* timing fixes (courtesy of Taco)

* super fast ST7735 display driver
stop tracking vscode extensions.json
2026-07-09 08:51:38 +00:00 · 2026-07-07 13:54:14 +10:00 · 2026-07-06 15:09:18 +10:00 · 2026-07-05 12:23:22 +12:00 · 2026-07-04 12:35:03 +10:00 · 2026-07-03 12:40:22 +12:00
78 changed files with 1840 additions and 230 deletions
@@ -1,9 +0,0 @@
-{
-    "recommendations": [
-        "pioarduino.pioarduino-ide",
-        "platformio.platformio-ide"
-    ],
-    "unwantedRecommendations": [
-        "ms-vscode.cpptools-extension-pack"
-    ]
-}
@@ -0,0 +1,61 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A","0x4405"],
+      ["0x239A","0x0029"],
+      ["0x239A","0x002A"],
+      ["0x239A","0x0071"]
+    ],
+    "usb_product": "HT-n5262",
+    "mcu": "nrf52840",
+    "variant": "heltec_tower_v2",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": [
+    "bluetooth"
+  ],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52.cfg"
+  },
+  "frameworks": [
+    "arduino"
+  ],
+  "name": "Heltec Tower V2 Board",
+  "upload": {
+    "maximum_ram_size": 235520,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink"
+    ],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://heltec.org/",
+  "vendor": "Heltec"
+}
@@ -1,11 +1,12 @@
-{ pkgs ? import <nixpkgs> {} }:
-let
+{pkgs ? import <nixpkgs> {}}: let
 in
  pkgs.mkShell {
    buildInputs = [
      pkgs.platformio
      pkgs.python3
+      pkgs.gcc
+      pkgs.gtest
      # optional: needed as a programmer i.e. for esp32
      pkgs.avrdude
    ];
-}
+  }
@@ -263,6 +263,20 @@ This document provides an overview of CLI commands that can be sent to MeshCore

 ---

+#### View or change the LoRa FEM receive-path gain state on supported boards
+**Usage:**
+- `get radio.fem.rxgain`
+- `set radio.fem.rxgain <state>`
+
+**Parameters:**
+- `state`: `on`|`off`
+
+**Notes:**
+- This controls the external LoRa FEM receive-path LNA where the board supports it.
+- This is separate from `radio.rxgain`, which controls the radio chip receive gain mode.
+
+---
+
 ### System

 #### View or change this node's name
@@ -564,6 +578,20 @@ This document provides an overview of CLI commands that can be sent to MeshCore

 ---

+#### Enable or disable hardware Channel Activity Detection (CAD)
+**Usage:**
+- `get cad`
+- `set cad <on|off>`
+
+**Description:** When enabled, the radio performs a hardware Channel Activity Detection scan before transmitting and defers if the channel is busy. Runs independently of `int.thresh` — either, both, or none may be active.
+
+**Parameters:**
+- `on|off`: Enable or disable hardware CAD
+
+**Default:** `off`
+
+---
+
 #### View or change the AGC Reset Interval
 **Usage:**
 - `get agc.reset.interval`
@@ -17,6 +17,7 @@ Once you have a working app/project, you need to be able to demonstrate it exist
 | 0000 - 00FF     | -reserved for internal use- |                                                                   |
 | 0100            | MeshCore Open               | zsylvester@monitormx.com — https://github.com/zjs81/meshcore-open |
 | 0110 - 011F     | Ripple                      | ripple_biz@protonmail.com — https://buymeacoffee.com/ripplebiz    |
+| 0120            | MCO Advanced                | most.original.address@gmail.com — https://hdden.ru/MCOa/          |
 | FF00 - FFFF     | -reserved for testing/dev-  |                                                                   |

 (add rows, inside the range 0100 - FEFF for custom apps)
@@ -545,7 +545,7 @@ bool DataStore::putBlobByKey(const uint8_t key[], int key_len, const uint8_t src
    uint32_t pos = 0, found_pos = 0;
    uint32_t min_timestamp = 0xFFFFFFFF;

-    // search for matching key OR evict by oldest timestmap
+    // search for matching key OR evict by oldest timestamp
    BlobRec tmp;
    file.seek(0);
    while (file.read((uint8_t *) &tmp, sizeof(tmp)) == sizeof(tmp)) {
@@ -261,6 +261,9 @@ float MyMesh::getAirtimeBudgetFactor() const {
 int MyMesh::getInterferenceThreshold() const {
  return 0; // disabled for now, until currentRSSI() problem is resolved
 }
+bool MyMesh::getCADEnabled() const {
+  return true; // hardware CAD before TX (no CLI toggle on companion; enabled by default)
+}

 int MyMesh::calcRxDelay(float score, uint32_t air_time) const {
  if (_prefs.rx_delay_base <= 0.0f) return 0;
@@ -854,7 +857,7 @@ void MyMesh::onSendTimeout() {}

 MyMesh::MyMesh(mesh::Radio &radio, mesh::RNG &rng, mesh::RTCClock &rtc, SimpleMeshTables &tables, DataStore& store, AbstractUITask* ui)
    : BaseChatMesh(radio, *new ArduinoMillis(), rng, rtc, *new StaticPoolPacketManager(16), tables),
-      _serial(NULL), telemetry(MAX_PACKET_PAYLOAD - 4), _store(&store), _ui(ui) {
+      _serial(NULL), telemetry(MAX_PACKET_PAYLOAD - 4), _store(&store), _ui(ui), _iter(0) {
  _iter_started = false;
  _cli_rescue = false;
  offline_queue_len = 0;
@@ -1542,6 +1545,7 @@ void MyMesh::handleCmdFrame(size_t len) {
      memcpy(anon.id.pub_key, pub_key, PUB_KEY_SIZE);
      anon.out_path_len = 0;   // default to zero-hop direct
      anon.type = ADV_TYPE_NONE;  // unknown
+      anon.lastmod = getRTCClock()->getCurrentTime();

      if (addContact(anon)) recipient = &anon;
    }
@@ -1981,6 +1985,7 @@ void MyMesh::handleCmdFrame(size_t len) {
        sendPacket(pkt, priority, 0);
        writeOKFrame();
      } else {
+        releasePacket(pkt);
        writeErrFrame(ERR_CODE_ILLEGAL_ARG);
      }
    } else {
@@ -2186,15 +2191,7 @@ void MyMesh::checkSerialInterface() {
             && !_serial->isWriteBusy() // don't spam the Serial Interface too quickly!
  ) {
    ContactInfo contact;
-    bool found = false;
-    while (_iter.hasNext(this, contact)) {
-      if (contact.type != ADV_TYPE_NONE) {
-        found = true;
-        break;
-      }
-    }
-
-    if (found) {
+    if (_iter.hasNext(this, contact)) {
      if (contact.lastmod > _iter_filter_since) { // apply the 'since' filter
        writeContactRespFrame(RESP_CODE_CONTACT, contact);
        if (contact.lastmod > _most_recent_lastmod) {
@@ -105,6 +105,7 @@ public:
 protected:
  float getAirtimeBudgetFactor() const override;
  int getInterferenceThreshold() const override;
+  bool getCADEnabled() const override;
  int calcRxDelay(float score, uint32_t air_time) const override;
  uint32_t getRetransmitDelay(const mesh::Packet *packet) override;
  uint32_t getDirectRetransmitDelay(const mesh::Packet *packet) override;
@@ -549,8 +549,7 @@ uint32_t MyMesh::getDirectRetransmitDelay(const mesh::Packet *packet) {
  return getRNG()->nextInt(0, 5*t + 1);
 }

-bool MyMesh::filterRecvFloodPacket(mesh::Packet* pkt) {
-  // just try to determine region for packet (apply later in allowPacketForward())
+mesh::DispatcherAction MyMesh::onRecvPacket(mesh::Packet* pkt) {
  if (pkt->getRouteType() == ROUTE_TYPE_TRANSPORT_FLOOD) {
    recv_pkt_region = region_map.findMatch(pkt, REGION_DENY_FLOOD);
  } else if (pkt->getRouteType() == ROUTE_TYPE_FLOOD) {
@@ -562,8 +561,7 @@ bool MyMesh::filterRecvFloodPacket(mesh::Packet* pkt) {
  } else {
    recv_pkt_region = NULL;
  }
-  // do normal processing
-  return false;
+  return Mesh::onRecvPacket(pkt);
 }

 void MyMesh::onAnonDataRecv(mesh::Packet *packet, const uint8_t *secret, const mesh::Identity &sender,
@@ -867,6 +865,7 @@ MyMesh::MyMesh(mesh::MainBoard &board, mesh::Radio &radio, mesh::MillisecondCloc
  set_radio_at = revert_radio_at = 0;
  _logging = false;
  region_load_active = false;
+  recv_pkt_region = NULL;

 #if MAX_NEIGHBOURS
  memset(neighbours, 0, sizeof(neighbours));
@@ -893,6 +892,7 @@ MyMesh::MyMesh(mesh::MainBoard &board, mesh::Radio &radio, mesh::MillisecondCloc
  _prefs.flood_max_unscoped = 64;
  _prefs.flood_max_advert = 8;
  _prefs.interference_threshold = 0; // disabled
+  _prefs.cad_enabled = 0;            // hardware CAD before TX (off by default; 'set cad on')

  // bridge defaults
  _prefs.bridge_enabled = 1;    // enabled
@@ -917,6 +917,7 @@ MyMesh::MyMesh(mesh::MainBoard &board, mesh::Radio &radio, mesh::MillisecondCloc
  _prefs.rx_boosted_gain = 1; // enabled by default;
 #endif
 #endif
+  _prefs.radio_fem_rxgain = 1;

  pending_discover_tag = 0;
  pending_discover_until = 0;
@@ -965,6 +966,7 @@ void MyMesh::begin(FILESYSTEM *fs) {
  radio_driver.setRxBoostedGainMode(_prefs.rx_boosted_gain);
  MESH_DEBUG_PRINTLN("RX Boosted Gain Mode: %s",
                     radio_driver.getRxBoostedGainMode() ? "Enabled" : "Disabled");
+  board.setLoRaFemLnaEnabled(_prefs.radio_fem_rxgain);

  updateAdvertTimer();
  updateFloodAdvertTimer();
@@ -1059,11 +1061,9 @@ void MyMesh::setTxPower(int8_t power_dbm) {
  radio_driver.setTxPower(power_dbm);
 }

-#if defined(USE_SX1262) || defined(USE_SX1268)
-void MyMesh::setRxBoostedGain(bool enable) {
-  radio_driver.setRxBoostedGainMode(enable);
+bool MyMesh::setRxBoostedGain(bool enable) {
+  return radio_driver.setRxBoostedGainMode(enable);
 }
-#endif

 void MyMesh::formatNeighborsReply(char *reply) {
  char *dp = reply;
@@ -150,6 +150,9 @@ protected:
  int getInterferenceThreshold() const override {
    return _prefs.interference_threshold;
  }
+  bool getCADEnabled() const override {
+    return _prefs.cad_enabled;
+  }
  int getAGCResetInterval() const override {
    return ((int)_prefs.agc_reset_interval) * 4000;   // milliseconds
  }
@@ -163,7 +166,7 @@ protected:
  }
 #endif

-  bool filterRecvFloodPacket(mesh::Packet* pkt) override;
+  mesh::DispatcherAction onRecvPacket(mesh::Packet* pkt) override;

  void onAnonDataRecv(mesh::Packet* packet, const uint8_t* secret, const mesh::Identity& sender, uint8_t* data, size_t len) override;
  int searchPeersByHash(const uint8_t* hash) override;
@@ -249,7 +252,6 @@ public:
  // To check if there is pending work
  bool hasPendingWork() const;

-#if defined(USE_SX1262) || defined(USE_SX1268)
-  void setRxBoostedGain(bool enable) override;
-#endif
+  bool setRxBoostedGain(bool enable) override;
+
 };
@@ -41,7 +41,8 @@ void UITask::begin(NodePrefs* node_prefs, const char* build_date, const char* fi
  }

  // v1.2.3 (1 Jan 2025)
-  sprintf(_version_info, "%s (%s)", version, build_date);
+  snprintf(_version_info, sizeof(_version_info), "%s (%s)", version, build_date);
+  free(version);
 }

 void UITask::renderCurrScreen() {
@@ -290,8 +290,7 @@ bool MyMesh::allowPacketForward(const mesh::Packet *packet) {
  return true;
 }

