* ver bump to 1.4.1

* companion: "node_prefs" -> "new_prefs" migration

arch/esp32/AsyncElegantOTA/LICENSE

@@ -0,0 +1,21 @@
+MIT License
+
+Copyright (c) 2019 Ayush Sharma
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.

arch/esp32/AsyncElegantOTA/keywords.txt

@@ -0,0 +1,2 @@
+AsyncElegantOTA	KEYWORD1
+begin	KEYWORD2

arch/esp32/AsyncElegantOTA/library.properties

@@ -0,0 +1,9 @@
+name=AsyncElegantOTA
+version=2.2.8
+author=Ayush Sharma
+category=Communication
+maintainer=Ayush Sharma <asrocks5@gmail.com>
+sentence=Perform OTAs for ESP8266 & ESP32 Asynchronously.
+paragraph=A User Interface Library which provides interactive elements for your Over the Air Updates on ESP8266/ESP32.
+url=https://github.com/ayushsharma82/AsyncElegantOTA
+architectures=esp8266,esp32

arch/esp32/AsyncElegantOTA/src/AsyncElegantOTA.cpp

@@ -0,0 +1,129 @@
+#include <AsyncElegantOTA.h>
+
+AsyncElegantOtaClass AsyncElegantOTA;
+
+void AsyncElegantOtaClass::setID(const char* id){
+    _id = id;
+}
+
+void AsyncElegantOtaClass::begin(AsyncWebServer *server, const char* username, const char* password){
+    _server = server;
+
+    if(strlen(username) > 0){
+        _authRequired = true;
+        _username = username;
+        _password = password;
+    }else{
+        _authRequired = false;
+        _username = "";
+        _password = "";
+    }
+
+    _server->on("/update/identity", HTTP_GET, [&](AsyncWebServerRequest *request){
+        if(_authRequired){
+            if(!request->authenticate(_username.c_str(), _password.c_str())){
+                return request->requestAuthentication();
+            }
+        }
+        #if defined(ESP8266)
+            request->send(200, "application/json", "{\"id\": \""+_id+"\", \"hardware\": \"ESP8266\"}");
+        #elif defined(ESP32)
+            request->send(200, "application/json", "{\"id\": \""+_id+"\", \"hardware\": \"ESP32\"}");
+        #endif
+    });
+
+    _server->on("/update", HTTP_GET, [&](AsyncWebServerRequest *request){
+        if(_authRequired){
+            if(!request->authenticate(_username.c_str(), _password.c_str())){
+                return request->requestAuthentication();
+            }
+        }
+        AsyncWebServerResponse *response = request->beginResponse_P(200, "text/html", ELEGANT_HTML, ELEGANT_HTML_SIZE);
+        response->addHeader("Content-Encoding", "gzip");
+        request->send(response);
+    });
+
+    _server->on("/update", HTTP_POST, [&](AsyncWebServerRequest *request) {
+        if(_authRequired){
+            if(!request->authenticate(_username.c_str(), _password.c_str())){
+                return request->requestAuthentication();
+            }
+        }
+        // the request handler is triggered after the upload has finished... 
+        // create the response, add header, and send response
+        AsyncWebServerResponse *response = request->beginResponse((Update.hasError())?500:200, "text/plain", (Update.hasError())?"FAIL":"OK");
+        response->addHeader("Connection", "close");
+        response->addHeader("Access-Control-Allow-Origin", "*");
+        request->send(response);
+        restart();
+    }, [&](AsyncWebServerRequest *request, String filename, size_t index, uint8_t *data, size_t len, bool final) {
+        //Upload handler chunks in data
+        if(_authRequired){
+            if(!request->authenticate(_username.c_str(), _password.c_str())){
+                return request->requestAuthentication();
+            }
+        }
+
+        if (!index) {
+            if(!request->hasParam("MD5", true)) {
+                return request->send(400, "text/plain", "MD5 parameter missing");
+            }
+
+            if(!Update.setMD5(request->getParam("MD5", true)->value().c_str())) {
+                return request->send(400, "text/plain", "MD5 parameter invalid");
+            }
+
+            #if defined(ESP8266)
+                int cmd = (filename == "filesystem") ? U_FS : U_FLASH;
+                Update.runAsync(true);
+                size_t fsSize = ((size_t) &_FS_end - (size_t) &_FS_start);
+                uint32_t maxSketchSpace = (ESP.getFreeSketchSpace() - 0x1000) & 0xFFFFF000;
+                if (!Update.begin((cmd == U_FS)?fsSize:maxSketchSpace, cmd)){ // Start with max available size
+            #elif defined(ESP32)
+                int cmd = (filename == "filesystem") ? U_SPIFFS : U_FLASH;
+                if (!Update.begin(UPDATE_SIZE_UNKNOWN, cmd)) { // Start with max available size
+            #endif
+                Update.printError(Serial);
+                return request->send(400, "text/plain", "OTA could not begin");
+            }
+        }
+
+        // Write chunked data to the free sketch space
+        if(len){
+            if (Update.write(data, len) != len) {
+                return request->send(400, "text/plain", "OTA could not begin");
+            }
+        }
+            
+        if (final) { // if the final flag is set then this is the last frame of data
+            if (!Update.end(true)) { //true to set the size to the current progress
+                Update.printError(Serial);
+                return request->send(400, "text/plain", "Could not end OTA");
+            }
+        }else{
+            return;
+        }
+    });
+}
+
+// deprecated, keeping for backward compatibility
+void AsyncElegantOtaClass::loop() {
+}
+
+void AsyncElegantOtaClass::restart() {
+    yield();
+    delay(1000);
+    yield();
+    ESP.restart();
+}
+
+String AsyncElegantOtaClass::getID(){
+    String id = "";
+    #if defined(ESP8266)
+        id = String(ESP.getChipId());
+    #elif defined(ESP32)
+        id = String((uint32_t)ESP.getEfuseMac(), HEX);
+    #endif
+    id.toUpperCase();
+    return id;
+}

arch/esp32/AsyncElegantOTA/src/AsyncElegantOTA.h

@@ -0,0 +1,52 @@
+#ifndef AsyncElegantOTA_h
+#define AsyncElegantOTA_h
+
+#warning AsyncElegantOTA library is deprecated, Please consider moving to newer ElegantOTA library which now comes with an Async Mode. Learn More: https://docs.elegantota.pro/async-mode/ 
+
+#include "Arduino.h"
+#include "stdlib_noniso.h"
+
+#if defined(ESP8266)
+    #include "ESP8266WiFi.h"
+    #include "ESPAsyncTCP.h"
+    #include "flash_hal.h"
+    #include "FS.h"
+#elif defined(ESP32)
+    #include "WiFi.h"
+    #include "AsyncTCP.h"
+    #include "Update.h"
+    #include "esp_int_wdt.h"
+    #include "esp_task_wdt.h"
+#endif
+
+#include "Hash.h"
+#include "ESPAsyncWebServer.h"
+#include "FS.h"
+
+#include "elegantWebpage.h"
+
+
+class AsyncElegantOtaClass{
+
+    public:
+        void
+            setID(const char* id),
+            begin(AsyncWebServer *server, const char* username = "", const char* password = ""),
+            loop(),
+            restart();
+
+    private:
+        AsyncWebServer *_server;
+
+        String getID();
+
+        String _id = getID();
+        String _username = "";
+        String _password = "";
+        bool _authRequired = false;
+
+};
+
+extern AsyncElegantOtaClass AsyncElegantOTA;
+
+#endif

arch/esp32/AsyncElegantOTA/src/Hash.h

@@ -0,0 +1,38 @@
+/**
+ * @file Hash.h
+ * @date 20.05.2015
+ * @author Markus Sattler
+ *
+ * Copyright (c) 2015 Markus Sattler. All rights reserved.
+ * This file is part of the esp8266 core for Arduino environment.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#ifndef HASH_H_
+#define HASH_H_
+
+//#define DEBUG_SHA1
+
+void sha1(const uint8_t* data, uint32_t size, uint8_t hash[20]);
+void sha1(const char* data, uint32_t size, uint8_t hash[20]);
+void sha1(const String& data, uint8_t hash[20]);
+
+String sha1(const uint8_t* data, uint32_t size);
+String sha1(const char* data, uint32_t size);
+String sha1(const String& data);
+
+#endif /* HASH_H_ */

build.sh

@@ -58,7 +58,7 @@ build_firmware() {
   fi
 
   # build .uf2 for nrf52 boards
-  if [[ $1 == *"RAK_4631"* || $1 == *"t1000e"* || $1 == *"t114"* || $1 == *"T-Echo"* ]]; then
+  if [[ $1 == *"RAK_4631"* || $1 == *"t1000e"* || $1 == *"t114"* || $1 == *"T-Echo"* || $1 == *"Faketec"* || $1 == *"ProMicro"* ]]; then
     python bin/uf2conv/uf2conv.py .pio/build/$1/firmware.hex -c -o .pio/build/$1/firmware.uf2 -f 0xADA52840
   fi
 

examples/companion_radio/main.cpp

@@ -16,6 +16,7 @@
 #include <helpers/IdentityStore.h>
 #include <helpers/BaseSerialInterface.h>
 #include <RTClib.h>
+#include <target.h>
 
 /* ---------------------------------- CONFIGURATION ------------------------------------- */
 
@@ -59,59 +60,6 @@
 
 #define  PUBLIC_GROUP_PSK  "izOH6cXN6mrJ5e26oRXNcg=="
 
-#if defined(HELTEC_LORA_V3)
-  #include <helpers/HeltecV3Board.h>
-  #include <helpers/CustomSX1262Wrapper.h>
-  static HeltecV3Board board;
-#elif defined(HELTEC_LORA_V2)
-  #include <helpers/HeltecV2Board.h>
-  #include <helpers/CustomSX1276Wrapper.h>
-  static HeltecV2Board board;
-#elif defined(ARDUINO_XIAO_ESP32C3)
-  #include <helpers/XiaoC3Board.h>
-  #include <helpers/CustomSX1262Wrapper.h>
-  #include <helpers/CustomSX1268Wrapper.h>
-  static XiaoC3Board board;
-#elif defined(SEEED_XIAO_S3) || defined(LILYGO_T3S3)
-  #include <helpers/ESP32Board.h>
-  #include <helpers/CustomSX1262Wrapper.h>
-  static ESP32Board board;
-#elif defined(LILYGO_TLORA)
-  #include <helpers/LilyGoTLoraBoard.h>
-  #include <helpers/CustomSX1276Wrapper.h>
-  static LilyGoTLoraBoard board;
-#elif defined(RAK_4631)
-  #include <helpers/nrf52/RAK4631Board.h>
-  #include <helpers/CustomSX1262Wrapper.h>
-  static RAK4631Board board;
-#elif defined(T1000_E)
-  #include <helpers/nrf52/T1000eBoard.h>
-  #include <helpers/CustomLR1110Wrapper.h>
-  static T1000eBoard board;
-#elif defined(HELTEC_T114)
-  #include <helpers/nrf52/T114Board.h>
-  #include <helpers/CustomSX1262Wrapper.h>
-  static T114Board board;
-#elif defined(LILYGO_TECHO)
-  #include <helpers/nrf52/TechoBoard.h>
-  #include <helpers/CustomSX1262Wrapper.h>
-  static TechoBoard board;
-
-#elif defined(LILYGO_TBEAM)
-  #include <helpers/TBeamBoard.h>
-  #include <helpers/CustomSX1276Wrapper.h>
-  static TBeamBoard board;
-
-#elif defined(FAKETEC)
-  #include <helpers/nrf52/faketecBoard.h>
-  #include <helpers/CustomSX1262Wrapper.h>
-  #include <helpers/CustomLLCC68Wrapper.h>
-  static faketecBoard board;
-
-#else
-  #error "need to provide a 'board' object"
-#endif
-
 #ifdef DISPLAY_CLASS
   #include "UITask.h"
   #include <helpers/ui/SSD1306Display.h>
@@ -141,11 +89,11 @@ static uint32_t _atoi(const char* sp) {
 #define FIRMWARE_VER_CODE    3
 
 #ifndef FIRMWARE_BUILD_DATE
-  #define FIRMWARE_BUILD_DATE   "19 Mar 2025"
+  #define FIRMWARE_BUILD_DATE   "25 Mar 2025"
 #endif
 
 #ifndef FIRMWARE_VERSION
-  #define FIRMWARE_VERSION   "v1.4.0"
+  #define FIRMWARE_VERSION   "v1.4.1"
 #endif
 
 #define CMD_APP_START              1
@@ -739,7 +687,7 @@ protected:
     memcpy(&out_frame[i], &auth_code, 4); i += 4;
     memcpy(&out_frame[i], path_hashes, path_len); i += path_len;
     memcpy(&out_frame[i], path_snrs, path_len); i += path_len;
-    out_frame[i++] = (int8_t)(_radio->getLastSNR() * 4);   // extra/final SNR (to this node)
+    out_frame[i++] = (int8_t)(packet->getSNR() * 4);   // extra/final SNR (to this node)
 
     if (_serial->isConnected()) {
       _serial->writeFrame(out_frame, i);
@@ -784,6 +732,41 @@ public:
     //_prefs.rx_delay_base = 10.0f;  enable once new algo fixed
   }
 
+  void loadPrefsInt(const char* filename) {
+    File file = _fs->open(filename);
+    if (file) {
+      uint8_t pad[8];
+
+      file.read((uint8_t *) &_prefs.airtime_factor, sizeof(float));  // 0
+      file.read((uint8_t *) _prefs.node_name, sizeof(_prefs.node_name));  // 4
+      file.read(pad, 4);   // 36
+      file.read((uint8_t *) &_prefs.node_lat, sizeof(_prefs.node_lat));  // 40
+      file.read((uint8_t *) &_prefs.node_lon, sizeof(_prefs.node_lon));  // 48
+      file.read((uint8_t *) &_prefs.freq, sizeof(_prefs.freq));   // 56
+      file.read((uint8_t *) &_prefs.sf, sizeof(_prefs.sf));  // 60
+      file.read((uint8_t *) &_prefs.cr, sizeof(_prefs.cr));  // 61
+      file.read((uint8_t *) &_prefs.reserved1, sizeof(_prefs.reserved1));  // 62
+      file.read((uint8_t *) &_prefs.reserved2, sizeof(_prefs.reserved2));  // 63
+      file.read((uint8_t *) &_prefs.bw, sizeof(_prefs.bw));  // 64
+      file.read((uint8_t *) &_prefs.tx_power_dbm, sizeof(_prefs.tx_power_dbm));  // 68
+      file.read((uint8_t *) _prefs.unused, sizeof(_prefs.unused));  // 69
+      file.read((uint8_t *) &_prefs.rx_delay_base, sizeof(_prefs.rx_delay_base));  // 72
+      file.read(pad, 4);   // 76
+      file.read((uint8_t *) &_prefs.ble_pin, sizeof(_prefs.ble_pin));  // 80
+
+      // sanitise bad pref values
+      _prefs.rx_delay_base = constrain(_prefs.rx_delay_base, 0, 20.0f);
+      _prefs.airtime_factor = constrain(_prefs.airtime_factor, 0, 9.0f);
+      _prefs.freq = constrain(_prefs.freq, 400.0f, 2500.0f);
+      _prefs.bw = constrain(_prefs.bw, 62.5f, 500.0f);
+      _prefs.sf = constrain(_prefs.sf, 7, 12);
+      _prefs.cr = constrain(_prefs.cr, 5, 8);
+      _prefs.tx_power_dbm = constrain(_prefs.tx_power_dbm, 1, MAX_LORA_TX_POWER);
+
+      file.close();
+    }
+  }
+
   void begin(FILESYSTEM& fs, mesh::RNG& trng, bool has_display) {
     _fs = &fs;
 
@@ -798,39 +781,12 @@ public:
     loadMainIdentity(trng);
 
