Scott Powell
e2571accbe
* ver 1.13.0
2026-02-15 17:24:37 +11:00
Wessel Nieboer
d0720c63c2
Allow negative tx power
...
Like SX1262 allows -9 dBm lowest, some allow lower but that probably
isn't useful
2026-02-06 02:24:51 +01:00
Scott Powell
465776d667
* ver 1.12.0
2026-01-29 21:12:31 +11:00
liamcottle
d13bc446de
added build flag to enable/disable boot advert
2026-01-26 22:39:39 +13:00
liamcottle
ed589f9620
boot adverts are now zero hop instead of flood
2026-01-26 22:20:36 +13:00
ripplebiz
153bcdc6a3
Merge pull request #1457 from oltaco/remote-set-prvkey
...
Allow set prv.key over LoRa, clear ACL and validate key
2026-01-25 14:46:41 +11:00
taco
96ef5e5efe
allow set prv.key from remote, validate new prv.key
2026-01-25 01:32:48 +11:00
taco
988287bfd7
recalc ClientACL shared_secrets at startup
2026-01-25 01:32:44 +11:00
taco
6336bd5b72
refactor ClientACL and CommonCLI, add ClientACL::clear()
2026-01-25 01:31:53 +11:00
taco
9dd52bd0cc
build fix for room server with MESH_DEBUG=1
2026-01-23 23:43:05 +11:00
Scott Powell
e054597a18
* ver 1.11.0
2025-11-30 18:32:10 +11:00
ripplebiz
79a036f995
Merge pull request #1131 from wel97459/dev-uint
...
Changed uint used in flags to uint8_t
2025-11-25 21:51:36 +11:00
Scott Powell
30ccc1fa01
* BUG FIX: remote login fix same as repeater
2025-11-25 15:12:48 +11:00
taco
e13c064487
add board.setAdcMultiplier to room server and sensor
2025-11-21 21:46:55 +11:00
Winston Lowe
031fa1e704
Changed uint to a uint8_t
2025-11-20 21:58:42 -08:00
Scott Powell
91e9fcea4b
* ver 1.10.0
2025-11-13 20:45:38 +11:00
ripplebiz
ba6b8535c9
Merge pull request #971 from fdlamotte/remove_set_setting_by_key
...
SensorManager: remove setSettingByKey
2025-11-11 23:40:13 +11:00
Florent
90e26129ee
Merge branch 'dev' into remove_set_setting_by_key
2025-11-11 12:23:12 +01:00
Scott Powell
ab0721d6df
* fix: repeater and room server telemetry requests now return all telemetry for _READ & _WRITE ACL permissions.
2025-11-09 16:36:23 +11:00
Scott Powell
96e786fa9e
* FIX: for divide by zero crash
2025-10-30 19:11:04 +11:00
Scott Powell
3d9378d91e
* Fix for VolatileRTCClock wrapping around to initial synced time every 49 days
2025-10-30 16:45:50 +11:00
Scott Powell
80f0405600
* direct.txdelay default now 0.2 (was zero)
2025-10-30 00:03:10 +11:00
Scott Powell
8cbcd2271d
* experimental: retransmit delay, removing the 6 'slots'
2025-10-29 23:35:46 +11:00
Michael Hart
81ab944682
Adds serial commands to get stats
...
- Added formatStatsReply, formatRadioStatsReply, and formatPacketStatsReply methods in MyMesh for both simple_repeater, simple_room_server, and simple_sensor.
- Updated CommonCLI to handle new stats commands.
2025-10-28 23:55:49 -07:00
liamcottle
273a54f104
increase room server max uptime from 49 days to 136 years
2025-10-23 23:29:08 +13:00
Florent
37dc715a8e
SensorManager: remove setSettingByKey
2025-10-18 23:37:58 +02:00
Florent
3210475f35
CommonCli: Remove dependency on target.h
2025-10-18 12:33:43 +02:00
Scott Powell
c6b4a58449
* repeater and room server: enable downgrading permissions on guest login
2025-10-14 12:31:43 +11:00
Scott Powell
93c0180740
* Refactor: advert_loc_policy now applied in new method CommonCLI::buildAdvertData()
2025-10-12 12:49:26 +11:00
Scott Powell
837e7dcbdb
* Advert type fix
...
* GPS pref defaults tidy
2025-10-12 12:33:20 +11:00
Florent
bf1da43d7d
gps_cli: gps advert to control advert location policy
2025-10-11 19:00:02 +02:00
Florent de Lamotte
9e3c2fc9d9
gps_cli: gps also restored on sensors and rooms
2025-10-06 15:30:18 +02:00
Scott Powell
8d8b9a6141
* ver 1.9.1
2025-10-02 12:52:19 +10:00
Scott Powell
b92d9bd972
* ver 1.9.0
2025-09-28 19:24:00 +10:00
Scott Powell
95e533d60b
* repeater & room server fix for blank guest password
2025-09-27 01:56:27 +10:00
Scott Powell
a5af1b5bcd
* companion: disabled processing/sending of keep_alive packets (deprecated)
...
* FIRMWARE_VER_LEVEL now moved to end of response payloads
2025-09-25 09:39:11 +10:00
Scott Powell
c21596341a
* Login response payload: now includes FIRMWARE_VER_LEVEL
2025-09-25 09:07:59 +10:00
Scott Powell
5ccacb2a91
* bug fix
2025-09-14 21:51:32 +10:00
Scott Powell
ce08db6238
* room server: ClientACL added
2025-09-14 21:22:12 +10:00
Scott Powell
3666cd72e5
* room refactor: extracted MyMesh class
2025-09-09 20:52:19 +10:00
Quency-D
c9671d7d8d
add heltec meshpocket board.
2025-09-02 13:56:24 +08:00
Scott Powell
637891b814
* ver bump
2025-09-01 19:32:15 +10:00
Scott Powell
ee194a7b19
* added CommonCLI::saveIdentity()
2025-09-01 15:22:11 +10:00
Scott Powell
8b3c16c497
* ver bump
2025-08-31 23:42:15 +10:00
recrof
5dc930410c
set default flood advert interval to 12 hours
2025-08-20 13:44:41 +02:00
Scott Powell
28af68c187
* new CommonCLI commands: "get prv.key", "set prv.key {hex}"
2025-08-01 19:28:44 +10:00
Scott Powell
32e8ce4130
* REQ_TYPE_GET_TELEMETRY_DATA, first reserved byte (of 4) is now inverse mask to apply to permissions
2025-07-31 13:45:53 +10:00
Scott Powell
365cb89634
* ver bump to 1.7.4
2025-07-24 20:30:35 +10:00
Scott Powell
ea4aa93594
* CommonCLI: "set radio " now with optional 5th param timeout_mins, for applying temporary radio params for that many mins
...
* "advert" command now with longer delay, so that CLI reply is sent first
2025-07-23 21:40:37 +10:00
Scott Powell
6bc8dd28d4
* CommonCLI: new "multi.acks" config setting
2025-07-16 18:51:18 +10:00