-bool MyMesh::filterRecvFloodPacket(mesh::Packet* pkt) {
-  // just try to determine region for packet (apply later in allowPacketForward())
+mesh::DispatcherAction MyMesh::onRecvPacket(mesh::Packet* pkt) {
  if (pkt->getRouteType() == ROUTE_TYPE_TRANSPORT_FLOOD) {
    recv_pkt_region = region_map.findMatch(pkt, REGION_DENY_FLOOD);
  } else if (pkt->getRouteType() == ROUTE_TYPE_FLOOD) {
@@ -303,8 +302,7 @@ bool MyMesh::filterRecvFloodPacket(mesh::Packet* pkt) {
  } else {
    recv_pkt_region = NULL;
  }
-  // do normal processing
-  return false;
+  return Mesh::onRecvPacket(pkt);
 }

 void MyMesh::onAnonDataRecv(mesh::Packet *packet, const uint8_t *secret, const mesh::Identity &sender,
@@ -627,6 +625,7 @@ MyMesh::MyMesh(mesh::MainBoard &board, mesh::Radio &radio, mesh::MillisecondCloc
  _logging = false;
  region_load_active = false;
  set_radio_at = revert_radio_at = 0;
+  recv_pkt_region = NULL;

  // defaults
  memset(&_prefs, 0, sizeof(_prefs));
@@ -650,6 +649,7 @@ MyMesh::MyMesh(mesh::MainBoard &board, mesh::Radio &radio, mesh::MillisecondCloc
  _prefs.flood_max_unscoped = 64;
  _prefs.flood_max_advert = 8;
  _prefs.interference_threshold = 0; // disabled
+  _prefs.cad_enabled = 0;            // hardware CAD before TX (off by default; 'set cad on')
 #ifdef ROOM_PASSWORD
  StrHelper::strncpy(_prefs.guest_password, ROOM_PASSWORD, sizeof(_prefs.guest_password));
 #endif
@@ -658,6 +658,7 @@ MyMesh::MyMesh(mesh::MainBoard &board, mesh::Radio &radio, mesh::MillisecondCloc
  _prefs.gps_enabled = 0;
  _prefs.gps_interval = 0;
  _prefs.advert_loc_policy = ADVERT_LOC_PREFS;
+  _prefs.radio_fem_rxgain = 1;

  next_post_idx = 0;
  next_client_idx = 0;
@@ -699,6 +700,7 @@ void MyMesh::begin(FILESYSTEM *fs) {

  radio_driver.setParams(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr);
  radio_driver.setTxPower(_prefs.tx_power_dbm);
+  board.setLoRaFemLnaEnabled(_prefs.radio_fem_rxgain);

  updateAdvertTimer();
  updateFloodAdvertTimer();
@@ -144,6 +144,9 @@ protected:
  int getInterferenceThreshold() const override {
    return _prefs.interference_threshold;
  }
+  bool getCADEnabled() const override {
+    return _prefs.cad_enabled;
+  }
  int getAGCResetInterval() const override {
    return ((int)_prefs.agc_reset_interval) * 4000;   // milliseconds
  }
@@ -151,7 +154,7 @@ protected:
    return _prefs.multi_acks;
  }

-  bool filterRecvFloodPacket(mesh::Packet* pkt) override;
+  mesh::DispatcherAction onRecvPacket(mesh::Packet* pkt) override;

  bool allowPacketForward(const mesh::Packet* packet) override;
  void onAnonDataRecv(mesh::Packet* packet, const uint8_t* secret, const mesh::Identity& sender, uint8_t* data, size_t len) override;
@@ -41,7 +41,8 @@ void UITask::begin(NodePrefs* node_prefs, const char* build_date, const char* fi
  }

  // v1.2.3 (1 Jan 2025)
-  sprintf(_version_info, "%s (%s)", version, build_date);
+  snprintf(_version_info, sizeof(_version_info), "%s (%s)", version, build_date);
+  free(version);
 }

 void UITask::renderCurrScreen() {
@@ -135,7 +135,7 @@ class MyMesh : public BaseChatMesh, ContactVisitor {
    File file = _fs->open("/contacts", "w", true);
 #endif
    if (file) {
-      ContactsIterator iter;
+      ContactsIterator iter = startContactsIterator();
      ContactInfo c;
      uint8_t unused = 0;
      uint32_t reserved = 0;
@@ -323,6 +323,9 @@ uint32_t SensorMesh::getDirectRetransmitDelay(const mesh::Packet* packet) {
 int SensorMesh::getInterferenceThreshold() const {
  return _prefs.interference_threshold;
 }
+bool SensorMesh::getCADEnabled() const {
+  return _prefs.cad_enabled;
+}
 int SensorMesh::getAGCResetInterval() const {
  return ((int)_prefs.agc_reset_interval) * 4000;   // milliseconds
 }
@@ -726,11 +729,13 @@ SensorMesh::SensorMesh(mesh::MainBoard& board, mesh::Radio& radio, mesh::Millise
  _prefs.disable_fwd = true;
  _prefs.flood_max = 64;
  _prefs.interference_threshold = 0;  // disabled
+  _prefs.cad_enabled = 0;             // hardware CAD before TX (off by default; 'set cad on')

  // GPS defaults
  _prefs.gps_enabled = 0;
  _prefs.gps_interval = 0;
  _prefs.advert_loc_policy = ADVERT_LOC_PREFS;
+  _prefs.radio_fem_rxgain = 1;

  memset(default_scope.key, 0, sizeof(default_scope.key));
 }
@@ -766,6 +771,7 @@ void SensorMesh::begin(FILESYSTEM* fs) {

  radio_driver.setParams(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr);
  radio_driver.setTxPower(_prefs.tx_power_dbm);
+  board.setLoRaFemLnaEnabled(_prefs.radio_fem_rxgain);

  updateAdvertTimer();
  updateFloodAdvertTimer();
@@ -120,6 +120,7 @@ protected:
  uint32_t getRetransmitDelay(const mesh::Packet* packet) override;
  uint32_t getDirectRetransmitDelay(const mesh::Packet* packet) override;
  int getInterferenceThreshold() const override;
+  bool getCADEnabled() const override;
  int getAGCResetInterval() const override;
  void onAnonDataRecv(mesh::Packet* packet, const uint8_t* secret, const mesh::Identity& sender, uint8_t* data, size_t len) override;
  int searchPeersByHash(const uint8_t* hash) override;
@@ -41,7 +41,8 @@ void UITask::begin(NodePrefs* node_prefs, const char* build_date, const char* fi
  }

  // v1.2.3 (1 Jan 2025)
-  sprintf(_version_info, "%s (%s)", version, build_date);
+  snprintf(_version_info, sizeof(_version_info), "%s (%s)", version, build_date);
+  free(version);
 }

 void UITask::renderCurrScreen() {
@@ -157,6 +157,7 @@ lib_deps =

 [env:native]
 platform = native
+test_framework = googletest
 build_flags = -std=c++17
  -I src
  -I test/mocks
@@ -164,5 +165,6 @@ test_build_src = yes
 build_src_filter =
  -<*>
  +<../src/Utils.cpp>
+  +<../src/Packet.cpp>
 lib_deps =
  google/googletest @ 1.17.0
@@ -66,6 +66,7 @@ uint32_t Dispatcher::getCADFailMaxDuration() const {
 void Dispatcher::loop() {
  if (millisHasNowPassed(next_floor_calib_time)) {
    _radio->triggerNoiseFloorCalibrate(getInterferenceThreshold());
+    _radio->setCADEnabled(getCADEnabled());
    next_floor_calib_time = futureMillis(NOISE_FLOOR_CALIB_INTERVAL);
  }
  _radio->loop();
@@ -65,6 +65,8 @@ public:

  virtual void triggerNoiseFloorCalibrate(int threshold) { }

+  virtual void setCADEnabled(bool enable) { }
+
  virtual void resetAGC() { }

  virtual bool isInRecvMode() const = 0;
@@ -166,6 +168,7 @@ protected:
  virtual uint32_t getCADFailRetryDelay() const;
  virtual uint32_t getCADFailMaxDuration() const;
  virtual int getInterferenceThreshold() const { return 0; }    // disabled by default
+  virtual bool getCADEnabled() const { return false; }    // hardware CAD disabled by default
  virtual int getAGCResetInterval() const { return 0; }    // disabled by default
  virtual unsigned long getDutyCycleWindowMs() const { return 3600000; }

@@ -55,7 +55,8 @@ DispatcherAction Mesh::onRecvPacket(Packet* pkt) {
      uint16_t offset = (uint16_t)pkt->path_len << path_sz;
      if (offset >= len) {   // TRACE has reached end of given path
        onTraceRecv(pkt, trace_tag, auth_code, flags, pkt->path, &pkt->payload[i], len);
-      } else if (self_id.isHashMatch(&pkt->payload[i + offset], 1 << path_sz) && allowPacketForward(pkt) && !_tables->hasSeen(pkt)) {
+      } else if (self_id.isHashMatch(&pkt->payload[i + offset], 1 << path_sz) && allowPacketForward(pkt) && !_tables->wasSeen(pkt)) {
+        _tables->markSeen(pkt);
        // append SNR (Not hash!)
        pkt->path[pkt->path_len++] = (int8_t) (pkt->getSNR()*4);

@@ -89,14 +90,16 @@ DispatcherAction Mesh::onRecvPacket(Packet* pkt) {
      if (pkt->getPayloadType() == PAYLOAD_TYPE_MULTIPART) {
        return forwardMultipartDirect(pkt);
      } else if (pkt->getPayloadType() == PAYLOAD_TYPE_ACK) {
-        if (!_tables->hasSeen(pkt)) {  // don't retransmit!
+        if (!_tables->wasSeen(pkt)) {  // don't retransmit!
+          _tables->markSeen(pkt);
          removeSelfFromPath(pkt);
          routeDirectRecvAcks(pkt, 0);
        }
        return ACTION_RELEASE;
      }

-      if (!_tables->hasSeen(pkt)) {
+      if (!_tables->wasSeen(pkt)) {
+        _tables->markSeen(pkt);
        removeSelfFromPath(pkt);

        uint32_t d = getDirectRetransmitDelay(pkt);
@@ -117,7 +120,8 @@ DispatcherAction Mesh::onRecvPacket(Packet* pkt) {
      memcpy(&ack_crc, &pkt->payload[i], 4); i += 4;
      if (i > pkt->payload_len) {
        MESH_DEBUG_PRINTLN("%s Mesh::onRecvPacket(): incomplete ACK packet", getLogDateTime());
-      } else if (!_tables->hasSeen(pkt)) {
+      } else if (!_tables->wasSeen(pkt)) {
+        _tables->markSeen(pkt);
        onAckRecv(pkt, ack_crc);
        action = routeRecvPacket(pkt);
      }
@@ -134,7 +138,8 @@ DispatcherAction Mesh::onRecvPacket(Packet* pkt) {
      uint8_t* macAndData = &pkt->payload[i];   // MAC + encrypted data 
      if (i + CIPHER_MAC_SIZE >= pkt->payload_len) {
        MESH_DEBUG_PRINTLN("%s Mesh::onRecvPacket(): incomplete data packet", getLogDateTime());
-      } else if (!_tables->hasSeen(pkt)) {
+      } else if (!_tables->wasSeen(pkt)) {
+        _tables->markSeen(pkt);
        // NOTE: this is a 'first packet wins' impl. When receiving from multiple paths, the first to arrive wins.
        //       For flood mode, the path may not be the 'best' in terms of hops.
        // FUTURE: could send back multiple paths, using createPathReturn(), and let sender choose which to use(?)
@@ -155,6 +160,10 @@ DispatcherAction Mesh::onRecvPacket(Packet* pkt) {
              if (pkt->getPayloadType() == PAYLOAD_TYPE_PATH) {
                int k = 0;
                uint8_t path_len = data[k++];
+                if (!Packet::isValidPathLen(path_len)) {
+                  MESH_DEBUG_PRINTLN("%s PAYLOAD_TYPE_PATH, bad path_len: %u", getLogDateTime(), (uint32_t)path_len);
+                  break;   // reject bad encoding
+                }
                uint8_t hash_size = (path_len >> 6) + 1;
                uint8_t hash_count = path_len & 63;
                uint8_t* path = &data[k]; k += hash_size*hash_count;
@@ -193,7 +202,8 @@ DispatcherAction Mesh::onRecvPacket(Packet* pkt) {
      uint8_t* macAndData = &pkt->payload[i];   // MAC + encrypted data 
      if (i + 2 >= pkt->payload_len) {
        MESH_DEBUG_PRINTLN("%s Mesh::onRecvPacket(): incomplete data packet", getLogDateTime());
-      } else if (!_tables->hasSeen(pkt)) {
+      } else if (!_tables->wasSeen(pkt)) {
+        _tables->markSeen(pkt);
        if (self_id.isHashMatch(&dest_hash)) {
          Identity sender(sender_pub_key);