     // load persisted prefs
-    if (_fs->exists("/node_prefs")) {
-      File file = _fs->open("/node_prefs");
-      if (file) {
-        uint8_t pad[8];
-
-        file.read((uint8_t *) &_prefs.airtime_factor, sizeof(float));  // 0
-        file.read((uint8_t *) _prefs.node_name, sizeof(_prefs.node_name));  // 4
-        file.read(pad, 4);   // 36
-        file.read((uint8_t *) &_prefs.node_lat, sizeof(_prefs.node_lat));  // 40
-        file.read((uint8_t *) &_prefs.node_lon, sizeof(_prefs.node_lon));  // 48
-        file.read((uint8_t *) &_prefs.freq, sizeof(_prefs.freq));   // 56
-        file.read((uint8_t *) &_prefs.sf, sizeof(_prefs.sf));  // 60
-        file.read((uint8_t *) &_prefs.cr, sizeof(_prefs.cr));  // 61
-        file.read((uint8_t *) &_prefs.reserved1, sizeof(_prefs.reserved1));  // 62
-        file.read((uint8_t *) &_prefs.reserved2, sizeof(_prefs.reserved2));  // 63
-        file.read((uint8_t *) &_prefs.bw, sizeof(_prefs.bw));  // 64
-        file.read((uint8_t *) &_prefs.tx_power_dbm, sizeof(_prefs.tx_power_dbm));  // 68
-        file.read((uint8_t *) _prefs.unused, sizeof(_prefs.unused));  // 69
-        file.read((uint8_t *) &_prefs.rx_delay_base, sizeof(_prefs.rx_delay_base));  // 72
-        file.read(pad, 4);   // 76
-        file.read((uint8_t *) &_prefs.ble_pin, sizeof(_prefs.ble_pin));  // 80
-
-        // sanitise bad pref values
-        _prefs.rx_delay_base = constrain(_prefs.rx_delay_base, 0, 20.0f);
-        _prefs.airtime_factor = constrain(_prefs.airtime_factor, 0, 9.0f);
-        _prefs.freq = constrain(_prefs.freq, 400.0f, 2500.0f);
-        _prefs.bw = constrain(_prefs.bw, 62.5f, 500.0f);
-        _prefs.sf = constrain(_prefs.sf, 7, 12);
-        _prefs.cr = constrain(_prefs.cr, 5, 8);
-        _prefs.tx_power_dbm = constrain(_prefs.tx_power_dbm, 1, MAX_LORA_TX_POWER);
-
-        file.close();
-      }
+    if (_fs->exists("/new_prefs")) {
+      loadPrefsInt("/new_prefs");   // new filename
+    } else if (_fs->exists("/node_prefs")) {
+      loadPrefsInt("/node_prefs");
+      savePrefs();  // save to new filename
+      _fs->remove("/node_prefs");  // remove old
     }
 
   #ifdef BLE_PIN_CODE
@@ -875,10 +831,10 @@ public:
 
   void savePrefs() {
 #if defined(NRF52_PLATFORM)
-    File file = _fs->open("/node_prefs", FILE_O_WRITE);
+    File file = _fs->open("/new_prefs", FILE_O_WRITE);
     if (file) { file.seek(0); file.truncate(); }
 #else
-    File file = _fs->open("/node_prefs", "w", true);
+    File file = _fs->open("/new_prefs", "w", true);
 #endif
     if (file) {
       uint8_t pad[8];
@@ -959,7 +915,7 @@ public:
       memcpy(&msg_timestamp, &cmd_frame[i], 4); i += 4;
       uint8_t* pub_key_prefix = &cmd_frame[i]; i += 6;
       ContactInfo* recipient = lookupContactByPubKey(pub_key_prefix, 6);
-      if (recipient && attempt < 4 && (txt_type == TXT_TYPE_PLAIN || txt_type == TXT_TYPE_CLI_DATA)) {
+      if (recipient && (txt_type == TXT_TYPE_PLAIN || txt_type == TXT_TYPE_CLI_DATA)) {
         char *text = (char *) &cmd_frame[i];
         int tlen = len - i;
         uint32_t est_timeout;
@@ -1473,20 +1429,6 @@ public:
   #error "need to define a serial interface"
 #endif
 
-#if defined(NRF52_PLATFORM)
-RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, SPI);
-#elif defined(LILYGO_TLORA)
-SPIClass spi;
-RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_0, P_LORA_RESET, P_LORA_DIO_1, spi);
-#elif defined(LILYGO_TBEAM)
-SPIClass spi;
-RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_0, P_LORA_RESET, P_LORA_DIO_1, spi);
-#elif defined(P_LORA_SCLK)
-SPIClass spi;
-RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, spi);
-#else
-RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY);
-#endif
 StdRNG fast_rng;
 SimpleMeshTables tables;
 MyMesh the_mesh(radio, *new WRAPPER_CLASS(radio, board), fast_rng, *new VolatileRTCClock(), tables);
@@ -1499,43 +1441,8 @@ void setup() {
   Serial.begin(115200);
 
   board.begin();
-#ifdef SX126X_DIO3_TCXO_VOLTAGE
-  float tcxo = SX126X_DIO3_TCXO_VOLTAGE;
-#else
-  float tcxo = 1.6f;
-#endif
 
-#if defined(NRF52_PLATFORM)
-  SPI.setPins(P_LORA_MISO, P_LORA_SCLK, P_LORA_MOSI);
-  SPI.begin();
-#elif defined(P_LORA_SCLK)
-  spi.begin(P_LORA_SCLK, P_LORA_MISO, P_LORA_MOSI);
-#endif
-  int status = radio.begin(LORA_FREQ, LORA_BW, LORA_SF, LORA_CR, RADIOLIB_SX126X_SYNC_WORD_PRIVATE, LORA_TX_POWER, 8, tcxo);
-#if defined(FAKETEC)
-  if (status == RADIOLIB_ERR_SPI_CMD_FAILED || status == RADIOLIB_ERR_SPI_CMD_INVALID) {
-    #define SX126X_DIO3_TCXO_VOLTAGE (0.0f);
-    tcxo = SX126X_DIO3_TCXO_VOLTAGE;
-    status = radio.begin(LORA_FREQ, LORA_BW, LORA_SF, LORA_CR, RADIOLIB_SX126X_SYNC_WORD_PRIVATE, LORA_TX_POWER, 8, tcxo);
-  }
-#endif
-  if (status != RADIOLIB_ERR_NONE) {
-    Serial.print("ERROR: radio init failed: ");
-    Serial.println(status);
-    halt();
-  }
-
-  radio.setCRC(1);
-
-#ifdef SX126X_CURRENT_LIMIT
-  radio.setCurrentLimit(SX126X_CURRENT_LIMIT);
-#endif
-#ifdef SX126X_DIO2_AS_RF_SWITCH
-  radio.setDio2AsRfSwitch(SX126X_DIO2_AS_RF_SWITCH);
-#endif
-#ifdef SX126X_RX_BOOSTED_GAIN
-  radio.setRxBoostedGainMode(SX126X_RX_BOOSTED_GAIN);
-#endif
+  if (!radio_init()) { halt(); }
 
   fast_rng.begin(radio.random(0x7FFFFFFF));
 

examples/simple_repeater/main.cpp

@@ -18,15 +18,16 @@
 #include <helpers/TxtDataHelpers.h>
 #include <helpers/CommonCLI.h>
 #include <RTClib.h>
+#include <target.h>
 
 /* ------------------------------ Config -------------------------------- */
 
 #ifndef FIRMWARE_BUILD_DATE
-  #define FIRMWARE_BUILD_DATE   "19 Mar 2025"
+  #define FIRMWARE_BUILD_DATE   "25 Mar 2025"
 #endif
 
 #ifndef FIRMWARE_VERSION
-  #define FIRMWARE_VERSION   "v1.4.0"
+  #define FIRMWARE_VERSION   "v1.4.1"
 #endif
 
 #ifndef LORA_FREQ
@@ -59,52 +60,6 @@
   #define  ADMIN_PASSWORD  "password"
 #endif
 
-#if defined(HELTEC_LORA_V3)
-  #include <helpers/HeltecV3Board.h>
-  #include <helpers/CustomSX1262Wrapper.h>
-  static HeltecV3Board board;
-#elif defined(HELTEC_LORA_V2)
-  #include <helpers/HeltecV2Board.h>
-  #include <helpers/CustomSX1276Wrapper.h>
-  static HeltecV2Board board;
-#elif defined(ARDUINO_XIAO_ESP32C3)
-  #include <helpers/XiaoC3Board.h>
-  #include <helpers/CustomSX1262Wrapper.h>
-  #include <helpers/CustomSX1268Wrapper.h>
-  static XiaoC3Board board;
-#elif defined(SEEED_XIAO_S3) || defined(LILYGO_T3S3)
-  #include <helpers/ESP32Board.h>
-  #include <helpers/CustomSX1262Wrapper.h>
-  static ESP32Board board;
-#elif defined(LILYGO_TLORA)
-  #include <helpers/LilyGoTLoraBoard.h>
-  #include <helpers/CustomSX1276Wrapper.h>
-  static LilyGoTLoraBoard board;
-#elif defined(STATION_G2)
-  #include <helpers/StationG2Board.h>
-  #include <helpers/CustomSX1262Wrapper.h>
-  static StationG2Board board;
-#elif defined(RAK_4631)
-  #include <helpers/nrf52/RAK4631Board.h>
-  #include <helpers/CustomSX1262Wrapper.h>
-  static RAK4631Board board;
-#elif defined(HELTEC_T114)
-  #include <helpers/nrf52/T114Board.h>
-  #include <helpers/CustomSX1262Wrapper.h>
-  static T114Board board;
-#elif defined(LILYGO_TECHO)
-  #include <helpers/nrf52/TechoBoard.h>
-  #include <helpers/CustomSX1262Wrapper.h>
-  static TechoBoard board;
-#elif defined(FAKETEC)
-  #include <helpers/nrf52/faketecBoard.h>
-  #include <helpers/CustomSX1262Wrapper.h>
-  #include <helpers/CustomLLCC68Wrapper.h>
-  static faketecBoard board;
-#else
-  #error "need to provide a 'board' object"
-#endif
-
 #ifdef DISPLAY_CLASS
   #include <helpers/ui/SSD1306Display.h>
 
@@ -157,7 +112,7 @@ class MyMesh : public mesh::Mesh, public CommonCLICallbacks {
   FILESYSTEM* _fs;
   RADIO_CLASS* _phy;
   mesh::MainBoard* _board;
-  unsigned long next_local_advert;
+  unsigned long next_local_advert, next_flood_advert;
   bool _logging;
   NodePrefs _prefs;
   CommonCLI _cli;
@@ -525,7 +480,7 @@ public:
   {
     my_radio = &radio;
     memset(known_clients, 0, sizeof(known_clients));
-    next_local_advert = 0;
+    next_local_advert = next_flood_advert = 0;
     _logging = false;
 
     // defaults
@@ -543,6 +498,7 @@ public:
     _prefs.cr = LORA_CR;
     _prefs.tx_power_dbm = LORA_TX_POWER;
     _prefs.advert_interval = 1;  // default to 2 minutes for NEW installs
+    _prefs.flood_advert_interval = 3;   // 3 hours
     _prefs.flood_max = 64;
   }
 
@@ -561,6 +517,7 @@ public:
     _phy->setOutputPower(_prefs.tx_power_dbm);
 
     updateAdvertTimer();
+    updateFloodAdvertTimer();
   }
 
   const char* getFirmwareVer() override { return FIRMWARE_VERSION; }
@@ -593,11 +550,18 @@ public:
 
   void updateAdvertTimer() override {
     if (_prefs.advert_interval > 0) {  // schedule local advert timer
-      next_local_advert = futureMillis((uint32_t)_prefs.advert_interval * 2 * 60 * 1000);
+      next_local_advert = futureMillis( ((uint32_t)_prefs.advert_interval) * 2 * 60 * 1000);
     } else {
       next_local_advert = 0;  // stop the timer
     }
   }
+  void updateFloodAdvertTimer() override {
+    if (_prefs.flood_advert_interval > 0) {  // schedule flood advert timer
+      next_flood_advert = futureMillis( ((uint32_t)_prefs.flood_advert_interval) * 60 * 60 * 1000);
+    } else {
+      next_flood_advert = 0;  // stop the timer
+    }
+  }
 
   void setLoggingOn(bool enable) override { _logging = enable; }
 
@@ -624,11 +588,15 @@ public:
   void loop() {
     mesh::Mesh::loop();
 
-    if (next_local_advert && millisHasNowPassed(next_local_advert)) {
+    if (next_flood_advert && millisHasNowPassed(next_flood_advert)) {
       mesh::Packet* pkt = createSelfAdvert();
-      if (pkt) {
-        sendZeroHop(pkt);
-      }
+      if (pkt) sendFlood(pkt);
+
+      updateFloodAdvertTimer();   // schedule next flood advert
+      updateAdvertTimer();   // also schedule local advert (so they don't overlap)
+    } else if (next_local_advert && millisHasNowPassed(next_local_advert)) {
+      mesh::Packet* pkt = createSelfAdvert();
+      if (pkt) sendZeroHop(pkt);
 
       updateAdvertTimer();   // schedule next local advert
     }
@@ -638,17 +606,6 @@ public:
   }
 };
 
-#if defined(NRF52_PLATFORM)
-RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, SPI);
-#elif defined(LILYGO_TLORA)
-SPIClass spi;
-RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_0, P_LORA_RESET, P_LORA_DIO_1, spi);
-#elif defined(P_LORA_SCLK)
-SPIClass spi;
-RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, spi);
-#else
-RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY);
-#endif
 StdRNG fast_rng;
 SimpleMeshTables tables;
 
@@ -677,44 +634,7 @@ void setup() {
 #endif
   rtc_clock.begin(Wire);
 
-#ifdef SX126X_DIO3_TCXO_VOLTAGE
-  float tcxo = SX126X_DIO3_TCXO_VOLTAGE;
-#else
-  float tcxo = 1.6f;
-#endif
-
-#if defined(NRF52_PLATFORM)
-  SPI.setPins(P_LORA_MISO, P_LORA_SCLK, P_LORA_MOSI);
-  SPI.begin();
-#elif defined(P_LORA_SCLK)
-  spi.begin(P_LORA_SCLK, P_LORA_MISO, P_LORA_MOSI);
-#endif
-  int status = radio.begin(LORA_FREQ, LORA_BW, LORA_SF, LORA_CR, RADIOLIB_SX126X_SYNC_WORD_PRIVATE, LORA_TX_POWER, 8, tcxo);
-#if defined(FAKETEC)
-  if (status == RADIOLIB_ERR_SPI_CMD_FAILED || status == RADIOLIB_ERR_SPI_CMD_INVALID) {
-    #define SX126X_DIO3_TCXO_VOLTAGE (0.0f);
-    tcxo = SX126X_DIO3_TCXO_VOLTAGE;
-    status = radio.begin(LORA_FREQ, LORA_BW, LORA_SF, LORA_CR, RADIOLIB_SX126X_SYNC_WORD_PRIVATE, LORA_TX_POWER, 8, tcxo);
-  }
-#endif
-  if (status != RADIOLIB_ERR_NONE) {
-    delay(5000);
-    Serial.print("ERROR: radio init failed: ");
-    Serial.println(status);
-    halt();
-  }
-
-  radio.setCRC(1);
-
-#ifdef SX126X_CURRENT_LIMIT
-  radio.setCurrentLimit(SX126X_CURRENT_LIMIT);
-#endif
-#ifdef SX126X_DIO2_AS_RF_SWITCH
-  radio.setDio2AsRfSwitch(SX126X_DIO2_AS_RF_SWITCH);
-#endif
-#ifdef SX126X_RX_BOOSTED_GAIN
-  radio.setRxBoostedGainMode(SX126X_RX_BOOSTED_GAIN);
-#endif
+  if (!radio_init()) { halt(); }
 
   fast_rng.begin(radio.random(0x7FFFFFFF));
 
@@ -750,7 +670,7 @@ void setup() {
 #endif
 
   // send out initial Advertisement to the mesh
-  the_mesh.sendSelfAdvertisement(2000);
+  the_mesh.sendSelfAdvertisement(16000);
 }
 
 void loop() {

examples/simple_room_server/main.cpp

@@ -18,15 +18,16 @@
 #include <helpers/TxtDataHelpers.h>
 #include <helpers/CommonCLI.h>
 #include <RTClib.h>
+#include <target.h>
 
 /* ------------------------------ Config -------------------------------- */
 
 #ifndef FIRMWARE_BUILD_DATE
-  #define FIRMWARE_BUILD_DATE   "19 Mar 2025"
+  #define FIRMWARE_BUILD_DATE   "25 Mar 2025"
 #endif
 
 #ifndef FIRMWARE_VERSION
-  #define FIRMWARE_VERSION   "v1.4.0"
+  #define FIRMWARE_VERSION   "v1.4.1"
 #endif
 
