fixes #3255

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 21:45:10 -04:00
ripplebiz 46216b2d0d Merge pull request #3617 from aXistem-dev/feat/tz-offset-quarter-hours
Show quarter-hour timezone offsets with two decimals
2026-10-26 12:27:10 +11:00
ripplebiz 55abbe72b2 Merge pull request #3667 from Blake-Latchford/fix/kiss-modem-usbcdc-tx-buffer
Fix broken KISS modem build on 6 ESP32-S3 platforms
2026-10-26 12:02:57 +11:00
ripplebiz 36eb5ebad2 Merge pull request #3680 from fdlamotte/m5_wifi_usb_companion
ThinknodeM5: enable wifi in usb companion
2026-10-26 11:18:10 +11:00
Florent 2cad4eecb4 ThinknodeM5: enable wifi in usb companion 2026-10-25 17:49:16 -04:00