@@ -220,7 +230,8 @@ DispatcherAction Mesh::onRecvPacket(Packet* pkt) {
      uint8_t* macAndData = &pkt->payload[i];   // MAC + encrypted data 
      if (i + 2 >= pkt->payload_len) {
        MESH_DEBUG_PRINTLN("%s Mesh::onRecvPacket(): incomplete data packet", getLogDateTime());
-      } else if (!_tables->hasSeen(pkt)) {
+      } else if (!_tables->wasSeen(pkt)) {
+        _tables->markSeen(pkt);
        // scan channels DB, for all matching hashes of 'channel_hash' (max 4 matches supported ATM)
        GroupChannel channels[4];
        int num = searchChannelsByHash(&channel_hash, channels, 4);
@@ -251,7 +262,8 @@ DispatcherAction Mesh::onRecvPacket(Packet* pkt) {
        MESH_DEBUG_PRINTLN("%s Mesh::onRecvPacket(): incomplete advertisement packet", getLogDateTime());
      } else if (self_id.matches(id.pub_key)) {
        MESH_DEBUG_PRINTLN("%s Mesh::onRecvPacket(): receiving SELF advert packet", getLogDateTime());
-      } else if (!_tables->hasSeen(pkt)) {
+      } else if (!_tables->wasSeen(pkt)) {
+        _tables->markSeen(pkt);
        uint8_t* app_data = &pkt->payload[i];
        int app_data_len = pkt->payload_len - i;
        if (app_data_len > MAX_ADVERT_DATA_SIZE) { app_data_len = MAX_ADVERT_DATA_SIZE; }
@@ -278,7 +290,8 @@ DispatcherAction Mesh::onRecvPacket(Packet* pkt) {
      break;
    }
    case PAYLOAD_TYPE_RAW_CUSTOM: {
-      if (pkt->isRouteDirect() && !_tables->hasSeen(pkt)) {
+      if (pkt->isRouteDirect() && !_tables->wasSeen(pkt)) {
+        _tables->markSeen(pkt);
        onRawDataRecv(pkt);
        //action = routeRecvPacket(pkt);    don't flood route these (yet)
      }
@@ -296,7 +309,8 @@ DispatcherAction Mesh::onRecvPacket(Packet* pkt) {
          tmp.payload_len = pkt->payload_len - 1;
          memcpy(tmp.payload, &pkt->payload[1], tmp.payload_len);

-          if (!_tables->hasSeen(&tmp)) {
+          if (!_tables->wasSeen(&tmp)) {
+            _tables->markSeen(&tmp);
            uint32_t ack_crc;
            memcpy(&ack_crc, tmp.payload, 4);

@@ -353,7 +367,8 @@ DispatcherAction Mesh::forwardMultipartDirect(Packet* pkt) {
    tmp.payload_len = pkt->payload_len - 1;
    memcpy(tmp.payload, &pkt->payload[1], tmp.payload_len);

-    if (!_tables->hasSeen(&tmp)) {   // don't retransmit!
+    if (!_tables->wasSeen(&tmp)) {   // don't retransmit!
+      _tables->markSeen(&tmp);
      removeSelfFromPath(&tmp);
      routeDirectRecvAcks(&tmp, ((uint32_t)remaining + 1) * 300);  // expect multipart ACKs 300ms apart (x2)
    }
@@ -633,7 +648,7 @@ void Mesh::sendFlood(Packet* packet, uint32_t delay_millis, uint8_t path_hash_si
  packet->header |= ROUTE_TYPE_FLOOD;
  packet->setPathHashSizeAndCount(path_hash_size, 0);

-  _tables->hasSeen(packet); // mark this packet as already sent in case it is rebroadcast back to us
+  _tables->markSeen(packet); // mark this packet as already sent in case it is rebroadcast back to us

  uint8_t pri;
  if (packet->getPayloadType() == PAYLOAD_TYPE_PATH) {
@@ -662,7 +677,7 @@ void Mesh::sendFlood(Packet* packet, uint16_t* transport_codes, uint32_t delay_m
  packet->transport_codes[1] = transport_codes[1];
  packet->setPathHashSizeAndCount(path_hash_size, 0);

-  _tables->hasSeen(packet); // mark this packet as already sent in case it is rebroadcast back to us
+  _tables->markSeen(packet); // mark this packet as already sent in case it is rebroadcast back to us

  uint8_t pri;
  if (packet->getPayloadType() == PAYLOAD_TYPE_PATH) {
@@ -695,7 +710,7 @@ void Mesh::sendDirect(Packet* packet, const uint8_t* path, uint8_t path_len, uin
      pri = 0;
    }
  }
-  _tables->hasSeen(packet); // mark this packet as already sent in case it is rebroadcast back to us
+  _tables->markSeen(packet); // mark this packet as already sent in case it is rebroadcast back to us
  sendPacket(packet, pri, delay_millis);
 }

@@ -705,7 +720,7 @@ void Mesh::sendZeroHop(Packet* packet, uint32_t delay_millis) {

  packet->path_len = 0;  // path_len of zero means Zero Hop

-  _tables->hasSeen(packet); // mark this packet as already sent in case it is rebroadcast back to us
+  _tables->markSeen(packet); // mark this packet as already sent in case it is rebroadcast back to us

  sendPacket(packet, 0, delay_millis);
 }
@@ -718,7 +733,7 @@ void Mesh::sendZeroHop(Packet* packet, uint16_t* transport_codes, uint32_t delay

  packet->path_len = 0;  // path_len of zero means Zero Hop

-  _tables->hasSeen(packet); // mark this packet as already sent in case it is rebroadcast back to us
+  _tables->markSeen(packet); // mark this packet as already sent in case it is rebroadcast back to us

  sendPacket(packet, 0, delay_millis);
 }
@@ -15,8 +15,9 @@ public:
 */
 class MeshTables {
 public:
-  virtual bool hasSeen(const Packet* packet) = 0;
-  virtual void clear(const Packet* packet) = 0;   // remove this packet hash from table
+  virtual bool wasSeen(const Packet* packet) = 0;
+  virtual void markSeen(const Packet* packet) = 0;
+  virtual void clear(const Packet* packet) = 0;    // remove this packet hash from table
 };

 /**
@@ -100,7 +101,7 @@ protected:
   * \param  auth_code   a code to authenticate the packet
   * \param  flags       zero for now
   * \param  path_snrs   single byte SNR*4 for each hop in the path
-   * \param  path_hashes hashes if each repeater in the path
+   * \param  path_hashes hashes of each repeater in the path
   * \param  path_len    length of the path_snrs[] and path_hashes[] arrays
  */
  virtual void onTraceRecv(Packet* packet, uint32_t tag, uint32_t auth_code, uint8_t flags, const uint8_t* path_snrs, const uint8_t* path_hashes, uint8_t path_len) { }
@@ -64,6 +64,9 @@ public:
  virtual uint8_t getStartupReason() const = 0;
  virtual bool getBootloaderVersion(char* version, size_t max_len) { return false; }
  virtual bool startOTAUpdate(const char* id, char reply[]) { return false; }   // not supported
+  virtual bool setLoRaFemLnaEnabled(bool enable) { return false; }
+  virtual bool canControlLoRaFemLna() const { return false; }
+  virtual bool isLoRaFemLnaEnabled() const { return false; }

  // Power management interface (boards with power management override these)
  virtual bool isExternalPowered() { return false; }
@@ -25,7 +25,7 @@ namespace mesh {
 #define PAYLOAD_TYPE_GRP_DATA    0x06    // an (unverified) group datagram (prefixed with channel hash, MAC) (enc data: data_type(uint16), data_len, blob)
 #define PAYLOAD_TYPE_ANON_REQ    0x07    // generic request (prefixed with dest_hash, ephemeral pub_key, MAC) (enc data: ...)
 #define PAYLOAD_TYPE_PATH        0x08    // returned path (prefixed with dest/src hashes, MAC) (enc data: path, extra)
-#define PAYLOAD_TYPE_TRACE       0x09    // trace a path, collecting SNI for each hop
+#define PAYLOAD_TYPE_TRACE       0x09    // trace a path, collecting SNR for each hop
 #define PAYLOAD_TYPE_MULTIPART   0x0A    // packet is one of a set of packets
 #define PAYLOAD_TYPE_CONTROL     0x0B    // a control/discovery packet
 //...
@@ -68,29 +68,36 @@ void BaseChatMesh::bootstrapRTCfromContacts() {
 }

 ContactInfo* BaseChatMesh::allocateContactSlot(bool transient_only) {
-  if (num_contacts < MAX_CONTACTS) {
-    return &contacts[num_contacts++];
-  } else if (transient_only || shouldOverwriteWhenFull()) {
-    // Find oldest non-favourite contact by oldest lastmod timestamp
-    int oldest_idx = -1;
-    uint32_t oldest_lastmod = 0xFFFFFFFF;
-    for (int i = 0; i < num_contacts; i++) {
-      if (transient_only) {
-        if (contacts[i].type == ADV_TYPE_NONE && contacts[i].lastmod < oldest_lastmod) {
-          oldest_lastmod = contacts[i].lastmod;
-          oldest_idx = i;
-        }
-      } else {
+  int oldest_idx = -1;
+  uint32_t oldest_lastmod = 0xFFFFFFFF;
+  if (transient_only) {
+    // only allocate from first N
+    for (int i = 0; i < MAX_ANON_CONTACTS; i++) {
+      if (contacts[i].type == ADV_TYPE_NONE && contacts[i].lastmod < oldest_lastmod) {
+        oldest_lastmod = contacts[i].lastmod;
+        oldest_idx = i;
+      }
+    }
+    if (oldest_idx >= 0) {
+      // NOTE: do NOT call onContactOverwrite()
+      return &contacts[oldest_idx];
+    }
+  } else {
+    if (num_contacts < MAX_ANON_CONTACTS+MAX_CONTACTS) {
+      return &contacts[num_contacts++];
+    } else if (shouldOverwriteWhenFull()) {
+      // Find oldest non-favourite contact by oldest lastmod timestamp
+      for (int i = MAX_ANON_CONTACTS; i < num_contacts; i++) {
        bool is_favourite = (contacts[i].flags & 0x01) != 0;
-        if (!is_favourite && contacts[i].lastmod < oldest_lastmod && contacts[i].type != ADV_TYPE_NONE) {
+        if (!is_favourite && contacts[i].lastmod < oldest_lastmod) {
          oldest_lastmod = contacts[i].lastmod;
          oldest_idx = i;
        }
      }
-    }
-    if (oldest_idx >= 0) {
-      onContactOverwrite(contacts[oldest_idx].id.pub_key);
-      return &contacts[oldest_idx];
+      if (oldest_idx >= 0) {
+        onContactOverwrite(contacts[oldest_idx].id.pub_key);
+        return &contacts[oldest_idx];
+      }
    }
  }
  return NULL; // no space, no overwrite or all contacts are all favourites
@@ -139,6 +146,11 @@ void BaseChatMesh::onAdvertRecv(mesh::Packet* packet, const mesh::Identity& id,
    packet->header = save;
  }

+  if (from && from->type == ADV_TYPE_NONE) {   // already in contacts, but from a temporary ANON_REQ ?
+    memset(from, 0, sizeof(*from));  // clear the anon/temp slot
+    from = NULL;  // do normal 'add' flow
+  }
+
  bool is_new = false; // true = not in contacts[], false = exists in contacts[]
  if (from == NULL) {
    if (!shouldAutoAddContactType(parser.getType())) {
@@ -930,11 +942,11 @@ bool BaseChatMesh::getContactByIdx(uint32_t idx, ContactInfo& contact) {
 }

 ContactsIterator BaseChatMesh::startContactsIterator() {
-  return ContactsIterator();
+  return ContactsIterator(MAX_ANON_CONTACTS);   // start at offset, skip the anon entries
 }

 bool ContactsIterator::hasNext(const BaseChatMesh* mesh, ContactInfo& dest) {
-  if (next_idx >= mesh->getNumContacts()) return false;
+  if (next_idx >= mesh->getTotalContactSlots()) return false;

  dest = mesh->contacts[next_idx++];
  return true;
@@ -28,8 +28,9 @@ public:
 class BaseChatMesh;

 class ContactsIterator {
-  int next_idx = 0;
+  int next_idx;
 public:
+  ContactsIterator(int start) { next_idx = start; }
  bool hasNext(const BaseChatMesh* mesh, ContactInfo& dest);
 };

@@ -79,8 +80,9 @@ class BaseChatMesh : public mesh::Mesh {
 protected:
  BaseChatMesh(mesh::Radio& radio, mesh::MillisecondClock& ms, mesh::RNG& rng, mesh::RTCClock& rtc, mesh::PacketManager& mgr, mesh::MeshTables& tables)
      : mesh::Mesh(radio, ms, rng, rtc, mgr, tables)
-  { 
-    num_contacts = 0;
+  {
+    resetContacts();
+
  #ifdef MAX_GROUP_CHANNELS
    memset(channels, 0, sizeof(channels));
    num_channels = 0;
@@ -91,7 +93,11 @@ protected:
  }

  void bootstrapRTCfromContacts();
-  void resetContacts() { num_contacts = 0; }
+
+  void resetContacts() {
+    memset(contacts, 0, sizeof(contacts[0])*MAX_ANON_CONTACTS);   // set all to have type = ADV_TYPE_NONE(0)
+    num_contacts = MAX_ANON_CONTACTS;  // seed the first contacts for anon requests
+  }
  void populateContactFromAdvert(ContactInfo& ci, const mesh::Identity& id, const AdvertDataParser& parser, uint32_t timestamp);
  ContactInfo* allocateContactSlot(bool transient_only=false); // helper to find slot for new contact