 #ifndef LORA_FREQ
@@ -67,52 +68,6 @@
   #define MAX_UNSYNCED_POSTS    16
 #endif
 
-#if defined(HELTEC_LORA_V3)
-  #include <helpers/HeltecV3Board.h>
-  #include <helpers/CustomSX1262Wrapper.h>
-  static HeltecV3Board board;
-#elif defined(HELTEC_LORA_V2)
-  #include <helpers/HeltecV2Board.h>
-  #include <helpers/CustomSX1276Wrapper.h>
-  static HeltecV2Board board;
-#elif defined(ARDUINO_XIAO_ESP32C3)
-  #include <helpers/XiaoC3Board.h>
-  #include <helpers/CustomSX1262Wrapper.h>
-  #include <helpers/CustomSX1268Wrapper.h>
-  static XiaoC3Board board;
-#elif defined(SEEED_XIAO_S3) || defined(LILYGO_T3S3)
-  #include <helpers/ESP32Board.h>
-  #include <helpers/CustomSX1262Wrapper.h>
-  static ESP32Board board;
-#elif defined(LILYGO_TLORA)
-  #include <helpers/LilyGoTLoraBoard.h>
-  #include <helpers/CustomSX1276Wrapper.h>
-  static LilyGoTLoraBoard board;
-#elif defined(STATION_G2)
-  #include <helpers/StationG2Board.h>
-  #include <helpers/CustomSX1262Wrapper.h>
-  static StationG2Board board;
-#elif defined(RAK_4631)
-  #include <helpers/nrf52/RAK4631Board.h>
-  #include <helpers/CustomSX1262Wrapper.h>
-  static RAK4631Board board;
-#elif defined(HELTEC_T114)
-  #include <helpers/nrf52/T114Board.h>
-  #include <helpers/CustomSX1262Wrapper.h>
-  static T114Board board;
-#elif defined(LILYGO_TECHO)
-  #include <helpers/nrf52/TechoBoard.h>
-  #include <helpers/CustomSX1262Wrapper.h>
-  static TechoBoard board;
-#elif defined(FAKETEC)
-  #include <helpers/nrf52/faketecBoard.h>
-  #include <helpers/CustomSX1262Wrapper.h>
-  #include <helpers/CustomLLCC68Wrapper.h>
-  static faketecBoard board;
-#else
-  #error "need to provide a 'board' object"
-#endif
-
 #ifdef DISPLAY_CLASS
   #include <helpers/ui/SSD1306Display.h>
 
@@ -124,6 +79,12 @@
 
 /* ------------------------------ Code -------------------------------- */
 
+enum RoomPermission {
+  ADMIN,
+  GUEST,
+  READ_ONLY
+};
+
 struct ClientInfo {
   mesh::Identity id;
   uint32_t last_timestamp;  // by THEIR clock
@@ -132,7 +93,7 @@ struct ClientInfo {
   uint32_t pending_ack;
   uint32_t push_post_timestamp;
   unsigned long ack_timeout;
-  bool     is_admin;
+  RoomPermission  permission;
   uint8_t  push_failures;
   uint8_t  secret[PUB_KEY_SIZE];
   int      out_path_len;
@@ -184,7 +145,7 @@ class MyMesh : public mesh::Mesh, public CommonCLICallbacks {
   FILESYSTEM* _fs;
   RADIO_CLASS* _phy;
   mesh::MainBoard* _board;
-  unsigned long next_local_advert;
+  unsigned long next_local_advert, next_flood_advert;
   NodePrefs _prefs;
   CommonCLI _cli;
   uint8_t reply_data[MAX_PACKET_PAYLOAD];
@@ -344,13 +305,16 @@ protected:
       memcpy(&sender_timestamp, data, 4);
       memcpy(&sender_sync_since, &data[4], 4);  // sender's "sync messags SINCE x" timestamp
 
-      bool is_admin;
+      RoomPermission perm;
       data[len] = 0;  // ensure null terminator
       if (strcmp((char *) &data[8], _prefs.password) == 0) {  // check for valid admin password
-        is_admin = true;
+        perm = RoomPermission::ADMIN;
       } else {
-        is_admin = false;
-        if (strcmp((char *) &data[8], _prefs.guest_password) != 0) {  // check the room/public password
+        if (strcmp((char *) &data[8], _prefs.guest_password) == 0) {  // check the room/public password
+          perm = RoomPermission::GUEST;
+        } else if (_prefs.allow_read_only) {
+          perm = RoomPermission::READ_ONLY;
+        } else {
           MESH_DEBUG_PRINTLN("Incorrect room password");
           return;   // no response. Client will timeout
         }
@@ -363,7 +327,7 @@ protected:
       }
 
       MESH_DEBUG_PRINTLN("Login success!");
-      client->is_admin = is_admin;
+      client->permission = perm;
       client->last_timestamp = sender_timestamp;
       client->sync_since = sender_sync_since;
       client->pending_ack = 0;
@@ -377,7 +341,7 @@ protected:
       // TODO: maybe reply with count of messages waiting to be synced for THIS client?
       reply_data[4] = RESP_SERVER_LOGIN_OK;
       reply_data[5] = (CLIENT_KEEP_ALIVE_SECS >> 4);  // NEW: recommended keep-alive interval (secs / 16)
-      reply_data[6] = is_admin ? 1 : 0;
+      reply_data[6] = (perm == RoomPermission::ADMIN ? 1 : (perm == RoomPermission::GUEST ? 0 : 2));
       reply_data[7] = 0;  // FUTURE: reserved
       memcpy(&reply_data[8], "OK", 2);  // REVISIT: not really needed
 
@@ -454,7 +418,7 @@ protected:
         uint8_t temp[166];
         bool send_ack;
         if (flags == TXT_TYPE_CLI_DATA) {
-          if (client->is_admin) {
+          if (client->permission == RoomPermission::ADMIN) {
             if (is_retry) {
               temp[5] = 0;  // no reply
             } else {
@@ -467,11 +431,16 @@ protected:
             send_ack = false;  // and no ACK...  user shoudn't be sending these
           }
         } else {   // TXT_TYPE_PLAIN
-          if (!is_retry) {
-            addPost(client, (const char *) &data[5]);
+          if (client->permission == RoomPermission::READ_ONLY) {
+            temp[5] = 0;  // no reply
+            send_ack = false;  // no ACK
+          } else {
+            if (!is_retry) {
+              addPost(client, (const char *) &data[5]);
+            }
+            temp[5] = 0;  // no reply (ACK is enough)
+            send_ack = true;
           }
-          temp[5] = 0;  // no reply (ACK is enough)
-          send_ack = true;
         }
 
         uint32_t delay_millis;
@@ -629,7 +598,7 @@ public:
         _phy(&phy), _board(&board), _cli(board, this, &_prefs, this)
   {
     my_radio = &radio;
-    next_local_advert = 0;
+    next_local_advert = next_flood_advert = 0;
 
     // defaults
     memset(&_prefs, 0, sizeof(_prefs));
@@ -647,6 +616,7 @@ public:
     _prefs.tx_power_dbm = LORA_TX_POWER;
     _prefs.disable_fwd = 1;
     _prefs.advert_interval = 1;  // default to 2 minutes for NEW installs
+    _prefs.flood_advert_interval = 3;   // 3 hours
     _prefs.flood_max = 64;
   #ifdef ROOM_PASSWORD
     StrHelper::strncpy(_prefs.guest_password, ROOM_PASSWORD, sizeof(_prefs.guest_password));
@@ -712,6 +682,13 @@ public:
       next_local_advert = 0;  // stop the timer
     }
   }
+  void updateFloodAdvertTimer() override {
+    if (_prefs.flood_advert_interval > 0) {  // schedule flood advert timer
+      next_flood_advert = futureMillis( ((uint32_t)_prefs.flood_advert_interval) * 60 * 60 * 1000);
+    } else {
+      next_flood_advert = 0;  // stop the timer
+    }
+  }
 
   void setLoggingOn(bool enable) override { /* no-op */ }
   void eraseLogFile() override { /* no-op */ }
@@ -756,11 +733,15 @@ public:
       next_push = futureMillis(SYNC_PUSH_INTERVAL);
     }
 
-    if (next_local_advert && millisHasNowPassed(next_local_advert)) {
+    if (next_flood_advert && millisHasNowPassed(next_flood_advert)) {
       mesh::Packet* pkt = createSelfAdvert();
-      if (pkt) {
-        sendZeroHop(pkt);
-      }
+      if (pkt) sendFlood(pkt);
+
+      updateFloodAdvertTimer();   // schedule next flood advert
+      updateAdvertTimer();   // also schedule local advert (so they don't overlap)
+    } else if (next_local_advert && millisHasNowPassed(next_local_advert)) {
+      mesh::Packet* pkt = createSelfAdvert();
+      if (pkt) sendZeroHop(pkt);
 
       updateAdvertTimer();   // schedule next local advert
     }
@@ -773,17 +754,6 @@ public:
   }
 };
 
-#if defined(NRF52_PLATFORM)
-RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, SPI);
-#elif defined(LILYGO_TLORA)
-SPIClass spi;
-RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_0, P_LORA_RESET, P_LORA_DIO_1, spi);
-#elif defined(P_LORA_SCLK)
-SPIClass spi;
-RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, spi);
-#else
-RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY);
-#endif
 StdRNG fast_rng;
 SimpleMeshTables tables;
 
@@ -812,44 +782,7 @@ void setup() {
 #endif
   rtc_clock.begin(Wire);
 
-#ifdef SX126X_DIO3_TCXO_VOLTAGE
-  float tcxo = SX126X_DIO3_TCXO_VOLTAGE;
-#else
-  float tcxo = 1.6f;
-#endif
-
-#if defined(NRF52_PLATFORM)
-  SPI.setPins(P_LORA_MISO, P_LORA_SCLK, P_LORA_MOSI);
-  SPI.begin();
-#elif defined(P_LORA_SCLK)
-  spi.begin(P_LORA_SCLK, P_LORA_MISO, P_LORA_MOSI);
-#endif
-  int status = radio.begin(LORA_FREQ, LORA_BW, LORA_SF, LORA_CR, RADIOLIB_SX126X_SYNC_WORD_PRIVATE, LORA_TX_POWER, 8, tcxo);
-#if defined(FAKETEC)
-  if (status == RADIOLIB_ERR_SPI_CMD_FAILED || status == RADIOLIB_ERR_SPI_CMD_INVALID) {
-    #define SX126X_DIO3_TCXO_VOLTAGE (0.0f);
-    tcxo = SX126X_DIO3_TCXO_VOLTAGE;
-    status = radio.begin(LORA_FREQ, LORA_BW, LORA_SF, LORA_CR, RADIOLIB_SX126X_SYNC_WORD_PRIVATE, LORA_TX_POWER, 8, tcxo);
-  }
-#endif
-  if (status != RADIOLIB_ERR_NONE) {
-    delay(5000);
-    Serial.print("ERROR: radio init failed: ");
-    Serial.println(status);
-    halt();
-  }
-
-  radio.setCRC(1);
-
-#ifdef SX126X_CURRENT_LIMIT
-  radio.setCurrentLimit(SX126X_CURRENT_LIMIT);
-#endif
-#ifdef SX126X_DIO2_AS_RF_SWITCH
-  radio.setDio2AsRfSwitch(SX126X_DIO2_AS_RF_SWITCH);
-#endif
-#ifdef SX126X_RX_BOOSTED_GAIN
-  radio.setRxBoostedGainMode(SX126X_RX_BOOSTED_GAIN);
-#endif
+  if (!radio_init()) { halt(); }
 
   fast_rng.begin(radio.random(0x7FFFFFFF));
 
@@ -884,7 +817,7 @@ void setup() {
 #endif
 
   // send out initial Advertisement to the mesh
-  the_mesh.sendSelfAdvertisement(2000);
+  the_mesh.sendSelfAdvertisement(16000);
 }
 
 void loop() {

examples/simple_secure_chat/main.cpp

@@ -15,6 +15,7 @@
 #include <helpers/SimpleMeshTables.h>
 #include <helpers/IdentityStore.h>
 #include <RTClib.h>
+#include <target.h>
 
 /* ---------------------------------- CONFIGURATION ------------------------------------- */
 
@@ -49,44 +50,6 @@
 
 #define  PUBLIC_GROUP_PSK  "izOH6cXN6mrJ5e26oRXNcg=="
 
-#if defined(HELTEC_LORA_V3)
-  #include <helpers/HeltecV3Board.h>
-  #include <helpers/CustomSX1262Wrapper.h>
-  static HeltecV3Board board;
-#elif defined(HELTEC_LORA_V2)
-  #include <helpers/HeltecV2Board.h>
-  #include <helpers/CustomSX1276Wrapper.h>
-  static HeltecV2Board board;
-#elif defined(ARDUINO_XIAO_ESP32C3)
-  #include <helpers/XiaoC3Board.h>
-  #include <helpers/CustomSX1262Wrapper.h>
-  #include <helpers/CustomSX1268Wrapper.h>
-  static XiaoC3Board board;
-#elif defined(SEEED_XIAO_S3) || defined(LILYGO_T3S3)
-  #include <helpers/ESP32Board.h>
-  #include <helpers/CustomSX1262Wrapper.h>
-  static ESP32Board board;
-#elif defined(LILYGO_TLORA)
-  #include <helpers/LilyGoTLoraBoard.h>
-  #include <helpers/CustomSX1276Wrapper.h>
-  static LilyGoTLoraBoard board;
-#elif defined(RAK_4631)
-  #include <helpers/nrf52/RAK4631Board.h>
-  #include <helpers/CustomSX1262Wrapper.h>
-  static RAK4631Board board;
-#elif defined(T1000_E)
-  #include <helpers/nrf52/T1000eBoard.h>
-  #include <helpers/CustomLR1110Wrapper.h>
-  static T1000eBoard board;
-#elif defined(FAKETEC)
-  #include <helpers/nrf52/faketecBoard.h>
-  #include <helpers/CustomSX1262Wrapper.h>
-  #include <helpers/CustomLLCC68Wrapper.h>
-  static faketecBoard board;
-#else
-  #error "need to provide a 'board' object"
-#endif
-
 // Believe it or not, this std C function is busted on some platforms!
 static uint32_t _atoi(const char* sp) {
   uint32_t n = 0;
@@ -548,17 +511,6 @@ public:
   }
 };
 
-#if defined(NRF52_PLATFORM)
-RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, SPI);
-#elif defined(LILYGO_TLORA)
-SPIClass spi;
-RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_0, P_LORA_RESET, P_LORA_DIO_1, spi);
-#elif defined(P_LORA_SCLK)
-SPIClass spi;
-RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, spi);
-#else
-RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY);
-#endif
 StdRNG fast_rng;
 SimpleMeshTables tables;
 MyMesh the_mesh(*new WRAPPER_CLASS(radio, board), fast_rng, *new VolatileRTCClock(), tables);
@@ -571,34 +523,8 @@ void setup() {
   Serial.begin(115200);
 
   board.begin();
-#ifdef SX126X_DIO3_TCXO_VOLTAGE
-  float tcxo = SX126X_DIO3_TCXO_VOLTAGE;
-#else
-  float tcxo = 1.6f;
-#endif
 
-#if defined(NRF52_PLATFORM)
-  SPI.setPins(P_LORA_MISO, P_LORA_SCLK, P_LORA_MOSI);
-  SPI.begin();
-#elif defined(P_LORA_SCLK)
-  spi.begin(P_LORA_SCLK, P_LORA_MISO, P_LORA_MOSI);
-#endif
-  int status = radio.begin(LORA_FREQ, LORA_BW, LORA_SF, LORA_CR, RADIOLIB_SX126X_SYNC_WORD_PRIVATE, LORA_TX_POWER, 8, tcxo);
-  if (status != RADIOLIB_ERR_NONE) {
-    Serial.print("ERROR: radio init failed: ");
-    Serial.println(status);
-    halt();
-  }
-
-  radio.setCRC(1);
-
-#ifdef SX126X_CURRENT_LIMIT
-  radio.setCurrentLimit(SX126X_CURRENT_LIMIT);
-#endif
-
-#ifdef SX126X_DIO2_AS_RF_SWITCH
-  radio.setDio2AsRfSwitch(SX126X_DIO2_AS_RF_SWITCH);
-#endif
+  if (!radio_init()) { halt(); }
 
   fast_rng.begin(radio.random(0x7FFFFFFF));
 

platformio.ini

@@ -41,6 +41,10 @@ build_flags = ${arduino_base.build_flags}
 ;  -D ESP32_CPU_FREQ=80          ; change it to your need
 build_src_filter = ${arduino_base.build_src_filter}
 
+[esp32_ota]
+lib_deps =
+  me-no-dev/ESPAsyncWebServer @ ^3.6.0
+  file://arch/esp32/AsyncElegantOTA
 
 ; ----------------- NRF52 ---------------------
 [nrf52_base]

src/Mesh.h

@@ -4,34 +4,6 @@
 
 namespace mesh {
 
-/**
- * An abstraction of the device's Realtime Clock.
-*/
-class RTCClock {
-  uint32_t last_unique;
-protected:
-  RTCClock() { last_unique = 0; }
-
-public:
-  /**
-   * \returns  the current time. in UNIX epoch seconds.
-  */
-  virtual uint32_t getCurrentTime() = 0;
-
-  /**
-   * \param time  current time in UNIX epoch seconds.
-  */
-  virtual void setCurrentTime(uint32_t time) = 0;
-
-  uint32_t getCurrentTimeUnique() {
-    uint32_t t = getCurrentTime();
-    if (t <= last_unique) {
-      return ++last_unique;
-    }
-    return last_unique = t;
-  }
-};
-
 class GroupChannel {
 public:
   uint8_t hash[PATH_HASH_SIZE];

src/MeshCore.h

@@ -42,7 +42,35 @@ public:
   virtual void reboot() = 0;
   virtual void powerOff() { /* no op */ }
   virtual uint8_t getStartupReason() const = 0;
-  virtual bool startOTAUpdate() { return false; }   // not supported
+  virtual bool startOTAUpdate(const char* id, char reply[]) { return false; }   // not supported
+};
+
+/**
+ * An abstraction of the device's Realtime Clock.
+*/
+class RTCClock {
+  uint32_t last_unique;
+protected:
+  RTCClock() { last_unique = 0; }
+
+public:
+  /**
+   * \returns  the current time. in UNIX epoch seconds.
+  */
+  virtual uint32_t getCurrentTime() = 0;
+
+  /**
+   * \param time  current time in UNIX epoch seconds.
+  */
+  virtual void setCurrentTime(uint32_t time) = 0;
+
+  uint32_t getCurrentTimeUnique() {
+    uint32_t t = getCurrentTime();
+    if (t <= last_unique) {
+      return ++last_unique;
+    }
+    return last_unique = t;
+  }
 };
 
 }

src/helpers/BaseChatMesh.cpp

@@ -229,6 +229,7 @@ void BaseChatMesh::onGroupDataRecv(mesh::Packet* packet, uint8_t type, const mes
 mesh::Packet* BaseChatMesh::composeMsgPacket(const ContactInfo& recipient, uint32_t timestamp, uint8_t attempt, const char *text, uint32_t& expected_ack) {
   int text_len = strlen(text);
   if (text_len > MAX_TEXT_LEN) return NULL;
+  if (attempt > 3 && text_len > MAX_TEXT_LEN-2) return NULL;
 
   uint8_t temp[5+MAX_TEXT_LEN+1];
   memcpy(temp, &timestamp, 4);   // mostly an extra blob to help make packet_hash unique
@@ -238,7 +239,13 @@ mesh::Packet* BaseChatMesh::composeMsgPacket(const ContactInfo& recipient, uint3
   // calc expected ACK reply
   mesh::Utils::sha256((uint8_t *)&expected_ack, 4, temp, 5 + text_len, self_id.pub_key, PUB_KEY_SIZE);
 
-  return createDatagram(PAYLOAD_TYPE_TXT_MSG, recipient.id, recipient.shared_secret, temp, 5 + text_len);
+  int len = 5 + text_len;
+  if (attempt > 3) {
+    temp[len++] = 0;  // null terminator
+    temp[len++] = attempt;  // hide attempt number at tail end of payload
+  }
+
+  return createDatagram(PAYLOAD_TYPE_TXT_MSG, recipient.id, recipient.shared_secret, temp, len);
 }
 
 int  BaseChatMesh::sendMessage(const ContactInfo& recipient, uint32_t timestamp, uint8_t attempt, const char* text, uint32_t& expected_ack, uint32_t& est_timeout) {

src/helpers/CommonCLI.cpp

@@ -14,57 +14,66 @@ static uint32_t _atoi(const char* sp) {
 }
 
 void CommonCLI::loadPrefs(FILESYSTEM* fs) {
-  if (fs->exists("/node_prefs")) {
-    File file = fs->open("/node_prefs");
-    if (file) {
-      uint8_t pad[8];
+  if (fs->exists("/com_prefs")) {
+    loadPrefsInt(fs, "/com_prefs");   // new filename
+  } else if (fs->exists("/node_prefs")) {
+    loadPrefsInt(fs, "/node_prefs");
+    savePrefs(fs);  // save to new filename
+    fs->remove("/node_prefs");  // remove old
+  }
+}
 
-      file.read((uint8_t *) &_prefs->airtime_factor, sizeof(_prefs->airtime_factor));  // 0
-      file.read((uint8_t *) &_prefs->node_name, sizeof(_prefs->node_name));  // 4
-      file.read(pad, 4);   // 36
-      file.read((uint8_t *) &_prefs->node_lat, sizeof(_prefs->node_lat));  // 40
-      file.read((uint8_t *) &_prefs->node_lon, sizeof(_prefs->node_lon));  // 48
-      file.read((uint8_t *) &_prefs->password[0], sizeof(_prefs->password));  // 56
-      file.read((uint8_t *) &_prefs->freq, sizeof(_prefs->freq));   // 72
-      file.read((uint8_t *) &_prefs->tx_power_dbm, sizeof(_prefs->tx_power_dbm));  // 76
-      file.read((uint8_t *) &_prefs->disable_fwd, sizeof(_prefs->disable_fwd));  // 77
-      file.read((uint8_t *) &_prefs->advert_interval, sizeof(_prefs->advert_interval));  // 78
-      file.read((uint8_t *) &_prefs->unused, sizeof(_prefs->unused));  // 79
-      file.read((uint8_t *) &_prefs->rx_delay_base, sizeof(_prefs->rx_delay_base));  // 80
-      file.read((uint8_t *) &_prefs->tx_delay_factor, sizeof(_prefs->tx_delay_factor));  // 84
-      file.read((uint8_t *) &_prefs->guest_password[0], sizeof(_prefs->guest_password));  // 88
-      file.read((uint8_t *) &_prefs->direct_tx_delay_factor, sizeof(_prefs->direct_tx_delay_factor));  // 104
-      file.read(pad, 4);   // 108
-      file.read((uint8_t *) &_prefs->sf, sizeof(_prefs->sf));  // 112
-      file.read((uint8_t *) &_prefs->cr, sizeof(_prefs->cr));  // 113
-      file.read((uint8_t *) &_prefs->reserved1, sizeof(_prefs->reserved1));  // 114
-      file.read((uint8_t *) &_prefs->reserved2, sizeof(_prefs->reserved2));  // 115
-      file.read((uint8_t *) &_prefs->bw, sizeof(_prefs->bw));  // 116
-      file.read(pad, 4);   // 120
-      file.read((uint8_t *) &_prefs->flood_max, sizeof(_prefs->flood_max));   // 124
+void CommonCLI::loadPrefsInt(FILESYSTEM* fs, const char* filename) {
+  File file = fs->open(filename);
+  if (file) {
+    uint8_t pad[8];
 
-      // sanitise bad pref values
-      _prefs->rx_delay_base = constrain(_prefs->rx_delay_base, 0, 20.0f);
-      _prefs->tx_delay_factor = constrain(_prefs->tx_delay_factor, 0, 2.0f);
-      _prefs->direct_tx_delay_factor = constrain(_prefs->direct_tx_delay_factor, 0, 2.0f);
-      _prefs->airtime_factor = constrain(_prefs->airtime_factor, 0, 9.0f);
-      _prefs->freq = constrain(_prefs->freq, 400.0f, 2500.0f);
-      _prefs->bw = constrain(_prefs->bw, 62.5f, 500.0f);
-      _prefs->sf = constrain(_prefs->sf, 7, 12);
-      _prefs->cr = constrain(_prefs->cr, 5, 8);
-      _prefs->tx_power_dbm = constrain(_prefs->tx_power_dbm, 1, 30);
+    file.read((uint8_t *) &_prefs->airtime_factor, sizeof(_prefs->airtime_factor));  // 0
+    file.read((uint8_t *) &_prefs->node_name, sizeof(_prefs->node_name));  // 4
+    file.read(pad, 4);   // 36
+    file.read((uint8_t *) &_prefs->node_lat, sizeof(_prefs->node_lat));  // 40
+    file.read((uint8_t *) &_prefs->node_lon, sizeof(_prefs->node_lon));  // 48
+    file.read((uint8_t *) &_prefs->password[0], sizeof(_prefs->password));  // 56
+    file.read((uint8_t *) &_prefs->freq, sizeof(_prefs->freq));   // 72
+    file.read((uint8_t *) &_prefs->tx_power_dbm, sizeof(_prefs->tx_power_dbm));  // 76
+    file.read((uint8_t *) &_prefs->disable_fwd, sizeof(_prefs->disable_fwd));  // 77
+    file.read((uint8_t *) &_prefs->advert_interval, sizeof(_prefs->advert_interval));  // 78
+    file.read((uint8_t *) pad, 1);  // 79  was 'unused'
+    file.read((uint8_t *) &_prefs->rx_delay_base, sizeof(_prefs->rx_delay_base));  // 80
+    file.read((uint8_t *) &_prefs->tx_delay_factor, sizeof(_prefs->tx_delay_factor));  // 84
+    file.read((uint8_t *) &_prefs->guest_password[0], sizeof(_prefs->guest_password));  // 88
+    file.read((uint8_t *) &_prefs->direct_tx_delay_factor, sizeof(_prefs->direct_tx_delay_factor));  // 104
+    file.read(pad, 4);   // 108
+    file.read((uint8_t *) &_prefs->sf, sizeof(_prefs->sf));  // 112
+    file.read((uint8_t *) &_prefs->cr, sizeof(_prefs->cr));  // 113
+    file.read((uint8_t *) &_prefs->allow_read_only, sizeof(_prefs->allow_read_only));  // 114
+    file.read((uint8_t *) &_prefs->reserved2, sizeof(_prefs->reserved2));  // 115
+    file.read((uint8_t *) &_prefs->bw, sizeof(_prefs->bw));  // 116
+    file.read(pad, 4);   // 120
+    file.read((uint8_t *) &_prefs->flood_max, sizeof(_prefs->flood_max));   // 124
+    file.read((uint8_t *) &_prefs->flood_advert_interval, sizeof(_prefs->flood_advert_interval));  // 125
 
-      file.close();
-    }
+    // sanitise bad pref values
+    _prefs->rx_delay_base = constrain(_prefs->rx_delay_base, 0, 20.0f);
+    _prefs->tx_delay_factor = constrain(_prefs->tx_delay_factor, 0, 2.0f);
+    _prefs->direct_tx_delay_factor = constrain(_prefs->direct_tx_delay_factor, 0, 2.0f);
+    _prefs->airtime_factor = constrain(_prefs->airtime_factor, 0, 9.0f);
+    _prefs->freq = constrain(_prefs->freq, 400.0f, 2500.0f);
+    _prefs->bw = constrain(_prefs->bw, 62.5f, 500.0f);
+    _prefs->sf = constrain(_prefs->sf, 7, 12);
+    _prefs->cr = constrain(_prefs->cr, 5, 8);
+    _prefs->tx_power_dbm = constrain(_prefs->tx_power_dbm, 1, 30);
+
+    file.close();
   }
 }
 
 void CommonCLI::savePrefs(FILESYSTEM* fs) {
 #if defined(NRF52_PLATFORM)
-  File file = fs->open("/node_prefs", FILE_O_WRITE);
+  File file = fs->open("/com_prefs", FILE_O_WRITE);
   if (file) { file.seek(0); file.truncate(); }
 #else
-  File file = fs->open("/node_prefs", "w", true);
+  File file = fs->open("/com_prefs", "w", true);
 #endif
   if (file) {
     uint8_t pad[8];
@@ -80,7 +89,7 @@ void CommonCLI::savePrefs(FILESYSTEM* fs) {
     file.write((uint8_t *) &_prefs->tx_power_dbm, sizeof(_prefs->tx_power_dbm));  // 76
     file.write((uint8_t *) &_prefs->disable_fwd, sizeof(_prefs->disable_fwd));  // 77
     file.write((uint8_t *) &_prefs->advert_interval, sizeof(_prefs->advert_interval));  // 78
-    file.write((uint8_t *) &_prefs->unused, sizeof(_prefs->unused));  // 79
+    file.write((uint8_t *) pad, 1);  // 79  was 'unused'
     file.write((uint8_t *) &_prefs->rx_delay_base, sizeof(_prefs->rx_delay_base));  // 80
     file.write((uint8_t *) &_prefs->tx_delay_factor, sizeof(_prefs->tx_delay_factor));  // 84
     file.write((uint8_t *) &_prefs->guest_password[0], sizeof(_prefs->guest_password));  // 88
@@ -88,11 +97,12 @@ void CommonCLI::savePrefs(FILESYSTEM* fs) {
     file.write(pad, 4);   // 108
     file.write((uint8_t *) &_prefs->sf, sizeof(_prefs->sf));  // 112
     file.write((uint8_t *) &_prefs->cr, sizeof(_prefs->cr));  // 113
-    file.write((uint8_t *) &_prefs->reserved1, sizeof(_prefs->reserved1));  // 114
+    file.write((uint8_t *) &_prefs->allow_read_only, sizeof(_prefs->allow_read_only));  // 114
     file.write((uint8_t *) &_prefs->reserved2, sizeof(_prefs->reserved2));  // 115
     file.write((uint8_t *) &_prefs->bw, sizeof(_prefs->bw));  // 116
     file.write(pad, 4);   // 120
     file.write((uint8_t *) &_prefs->flood_max, sizeof(_prefs->flood_max));   // 124
+    file.write((uint8_t *) &_prefs->flood_advert_interval, sizeof(_prefs->flood_advert_interval));  // 125
 
     file.close();
   }
@@ -129,9 +139,7 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch
         strcpy(reply, "ERR: clock cannot go backwards");
       }
     } else if (memcmp(command, "start ota", 9) == 0) {
-      if (_board->startOTAUpdate()) {
-        strcpy(reply, "OK");
-      } else {
+      if (!_board->startOTAUpdate(_prefs->node_name, reply)) {
         strcpy(reply, "Error");
       }
     } else if (memcmp(command, "clock", 5) == 0) {
@@ -157,6 +165,10 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch
       const char* config = &command[4];
       if (memcmp(config, "af", 2) == 0) {
         sprintf(reply, "> %s", StrHelper::ftoa(_prefs->airtime_factor));
+      } else if (memcmp(config, "allow.read.only", 15) == 0) {
+        sprintf(reply, "> %s", _prefs->allow_read_only ? "on" : "off");
+      } else if (memcmp(config, "flood.advert.interval", 21) == 0) {
+        sprintf(reply, "> %d", ((uint32_t) _prefs->flood_advert_interval));
       } else if (memcmp(config, "advert.interval", 15) == 0) {
         sprintf(reply, "> %d", ((uint32_t) _prefs->advert_interval) * 2);
       } else if (memcmp(config, "guest.password", 14) == 0) {
@@ -195,6 +207,22 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch
         _prefs->airtime_factor = atof(&config[3]);
         savePrefs();
         strcpy(reply, "OK");
+      } else if (memcmp(config, "allow.read.only ", 16) == 0) {
+        _prefs->allow_read_only = memcmp(&config[16], "on", 2) == 0;
+        savePrefs();
+        strcpy(reply, "OK");
+      } else if (memcmp(config, "flood.advert.interval ", 22) == 0) {
+        int hours = _atoi(&config[22]);
+        if (hours > 0 && hours < 3) {
+          sprintf(reply, "Error: min is 3 hours");
+        } else if (hours > 48) {
+          strcpy(reply, "Error: max is 48 hours");
+        } else {
+          _prefs->flood_advert_interval = (uint8_t)(hours);
+          _callbacks->updateFloodAdvertTimer();
+          savePrefs();
+          strcpy(reply, "OK");
+        }
       } else if (memcmp(config, "advert.interval ", 16) == 0) {
         int mins = _atoi(&config[16]);
         if (mins > 0 && mins < MIN_LOCAL_ADVERT_INTERVAL) {

src/helpers/CommonCLI.h

@@ -11,8 +11,8 @@ struct NodePrefs {  // persisted to file
     float freq;
     uint8_t tx_power_dbm;
     uint8_t disable_fwd;
-    uint8_t advert_interval;   // minutes
-    uint8_t unused;
+    uint8_t advert_interval;   // minutes / 2
+    uint8_t flood_advert_interval;   // hours
     float rx_delay_base;
     float tx_delay_factor;
     char guest_password[16];
@@ -20,7 +20,7 @@ struct NodePrefs {  // persisted to file
     uint32_t guard;
     uint8_t sf;
     uint8_t cr;
-    uint8_t reserved1;
+    uint8_t allow_read_only;
     uint8_t reserved2;
     float bw;
     uint8_t flood_max;
@@ -34,6 +34,7 @@ public:
   virtual bool formatFileSystem() = 0;
   virtual void sendSelfAdvertisement(int delay_millis) = 0;
   virtual void updateAdvertTimer() = 0;
+  virtual void updateFloodAdvertTimer() = 0;
   virtual void setLoggingOn(bool enable) = 0;
   virtual void eraseLogFile() = 0;
   virtual void dumpLogFile() = 0;
@@ -52,6 +53,8 @@ class CommonCLI {
 
   void checkAdvertInterval();
 