@@ -166,7 +172,8 @@ public:
  ContactInfo* lookupContactByPubKey(const uint8_t* pub_key, int prefix_len);
  bool  removeContact(ContactInfo& contact);
  bool  addContact(const ContactInfo& contact);
-  int getNumContacts() const { return num_contacts; }
+  int getTotalContactSlots() const { return num_contacts; }
+  int getNumContacts() const { return num_contacts - MAX_ANON_CONTACTS; }  // don't include the reserved slots at start
  bool getContactByIdx(uint32_t idx, ContactInfo& contact);
  ContactsIterator startContactsIterator();
  ChannelDetails* addChannel(const char* name, const char* psk_base64);
@@ -88,10 +88,12 @@ void CommonCLI::loadPrefsInt(FILESYSTEM* fs, const char* filename) {
    file.read((uint8_t *)&_prefs->discovery_mod_timestamp, sizeof(_prefs->discovery_mod_timestamp)); // 162
    file.read((uint8_t *)&_prefs->adc_multiplier, sizeof(_prefs->adc_multiplier));                 // 166
    file.read((uint8_t *)_prefs->owner_info, sizeof(_prefs->owner_info));                          // 170
-    file.read((uint8_t *)&_prefs->rx_boosted_gain, sizeof(_prefs->rx_boosted_gain));              // 290
-    file.read((uint8_t *)&_prefs->flood_max_unscoped, sizeof(_prefs->flood_max_unscoped));   // 291
-    file.read((uint8_t *)&_prefs->flood_max_advert, sizeof(_prefs->flood_max_advert));       // 292
-    // next: 293
+    file.read((uint8_t *)&_prefs->rx_boosted_gain, sizeof(_prefs->rx_boosted_gain));               // 290
+    file.read((uint8_t *)&_prefs->flood_max_unscoped, sizeof(_prefs->flood_max_unscoped));         // 291
+    file.read((uint8_t *)&_prefs->flood_max_advert, sizeof(_prefs->flood_max_advert));             // 292
+    file.read((uint8_t *)&_prefs->radio_fem_rxgain, sizeof(_prefs->radio_fem_rxgain));             // 293
+    file.read((uint8_t *)&_prefs->cad_enabled, sizeof(_prefs->cad_enabled));                       // 294
+    // next: 295

    // sanitise bad pref values
    _prefs->rx_delay_base = constrain(_prefs->rx_delay_base, 0, 20.0f);
@@ -121,6 +123,8 @@ void CommonCLI::loadPrefsInt(FILESYSTEM* fs, const char* filename) {

    // sanitise settings
    _prefs->rx_boosted_gain = constrain(_prefs->rx_boosted_gain, 0, 1); // boolean
+    _prefs->radio_fem_rxgain = constrain(_prefs->radio_fem_rxgain, 0, 1); // boolean
+    _prefs->cad_enabled = constrain(_prefs->cad_enabled, 0, 1); // boolean

    file.close();
  }
@@ -181,10 +185,12 @@ void CommonCLI::savePrefs(FILESYSTEM* fs) {
    file.write((uint8_t *)&_prefs->discovery_mod_timestamp, sizeof(_prefs->discovery_mod_timestamp)); // 162
    file.write((uint8_t *)&_prefs->adc_multiplier, sizeof(_prefs->adc_multiplier));                 // 166
    file.write((uint8_t *)_prefs->owner_info, sizeof(_prefs->owner_info));                          // 170
-    file.write((uint8_t *)&_prefs->rx_boosted_gain, sizeof(_prefs->rx_boosted_gain));              // 290
-    file.write((uint8_t *)&_prefs->flood_max_unscoped, sizeof(_prefs->flood_max_unscoped));   // 291
-    file.write((uint8_t *)&_prefs->flood_max_advert, sizeof(_prefs->flood_max_advert));       // 292
-    // next: 293
+    file.write((uint8_t *)&_prefs->rx_boosted_gain, sizeof(_prefs->rx_boosted_gain));               // 290
+    file.write((uint8_t *)&_prefs->flood_max_unscoped, sizeof(_prefs->flood_max_unscoped));         // 291
+    file.write((uint8_t *)&_prefs->flood_max_advert, sizeof(_prefs->flood_max_advert));             // 292
+    file.write((uint8_t *)&_prefs->radio_fem_rxgain, sizeof(_prefs->radio_fem_rxgain));             // 293
+    file.write((uint8_t *)&_prefs->cad_enabled, sizeof(_prefs->cad_enabled));                       // 294
+    // next: 295

    file.close();
  }
@@ -500,6 +506,10 @@ void CommonCLI::handleSetCmd(uint32_t sender_timestamp, char* command, char* rep
    _prefs->interference_threshold = atoi(&config[11]);
    savePrefs();
    strcpy(reply, "OK");
+  } else if (memcmp(config, "cad ", 4) == 0) {
+    _prefs->cad_enabled = memcmp(&config[4], "on", 2) == 0;
+    savePrefs();
+    strcpy(reply, "OK");
  } else if (memcmp(config, "agc.reset.interval ", 19) == 0) {
    _prefs->agc_reset_interval = atoi(&config[19]) / 4;
    savePrefs();
@@ -561,13 +571,37 @@ void CommonCLI::handleSetCmd(uint32_t sender_timestamp, char* command, char* rep
    _prefs->disable_fwd = memcmp(&config[7], "off", 3) == 0;
    savePrefs();
    strcpy(reply, _prefs->disable_fwd ? "OK - repeat is now OFF" : "OK - repeat is now ON");
-#if defined(USE_SX1262) || defined(USE_SX1268) || defined(USE_LR1110)
  } else if (memcmp(config, "radio.rxgain ", 13) == 0) {
-    _prefs->rx_boosted_gain = memcmp(&config[13], "on", 2) == 0;
-    strcpy(reply, "OK");
+    bool enabled = memcmp(&config[13], "on", 2) == 0;
+    _prefs->rx_boosted_gain = enabled;
    savePrefs();
-    _callbacks->setRxBoostedGain(_prefs->rx_boosted_gain);
-#endif
+    if (_callbacks->setRxBoostedGain(enabled)) {
+      strcpy(reply, "OK");
+    } else {
+      strcpy(reply, "Error: unsupported");
+    }
+  } else if (memcmp(config, "radio.fem.rxgain ", 17) == 0) {
+    if (!_board->canControlLoRaFemLna()) {
+      strcpy(reply, "Error: unsupported");
+    } else if (memcmp(&config[17], "on", 2) == 0) {
+      if (_board->setLoRaFemLnaEnabled(true)) {
+        _prefs->radio_fem_rxgain = 1;
+        savePrefs();
+        strcpy(reply, "OK - LoRa FEM RX gain on");
+      } else {
+        strcpy(reply, "Error: failed to apply LoRa FEM RX gain");
+      }
+    } else if (memcmp(&config[17], "off", 3) == 0) {
+      if (_board->setLoRaFemLnaEnabled(false)) {
+        _prefs->radio_fem_rxgain = 0;
+        savePrefs();
+        strcpy(reply, "OK - LoRa FEM RX gain off");
+      } else {
+        strcpy(reply, "Error: failed to apply LoRa FEM RX gain");
+      }
+    } else {
+      strcpy(reply, "Error: state must be on or off");
+    }
  } else if (memcmp(config, "radio ", 6) == 0) {
    strcpy(tmp, &config[6]);
    const char *parts[4];
@@ -757,7 +791,7 @@ void CommonCLI::handleSetCmd(uint32_t sender_timestamp, char* command, char* rep
      }
    } else {
      _prefs->adc_multiplier = 0.0f;
-      strcpy(reply, "Error: unsupported by this board");
+      strcpy(reply, "Error: unsupported");
    };
  } else {
    strcpy(reply, "unknown config: ");
@@ -776,6 +810,8 @@ void CommonCLI::handleGetCmd(uint32_t sender_timestamp, char* command, char* rep
    sprintf(reply, "> %s", StrHelper::ftoa(_prefs->airtime_factor));
  } else if (memcmp(config, "int.thresh", 10) == 0) {
    sprintf(reply, "> %d", (uint32_t) _prefs->interference_threshold);
+  } else if (memcmp(config, "cad", 3) == 0) {
+    sprintf(reply, "> %s", _prefs->cad_enabled ? "on" : "off");
  } else if (memcmp(config, "agc.reset.interval", 18) == 0) {
    sprintf(reply, "> %d", ((uint32_t) _prefs->agc_reset_interval) * 4);
  } else if (memcmp(config, "multi.acks", 10) == 0) {
@@ -801,10 +837,14 @@ void CommonCLI::handleGetCmd(uint32_t sender_timestamp, char* command, char* rep
    sprintf(reply, "> %s", StrHelper::ftoa(_prefs->node_lat));
  } else if (memcmp(config, "lon", 3) == 0) {
    sprintf(reply, "> %s", StrHelper::ftoa(_prefs->node_lon));
-#if defined(USE_SX1262) || defined(USE_SX1268) || defined(USE_LR1110)
  } else if (memcmp(config, "radio.rxgain", 12) == 0) {
    sprintf(reply, "> %s", _prefs->rx_boosted_gain ? "on" : "off");
-#endif
+  } else if (memcmp(config, "radio.fem.rxgain", 16) == 0) {
+    if (!_board->canControlLoRaFemLna()) {
+      strcpy(reply, "Error: unsupported");
+    } else {
+      sprintf(reply, "> %s", _board->isLoRaFemLnaEnabled() ? "on" : "off");
+    }
  } else if (memcmp(config, "radio", 5) == 0) {
    char freq[16], bw[16];
    strcpy(freq, StrHelper::ftoa(_prefs->freq));
@@ -890,12 +930,12 @@ void CommonCLI::handleGetCmd(uint32_t sender_timestamp, char* command, char* rep
          strcpy(reply, "> unknown");
      }
  #else
-      strcpy(reply, "ERROR: unsupported");
+      strcpy(reply, "Error: unsupported");
  #endif
  } else if (memcmp(config, "adc.multiplier", 14) == 0) {
    float adc_mult = _board->getAdcMultiplier();
    if (adc_mult == 0.0f) {
-      strcpy(reply, "Error: unsupported by this board");
+      strcpy(reply, "Error: unsupported");
    } else {
      sprintf(reply, "> %.3f", adc_mult);
    }
@@ -913,13 +953,9 @@ void CommonCLI::handleGetCmd(uint32_t sender_timestamp, char* command, char* rep
    strcpy(reply, "ERROR: Power management not supported");
 #endif
  } else if (memcmp(config, "pwrmgt.bootreason", 17) == 0) {
-#ifdef NRF52_POWER_MANAGEMENT
    sprintf(reply, "> Reset: %s; Shutdown: %s",
      _board->getResetReasonString(_board->getResetReason()),
      _board->getShutdownReasonString(_board->getShutdownReason()));
-#else
-    strcpy(reply, "ERROR: Power management not supported");
-#endif
  } else if (memcmp(config, "pwrmgt.bootmv", 13) == 0) {
 #ifdef NRF52_POWER_MANAGEMENT
    sprintf(reply, "> %u mV", _board->getBootVoltage());
@@ -61,8 +61,10 @@ struct NodePrefs { // persisted to file
  float adc_multiplier;
  char owner_info[120];
  uint8_t rx_boosted_gain; // power settings
+  uint8_t radio_fem_rxgain; // LoRa FEM RX gain setting
  uint8_t path_hash_mode;   // which path mode to use when sending
  uint8_t loop_detect;
+  uint8_t cad_enabled;      // hardware Channel Activity Detection before TX (boolean)
 };

 class CommonCLICallbacks {
@@ -109,8 +111,8 @@ public:
    // no op by default
  };

-  virtual void setRxBoostedGain(bool enable) {
-    // no op by default
+  virtual bool setRxBoostedGain(bool enable) {
+    return false; // CommonCLI reports unsupported if not overridden by wrapper
  };
 };