+  void loadPrefsInt(FILESYSTEM* _fs, const char* filename);
+
 public:
   CommonCLI(mesh::MainBoard& board, mesh::Mesh* mesh, NodePrefs* prefs, CommonCLICallbacks* callbacks) 
       : _board(&board), _mesh(mesh), _prefs(prefs), _callbacks(callbacks) { }

src/helpers/ESP32Board.cpp

@@ -0,0 +1,41 @@
+#ifdef ESP_PLATFORM
+
+#include "ESP32Board.h"
+
+#if defined(ADMIN_PASSWORD)   // Repeater or Room Server only
+#include <WiFi.h>
+#include <AsyncTCP.h>
+#include <ESPAsyncWebServer.h>
+#include <AsyncElegantOTA.h>
+
+bool ESP32Board::startOTAUpdate(const char* id, char reply[]) {
+  WiFi.softAP("MeshCore-OTA", NULL);
+
+  sprintf(reply, "Started: http://%s/update", WiFi.softAPIP().toString().c_str());
+  MESH_DEBUG_PRINTLN("startOTAUpdate: %s", reply);
+
+  static char id_buf[60];
+  sprintf(id_buf, "%s (%s)", id, getManufacturerName());
+  static char home_buf[90];
+  sprintf(home_buf, "<H2>Hi! I am a MeshCore Repeater. ID: %s</H2>", id);
+
+  AsyncWebServer* server = new AsyncWebServer(80);
+
+  server->on("/", HTTP_GET, [](AsyncWebServerRequest *request) {
+    request->send(200, "text/html", home_buf);
+  });
+
+  AsyncElegantOTA.setID(id_buf);
+  AsyncElegantOTA.begin(server);    // Start ElegantOTA
+  server->begin();
+
+  return true;
+}
+
+#else
+bool ESP32Board::startOTAUpdate(const char* id, char reply[]) {
+  return false; // not supported
+}
+#endif
+
+#endif

src/helpers/ESP32Board.h

@@ -7,6 +7,7 @@
 
 #include <rom/rtc.h>
 #include <sys/time.h>
+#include <Wire.h>
 
 class ESP32Board : public mesh::MainBoard {
 protected:
@@ -73,6 +74,8 @@ public:
   void reboot() override {
     esp_restart();
   }
+
+  bool startOTAUpdate(const char* id, char reply[]) override;
 };
 
 class ESP32RTCClock : public mesh::RTCClock {

src/helpers/TBeamBoard.h

@@ -37,6 +37,8 @@ public:
     power.setALDO2Voltage(3300);
     power.enableALDO2();
 
+    pinMode(38,INPUT_PULLUP);
+
     esp_reset_reason_t reason = esp_reset_reason();
     if (reason == ESP_RST_DEEPSLEEP) {
       long wakeup_source = esp_sleep_get_ext1_wakeup_status();

src/helpers/nrf52/RAK4631Board.cpp

@@ -37,7 +37,7 @@ void RAK4631Board::begin() {
   delay(10);   // give sx1262 some time to power up
 }
 
-bool RAK4631Board::startOTAUpdate() {
+bool RAK4631Board::startOTAUpdate(const char* id, char reply[]) {
   // Config the peripheral connection with maximum bandwidth
   // more SRAM required by SoftDevice
   // Note: All config***() function must be called before begin()
@@ -76,5 +76,6 @@ bool RAK4631Board::startOTAUpdate() {
   Bluefruit.Advertising.setFastTimeout(30);   // number of seconds in fast mode
   Bluefruit.Advertising.start(0);             // 0 = Don't stop advertising after n seconds
 
+  strcpy(reply, "OK - started");
   return true;
 }

src/helpers/nrf52/RAK4631Board.h

@@ -50,5 +50,5 @@ public:
     NVIC_SystemReset();
   }
 
-  bool startOTAUpdate() override;
+  bool startOTAUpdate(const char* id, char reply[]) override;
 };

src/helpers/nrf52/T1000eBoard.cpp

@@ -9,6 +9,8 @@ void T1000eBoard::begin() {
   startup_reason = BD_STARTUP_NORMAL;
   btn_prev_state = HIGH;
 
+  sd_power_mode_set(NRF_POWER_MODE_LOWPWR);
+
 #ifdef BUTTON_PIN
   pinMode(BATTERY_PIN, INPUT);
   pinMode(BUTTON_PIN, INPUT);
@@ -40,7 +42,7 @@ static void disconnect_callback(uint16_t conn_handle, uint8_t reason) {
 }
 
 
-bool TrackerT1000eBoard::startOTAUpdate() {
+bool TrackerT1000eBoard::startOTAUpdate(const char* id, char reply[]) {
   // Config the peripheral connection with maximum bandwidth
   // more SRAM required by SoftDevice
   // Note: All config***() function must be called before begin()
@@ -79,6 +81,7 @@ bool TrackerT1000eBoard::startOTAUpdate() {
   Bluefruit.Advertising.setFastTimeout(30);   // number of seconds in fast mode
   Bluefruit.Advertising.start(0);             // 0 = Don't stop advertising after n seconds
 
+  strcpy(reply, "OK - started");
   return true;
 }
 #endif

src/helpers/nrf52/T1000eBoard.h

@@ -90,5 +90,5 @@ public:
     NVIC_SystemReset();
   }
 
-//  bool startOTAUpdate() override;
+//  bool startOTAUpdate(const char* id, char reply[]) override;
 };

src/helpers/nrf52/T114Board.cpp

@@ -42,7 +42,7 @@ void T114Board::begin() {
   delay(10);   // give sx1262 some time to power up
 }
 
-bool T114Board::startOTAUpdate() {
+bool T114Board::startOTAUpdate(const char* id, char reply[]) {
   // Config the peripheral connection with maximum bandwidth
   // more SRAM required by SoftDevice
   // Note: All config***() function must be called before begin()
@@ -81,5 +81,6 @@ bool T114Board::startOTAUpdate() {
   Bluefruit.Advertising.setFastTimeout(30);   // number of seconds in fast mode
   Bluefruit.Advertising.start(0);             // 0 = Don't stop advertising after n seconds
 
+  strcpy(reply, "OK - started");
   return true;
 }

src/helpers/nrf52/T114Board.h

@@ -18,7 +18,8 @@
 
 // built-ins
 #define  PIN_VBAT_READ    4
-#define  ADC_MULTIPLIER   (3 * 1.73 * 1.187 * 1000)
+#define  PIN_BAT_CTL      6
+#define  MV_LSB   (3000.0F / 4096.0F) // 12-bit ADC with 3.0V input range
 
 class T114Board : public mesh::MainBoard {
 protected:
@@ -37,17 +38,18 @@ public:
   }
 #endif
 
-  #define BATTERY_SAMPLES 8
-
   uint16_t getBattMilliVolts() override {
+    int adcvalue = 0;
     analogReadResolution(12);
-    uint32_t raw = 0;
-    for (int i = 0; i < BATTERY_SAMPLES; i++) {
-      raw += analogRead(PIN_VBAT_READ);
-    }
-    raw = raw / BATTERY_SAMPLES;
+    analogReference(AR_INTERNAL_3_0);
+    pinMode(PIN_BAT_CTL, OUTPUT);          // battery adc can be read only ctrl pin 6 set to high
+    digitalWrite(PIN_BAT_CTL, 1);
 
-    return (ADC_MULTIPLIER * raw) / 4096;
+    delay(10);
+    adcvalue = analogRead(PIN_VBAT_READ);
+    digitalWrite(6, 0);
+
+    return (uint16_t)((float)adcvalue * MV_LSB * 4.9);
   }
 
   const char* getManufacturerName() const override {
@@ -58,5 +60,5 @@ public:
     NVIC_SystemReset();
   }
 
-  bool startOTAUpdate() override;
+  bool startOTAUpdate(const char* id, char reply[]) override;
 };

src/helpers/nrf52/TechoBoard.cpp

@@ -1,6 +1,8 @@
 #include <Arduino.h>
 #include "TechoBoard.h"
 
+#ifdef LILYGO_TECHO
+
 #include <bluefruit.h>
 #include <Wire.h>
 
@@ -22,11 +24,18 @@ void TechoBoard::begin() {
   // for future use, sub-classes SHOULD call this from their begin()
   startup_reason = BD_STARTUP_NORMAL;
 
-  pinMode(PIN_VBAT_READ, INPUT);
+  delay(200);
+  pinMode(PIN_PWR_EN, OUTPUT);
+  digitalWrite(PIN_PWR_EN, HIGH);
+  pinMode(PIN_BUTTON1, INPUT_PULLUP);
+  pinMode(PIN_BUTTON2, INPUT_PULLUP);
+  pinMode(LED_RED, OUTPUT);
+  pinMode(LED_GREEN, OUTPUT);
+  pinMode(LED_BLUE, OUTPUT);
+  delay(200);
 
-#if defined(PIN_BOARD_SDA) && defined(PIN_BOARD_SCL)
-  Wire.setPins(PIN_BOARD_SDA, PIN_BOARD_SCL)
-#endif
+  pinMode(PIN_TXCO, OUTPUT);
+  digitalWrite(PIN_TXCO, HIGH);
 
   Wire.begin();
 
@@ -35,7 +44,21 @@ void TechoBoard::begin() {
   delay(10);   // give sx1262 some time to power up
 }
 
-bool TechoBoard::startOTAUpdate() {
+uint16_t TechoBoard::getBattMilliVolts() {
+  int adcvalue = 0;
+
+  analogReference(AR_INTERNAL_3_0);
+  analogReadResolution(12);
+  delay(10);
+
+  // ADC range is 0..3000mV and resolution is 12-bit (0..4095)
+  adcvalue = analogRead(PIN_VBAT_READ);
+  // Convert the raw value to compensated mv, taking the resistor-
+  // divider into account (providing the actual LIPO voltage)
+  return (uint16_t)((float)adcvalue * REAL_VBAT_MV_PER_LSB);
+}
+
+bool TechoBoard::startOTAUpdate(const char* id, char reply[]) {
   // Config the peripheral connection with maximum bandwidth
   // more SRAM required by SoftDevice
   // Note: All config***() function must be called before begin()
@@ -74,5 +97,7 @@ bool TechoBoard::startOTAUpdate() {
   Bluefruit.Advertising.setFastTimeout(30);   // number of seconds in fast mode
   Bluefruit.Advertising.start(0);             // 0 = Don't stop advertising after n seconds
 
+  strcpy(reply, "OK - started");
   return true;
 }
+#endif

src/helpers/nrf52/TechoBoard.h

@@ -17,28 +17,26 @@
 #define SX126X_DIO3_TCXO_VOLTAGE   1.8
 
 // built-ins
-#define  PIN_VBAT_READ    4
-#define  ADC_MULTIPLIER   (2.0)
+#define VBAT_MV_PER_LSB   (0.73242188F)   // 3.0V ADC range and 12-bit ADC resolution = 3000mV/4096
+
+#define VBAT_DIVIDER      (0.5F)          // 150K + 150K voltage divider on VBAT
+#define VBAT_DIVIDER_COMP (2.0F)          // Compensation factor for the VBAT divider
+
+#define PIN_VBAT_READ     (4)
+#define REAL_VBAT_MV_PER_LSB (VBAT_DIVIDER_COMP * VBAT_MV_PER_LSB)
 
 class TechoBoard : public mesh::MainBoard {
 protected:
   uint8_t startup_reason;
 
 public:
+
   void begin();
-  uint8_t getStartupReason() const override { return startup_reason; }
+  uint16_t getBattMilliVolts() override;
+  bool startOTAUpdate(const char* id, char reply[]) override;
 
-  #define BATTERY_SAMPLES 8
-
-  uint16_t getBattMilliVolts() override {
-    analogReadResolution(12);
-    uint32_t raw = 0;
-    for (int i = 0; i < BATTERY_SAMPLES; i++) {
-      raw += analogRead(PIN_VBAT_READ);
-    }
-    raw = raw / BATTERY_SAMPLES;
-
-    return (ADC_MULTIPLIER * raw) / 4096;
+  uint8_t getStartupReason() const override {
+    return startup_reason;
   }
 
   const char* getManufacturerName() const override {
@@ -48,6 +46,4 @@ public:
   void reboot() override {
     NVIC_SystemReset();
   }
-
-  bool startOTAUpdate() override;
 };

src/helpers/nrf52/faketecBoard.cpp

@@ -6,19 +6,40 @@
 
 static BLEDfu bledfu;
 
+void FaketecBoard::begin() {    
+    // for future use, sub-classes SHOULD call this from their begin()
+    startup_reason = BD_STARTUP_NORMAL;
+    btn_prev_state = HIGH;
+  
+    pinMode(PIN_VBAT_READ, INPUT);
+
+    #ifdef BUTTON_PIN
+      pinMode(BUTTON_PIN, INPUT);
+    #endif
+
+    #if defined(PIN_BOARD_SDA) && defined(PIN_BOARD_SCL)
+      Wire.setPins(PIN_BOARD_SDA, PIN_BOARD_SCL);
+    #endif
+    
+    Wire.begin();
+
+    pinMode(SX126X_POWER_EN, OUTPUT);
+    digitalWrite(SX126X_POWER_EN, HIGH);
+    delay(10);   // give sx1262 some time to power up
+}
+
 static void connect_callback(uint16_t conn_handle) {
-  (void)conn_handle;
-  MESH_DEBUG_PRINTLN("BLE client connected");
+    (void)conn_handle;
+    MESH_DEBUG_PRINTLN("BLE client connected");
 }
 
 static void disconnect_callback(uint16_t conn_handle, uint8_t reason) {
-  (void)conn_handle;
-  (void)reason;
-
-  MESH_DEBUG_PRINTLN("BLE client disconnected");
+    (void)conn_handle;
+    (void)reason;
+    MESH_DEBUG_PRINTLN("BLE client disconnected");
 }
 
-bool faketecBoard::startOTAUpdate() {
+bool FaketecBoard::startOTAUpdate(const char* id, char reply[]) {
   // Config the peripheral connection with maximum bandwidth
   // more SRAM required by SoftDevice
   // Note: All config***() function must be called before begin()
@@ -57,5 +78,6 @@ bool faketecBoard::startOTAUpdate() {
   Bluefruit.Advertising.setFastTimeout(30);   // number of seconds in fast mode
   Bluefruit.Advertising.start(0);             // 0 = Don't stop advertising after n seconds
 
+  strcpy(reply, "OK - started");
   return true;
 }

src/helpers/nrf52/faketecBoard.h

@@ -2,7 +2,6 @@
 
 #include <MeshCore.h>
 #include <Arduino.h>
-#include <Wire.h>
 
 #define P_LORA_NSS 13 //P1.13 45
 #define P_LORA_DIO_1 11 //P0.10 10
@@ -20,27 +19,13 @@
 #define  PIN_VBAT_READ 17
 #define  ADC_MULTIPLIER   (1.815f) // dependent on voltage divider resistors. TODO: more accurate battery tracking
 
-class faketecBoard : public mesh::MainBoard {
+class FaketecBoard : public mesh::MainBoard {
 protected:
   uint8_t startup_reason;
+  uint8_t btn_prev_state;
 
 public:
-  void begin() {
-    // for future use, sub-classes SHOULD call this from their begin()
-    startup_reason = BD_STARTUP_NORMAL;
-
-    pinMode(PIN_VBAT_READ, INPUT);
-
-#if defined(PIN_BOARD_SDA) && defined(PIN_BOARD_SCL)
-    Wire.setPins(PIN_BOARD_SDA, PIN_BOARD_SCL)
-#endif
-
-    Wire.begin();
-
-    pinMode(SX126X_POWER_EN, OUTPUT);
-    digitalWrite(SX126X_POWER_EN, HIGH);
-    delay(10);   // give sx1262 some time to power up
-  }
+  void begin();
 
   uint8_t getStartupReason() const override { return startup_reason; }
 
@@ -61,9 +46,20 @@ public:
     return "Faketec DIY";
   }
 
+  int buttonStateChanged() {
+    #ifdef BUTTON_PIN
+      uint8_t v = digitalRead(BUTTON_PIN);
+      if (v != btn_prev_state) {
+        btn_prev_state = v;
+        return (v == LOW) ? 1 : -1;
+      }
+    #endif
+      return 0;
+  }
+
   void reboot() override {
     NVIC_SystemReset();
   }
 
-  bool startOTAUpdate() override;
+  bool startOTAUpdate(const char* id, char reply[]) override;
 };

variants/heltec_v2/platformio.ini

@@ -3,6 +3,7 @@ extends = esp32_base
 board = heltec_wifi_lora_32_V2   ; heltec_wifi_lora_32_V2
 build_flags =
   ${esp32_base.build_flags}
+  -I variants/heltec_v2
   -D HELTEC_LORA_V2
   -D PIN_BOARD_SDA=4
   -D PIN_BOARD_SCL=15
@@ -13,6 +14,7 @@ build_flags =
   -D LORA_TX_POWER=20
   -D P_LORA_TX_LED=25
 build_src_filter = ${esp32_base.build_src_filter}
+  +<../variants/heltec_v2>
 lib_deps =
   ${esp32_base.lib_deps}
   adafruit/Adafruit SSD1306 @ ^2.5.13
@@ -31,6 +33,9 @@ build_flags =
 build_src_filter = ${Heltec_lora32_v2.build_src_filter}
   +<../examples/simple_repeater>
   +<helpers/ui/*.cpp>
+lib_deps =
+  ${Heltec_lora32_v2.lib_deps}
+  ${esp32_ota.lib_deps}
 
 [env:Heltec_v2_room_server]
 extends = Heltec_lora32_v2
@@ -47,6 +52,9 @@ build_flags =
 build_src_filter = ${Heltec_lora32_v2.build_src_filter}
   +<helpers/ui/*.cpp>
   +<../examples/simple_room_server>
+lib_deps =
+  ${Heltec_lora32_v2.lib_deps}
+  ${esp32_ota.lib_deps}
 
 [env:Heltec_v2_terminal_chat]
 extends = Heltec_lora32_v2

variants/heltec_v2/target.cpp

@@ -0,0 +1,31 @@
+#include <Arduino.h>
+#include "target.h"
+
+HeltecV2Board board;
+
+#if defined(P_LORA_SCLK)
+  static SPIClass spi;
+  RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, spi);
+#else
+  RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY);
+#endif
+
+#ifndef LORA_CR
+  #define LORA_CR      5
+#endif
+
+bool radio_init() {
+#if defined(P_LORA_SCLK)
+  spi.begin(P_LORA_SCLK, P_LORA_MISO, P_LORA_MOSI);
+#endif
+  int status = radio.begin(LORA_FREQ, LORA_BW, LORA_SF, LORA_CR, RADIOLIB_SX126X_SYNC_WORD_PRIVATE, LORA_TX_POWER, 8);
+  if (status != RADIOLIB_ERR_NONE) {
+    Serial.print("ERROR: radio init failed: ");
+    Serial.println(status);
+    return false;  // fail
+  }
+
+  radio.setCRC(1);
+  
+  return true;  // success
+}

variants/heltec_v2/target.h

@@ -0,0 +1,9 @@
+#pragma once
+
+#include <helpers/HeltecV2Board.h>
+#include <helpers/CustomSX1276Wrapper.h>
+
+extern HeltecV2Board board;
+extern RADIO_CLASS radio;
+
+bool radio_init();

variants/heltec_v3/platformio.ini

@@ -3,6 +3,7 @@ extends = esp32_base
 board = esp32-s3-devkitc-1
 build_flags =
   ${esp32_base.build_flags}
+  -I variants/heltec_v3
   -D HELTEC_LORA_V3
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
@@ -16,6 +17,7 @@ build_flags =
   -D SX126X_CURRENT_LIMIT=130.0f  ; for best TX power!
   -D SX126X_RX_BOOSTED_GAIN=1
 build_src_filter = ${esp32_base.build_src_filter}
+  +<../variants/heltec_v3>
 lib_deps =
   ${esp32_base.lib_deps}
   adafruit/Adafruit SSD1306 @ ^2.5.13
@@ -34,6 +36,9 @@ build_flags =
 build_src_filter = ${Heltec_lora32_v3.build_src_filter}
   +<helpers/ui/*.cpp>
   +<../examples/simple_repeater>
+lib_deps =
+  ${Heltec_lora32_v3.lib_deps}
+  ${esp32_ota.lib_deps}
 
 [env:Heltec_v3_room_server]
 extends = Heltec_lora32_v3
@@ -50,6 +55,9 @@ build_flags =
 build_src_filter = ${Heltec_lora32_v3.build_src_filter}
   +<helpers/ui/*.cpp>
   +<../examples/simple_room_server>
+lib_deps =
+  ${Heltec_lora32_v3.lib_deps}
+  ${esp32_ota.lib_deps}
 
 [env:Heltec_v3_terminal_chat]
 extends = Heltec_lora32_v3
@@ -138,6 +146,9 @@ build_flags =
 ;  -D MESH_DEBUG=1
 build_src_filter = ${Heltec_lora32_v3.build_src_filter}
   +<../examples/simple_repeater>
+lib_deps =
+  ${Heltec_lora32_v3.lib_deps}
+  ${esp32_ota.lib_deps}
 
 [env:Heltec_WSL3_room_server]
 extends = Heltec_lora32_v3
@@ -152,6 +163,9 @@ build_flags =
   -D ROOM_PASSWORD='"hello"'
 ;  -D MESH_PACKET_LOGGING=1
 ;  -D MESH_DEBUG=1
+lib_deps =
+  ${Heltec_lora32_v3.lib_deps}
+  ${esp32_ota.lib_deps}
 
 [env:Heltec_WSL3_companion_radio_ble]
 extends = Heltec_lora32_v3

variants/heltec_v3/target.cpp

@@ -0,0 +1,47 @@
+#include <Arduino.h>
+#include "target.h"
+
+HeltecV3Board board;
+
+#if defined(P_LORA_SCLK)
+  static SPIClass spi;
+  RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, spi);
+#else
+  RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY);
+#endif
+
+#ifndef LORA_CR
+  #define LORA_CR      5
+#endif
+
+bool radio_init() {
+#ifdef SX126X_DIO3_TCXO_VOLTAGE
+  float tcxo = SX126X_DIO3_TCXO_VOLTAGE;
+#else
+  float tcxo = 1.6f;
+#endif
+
+#if defined(P_LORA_SCLK)
+  spi.begin(P_LORA_SCLK, P_LORA_MISO, P_LORA_MOSI);
+#endif
+  int status = radio.begin(LORA_FREQ, LORA_BW, LORA_SF, LORA_CR, RADIOLIB_SX126X_SYNC_WORD_PRIVATE, LORA_TX_POWER, 8, tcxo);
+  if (status != RADIOLIB_ERR_NONE) {
+    Serial.print("ERROR: radio init failed: ");
+    Serial.println(status);
+    return false;  // fail
+  }
+  
+  radio.setCRC(1);
+  
+#ifdef SX126X_CURRENT_LIMIT
+  radio.setCurrentLimit(SX126X_CURRENT_LIMIT);
+#endif
+#ifdef SX126X_DIO2_AS_RF_SWITCH
+  radio.setDio2AsRfSwitch(SX126X_DIO2_AS_RF_SWITCH);
+#endif
+#ifdef SX126X_RX_BOOSTED_GAIN
+  radio.setRxBoostedGainMode(SX126X_RX_BOOSTED_GAIN);
+#endif
+
+  return true;  // success
+}

variants/heltec_v3/target.h

@@ -0,0 +1,9 @@
+#pragma once
+
+#include <helpers/HeltecV3Board.h>
+#include <helpers/CustomSX1262Wrapper.h>
+
+extern HeltecV3Board board;
+extern RADIO_CLASS radio;
+
+bool radio_init();

variants/lilygo_t3s3/platformio.ini

@@ -3,6 +3,7 @@ extends = esp32_base
 board = t3_s3_v1_x
 build_flags =
   ${esp32_base.build_flags}
+  -I variants/lilygo_t3s3
   -D LILYGO_T3S3
   -D P_LORA_DIO_1=33
   -D P_LORA_NSS=7
@@ -26,6 +27,7 @@ build_flags =
   -D LORA_TX_POWER=22
   -D SX126X_RX_BOOSTED_GAIN=1
 build_src_filter = ${esp32_base.build_src_filter}
+  +<../variants/lilygo_t3s3>
 lib_deps =
   ${esp32_base.lib_deps}
   adafruit/Adafruit SSD1306 @ ^2.5.13
@@ -45,6 +47,9 @@ build_flags =
 build_src_filter = ${LilyGo_T3S3_sx1262.build_src_filter}
   +<helpers/ui/*.cpp>
   +<../examples/simple_repeater>
+lib_deps =
+  ${LilyGo_T3S3_sx1262.lib_deps}
+  ${esp32_ota.lib_deps}
 
 [env:LilyGo_T3S3_sx1262_terminal_chat]
 extends = LilyGo_T3S3_sx1262
@@ -75,6 +80,9 @@ build_flags =
 build_src_filter = ${LilyGo_T3S3_sx1262.build_src_filter}
   +<helpers/ui/*.cpp>
   +<../examples/simple_room_server>
+lib_deps =
+  ${LilyGo_T3S3_sx1262.lib_deps}
+  ${esp32_ota.lib_deps}
 
 [env:LilyGo_T3S3_sx1262_companion_radio_usb]
 extends = LilyGo_T3S3_sx1262

variants/lilygo_t3s3/target.cpp

@@ -0,0 +1,47 @@
+#include <Arduino.h>
+#include "target.h"
+
+ESP32Board board;
+
+#if defined(P_LORA_SCLK)
+  static SPIClass spi;
+  RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, spi);
+#else
+  RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY);
+#endif
+
+#ifndef LORA_CR
+  #define LORA_CR      5
+#endif
+
+bool radio_init() {
+#ifdef SX126X_DIO3_TCXO_VOLTAGE
+  float tcxo = SX126X_DIO3_TCXO_VOLTAGE;
+#else
+  float tcxo = 1.6f;
+#endif
+
+#if defined(P_LORA_SCLK)
+  spi.begin(P_LORA_SCLK, P_LORA_MISO, P_LORA_MOSI);
+#endif
+  int status = radio.begin(LORA_FREQ, LORA_BW, LORA_SF, LORA_CR, RADIOLIB_SX126X_SYNC_WORD_PRIVATE, LORA_TX_POWER, 8, tcxo);
+  if (status != RADIOLIB_ERR_NONE) {
+    Serial.print("ERROR: radio init failed: ");
+    Serial.println(status);
+    return false;  // fail
+  }
+  
+  radio.setCRC(1);
+  
+#ifdef SX126X_CURRENT_LIMIT
+  radio.setCurrentLimit(SX126X_CURRENT_LIMIT);
+#endif
+#ifdef SX126X_DIO2_AS_RF_SWITCH
+  radio.setDio2AsRfSwitch(SX126X_DIO2_AS_RF_SWITCH);
+#endif
+#ifdef SX126X_RX_BOOSTED_GAIN
+  radio.setRxBoostedGainMode(SX126X_RX_BOOSTED_GAIN);
+#endif
+
+  return true;  // success
+}

variants/lilygo_t3s3/target.h

@@ -0,0 +1,9 @@
+#pragma once
+
+#include <helpers/ESP32Board.h>
+#include <helpers/CustomSX1262Wrapper.h>
+
+extern ESP32Board board;
+extern RADIO_CLASS radio;
+
+bool radio_init();

variants/lilygo_tbeam/platformio.ini

@@ -3,19 +3,29 @@ extends = esp32_base
 board = ttgo-t-beam
 build_flags =
   ${esp32_base.build_flags}
+  -I variants/lilygo_tbeam
   -D LILYGO_TBEAM
   -D RADIO_CLASS=CustomSX1276
   -D WRAPPER_CLASS=CustomSX1276Wrapper
   -D LORA_TX_POWER=20
   -D P_LORA_TX_LED=4
+  -D PIN_BOARD_SDA=21
+  -D PIN_BOARD_SCL=22
+  -D PIN_USER_BTN=38
 build_src_filter = ${esp32_base.build_src_filter}
+  +<../variants/lilygo_tbeam>
 board_build.partitions = min_spiffs.csv ; get around 4mb flash limit
+lib_deps =
+  ${esp32_base.lib_deps}
+  lewisxhe/XPowersLib@^0.2.7
+  adafruit/Adafruit SSD1306 @ ^2.5.13
 
 [env:Tbeam_companion_radio_ble]
 extends = LilyGo_TBeam
 board_build.upload.maximum_ram_size=2000000
 build_flags =
   ${LilyGo_TBeam.build_flags}
+  -D DISPLAY_CLASS=SSD1306Display
   -D MAX_CONTACTS=100
   -D MAX_GROUP_CHANNELS=1
   -D BLE_PIN_CODE=123456
@@ -29,8 +39,8 @@ build_flags =
 ;  -D MESH_DEBUG=1
 build_src_filter = ${LilyGo_TBeam.build_src_filter}
   +<helpers/esp32/*.cpp>
-  +<../examples/companion_radio/main.cpp>
+  +<helpers/ui/*.cpp>
+  +<../examples/companion_radio>
 lib_deps =
   ${LilyGo_TBeam.lib_deps}
-  densaugeo/base64 @ ~1.4.0
-  lewisxhe/XPowersLib@^0.2.7
+  densaugeo/base64 @ ~1.4.0

variants/lilygo_tbeam/target.cpp

@@ -0,0 +1,31 @@
+#include <Arduino.h>
+#include "target.h"
+
+TBeamBoard board;
+
+#if defined(P_LORA_SCLK)
+  static SPIClass spi;
+  RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, spi);
+#else
+  RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY);
+#endif
+
+#ifndef LORA_CR
+  #define LORA_CR      5
+#endif
+
+bool radio_init() {
+#if defined(P_LORA_SCLK)
+  spi.begin(P_LORA_SCLK, P_LORA_MISO, P_LORA_MOSI);
+#endif
+  int status = radio.begin(LORA_FREQ, LORA_BW, LORA_SF, LORA_CR, RADIOLIB_SX126X_SYNC_WORD_PRIVATE, LORA_TX_POWER, 8);
+  if (status != RADIOLIB_ERR_NONE) {
+    Serial.print("ERROR: radio init failed: ");
+    Serial.println(status);
+    return false;  // fail
+  }
+
+  radio.setCRC(1);
+  
+  return true;  // success
+}

variants/lilygo_tbeam/target.h

@@ -0,0 +1,9 @@
+#pragma once
+
+#include <helpers/TBeamBoard.h>
+#include <helpers/CustomSX1276Wrapper.h>
+
+extern TBeamBoard board;
+extern RADIO_CLASS radio;
+
+bool radio_init();

variants/lilygo_tlora_v2_1/platformio.ini

@@ -6,6 +6,7 @@ build_type = release  ; Set build type to release
 board_build.partitions = min_spiffs.csv ; get around 4mb flash limit
 build_flags =
   ${esp32_base.build_flags}
+  -I variants/lilygo_tlora_v2_1
   -Os -ffunction-sections -fdata-sections  ; Optimize for size
   -D LILYGO_TLORA  ; LILYGO T-LoRa V2.1-1.6 ESP32 with SX1276
   -D P_LORA_DIO_0=26    ; SX1276 DIO0 interrupt pin
@@ -23,6 +24,8 @@ build_flags =
   -D DISPLAY_CLASS=SSD1306Display
   -D WRAPPER_CLASS=CustomSX1276Wrapper
   -D LORA_TX_POWER=20
+build_src_filter = ${esp32_base.build_src_filter}
+  +<../variants/lilygo_tlora_v2_1>
 lib_deps =
   ${esp32_base.lib_deps}
   adafruit/Adafruit SSD1306 @ ^2.5.13
@@ -42,6 +45,9 @@ build_flags =
 ;  -D MESH_PACKET_LOGGING=1
 ;  -D MESH_DEBUG=1
 ;  -D CORE_DEBUG_LEVEL=3
+lib_deps =
+  ${LilyGo_TLora_V2_1_1_6.lib_deps}
+  ${esp32_ota.lib_deps}
 