@@ -155,6 +155,42 @@ public:
  void setInhibitSleep(bool inhibit) {
    inhibit_sleep = inhibit;
  }
+
+  uint32_t getResetReason() const override {
+    return esp_reset_reason();
+  }
+
+  // https://docs.espressif.com/projects/esp-idf/en/v4.4.7/esp32/api-reference/system/system.html
+  const char* getResetReasonString(uint32_t reason) {
+    switch (reason) {
+      case ESP_RST_UNKNOWN:
+        return "Unknown or first boot";
+      case ESP_RST_POWERON:
+        return "Power-on reset";
+      case ESP_RST_EXT:
+        return "External reset";
+      case ESP_RST_SW:
+        return "Software reset";
+      case ESP_RST_PANIC:
+        return "Panic / exception reset";
+      case ESP_RST_INT_WDT:
+        return "Interrupt watchdog reset";
+      case ESP_RST_TASK_WDT:
+        return "Task watchdog reset";
+      case ESP_RST_WDT:
+        return "Other watchdog reset";
+      case ESP_RST_DEEPSLEEP:
+        return "Wake from deep sleep";
+      case ESP_RST_BROWNOUT:
+        return "Brownout (low voltage)";
+      case ESP_RST_SDIO:
+        return "SDIO reset";
+      default:
+        static char buf[40];
+        snprintf(buf, sizeof(buf), "Unknown reset reason (%d)", reason);
+        return buf;
+    }
+  }
 };

 class ESP32RTCClock : public mesh::RTCClock {
@@ -139,7 +139,7 @@ bool RegionMap::save(FILESYSTEM* _fs, const char* path) {
      }
    }
    file.close();
-    return true;
+    return success;
  }
  return false;  // failed
 }
@@ -31,27 +31,31 @@ public:
  }
 #endif

-  bool hasSeen(const mesh::Packet* packet) override {
+  bool wasSeen(const mesh::Packet* packet) override {
    uint8_t hash[MAX_HASH_SIZE];
    packet->calculatePacketHash(hash);

    const uint8_t* sp = _hashes;
    for (int i = 0; i < MAX_PACKET_HASHES; i++, sp += MAX_HASH_SIZE) {
-      if (memcmp(hash, sp, MAX_HASH_SIZE) == 0) { 
+      if (memcmp(hash, sp, MAX_HASH_SIZE) == 0) {
        if (packet->isRouteDirect()) {
-          _direct_dups++;   // keep some stats
+          _direct_dups++;
        } else {
          _flood_dups++;
        }
        return true;
      }
    }
-
-    memcpy(&_hashes[_next_idx*MAX_HASH_SIZE], hash, MAX_HASH_SIZE);
-    _next_idx = (_next_idx + 1) % MAX_PACKET_HASHES;  // cyclic table
    return false;
  }

+  void markSeen(const mesh::Packet* packet) override {
+    uint8_t hash[MAX_HASH_SIZE];
+    packet->calculatePacketHash(hash);
+    memcpy(&_hashes[_next_idx * MAX_HASH_SIZE], hash, MAX_HASH_SIZE);
+    _next_idx = (_next_idx + 1) % MAX_PACKET_HASHES;
+  }
+
  void clear(const mesh::Packet* packet) override {
    uint8_t hash[MAX_HASH_SIZE];
    packet->calculatePacketHash(hash);
@@ -39,7 +39,8 @@ void BridgeBase::handleReceivedPacket(mesh::Packet *packet) {
    return;
  }

-  if (!_seen_packets.hasSeen(packet)) {
+  if (!_seen_packets.wasSeen(packet)) {
+    _seen_packets.markSeen(packet);
    // bridge_delay provides a buffer to prevent immediate processing conflicts in the mesh network.
    _mgr->queueInbound(packet, millis() + _prefs->bridge_delay);
  } else {
@@ -110,7 +110,7 @@ protected:
   * @brief Common packet handling for received packets
   *
   * Implements the standard pattern used by all bridges:
-   * - Check if packet was seen before using _seen_packets.hasSeen()
+   * - Check if packet was seen before using _seen_packets.wasSeen()
   * - Queue packet for mesh processing if not seen before
   * - Free packet if already seen to prevent duplicates
   *
@@ -32,7 +32,7 @@ void ESPNowBridge::begin() {
  // Initialize WiFi in station mode
  WiFi.mode(WIFI_STA);
  
-  // Set wifi channel
+  // Set Wi-Fi channel
  if (esp_wifi_set_channel(_prefs->bridge_channel, WIFI_SECOND_CHAN_NONE) != ESP_OK) {
    BRIDGE_DEBUG_PRINTLN("Error setting WIFI channel to %d\n", _prefs->bridge_channel);
    return;
@@ -167,7 +167,8 @@ void ESPNowBridge::sendPacket(mesh::Packet *packet) {
    return;
  }

-  if (!_seen_packets.hasSeen(packet)) {
+  if (!_seen_packets.wasSeen(packet)) {
+    _seen_packets.markSeen(packet);
    // Create a temporary buffer just for size calculation and reuse for actual writing
    uint8_t sizingBuffer[MAX_PAYLOAD_SIZE];
    uint16_t meshPacketLen = packet->writeTo(sizingBuffer);
@@ -115,7 +115,8 @@ void RS232Bridge::sendPacket(mesh::Packet *packet) {
    return;
  }

-  if (!_seen_packets.hasSeen(packet)) {
+  if (!_seen_packets.wasSeen(packet)) {
+    _seen_packets.markSeen(packet);

    uint8_t buffer[MAX_SERIAL_PACKET_SIZE];
    uint16_t len = packet->writeTo(buffer + 4);
@@ -38,7 +38,7 @@ public:
   * These two functions do nothing for ESP-NOW, but are needed for the
   * Radio interface.
   */
-  virtual void setRxBoostedGainMode(bool) { }
+  virtual bool setRxBoostedGainMode(bool) { }
  virtual bool getRxBoostedGainMode() const { return false; }

  uint32_t intID();
@@ -33,8 +33,8 @@ public:

  void doResetAGC() override { sx126xResetAGC((SX126x *)_radio); }

-  void setRxBoostedGainMode(bool en) override {
-    ((CustomLLCC68 *)_radio)->setRxBoostedGainMode(en);
+  bool setRxBoostedGainMode(bool en) override {
+    return ((CustomLLCC68 *)_radio)->setRxBoostedGainMode(en) == RADIOLIB_ERR_NONE;
  }
  bool getRxBoostedGainMode() const override {
    return ((CustomLLCC68 *)_radio)->getRxBoostedGainMode();
@@ -26,6 +26,11 @@ public:
    return rssi;
  }

+  uint32_t getEstAirtimeFor(int len_bytes) override {
+    auto airtime = RadioLibWrapper::getEstAirtimeFor(len_bytes);
+    return airtime < 200 ? 200 : airtime;   // at least 200 millis
+  }
+
  void onSendFinished() override {
    RadioLibWrapper::onSendFinished();
    _radio->setPreambleLength(preambleLengthForSF(getSpreadingFactor())); // overcomes weird issues with small and big pkts
@@ -36,8 +41,8 @@ public:

  uint8_t getSpreadingFactor() const override { return ((CustomLR1110 *)_radio)->getSpreadingFactor(); }
  
-  void setRxBoostedGainMode(bool en) override {
-    ((CustomLR1110 *)_radio)->setRxBoostedGainMode(en);
+  bool setRxBoostedGainMode(bool en) override {
+    return ((CustomLR1110 *)_radio)->setRxBoostedGainMode(en) == RADIOLIB_ERR_NONE;
  }
  bool getRxBoostedGainMode() const override {
    return ((CustomLR1110 *)_radio)->getRxBoostedGainMode();
@@ -1,6 +1,7 @@
 #pragma once

 #include <RadioLib.h>
+#include "MeshCore.h"

 #define SX126X_IRQ_HEADER_VALID                0b0000010000  //  4     4     valid LoRa header received
 #define SX126X_IRQ_PREAMBLE_DETECTED           0x04
@@ -27,6 +28,14 @@ class CustomSX1262 : public SX1262 {
      uint8_t cr = 5;
  #endif

+  #ifdef SX126X_USE_REGULATOR_LDO
+      constexpr bool useRegulatorLDO = SX126X_USE_REGULATOR_LDO;
+  #else
+      constexpr bool useRegulatorLDO = false;
+  #endif
+
+      MESH_DEBUG_PRINTLN("SX1262 regulator requested: %s", useRegulatorLDO ? "LDO" : "DC-DC");
+
  #if defined(P_LORA_SCLK)
    #ifdef NRF52_PLATFORM
      if (spi) { spi->setPins(P_LORA_MISO, P_LORA_SCLK, P_LORA_MOSI); spi->begin(); }
@@ -42,11 +51,12 @@ class CustomSX1262 : public SX1262 {
      if (spi) spi->begin(P_LORA_SCLK, P_LORA_MISO, P_LORA_MOSI);
    #endif
  #endif
-      int status = begin(LORA_FREQ, LORA_BW, LORA_SF, cr, RADIOLIB_SX126X_SYNC_WORD_PRIVATE, LORA_TX_POWER, 16, tcxo);
+      int status = begin(LORA_FREQ, LORA_BW, LORA_SF, cr, RADIOLIB_SX126X_SYNC_WORD_PRIVATE, LORA_TX_POWER, 16, tcxo, useRegulatorLDO);
      // if radio init fails with -707/-706, try again with tcxo voltage set to 0.0f
      if (status == RADIOLIB_ERR_SPI_CMD_FAILED || status == RADIOLIB_ERR_SPI_CMD_INVALID) {
+        MESH_DEBUG_PRINTLN("SX1262 init failed with error %d, retrying with TCXO at 0.0V", status);
        tcxo = 0.0f;
-        status = begin(LORA_FREQ, LORA_BW, LORA_SF, cr, RADIOLIB_SX126X_SYNC_WORD_PRIVATE, LORA_TX_POWER, 16, tcxo);
+        status = begin(LORA_FREQ, LORA_BW, LORA_SF, cr, RADIOLIB_SX126X_SYNC_WORD_PRIVATE, LORA_TX_POWER, 16, tcxo, useRegulatorLDO);
      }
      if (status != RADIOLIB_ERR_NONE) {
        Serial.print("ERROR: radio init failed: ");
@@ -83,6 +93,8 @@ class CustomSX1262 : public SX1262 {
    writeRegister(0x8B5, &r_data, 1);
  #endif

+      MESH_DEBUG_PRINTLN("SX1262 status=0x%02X device_errors=0x%04X", getStatus(), getDeviceErrors());
+
      return true;  // success
    }

@@ -40,8 +40,8 @@ public:

  void doResetAGC() override { sx126xResetAGC((SX126x *)_radio); }

-  void setRxBoostedGainMode(bool en) override {
-    ((CustomSX1262 *)_radio)->setRxBoostedGainMode(en);
+  bool setRxBoostedGainMode(bool en) override {
+    return ((CustomSX1262 *)_radio)->setRxBoostedGainMode(en) == RADIOLIB_ERR_NONE;
  }
  bool getRxBoostedGainMode() const override {
    return ((CustomSX1262 *)_radio)->getRxBoostedGainMode();
@@ -37,8 +37,8 @@ public:

  void doResetAGC() override { sx126xResetAGC((SX126x *)_radio); }

-  void setRxBoostedGainMode(bool en) override {
-    ((CustomSX1268 *)_radio)->setRxBoostedGainMode(en);
+  bool setRxBoostedGainMode(bool en) override {
+    return ((CustomSX1268 *)_radio)->setRxBoostedGainMode(en) == RADIOLIB_ERR_NONE;
  }
  bool getRxBoostedGainMode() const override {
    return ((CustomSX1268 *)_radio)->getRxBoostedGainMode();
@@ -36,6 +36,7 @@ void RadioLibWrapper::begin() {

  _noise_floor = 0;
  _threshold = 0;
+  _cad_enabled = false;

  // start average out some samples
  _num_floor_samples = 0;
@@ -178,10 +179,26 @@ void RadioLibWrapper::onSendFinished() {
  state = STATE_IDLE;
 }

+int16_t RadioLibWrapper::performChannelScan() {
+  return _radio->scanChannel();
+}
+
 bool RadioLibWrapper::isChannelActive() {
-  return _threshold == 0 
-          ? false    // interference check is disabled
-          : getCurrentRSSI() > _noise_floor + _threshold;
+  // int.thresh: RSSI-based interference detection (relative to noise floor)
+  if (_threshold != 0 && getCurrentRSSI() > _noise_floor + _threshold) return true;
+
+  // cad: hardware channel activity detection
+  if (_cad_enabled) {
+    int16_t result = performChannelScan();
+    // scanChannel() triggers DIO interrupt (CAD done) which sets STATE_INT_READY
+    // via setFlag() ISR. Clear it before restarting RX so recvRaw() doesn't
+    // try to read a non-existent packet and count a spurious recv error.
+    state = STATE_IDLE;
+    startRecv();
+    if (result != RADIOLIB_CHANNEL_FREE) return true;
+  }
+
+  return false;
 }

 float RadioLibWrapper::getLastRSSI() const {
@@ -9,6 +9,7 @@ protected:
  mesh::MainBoard* _board;
  uint32_t n_recv, n_sent, n_recv_errors;
  int16_t _noise_floor, _threshold;
+  bool _cad_enabled;
  uint16_t _num_floor_samples;
  int32_t _floor_sample_sum;
  uint8_t _preamble_sf;
@@ -32,7 +33,7 @@ public:
  bool isInRecvMode() const override;
  bool isChannelActive();