 [env:LilyGo_TLora_V2_1_1_6_terminal_chat]
 extends = LilyGo_TLora_V2_1_1_6
@@ -109,3 +115,6 @@ build_flags =
   -D ROOM_PASSWORD='"hello"'
 ;  -D MESH_PACKET_LOGGING=1
 ;  -D MESH_DEBUG=1
+lib_deps =
+  ${LilyGo_TLora_V2_1_1_6.lib_deps}
+  ${esp32_ota.lib_deps}

variants/lilygo_tlora_v2_1/target.cpp

@@ -0,0 +1,25 @@
+#include <Arduino.h>
+#include "target.h"
+
+LilyGoTLoraBoard board;
+
+static SPIClass spi;
+RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_0, P_LORA_RESET, P_LORA_DIO_1, spi);
+
+#ifndef LORA_CR
+  #define LORA_CR      5
+#endif
+
+bool radio_init() {
+  spi.begin(P_LORA_SCLK, P_LORA_MISO, P_LORA_MOSI);
+  int status = radio.begin(LORA_FREQ, LORA_BW, LORA_SF, LORA_CR, RADIOLIB_SX126X_SYNC_WORD_PRIVATE, LORA_TX_POWER, 8);
+  if (status != RADIOLIB_ERR_NONE) {
+    Serial.print("ERROR: radio init failed: ");
+    Serial.println(status);
+    return false;  // fail
+  }
+
+  radio.setCRC(1);
+  
+  return true;  // success
+}

variants/lilygo_tlora_v2_1/target.h

@@ -0,0 +1,9 @@
+#pragma once
+
+#include <helpers/LilyGoTLoraBoard.h>
+#include <helpers/CustomSX1276Wrapper.h>
+
+extern LilyGoTLoraBoard board;
+extern RADIO_CLASS radio;
+
+bool radio_init();

variants/promicro/platformio.ini

@@ -1,18 +1,29 @@
 [faketec]
 extends = nrf52840_base
 board = promicro_nrf52840
-build_src_filter = ${nrf52840_base.build_src_filter}  +<helpers/nrf52/faketecBoard.cpp>
 build_flags = ${nrf52840_base.build_flags}
+  -I variants/promicro
   -D FAKETEC
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D LORA_TX_POWER=22
   -D SX126X_CURRENT_LIMIT=130
   -D SX126X_RX_BOOSTED_GAIN=1
+  -D DISPLAY_CLASS=SSD1306Display
+  -D PIN_BOARD_SCL=7
+  -D PIN_BOARD_SDA=8
+  -D PIN_OLED_RESET=-1
+  -D PIN_USER_BTN=6
+build_src_filter = ${nrf52840_base.build_src_filter}
+  +<helpers/nrf52/FaketecBoard.cpp>
+  +<../variants/promicro>
+lib_deps=
+  ${nrf52840_base.lib_deps}
+	adafruit/Adafruit SSD1306 @ ^2.5.13
 
 [env:Faketec_Repeater]
 extends = faketec
-build_src_filter = ${faketec.build_src_filter} +<../examples/simple_repeater/main.cpp>
+build_src_filter = ${faketec.build_src_filter} +<../examples/simple_repeater> +<helpers/ui/*.cpp>
 build_flags =
   ${faketec.build_flags}
   -D ADVERT_NAME="\"Faketec Repeater\""
@@ -27,7 +38,7 @@ lib_deps =
 
 [env:Faketec_room_server]
 extends = faketec
-build_src_filter = ${faketec.build_src_filter} +<../examples/simple_room_server/main.cpp>
+build_src_filter = ${faketec.build_src_filter} +<../examples/simple_room_server> +<helpers/ui/*.cpp>
 build_flags =
   ${faketec.build_flags}
   -D ADVERT_NAME="\"Test Room\""
@@ -63,7 +74,7 @@ build_flags =
   -D MAX_GROUP_CHANNELS=8
 ; NOTE: DO NOT ENABLE -->  -D MESH_PACKET_LOGGING=1
 ; NOTE: DO NOT ENABLE -->  -D MESH_DEBUG=1
-build_src_filter = ${faketec.build_src_filter} +<../examples/companion_radio/main.cpp>
+build_src_filter = ${faketec.build_src_filter} +<../examples/companion_radio>  +<../examples/companion_radio> +<helpers/ui/*.cpp>
 lib_deps =
   ${faketec.lib_deps}
   adafruit/RTClib @ ^2.1.3
@@ -81,7 +92,7 @@ build_flags =
   -D ENABLE_PRIVATE_KEY_IMPORT=1
 ;  -D MESH_PACKET_LOGGING=1
 ;  -D MESH_DEBUG=1
-build_src_filter = ${faketec.build_src_filter} +<helpers/nrf52/SerialBLEInterface.cpp> +<../examples/companion_radio/main.cpp>
+build_src_filter = ${faketec.build_src_filter} +<helpers/nrf52/SerialBLEInterface.cpp> +<../examples/companion_radio> +<helpers/ui/*.cpp>
 lib_deps =
   ${faketec.lib_deps}
   adafruit/RTClib @ ^2.1.3
@@ -90,14 +101,17 @@ lib_deps =
 [ProMicroLLCC68]
 extends = nrf52840_base
 board = promicro_nrf52840
-build_src_filter = ${nrf52840_base.build_src_filter}  +<helpers/nrf52/faketecBoard.cpp>
 build_flags = ${nrf52840_base.build_flags}
+  -I variants/promicro
   -D FAKETEC
   -D RADIO_CLASS=CustomLLCC68 
   -D WRAPPER_CLASS=CustomLLCC68Wrapper
   -D LORA_TX_POWER=22
   -D SX126X_CURRENT_LIMIT=130
   -D SX126X_RX_BOOSTED_GAIN=1
+build_src_filter = ${nrf52840_base.build_src_filter}
+  +<helpers/nrf52/FaketecBoard.cpp>
+  +<../variants/promicro>
 
 [env:ProMicroLLCC68_Repeater]
 extends = ProMicroLLCC68

variants/promicro/target.cpp

@@ -0,0 +1,46 @@
+#include <Arduino.h>
+#include "target.h"
+
+FaketecBoard board;
+
+RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, SPI);
+
+#ifndef LORA_CR
+  #define LORA_CR      5
+#endif
+
+bool radio_init() {
+#ifdef SX126X_DIO3_TCXO_VOLTAGE
+  float tcxo = SX126X_DIO3_TCXO_VOLTAGE;
+#else
+  float tcxo = 1.6f;
+#endif
+
+  SPI.setPins(P_LORA_MISO, P_LORA_SCLK, P_LORA_MOSI);
+  SPI.begin();
+  int status = radio.begin(LORA_FREQ, LORA_BW, LORA_SF, LORA_CR, RADIOLIB_SX126X_SYNC_WORD_PRIVATE, LORA_TX_POWER, 8, tcxo);
+  if (status == RADIOLIB_ERR_SPI_CMD_FAILED || status == RADIOLIB_ERR_SPI_CMD_INVALID) {
+    #define SX126X_DIO3_TCXO_VOLTAGE (0.0f);
+    tcxo = SX126X_DIO3_TCXO_VOLTAGE;
+    status = radio.begin(LORA_FREQ, LORA_BW, LORA_SF, LORA_CR, RADIOLIB_SX126X_SYNC_WORD_PRIVATE, LORA_TX_POWER, 8, tcxo);
+  }
+  if (status != RADIOLIB_ERR_NONE) {
+    Serial.print("ERROR: radio init failed: ");
+    Serial.println(status);
+    return false;  // fail
+  }
+  
+  radio.setCRC(1);
+  
+#ifdef SX126X_CURRENT_LIMIT
+  radio.setCurrentLimit(SX126X_CURRENT_LIMIT);
+#endif
+#ifdef SX126X_DIO2_AS_RF_SWITCH
+  radio.setDio2AsRfSwitch(SX126X_DIO2_AS_RF_SWITCH);
+#endif
+#ifdef SX126X_RX_BOOSTED_GAIN
+  radio.setRxBoostedGainMode(SX126X_RX_BOOSTED_GAIN);
+#endif
+
+  return true;  // success
+}

variants/promicro/target.h

@@ -0,0 +1,10 @@
+#pragma once
+
+#include <helpers/nrf52/FaketecBoard.h>
+#include <helpers/CustomSX1262Wrapper.h>
+#include <helpers/CustomLLCC68Wrapper.h>
+
+extern FaketecBoard board;
+extern RADIO_CLASS radio;
+
+bool radio_init();

variants/rak4631/platformio.ini

@@ -4,6 +4,7 @@ platform = https://github.com/maxgerhardt/platform-nordicnrf52.git#rak
 board = wiscore_rak4631
 board_check = true
 build_flags = ${nrf52840_base.build_flags}
+  -I variants/rak4631
   -D RAK_4631
   -D PIN_USER_BTN=9
   -D RADIO_CLASS=CustomSX1262
@@ -13,6 +14,7 @@ build_flags = ${nrf52840_base.build_flags}
   -D SX126X_RX_BOOSTED_GAIN=1
 build_src_filter = ${nrf52840_base.build_src_filter}
   +<helpers/nrf52/*.cpp>
+  +<../variants/rak4631>
 lib_deps =
   ${nrf52840_base.lib_deps}
   adafruit/Adafruit SSD1306 @ ^2.5.13

variants/rak4631/target.cpp

@@ -0,0 +1,41 @@
+#include <Arduino.h>
+#include "target.h"
+
+RAK4631Board board;
+
+RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, SPI);
+
+#ifndef LORA_CR
+  #define LORA_CR      5
+#endif
+
+bool radio_init() {
+#ifdef SX126X_DIO3_TCXO_VOLTAGE
+  float tcxo = SX126X_DIO3_TCXO_VOLTAGE;
+#else
+  float tcxo = 1.6f;
+#endif
+
+  SPI.setPins(P_LORA_MISO, P_LORA_SCLK, P_LORA_MOSI);
+  SPI.begin();
+  int status = radio.begin(LORA_FREQ, LORA_BW, LORA_SF, LORA_CR, RADIOLIB_SX126X_SYNC_WORD_PRIVATE, LORA_TX_POWER, 8, tcxo);
+  if (status != RADIOLIB_ERR_NONE) {
+    Serial.print("ERROR: radio init failed: ");
+    Serial.println(status);
+    return false;  // fail
+  }
+  
+  radio.setCRC(1);
+  
+#ifdef SX126X_CURRENT_LIMIT
+  radio.setCurrentLimit(SX126X_CURRENT_LIMIT);
+#endif
+#ifdef SX126X_DIO2_AS_RF_SWITCH
+  radio.setDio2AsRfSwitch(SX126X_DIO2_AS_RF_SWITCH);
+#endif
+#ifdef SX126X_RX_BOOSTED_GAIN
+  radio.setRxBoostedGainMode(SX126X_RX_BOOSTED_GAIN);
+#endif
+
+  return true;  // success
+}

variants/rak4631/target.h

@@ -0,0 +1,9 @@
+#pragma once
+
+#include <helpers/nrf52/RAK4631Board.h>
+#include <helpers/CustomSX1262Wrapper.h>
+
+extern RAK4631Board board;
+extern RADIO_CLASS radio;
+
+bool radio_init();

variants/station_g2/platformio.ini

@@ -3,6 +3,7 @@ extends = esp32_base
 board = station-g2
 build_flags =
   ${esp32_base.build_flags}
+  -I variants/station_g2
   -D STATION_G2
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
@@ -16,8 +17,8 @@ build_flags =
   -D SX126X_CURRENT_LIMIT=130.0f  ; for best TX power!
 ;  -D SX126X_RX_BOOSTED_GAIN=1 - DO NOT ENABLE THIS!
 ;  https://wiki.uniteng.com/en/meshtastic/station-g2#impact-of-lora-node-dense-areashigh-noise-environments-on-rf-performance
-
 build_src_filter = ${esp32_base.build_src_filter}
+  +<../variants/station_g2>
 lib_deps =
   ${esp32_base.lib_deps}
 
@@ -33,6 +34,9 @@ build_flags =
 ;  -D MESH_DEBUG=1
 build_src_filter = ${Station_G2.build_src_filter}
   +<../examples/simple_repeater>
+lib_deps =
+  ${Station_G2.lib_deps}
+  ${esp32_ota.lib_deps}
 
 [env:Station_G2_room_server]
 extends = Station_G2
@@ -47,3 +51,6 @@ build_flags =
   -D ROOM_PASSWORD='"hello"'
 ;  -D MESH_PACKET_LOGGING=1
 ;  -D MESH_DEBUG=1
+lib_deps =
+  ${Station_G2.lib_deps}
+  ${esp32_ota.lib_deps}

variants/station_g2/target.cpp

@@ -0,0 +1,47 @@
+#include <Arduino.h>
+#include "target.h"
+
+StationG2Board board;
+
+#if defined(P_LORA_SCLK)
+  static SPIClass spi;
+  RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, spi);
+#else
+  RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY);
+#endif
+
+#ifndef LORA_CR
+  #define LORA_CR      5
+#endif
+
+bool radio_init() {
+#ifdef SX126X_DIO3_TCXO_VOLTAGE
+  float tcxo = SX126X_DIO3_TCXO_VOLTAGE;
+#else
+  float tcxo = 1.6f;
+#endif
+
+#if defined(P_LORA_SCLK)
+  spi.begin(P_LORA_SCLK, P_LORA_MISO, P_LORA_MOSI);
+#endif
+  int status = radio.begin(LORA_FREQ, LORA_BW, LORA_SF, LORA_CR, RADIOLIB_SX126X_SYNC_WORD_PRIVATE, LORA_TX_POWER, 8, tcxo);
+  if (status != RADIOLIB_ERR_NONE) {
+    Serial.print("ERROR: radio init failed: ");
+    Serial.println(status);
+    return false;  // fail
+  }
+  
+  radio.setCRC(1);
+  
+#ifdef SX126X_CURRENT_LIMIT
+  radio.setCurrentLimit(SX126X_CURRENT_LIMIT);
+#endif
+#ifdef SX126X_DIO2_AS_RF_SWITCH
+  radio.setDio2AsRfSwitch(SX126X_DIO2_AS_RF_SWITCH);
+#endif
+#ifdef SX126X_RX_BOOSTED_GAIN
+  radio.setRxBoostedGainMode(SX126X_RX_BOOSTED_GAIN);
+#endif
+
+  return true;  // success
+}

variants/station_g2/target.h

@@ -0,0 +1,9 @@
+#pragma once
+
+#include <helpers/StationG2Board.h>
+#include <helpers/CustomSX1262Wrapper.h>
+
+extern StationG2Board board;
+extern RADIO_CLASS radio;
+
+bool radio_init();

variants/t1000-e/platformio.ini

@@ -19,14 +19,14 @@ extends = nrf52840_t1000e
 board = tracker-t1000-e
 board_build.ldscript = boards/nrf52840_s140_v7.ld
 build_flags = ${nrf52840_t1000e.build_flags}
-  -Ivariants/t1000-e
+  -I variants/t1000-e
   -D T1000_E
   -D PIN_USER_BTN=6
   -D USER_BTN_PRESSED=HIGH
   -D PIN_STATUS_LED=24
   -D RADIO_CLASS=CustomLR1110
   -D WRAPPER_CLASS=CustomLR1110Wrapper
-  -D MAX_LORA_TX_POWER=22
+  -D LORA_TX_POWER=22
 build_src_filter = ${nrf52840_t1000e.build_src_filter}
   +<helpers/*.cpp>
   +<helpers/nrf52/T1000eBoard.cpp>
@@ -43,6 +43,8 @@ build_flags = ${t1000-e.build_flags}
   -D BLE_DEBUG_LOGGING=1
   -D MESH_PACKET_LOGGING=1
   -D MESH_DEBUG=1
+  -D RX_BOOSTED_GAIN=true
+  -D RF_SWITCH_TABLE
   -D HAS_UI
 build_src_filter = ${t1000-e.build_src_filter}
   +<helpers/nrf52/SerialBLEInterface.cpp>

variants/t1000-e/target.cpp

@@ -0,0 +1,60 @@
+#include <Arduino.h>
+#include "target.h"
+
+T1000eBoard board;
+
+RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, SPI);
+
+#ifndef LORA_CR
+  #define LORA_CR      5
+#endif
+
+#ifdef RF_SWITCH_TABLE
+static const uint32_t rfswitch_dios[Module::RFSWITCH_MAX_PINS] = {
+  RADIOLIB_LR11X0_DIO5,
+  RADIOLIB_LR11X0_DIO6,
+  RADIOLIB_LR11X0_DIO7,
+  RADIOLIB_LR11X0_DIO8, 
+  RADIOLIB_NC
+};
+
+static const Module::RfSwitchMode_t rfswitch_table[] = {
+  // mode                 DIO5  DIO6  DIO7  DIO8
+  { LR11x0::MODE_STBY,   {LOW,  LOW,  LOW,  LOW  }},  
+  { LR11x0::MODE_RX,     {HIGH, LOW,  LOW,  HIGH }},
+  { LR11x0::MODE_TX,     {HIGH, HIGH, LOW,  HIGH }},
+  { LR11x0::MODE_TX_HP,  {LOW,  HIGH, LOW,  HIGH }},
+  { LR11x0::MODE_TX_HF,  {LOW,  LOW,  LOW,  LOW  }}, 
+  { LR11x0::MODE_GNSS,   {LOW,  LOW,  HIGH, LOW  }},
+  { LR11x0::MODE_WIFI,   {LOW,  LOW,  LOW,  LOW  }},  
+  END_OF_MODE_TABLE,
+};
+#endif
+
+bool radio_init() {
+#ifdef LR11X0_DIO3_TCXO_VOLTAGE
+  float tcxo = LR11X0_DIO3_TCXO_VOLTAGE;
+#else
+  float tcxo = 1.6f;
+#endif
+
+  SPI.setPins(P_LORA_MISO, P_LORA_SCLK, P_LORA_MOSI);
+  SPI.begin();
+  int status = radio.begin(LORA_FREQ, LORA_BW, LORA_SF, LORA_CR, RADIOLIB_LR11X0_LORA_SYNC_WORD_PRIVATE, LORA_TX_POWER, 8, tcxo);
+  if (status != RADIOLIB_ERR_NONE) {
+    Serial.print("ERROR: radio init failed: ");
+    Serial.println(status);
+    return false;  // fail
+  }
+  
+  radio.setCRC(1);
+
+#ifdef RF_SWITCH_TABLE
+  radio.setRfSwitchTable(rfswitch_dios, rfswitch_table);
+#endif
+#ifdef RX_BOOSTED_GAIN
+  radio.setRxBoostedGainMode(RX_BOOSTED_GAIN);
+#endif
+
+  return true;  // success
+}

variants/t1000-e/target.h

@@ -0,0 +1,9 @@
+#pragma once
+
+#include <helpers/nrf52/T1000eBoard.h>
+#include <helpers/CustomLR1110Wrapper.h>
+
+extern T1000eBoard board;
+extern RADIO_CLASS radio;
+
+bool radio_init();

variants/t114/platformio.ini

@@ -14,7 +14,7 @@ extends = nrf52840_t114
 board = heltec_t114
 board_build.ldscript = boards/nrf52840_s140_v6.ld
 build_flags = ${nrf52840_t114.build_flags}
-  -Ivariants/t114
+  -I variants/t114
   -DHELTEC_T114
   -D P_LORA_TX_LED=35
   -D RADIO_CLASS=CustomSX1262

variants/t114/target.cpp

@@ -0,0 +1,41 @@
+#include <Arduino.h>
+#include "target.h"
+
+T114Board board;
+
+RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, SPI);
+
+#ifndef LORA_CR
+  #define LORA_CR      5
+#endif
+
+bool radio_init() {
+#ifdef SX126X_DIO3_TCXO_VOLTAGE
+  float tcxo = SX126X_DIO3_TCXO_VOLTAGE;
+#else
+  float tcxo = 1.6f;
+#endif
+
+  SPI.setPins(P_LORA_MISO, P_LORA_SCLK, P_LORA_MOSI);
+  SPI.begin();
+  int status = radio.begin(LORA_FREQ, LORA_BW, LORA_SF, LORA_CR, RADIOLIB_SX126X_SYNC_WORD_PRIVATE, LORA_TX_POWER, 8, tcxo);
+  if (status != RADIOLIB_ERR_NONE) {
+    Serial.print("ERROR: radio init failed: ");
+    Serial.println(status);
+    return false;  // fail
+  }
+  
+  radio.setCRC(1);
+  
+#ifdef SX126X_CURRENT_LIMIT
+  radio.setCurrentLimit(SX126X_CURRENT_LIMIT);
+#endif
+#ifdef SX126X_DIO2_AS_RF_SWITCH
+  radio.setDio2AsRfSwitch(SX126X_DIO2_AS_RF_SWITCH);
+#endif
+#ifdef SX126X_RX_BOOSTED_GAIN
+  radio.setRxBoostedGainMode(SX126X_RX_BOOSTED_GAIN);
+#endif
+
+  return true;  // success
+}

variants/t114/target.h

@@ -0,0 +1,9 @@
+#pragma once
+
+#include <helpers/nrf52/T114Board.h>
+#include <helpers/CustomSX1262Wrapper.h>
+
+extern T114Board board;
+extern RADIO_CLASS radio;
+
+bool radio_init();

variants/techo/platformio.ini

@@ -14,7 +14,7 @@ extends = nrf52840_techo
 board = t-echo
 board_build.ldscript = boards/nrf52840_s140_v6.ld
 build_flags = ${nrf52840_techo.build_flags}
-  -Ivariants/techo
+  -I variants/techo
   -DLILYGO_TECHO
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper

variants/techo/target.cpp

@@ -0,0 +1,41 @@
+#include <Arduino.h>
+#include "target.h"
+
+TechoBoard board;
+
+RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, SPI);
+
+#ifndef LORA_CR
+  #define LORA_CR      5
+#endif
+
+bool radio_init() {
+#ifdef SX126X_DIO3_TCXO_VOLTAGE
+  float tcxo = SX126X_DIO3_TCXO_VOLTAGE;
+#else
+  float tcxo = 1.6f;
+#endif
+
+  SPI.setPins(P_LORA_MISO, P_LORA_SCLK, P_LORA_MOSI);
+  SPI.begin();
+  int status = radio.begin(LORA_FREQ, LORA_BW, LORA_SF, LORA_CR, RADIOLIB_SX126X_SYNC_WORD_PRIVATE, LORA_TX_POWER, 8, tcxo);
+  if (status != RADIOLIB_ERR_NONE) {
+    Serial.print("ERROR: radio init failed: ");
+    Serial.println(status);
+    return false;  // fail
+  }
+  
+  radio.setCRC(1);
+  
+#ifdef SX126X_CURRENT_LIMIT
+  radio.setCurrentLimit(SX126X_CURRENT_LIMIT);
+#endif
+#ifdef SX126X_DIO2_AS_RF_SWITCH
+  radio.setDio2AsRfSwitch(SX126X_DIO2_AS_RF_SWITCH);
+#endif
+#ifdef SX126X_RX_BOOSTED_GAIN
+  radio.setRxBoostedGainMode(SX126X_RX_BOOSTED_GAIN);
+#endif
+
+  return true;  // success
+}

variants/techo/target.h

@@ -0,0 +1,9 @@
+#pragma once
+
+#include <helpers/nrf52/TechoBoard.h>
+#include <helpers/CustomSX1262Wrapper.h>
+
+extern TechoBoard board;
+extern RADIO_CLASS radio;
+
+bool radio_init();

variants/techo/variant.h

@@ -14,12 +14,12 @@
 #define USE_LFXO    // 32.768 kHz crystal oscillator
 #define VARIANT_MCK (64000000ul)
 
-#define WIRE_INTERFACES_COUNT 	(1)
-
+#define WIRE_INTERFACES_COUNT   (1)
+#define PIN_TXCO                (21)
 ////////////////////////////////////////////////////////////////////////////////
 // Power
 
-#define PIN_PWR_EN              (6)
+#define PIN_PWR_EN              (12)
 
 #define BATTERY_PIN             (4)
 #define ADC_MULTIPLIER          (4.90F)
@@ -62,11 +62,11 @@
 ////////////////////////////////////////////////////////////////////////////////
 // Builtin LEDs
 
-#define LED_RED                 (13)
+#define LED_RED                 (34)
+#define LED_GREEN               (33)
 #define LED_BLUE                (14)
-#define LED_GREEN               (15)
 
-#define LED_BUILTIN             (15)
+#define LED_BUILTIN             LED_GREEN
 #define PIN_LED                 LED_BUILTIN
 #define LED_PIN                 LED_BUILTIN
 #define LED_STATE_ON            LOW
@@ -80,7 +80,7 @@
 #define PIN_BUTTON1             (42)
 #define BUTTON_PIN              PIN_BUTTON1
 
-#define PIN_BUTTON2             (18)
+#define PIN_BUTTON2             (11)
 #define BUTTON_PIN2             PIN_BUTTON2
 
 #define EXTERNAL_FLASH_DEVICES MX25R1635F

variants/xiao_c3/platformio.ini

@@ -3,6 +3,7 @@ extends = esp32_base
 board = seeed_xiao_esp32c3
 build_flags =
   ${esp32_base.build_flags}
+  -I variants/xiao_c3
   -D LORA_TX_BOOST_PIN=D3
   -D P_LORA_TX_LED=D5
   -D PIN_VBAT_READ=D0
@@ -15,6 +16,8 @@ build_flags =
   -D SX126X_DIO2_AS_RF_SWITCH=true
   -D SX126X_DIO3_TCXO_VOLTAGE=1.8
   -D SX126X_CURRENT_LIMIT=130.0f  ; for best TX power!
+build_src_filter = ${esp32_base.build_src_filter}
+  +<../variants/xiao_c3>
 
 [env:Xiao_C3_Repeater_sx1262]
 extends = Xiao_esp32_C3
@@ -32,6 +35,9 @@ build_flags =
   -D ADMIN_PASSWORD='"password"'
 ;  -D MESH_PACKET_LOGGING=1
 ;  -D MESH_DEBUG=1
+lib_deps =
+  ${Xiao_esp32_C3.lib_deps}
+  ${esp32_ota.lib_deps}
 
 [env:Xiao_C3_Repeater_sx1268]
 extends = Xiao_esp32_C3
@@ -48,3 +54,6 @@ build_flags =
   -D ADMIN_PASSWORD='"password"'
  ; -D MESH_PACKET_LOGGING=1
  ; -D MESH_DEBUG=1
+lib_deps =
+  ${Xiao_esp32_C3.lib_deps}
+  ${esp32_ota.lib_deps}

variants/xiao_c3/target.cpp

@@ -0,0 +1,47 @@
+#include <Arduino.h>
+#include "target.h"
+
+XiaoC3Board board;
+
+#if defined(P_LORA_SCLK)
+  static SPIClass spi;
+  RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, spi);
+#else
+  RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY);
+#endif
+
+#ifndef LORA_CR
+  #define LORA_CR      5
+#endif
+
+bool radio_init() {
+#ifdef SX126X_DIO3_TCXO_VOLTAGE
+  float tcxo = SX126X_DIO3_TCXO_VOLTAGE;
+#else
+  float tcxo = 1.6f;
+#endif
+
+#if defined(P_LORA_SCLK)
+  spi.begin(P_LORA_SCLK, P_LORA_MISO, P_LORA_MOSI);
+#endif
+  int status = radio.begin(LORA_FREQ, LORA_BW, LORA_SF, LORA_CR, RADIOLIB_SX126X_SYNC_WORD_PRIVATE, LORA_TX_POWER, 8, tcxo);
+  if (status != RADIOLIB_ERR_NONE) {
+    Serial.print("ERROR: radio init failed: ");
+    Serial.println(status);
+    return false;  // fail
+  }
+  
+  radio.setCRC(1);
+  
+#ifdef SX126X_CURRENT_LIMIT
+  radio.setCurrentLimit(SX126X_CURRENT_LIMIT);
+#endif
+#ifdef SX126X_DIO2_AS_RF_SWITCH
+  radio.setDio2AsRfSwitch(SX126X_DIO2_AS_RF_SWITCH);
+#endif
+#ifdef SX126X_RX_BOOSTED_GAIN
+  radio.setRxBoostedGainMode(SX126X_RX_BOOSTED_GAIN);
+#endif
+
+  return true;  // success
+}

variants/xiao_c3/target.h

@@ -0,0 +1,10 @@
+#pragma once
+
+#include <helpers/XiaoC3Board.h>
+#include <helpers/CustomSX1262Wrapper.h>
+#include <helpers/CustomSX1268Wrapper.h>
+
+extern XiaoC3Board board;
+extern RADIO_CLASS radio;
+
+bool radio_init();

variants/xiao_s3_wio/platformio.ini

@@ -4,6 +4,7 @@ board = seeed_xiao_esp32s3
 board_check = true
 board_build.mcu = esp32s3
 build_flags = ${esp32_base.build_flags}
+  -I variants/xiao_s3_wio
   -D SEEED_XIAO_S3
   -D P_LORA_DIO_1=39
   -D P_LORA_NSS=41
@@ -19,6 +20,8 @@ build_flags = ${esp32_base.build_flags}
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D LORA_TX_POWER=22
   -D SX126X_RX_BOOSTED_GAIN=1
+build_src_filter = ${esp32_base.build_src_filter}
+  +<../variants/xiao_s3_wio>
 
 [env:Xiao_S3_WIO_Repeater]
 extends = Xiao_S3_WIO
@@ -32,6 +35,26 @@ build_flags =
   -D ADMIN_PASSWORD='"password"'
 ;  -D MESH_PACKET_LOGGING=1
 ;  -D MESH_DEBUG=1
+lib_deps =
+  ${Xiao_S3_WIO.lib_deps}
+  ${esp32_ota.lib_deps}
+
+[env:Xiao_S3_WIO_room_server]
+extends = Xiao_S3_WIO
+build_src_filter = ${Xiao_S3_WIO.build_src_filter}
+  +<../examples/simple_room_server>
+build_flags =
+  ${Xiao_S3_WIO.build_flags}
+  -D ADVERT_NAME='"XiaoS3 Room"'
+  -D ADVERT_LAT=-37.0
+  -D ADVERT_LON=145.0
+  -D ADMIN_PASSWORD='"password"'
+  -D ROOM_PASSWORD='"hello"'
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+lib_deps =
+  ${Xiao_S3_WIO.lib_deps}
+  ${esp32_ota.lib_deps}
 
 [env:Xiao_S3_WIO_terminal_chat]
 extends = Xiao_S3_WIO

variants/xiao_s3_wio/target.cpp

@@ -0,0 +1,47 @@
+#include <Arduino.h>
+#include "target.h"
+
+ESP32Board board;
+
+#if defined(P_LORA_SCLK)
+  static SPIClass spi;
+  RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, spi);
+#else
+  RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY);
+#endif
+
+#ifndef LORA_CR
+  #define LORA_CR      5
+#endif
+
+bool radio_init() {
+#ifdef SX126X_DIO3_TCXO_VOLTAGE
+  float tcxo = SX126X_DIO3_TCXO_VOLTAGE;
+#else
+  float tcxo = 1.6f;
+#endif
+
+#if defined(P_LORA_SCLK)
+  spi.begin(P_LORA_SCLK, P_LORA_MISO, P_LORA_MOSI);
+#endif
+  int status = radio.begin(LORA_FREQ, LORA_BW, LORA_SF, LORA_CR, RADIOLIB_SX126X_SYNC_WORD_PRIVATE, LORA_TX_POWER, 8, tcxo);
+  if (status != RADIOLIB_ERR_NONE) {
+    Serial.print("ERROR: radio init failed: ");
+    Serial.println(status);
+    return false;  // fail
+  }
+  
+  radio.setCRC(1);
+  
+#ifdef SX126X_CURRENT_LIMIT
+  radio.setCurrentLimit(SX126X_CURRENT_LIMIT);
+#endif
+#ifdef SX126X_DIO2_AS_RF_SWITCH
+  radio.setDio2AsRfSwitch(SX126X_DIO2_AS_RF_SWITCH);
+#endif
+#ifdef SX126X_RX_BOOSTED_GAIN
+  radio.setRxBoostedGainMode(SX126X_RX_BOOSTED_GAIN);
+#endif
+
+  return true;  // success
+}

variants/xiao_s3_wio/target.h

@@ -0,0 +1,9 @@
+#pragma once
+
+#include <helpers/ESP32Board.h>
+#include <helpers/CustomSX1262Wrapper.h>
+
+extern ESP32Board board;
+extern RADIO_CLASS radio;
+
+bool radio_init();