-  bool isReceiving() override { 
+  bool isReceiving() override {
    if (isReceivingPacket()) return true;

    return isChannelActive();
@@ -46,9 +47,11 @@ public:
  virtual uint8_t getSpreadingFactor() const { return LORA_SF; }
  static uint16_t preambleLengthForSF(uint8_t sf) { return sf <= 8 ? 32 : 16; }
  void updatePreamble(uint8_t sf) { _preamble_sf = sf; _radio->setPreambleLength(preambleLengthForSF(sf)); }
+  virtual int16_t performChannelScan();

  int getNoiseFloor() const override { return _noise_floor; }
  void triggerNoiseFloorCalibrate(int threshold) override;
+  void setCADEnabled(bool enable) override { _cad_enabled = enable; }
  void resetAGC() override;

  void loop() override;
@@ -63,7 +66,7 @@ public:

  float packetScore(float snr, int packet_len) override { return packetScoreInt(snr, 10, packet_len); }  // assume sf=10

-  virtual void setRxBoostedGainMode(bool) { }
+  virtual bool setRxBoostedGainMode(bool) { return false; }
  virtual bool getRxBoostedGainMode() const { return false; }
 };

@@ -142,7 +142,7 @@ public:
      case LPP_GPS:
        _pos += 9; break;
      case LPP_POLYLINE:
-        _pos += 8; break;  // TODO: this is MINIMIUM
+        _pos += 8; break;  // TODO: this is MINIMUM
      case LPP_GYROMETER:
      case LPP_ACCELEROMETER:
        _pos += 6; break;
@@ -37,7 +37,7 @@ static int _internal_flash_read(const struct lfs_config *c, lfs_block_t block, l
 }    

 // Program a region in a block. The block must have previously
-// been erased. Negative error codes are propogated to the user.
+// been erased. Negative error codes are propagated to the user.
 // May return LFS_ERR_CORRUPT if the block should be considered bad.
 static int _internal_flash_prog(const struct lfs_config *c, lfs_block_t block, lfs_off_t off, const void *buffer, lfs_size_t size)
 {    
@@ -62,7 +62,7 @@ static int _internal_flash_prog(const struct lfs_config *c, lfs_block_t block, l

 // Erase a block. A block must be erased before being programmed.
 // The state of an erased block is undefined. Negative error codes
-// are propogated to the user.
+// are propagated to the user.
 // May return LFS_ERR_CORRUPT if the block should be considered bad.
 static int _internal_flash_erase(const struct lfs_config *c, lfs_block_t block)
 {   
@@ -87,7 +87,7 @@ static int _internal_flash_erase(const struct lfs_config *c, lfs_block_t block)
 }   

 // Sync the state of the underlying block device. Negative error codes
-// are propogated to the user.
+// are propagated to the user.
 static int _internal_flash_sync(const struct lfs_config *c)
 {    
    return LFS_ERR_OK; // don't need sync
@@ -1166,7 +1166,7 @@ char DefaultFontTableLookup(const uint8_t ch) {
 	uint8_t last = LASTCHAR;   // get last char
 	LASTCHAR = ch;

-	switch (last) {    // conversion depnding on first UTF8-character
+	switch (last) {    // conversion depending on first UTF8-character
 		case 0xC2: return (uint8_t) ch;
 		case 0xC3: return (uint8_t) (ch | 0xC0);
 		case 0x82: if (ch == 0xAC) return (uint8_t) 0x80;    // special case Euro-symbol
@@ -1,12 +1,400 @@
 #include "ST7735Display.h"

-#ifndef DISPLAY_ROTATION
-  #define DISPLAY_ROTATION 2
-#endif
+//#include <Fonts/GFXFF/FreeSans9pt7b.h>
+
+// Optimised ST7735 display driver, derived from Adafruit_ST7735 library.
+
+#define ST_CMD_DELAY 0x80 // special signifier for command lists
+
+#define ST77XX_NOP 0x00
+#define ST77XX_SWRESET 0x01
+#define ST77XX_RDDID 0x04
+#define ST77XX_RDDST 0x09
+
+#define ST77XX_SLPIN 0x10
+#define ST77XX_SLPOUT 0x11
+#define ST77XX_PTLON 0x12
+#define ST77XX_NORON 0x13
+
+#define ST77XX_INVOFF 0x20
+#define ST77XX_INVON 0x21
+#define ST77XX_DISPOFF 0x28
+#define ST77XX_DISPON 0x29
+#define ST77XX_CASET 0x2A
+#define ST77XX_RASET 0x2B
+#define ST77XX_RAMWR 0x2C
+#define ST77XX_RAMRD 0x2E
+
+#define ST77XX_PTLAR 0x30
+#define ST77XX_TEOFF 0x34
+#define ST77XX_TEON 0x35
+#define ST77XX_MADCTL 0x36
+#define ST77XX_COLMOD 0x3A
+
+#define ST77XX_MADCTL_MY 0x80
+#define ST77XX_MADCTL_MX 0x40
+#define ST77XX_MADCTL_MV 0x20
+#define ST77XX_MADCTL_ML 0x10
+#define ST77XX_MADCTL_RGB 0x00
+
+#define ST77XX_RDID1 0xDA
+#define ST77XX_RDID2 0xDB
+#define ST77XX_RDID3 0xDC
+#define ST77XX_RDID4 0xDD
+
+// Some ready-made 16-bit ('565') color settings:
+#define ST77XX_BLACK 0x0000
+#define ST77XX_WHITE 0xFFFF
+#define ST77XX_RED 0xF800
+#define ST77XX_GREEN 0x07E0
+#define ST77XX_BLUE 0x001F
+#define ST77XX_CYAN 0x07FF
+#define ST77XX_MAGENTA 0xF81F
+#define ST77XX_YELLOW 0xFFE0
+#define ST77XX_ORANGE 0xFC00
+
+
+// some flags for initR() :(
+#define INITR_GREENTAB 0x00
+#define INITR_REDTAB 0x01
+#define INITR_BLACKTAB 0x02
+#define INITR_18GREENTAB INITR_GREENTAB
+#define INITR_18REDTAB INITR_REDTAB
+#define INITR_18BLACKTAB INITR_BLACKTAB
+#define INITR_144GREENTAB 0x01
+#define INITR_MINI160x80 0x04
+#define INITR_HALLOWING 0x05
+#define INITR_MINI160x80_PLUGIN 0x06
+
+// Some register settings
+#define ST7735_MADCTL_BGR 0x08
+#define ST7735_MADCTL_MH 0x04
+
+#define ST7735_FRMCTR1 0xB1
+#define ST7735_FRMCTR2 0xB2
+#define ST7735_FRMCTR3 0xB3
+#define ST7735_INVCTR 0xB4
+#define ST7735_DISSET5 0xB6
+
+#define ST7735_PWCTR1 0xC0
+#define ST7735_PWCTR2 0xC1
+#define ST7735_PWCTR3 0xC2
+#define ST7735_PWCTR4 0xC3
+#define ST7735_PWCTR5 0xC4
+#define ST7735_VMCTR1 0xC5
+
+#define ST7735_PWCTR6 0xFC
+
+#define ST7735_GMCTRP1 0xE0
+#define ST7735_GMCTRN1 0xE1
+
+// Some ready-made 16-bit ('565') color settings:
+#define ST7735_BLACK ST77XX_BLACK
+#define ST7735_WHITE ST77XX_WHITE
+#define ST7735_RED ST77XX_RED
+#define ST7735_GREEN ST77XX_GREEN
+#define ST7735_BLUE ST77XX_BLUE
+#define ST7735_CYAN ST77XX_CYAN
+#define ST7735_MAGENTA ST77XX_MAGENTA
+#define ST7735_YELLOW ST77XX_YELLOW
+#define ST7735_ORANGE ST77XX_ORANGE
+
+static TFT_eSPI lcd = TFT_eSPI(160, 80);
+static uint32_t curr_color;
+
+#define  _spi   (&SPI1)
+
+SPISettings  _spiSettings = SPISettings(40000000, MSBFIRST, SPI_MODE0);
+
+// clang-format off
+static const uint8_t PROGMEM
+  Bcmd[] = {                        // Init commands for 7735B screens
+    18,                             // 18 commands in list:
+    ST77XX_SWRESET,   ST_CMD_DELAY, //  1: Software reset, no args, w/delay
+      50,                           //     50 ms delay
+    ST77XX_SLPOUT,    ST_CMD_DELAY, //  2: Out of sleep mode, no args, w/delay
+      255,                          //     255 = max (500 ms) delay
+    ST77XX_COLMOD,  1+ST_CMD_DELAY, //  3: Set color mode, 1 arg + delay:
+      0x05,                         //     16-bit color
+      10,                           //     10 ms delay
+    ST7735_FRMCTR1, 3+ST_CMD_DELAY, //  4: Frame rate control, 3 args + delay:
+      0x00,                         //     fastest refresh
+      0x06,                         //     6 lines front porch
+      0x03,                         //     3 lines back porch
+      10,                           //     10 ms delay
+    ST77XX_MADCTL,  1,              //  5: Mem access ctl (directions), 1 arg:
+      0x08,                         //     Row/col addr, bottom-top refresh
+    ST7735_DISSET5, 2,              //  6: Display settings #5, 2 args:
+      0x15,                         //     1 clk cycle nonoverlap, 2 cycle gate
+                                    //     rise, 3 cycle osc equalize
+      0x02,                         //     Fix on VTL
+    ST7735_INVCTR,  1,              //  7: Display inversion control, 1 arg:
+      0x0,                          //     Line inversion
+    ST7735_PWCTR1,  2+ST_CMD_DELAY, //  8: Power control, 2 args + delay:
+      0x02,                         //     GVDD = 4.7V
+      0x70,                         //     1.0uA
+      10,                           //     10 ms delay
+    ST7735_PWCTR2,  1,              //  9: Power control, 1 arg, no delay:
+      0x05,                         //     VGH = 14.7V, VGL = -7.35V
+    ST7735_PWCTR3,  2,              // 10: Power control, 2 args, no delay:
+      0x01,                         //     Opamp current small
+      0x02,                         //     Boost frequency
+    ST7735_VMCTR1,  2+ST_CMD_DELAY, // 11: Power control, 2 args + delay:
+      0x3C,                         //     VCOMH = 4V
+      0x38,                         //     VCOML = -1.1V
+      10,                           //     10 ms delay
+    ST7735_PWCTR6,  2,              // 12: Power control, 2 args, no delay:
+      0x11, 0x15,
+    ST7735_GMCTRP1,16,              // 13: Gamma Adjustments (pos. polarity), 16 args + delay:
+      0x09, 0x16, 0x09, 0x20,       //     (Not entirely necessary, but provides
+      0x21, 0x1B, 0x13, 0x19,       //      accurate colors)
+      0x17, 0x15, 0x1E, 0x2B,
+      0x04, 0x05, 0x02, 0x0E,
+    ST7735_GMCTRN1,16+ST_CMD_DELAY, // 14: Gamma Adjustments (neg. polarity), 16 args + delay:
+      0x0B, 0x14, 0x08, 0x1E,       //     (Not entirely necessary, but provides
+      0x22, 0x1D, 0x18, 0x1E,       //      accurate colors)
+      0x1B, 0x1A, 0x24, 0x2B,
+      0x06, 0x06, 0x02, 0x0F,
+      10,                           //     10 ms delay
+    ST77XX_CASET,   4,              // 15: Column addr set, 4 args, no delay:
+      0x00, 0x02,                   //     XSTART = 2
+      0x00, 0x81,                   //     XEND = 129
+    ST77XX_RASET,   4,              // 16: Row addr set, 4 args, no delay:
+      0x00, 0x02,                   //     XSTART = 1
+      0x00, 0x81,                   //     XEND = 160
+    ST77XX_NORON,     ST_CMD_DELAY, // 17: Normal display on, no args, w/delay
+      10,                           //     10 ms delay
+    ST77XX_DISPON,    ST_CMD_DELAY, // 18: Main screen turn on, no args, delay
+      255 },                        //     255 = max (500 ms) delay
+
+  Rcmd1[] = {                       // 7735R init, part 1 (red or green tab)
+    14,                             // 14 commands in list:
+    /*ST77XX_SWRESET,   ST_CMD_DELAY, //  1: Software reset, 0 args, w/delay
+      150,  */                        //     150 ms delay
+    ST77XX_SLPOUT,    ST_CMD_DELAY, //  2: Out of sleep mode, 0 args, w/delay
+      120,                          //     120 ms delay
+    ST7735_FRMCTR1, 3,              //  3: Framerate ctrl - normal mode, 3 arg:
+      0x01, 0x2C, 0x2D,             //     Rate = fosc/(1x2+40) * (LINE+2C+2D)
+    ST7735_FRMCTR2, 3,              //  4: Framerate ctrl - idle mode, 3 args:
+      0x01, 0x2C, 0x2D,             //     Rate = fosc/(1x2+40) * (LINE+2C+2D)
+    ST7735_FRMCTR3, 6,              //  5: Framerate - partial mode, 6 args:
+      0x01, 0x2C, 0x2D,             //     Dot inversion mode
+      0x01, 0x2C, 0x2D,             //     Line inversion mode
+    ST7735_INVCTR,  1,              //  6: Display inversion ctrl, 1 arg:
+      0x07,                         //     No inversion
+    ST7735_PWCTR1,  3,              //  7: Power control, 3 args, no delay:
+      0xA2,
+      0x02,                         //     -4.6V
+      0x84,                         //     AUTO mode
+    ST7735_PWCTR2,  1,              //  8: Power control, 1 arg, no delay:
+      0xC5,                         //     VGH25=2.4C VGSEL=-10 VGH=3 * AVDD
+    ST7735_PWCTR3,  2,              //  9: Power control, 2 args, no delay:
+      0x0A,                         //     Opamp current small
+      0x00,                         //     Boost frequency
+    ST7735_PWCTR4,  2,              // 10: Power control, 2 args, no delay:
+      0x8A,                         //     BCLK/2,
+      0x2A,                         //     opamp current small & medium low
+    ST7735_PWCTR5,  2,              // 11: Power control, 2 args, no delay:
+      0x8A, 0xEE,
+    ST7735_VMCTR1,  1,              // 12: Power control, 1 arg, no delay:
+      0x0E,
+    ST77XX_INVOFF,  0,              // 13: Don't invert display, no args
+    ST77XX_MADCTL,  1,              // 14: Mem access ctl (directions), 1 arg:
+      0xC8,                         //     row/col addr, bottom-top refresh
+    ST77XX_COLMOD,  1,              // 15: set color mode, 1 arg, no delay:
+      0x05 },                       //     16-bit color
+
+  Rcmd2green[] = {                  // 7735R init, part 2 (green tab only)
+    2,                              //  2 commands in list:
+    ST77XX_CASET,   4,              //  1: Column addr set, 4 args, no delay:
+      0x00, 0x02,                   //     XSTART = 0
+      0x00, 0x7F+0x02,              //     XEND = 127
+    ST77XX_RASET,   4,              //  2: Row addr set, 4 args, no delay:
+      0x00, 0x01,                   //     XSTART = 0
+      0x00, 0x9F+0x01 },            //     XEND = 159
+
+  Rcmd2red[] = {                    // 7735R init, part 2 (red tab only)
+    2,                              //  2 commands in list:
+    ST77XX_CASET,   4,              //  1: Column addr set, 4 args, no delay:
+      0x00, 0x00,                   //     XSTART = 0
+      0x00, 0x7F,                   //     XEND = 127
+    ST77XX_RASET,   4,              //  2: Row addr set, 4 args, no delay:
+      0x00, 0x00,                   //     XSTART = 0
+      0x00, 0x9F },                 //     XEND = 159
+
+  Rcmd2green144[] = {               // 7735R init, part 2 (green 1.44 tab)
+    2,                              //  2 commands in list:
+    ST77XX_CASET,   4,              //  1: Column addr set, 4 args, no delay:
+      0x00, 0x00,                   //     XSTART = 0
+      0x00, 0x7F,                   //     XEND = 127
+    ST77XX_RASET,   4,              //  2: Row addr set, 4 args, no delay:
+      0x00, 0x00,                   //     XSTART = 0
+      0x00, 0x7F },                 //     XEND = 127
+
+  Rcmd2green160x80[] = {            // 7735R init, part 2 (mini 160x80)
+    2,                              //  2 commands in list:
+    ST77XX_CASET,   4,              //  1: Column addr set, 4 args, no delay:
+      0x00, 0x00,                   //     XSTART = 0
+      0x00, 0x4F,                   //     XEND = 79
+    ST77XX_RASET,   4,              //  2: Row addr set, 4 args, no delay:
+      0x00, 0x00,                   //     XSTART = 0
+      0x00, 0x9F },                 //     XEND = 159
+
+  Rcmd2green160x80plugin[] = {      // 7735R init, part 2 (mini 160x80 with plugin FPC)
+    3,                              //  3 commands in list:
+    ST77XX_INVON,  0,              //   1: Display is inverted
+    ST77XX_CASET,   4,              //  2: Column addr set, 4 args, no delay:
+      0x00, 0x00,                   //     XSTART = 0
+      0x00, 0x4F,                   //     XEND = 79
+    ST77XX_RASET,   4,              //  3: Row addr set, 4 args, no delay:
+      0x00, 0x00,                   //     XSTART = 0
+      0x00, 0x9F },                 //     XEND = 159
+
+  Rcmd3[] = {                       // 7735R init, part 3 (red or green tab)
+    2,                              //  2 commands in list:
+    ST7735_GMCTRP1, 16      ,       //  1: Gamma Adjustments (pos. polarity), 16 args + delay:
+      0x02, 0x1c, 0x07, 0x12,       //     (Not entirely necessary, but provides
+      0x37, 0x32, 0x29, 0x2d,       //      accurate colors)
+      0x29, 0x25, 0x2B, 0x39,
+      0x00, 0x01, 0x03, 0x10,
+    ST7735_GMCTRN1, 16      ,       //  2: Gamma Adjustments (neg. polarity), 16 args + delay:
+      0x03, 0x1d, 0x07, 0x06,       //     (Not entirely necessary, but provides
+      0x2E, 0x2C, 0x29, 0x2D,       //      accurate colors)
+      0x2E, 0x2E, 0x37, 0x3F,
+      0x00, 0x00, 0x02, 0x10 };                        //     100 ms delay
+
+static int16_t _xstart = 0;          ///< Internal framebuffer X offset
+static int16_t _ystart = 0;          ///< Internal framebuffer Y offset
+static uint8_t _colstart = 0;   ///< Some displays need this changed to offset
+static uint8_t _rowstart = 0;       ///< Some displays need this changed to offset
+static uint8_t rotation = 0;
+static int16_t _width = 0;       ///< Display width as modified by current rotation
+static int16_t _height = 0;      ///< Display height as modified by current rotation
+
+static void set_CS(uint8_t level) {
+  //if (_cs != (uint8_t) -1) {
+    digitalWrite(PIN_TFT_CS, level);
+  //}
+}
+static void sendCommand(uint8_t com) {
+    set_CS(HIGH);
+    digitalWrite(PIN_TFT_DC, LOW);
+    set_CS(LOW);
+    _spi->beginTransaction(_spiSettings);
+    _spi->transfer(com);
+    _spi->endTransaction();
+    set_CS(HIGH);
+    digitalWrite(PIN_TFT_DC, HIGH);
+}
+    
+static void WriteData(uint8_t data) {
+    digitalWrite(PIN_TFT_CS, LOW);
+    _spi->beginTransaction(_spiSettings);
+    _spi->transfer(data);
+    _spi->endTransaction();
+    digitalWrite(PIN_TFT_CS, HIGH);
+}
+static void SPI_WRITE32(uint32_t l) {
+    _spi->transfer(l >> 24);
+    _spi->transfer(l >> 16);
+    _spi->transfer(l >> 8);
+    _spi->transfer(l);
+}
+static void writeCommand(uint8_t cmd) {
+    digitalWrite(PIN_TFT_DC, LOW);
+    _spi->transfer(cmd);
+    digitalWrite(PIN_TFT_DC, HIGH);
+}
+
+static void displayInit(const uint8_t *addr) {
+  uint8_t numCommands, cmd, numArgs;
+  uint16_t ms;
+
+  numCommands = pgm_read_byte(addr++); // Number of commands to follow
+  while (numCommands--) {              // For each command...
+    cmd = pgm_read_byte(addr++);       // Read command
+    numArgs = pgm_read_byte(addr++);   // Number of args to follow
+    ms = numArgs & ST_CMD_DELAY;       // If hibit set, delay follows args
+    numArgs &= ~ST_CMD_DELAY;          // Mask out delay bit
+    sendCommand(cmd);
+    for (int k = 0; k < numArgs; k++) {
+      WriteData(addr[k]);
+    }
+    addr += numArgs;
+
+    if (ms) {
+      ms = pgm_read_byte(addr++); // Read post-command delay time (ms)
+      if (ms == 255)
+        ms = 500; // If 255, delay for 500 ms
+      delay(ms);
+    }
+  }
+}
+
+static void setRotation(uint8_t m) {
+  uint8_t madctl = 0;
+
+  rotation = m & 3; // can't be higher than 3
+
+  switch (rotation) {
+  case 0:
+    madctl = ST77XX_MADCTL_MX | ST77XX_MADCTL_MY | ST7735_MADCTL_BGR;
+
+    _height = 160;
+    _width = 80;
+    _xstart = _colstart;
+    _ystart = _rowstart;
+    break;
+  case 1:
+    madctl = ST77XX_MADCTL_MY | ST77XX_MADCTL_MV | ST7735_MADCTL_BGR;
+
+    _width = 160;
+    _height = 80;
+    _ystart = _colstart;
+    _xstart = _rowstart;
+    break;
+  case 2:
+    madctl = ST7735_MADCTL_BGR;
+
+    _height = 160;
+    _width = 80;
+    _xstart = _colstart;
+    _ystart = _rowstart;
+    break;
+  case 3:
+    madctl = ST77XX_MADCTL_MX | ST77XX_MADCTL_MV | ST7735_MADCTL_BGR;
+
+    _width = 160;
+    _height = 80;
+    _ystart = _colstart;
+    _xstart = _rowstart;
+    break;
+  }
+
+  sendCommand(ST77XX_MADCTL);
+  WriteData(madctl);
+}
+
+static void setAddrWindow(uint16_t x, uint16_t y, uint16_t w, uint16_t h) {
+  x += _xstart;
+  y += _ystart;
+  uint32_t xa = ((uint32_t)x << 16) | (x + w - 1);
+  uint32_t ya = ((uint32_t)y << 16) | (y + h - 1);
+
+  writeCommand(ST77XX_CASET); // Column addr set
+  SPI_WRITE32(xa);
+
+  writeCommand(ST77XX_RASET); // Row addr set
+  SPI_WRITE32(ya);
+
+  writeCommand(ST77XX_RAMWR); // write to RAM
+}

 #define SCALE_X  1.25f     // 160 / 128
 #define SCALE_Y  1.25f      // 80 / 64

+static TFT_eSprite *sprite = NULL;
+
 bool ST7735Display::i2c_probe(TwoWire& wire, uint8_t addr) {
  return true;
 /*
@@ -16,53 +404,103 @@ bool ST7735Display::i2c_probe(TwoWire& wire, uint8_t addr) {
 */
 }

+#ifndef PIN_TFT_LEDA_CTL_ACTIVE
+  #define PIN_TFT_LEDA_CTL_ACTIVE  HIGH
+#endif
+
 bool ST7735Display::begin() {
+  if (!sprite) {
+    // alloc offscreen canvas
+    sprite = new TFT_eSprite(&lcd);
+    if (sprite) {
+      if (sprite->createSprite(160, 80)) {
+        sprite->fillScreen(ST77XX_BLACK);
+        sprite->setTextColor(curr_color = ST77XX_WHITE);
+      } else {
+        Serial.printf("ST7735Display: failed to alloc canvas pixels");
+      }
+    } else {
+      Serial.printf("ST7735Display: failed to alloc canvas");
+    }
+  }
+  
  if (!_isOn) {
    if (_peripher_power) _peripher_power->claim();

+    delay(100); // TEMP!!
+    pinMode(PIN_TFT_RST, OUTPUT);
+    pinMode(PIN_TFT_CS, OUTPUT);
+    pinMode(PIN_TFT_DC, OUTPUT);
    pinMode(PIN_TFT_LEDA_CTL, OUTPUT);
-#if defined(PIN_TFT_LEDA_CTL_ACTIVE)
-    digitalWrite(PIN_TFT_LEDA_CTL, PIN_TFT_LEDA_CTL_ACTIVE);
-#else
-    digitalWrite(PIN_TFT_LEDA_CTL, HIGH); 
-#endif
-    digitalWrite(PIN_TFT_RST, HIGH);

-#if defined(HELTEC_T1)
-    display.initR(INITR_MINI160x80);
-    display.setRotation(DISPLAY_ROTATION);
-#elif defined(HELTEC_TRACKER_V2) || defined(HELTEC_T096)
-    display.initR(INITR_MINI160x80);
-    display.setRotation(DISPLAY_ROTATION);
-    uint8_t madctl = ST77XX_MADCTL_MY | ST77XX_MADCTL_MV |ST7735_MADCTL_BGR;//Adjust color to BGR
-    display.sendCommand(ST77XX_MADCTL, &madctl, 1);
+#ifdef ESP_PLATFORM
+    _spi->begin(_clk,_miso,_mosi,-1);
 #else
-    display.initR(INITR_MINI160x80_PLUGIN);
-    display.setRotation(DISPLAY_ROTATION);
+    _spi->begin(); 
 #endif
-    display.setSPISpeed(40000000);
-    display.fillScreen(ST77XX_BLACK);
-    display.setTextColor(ST77XX_WHITE);
-    display.setTextSize(2); 
-    display.cp437(true);         // Use full 256 char 'Code Page 437' font
+    _spi->setClockDivider(SPI_CLOCK_DIV2);
+
+    _height = 80;
+    _width = 160;
+    _colstart = 24;
+    _rowstart = 0;
+
+    _resetAndInit();
+    
+    sendCommand(ST77XX_DISPON);
    
    _isOn = true;
  }
  return true;
 }

+void ST7735Display::_resetAndInit() {
+    // Pulse Reset low for 10ms
+    digitalWrite(PIN_TFT_RST, HIGH);
+    delay(2);
+    digitalWrite(PIN_TFT_RST, LOW);
+    delay(10);
+    digitalWrite(PIN_TFT_RST, HIGH);
+    delay(2);
+
+    // run init commands
+    displayInit(Rcmd1);
+#if defined(HELTEC_TRACKER_V2) || defined(HELTEC_T096)
+    displayInit(Rcmd2green160x80);
+    //uint8_t madctl = ST77XX_MADCTL_MY | ST77XX_MADCTL_MV |ST7735_MADCTL_BGR;//Adjust color to BGR
+    //display.sendCommand(ST77XX_MADCTL, &madctl, 1);
+#endif
+    displayInit(Rcmd3);
+    setRotation(DISPLAY_ROTATION);
+    
+    // clear the buffer before display on
+    sprite->fillScreen(ST77XX_BLACK);
+    endFrame();
+    
+    // turn on backlight
+    digitalWrite(PIN_TFT_LEDA_CTL, PIN_TFT_LEDA_CTL_ACTIVE);
+
+}
+
 void ST7735Display::turnOn() {
-  ST7735Display::begin();
+  if (!_isOn) {
+    if (_peripher_power) _peripher_power->claim();
+    _resetAndInit();
+    sendCommand(ST77XX_DISPON);
+
+    // Now turn on the backlight
+    // digitalWrite(PIN_TFT_LEDA_CTL, PIN_TFT_LEDA_CTL_ACTIVE);
+    _isOn = true;
+  }
 }

 void ST7735Display::turnOff() {
  if (_isOn) {
-    digitalWrite(PIN_TFT_RST, LOW);
-#if defined(PIN_TFT_LEDA_CTL_ACTIVE)
+    sendCommand(ST77XX_DISPOFF);
+
+    //digitalWrite(PIN_TFT_RST, LOW);
+    // Now turn off the backlight
    digitalWrite(PIN_TFT_LEDA_CTL, !PIN_TFT_LEDA_CTL_ACTIVE);
-#else
-    digitalWrite(PIN_TFT_LEDA_CTL, LOW); 
-#endif
    _isOn = false;

    if (_peripher_power) _peripher_power->release();
@@ -70,78 +508,90 @@ void ST7735Display::turnOff() {
 }

 void ST7735Display::clear() {
-  //Serial.println("DBG: display.Clear");
-  display.fillScreen(ST77XX_BLACK);
+  sprite->fillScreen(ST77XX_BLACK);
 }

 void ST7735Display::startFrame(Color bkg) {
-  display.fillScreen(0x00);
-  display.setTextColor(ST77XX_WHITE);
-  display.setTextSize(1);      // This one affects size of Please wait... message
-  display.cp437(true);         // Use full 256 char 'Code Page 437' font
+  sprite->fillScreen(ST77XX_BLACK);
+  sprite->setTextColor(curr_color = ST77XX_WHITE);
+  sprite->setFreeFont();
+  sprite->setTextSize(1);      // This one affects size of Please wait... message
+  //sprite->cp437(true);         // Use full 256 char 'Code Page 437' font
 }

 void ST7735Display::setTextSize(int sz) {
-  display.setTextSize(sz);
+  sprite->setTextSize(sz);
 }

 void ST7735Display::setColor(Color c) {
  switch (c) {
    case DisplayDriver::DARK :
-      _color = ST77XX_BLACK;
+      curr_color = ST77XX_BLACK;
      break;
    case DisplayDriver::LIGHT : 
-      _color = ST77XX_WHITE;
+      curr_color = ST77XX_WHITE;
      break;
    case DisplayDriver::RED : 
-      _color = ST77XX_RED;
+      curr_color = ST77XX_RED;
      break;
    case DisplayDriver::GREEN : 
-      _color = ST77XX_GREEN;
+      curr_color = ST77XX_GREEN;
      break;
    case DisplayDriver::BLUE : 
-      _color = ST77XX_BLUE;
+      curr_color = ST77XX_BLUE;
      break;
    case DisplayDriver::YELLOW : 
-      _color = ST77XX_YELLOW;
+      curr_color = ST77XX_YELLOW;
      break;
    case DisplayDriver::ORANGE : 
-      _color = ST77XX_ORANGE;
+      curr_color = ST77XX_ORANGE;
      break;
    default:
-      _color = ST77XX_WHITE;
+      curr_color = ST77XX_WHITE;
      break;
  }
-  display.setTextColor(_color);
+  sprite->setTextColor(curr_color);
 }

 void ST7735Display::setCursor(int x, int y) {
-  display.setCursor(x*SCALE_X, y*SCALE_Y);
+  sprite->setCursor(x*SCALE_X, y*SCALE_Y);
 }

 void ST7735Display::print(const char* str) {
-  display.print(str);
+  sprite->print(str);
 }

 void ST7735Display::fillRect(int x, int y, int w, int h) {
-  display.fillRect(x*SCALE_X, y*SCALE_Y, w*SCALE_X, h*SCALE_Y, _color);
+  sprite->fillRect(x*SCALE_X, y*SCALE_Y, w*SCALE_X, h*SCALE_Y, curr_color);
 }

 void ST7735Display::drawRect(int x, int y, int w, int h) {
-  display.drawRect(x*SCALE_X, y*SCALE_Y, w*SCALE_X, h*SCALE_Y, _color);
+  sprite->drawRect(x*SCALE_X, y*SCALE_Y, w*SCALE_X, h*SCALE_Y, curr_color);
 }

 void ST7735Display::drawXbm(int x, int y, const uint8_t* bits, int w, int h) {
-  display.drawBitmap(x*SCALE_X, y*SCALE_Y, bits, w, h, _color);
+  sprite->drawBitmap(x*SCALE_X, y*SCALE_Y, bits, w, h, curr_color);
 }

 uint16_t ST7735Display::getTextWidth(const char* str) {
-  int16_t x1, y1;
-  uint16_t w, h;
-  display.getTextBounds(str, 0, 0, &x1, &y1, &w, &h);
-  return w / SCALE_X;
+  return sprite->textWidth(str) / SCALE_X;
 }

 void ST7735Display::endFrame() {
-  // display.display();
+  // blit the canvas buffer to LCD
+  set_CS(LOW);
+  _spi->beginTransaction(_spiSettings);
+  uint16_t x, y;
+  uint16_t* pixels = (uint16_t *) ((TFT_eSprite *) sprite)->getPointer();
+  for (y = 0; y < 80; y++, pixels += 160) {
+    setAddrWindow(0, y, 160, 1);
+#ifdef ESP_PLATFORM
+    _spi->transferBytes((uint8_t *)pixels, NULL, 2 * 160);
+#else
+    _spi->transfer(pixels, NULL, 2 * 160);
+#endif
+  }
+
+  _spi->endTransaction();
+  set_CS(HIGH);
 }
@@ -3,28 +3,25 @@
 #include "DisplayDriver.h"
 #include <Wire.h>
 #include <SPI.h>
-#include <Adafruit_GFX.h>
-#include <Adafruit_ST7735.h>
+#include "TFT_eSPI.h"
 #include <helpers/RefCountedDigitalPin.h>

 class ST7735Display : public DisplayDriver {
-  Adafruit_ST7735 display;
  bool _isOn;
-  uint16_t _color;
  RefCountedDigitalPin* _peripher_power;

  bool i2c_probe(TwoWire& wire, uint8_t addr);
 public:
 #ifdef USE_PIN_TFT
  ST7735Display(RefCountedDigitalPin* peripher_power=NULL) : DisplayDriver(128, 64), 
-      display(PIN_TFT_CS, PIN_TFT_DC, PIN_TFT_SDA, PIN_TFT_SCL, PIN_TFT_RST),
+    //  display(PIN_TFT_CS, PIN_TFT_DC, PIN_TFT_SDA, PIN_TFT_SCL, PIN_TFT_RST),
      _peripher_power(peripher_power)
  {
    _isOn = false;
  }
 #else
  ST7735Display(RefCountedDigitalPin* peripher_power=NULL) : DisplayDriver(128, 64),
-      display(&SPI1, PIN_TFT_CS, PIN_TFT_DC, PIN_TFT_RST),
+    //  display(&SPI1, PIN_TFT_CS, PIN_TFT_DC, PIN_TFT_RST),
      _peripher_power(peripher_power)
  {
    _isOn = false;
@@ -46,4 +43,7 @@ public:
  void drawXbm(int x, int y, const uint8_t* bits, int w, int h) override;
  uint16_t getTextWidth(const char* str) override;
  void endFrame() override;
+
+protected:
+  void _resetAndInit();
 };
@@ -3,12 +3,33 @@
 #include <stdint.h>
 #include <stddef.h>

-// Mock SHA256 class for testing
-// Provides minimal interface to allow Utils.cpp to compile
+// Mock SHA256 for native testing — deterministic but not cryptographic.
+// finalize() writes real (non-garbage) output so calculatePacketHash() produces
+// distinguishable results for packets with different payloads.
+#include <string.h>
+
 class SHA256 {
+  uint8_t _state[32];
+  size_t _len;
 public:
-  void update(const uint8_t* data, size_t len) {}
-  void finalize(uint8_t* hash, size_t hashLen) {}
+  SHA256() : _len(0) { memset(_state, 0, sizeof(_state)); }
+
+  void update(const void* data, size_t len) {
+    const uint8_t* bytes = static_cast<const uint8_t*>(data);
+    for (size_t i = 0; i < len; i++) {
+      uint8_t b = bytes[i];
+      _state[_len % 32] ^= b;
+      _state[(_len + 1) % 32] += (uint8_t)((b >> 1) | (b << 7));
+      _len++;
+    }
+  }
+
+  void finalize(uint8_t* hash, size_t hashLen) {
+    for (size_t i = 0; i < hashLen; i++) {
+      hash[i] = _state[i % 32];
+    }
+  }
+
  void resetHMAC(const uint8_t* key, size_t keyLen) {}
  void finalizeHMAC(const uint8_t* key, size_t keyLen, uint8_t* hash, size_t hashLen) {}
 };
@@ -0,0 +1,103 @@
+#include <gtest/gtest.h>
+#include "helpers/SimpleMeshTables.h"
+
+using namespace mesh;
+
+// Build a packet that calculatePacketHash() distinguishes by payload content.
+// header selects ROUTE_TYPE_FLOOD so isRouteDirect() returns false.
+static Packet makeFloodPacket(uint8_t seed) {
+    Packet p;
+    p.header = ROUTE_TYPE_FLOOD | (PAYLOAD_TYPE_ACK << PH_TYPE_SHIFT);
+    p.payload[0] = seed;
+    p.payload_len = 1;
+    p.path_len = 0;
+    return p;
+}
+
+static Packet makeDirectPacket(uint8_t seed) {
+    Packet p;
+    p.header = ROUTE_TYPE_DIRECT | (PAYLOAD_TYPE_ACK << PH_TYPE_SHIFT);
+    p.payload[0] = seed;
+    p.payload_len = 1;
+    p.path_len = 0;
+    return p;
+}
+
+// ── wasSeen: pure query ───────────────────────────────────────────────────────
+
+TEST(SimpleMeshTables, WasSeen_ReturnsFalseForUnseen) {
+    SimpleMeshTables t;
+    Packet p = makeFloodPacket(0x01);
+    EXPECT_FALSE(t.wasSeen(&p));
+}
+
+// wasSeen shouldn't change state
+TEST(SimpleMeshTables, WasSeen_IsPureQuery_DoesNotInsert) {
+    SimpleMeshTables t;
+    Packet p = makeFloodPacket(0x01);
+    EXPECT_FALSE(t.wasSeen(&p));
+    EXPECT_FALSE(t.wasSeen(&p));
+}
+
+// ── markSeen + wasSeen ───────────────────────────────────────────────────────
+
+TEST(SimpleMeshTables, MarkSeen_MakesWasSeenReturnTrue) {
+    SimpleMeshTables t;
+    Packet p = makeFloodPacket(0x01);
+    t.markSeen(&p);
+    EXPECT_TRUE(t.wasSeen(&p));
+}
+
+TEST(SimpleMeshTables, MarkSeen_DoesNotAffectOtherPackets) {
+    SimpleMeshTables t;
+    Packet p1 = makeFloodPacket(0x01);
+    Packet p2 = makeFloodPacket(0x02);
+    t.markSeen(&p1);
+    EXPECT_FALSE(t.wasSeen(&p2));
+}
+
+// Canonical pattern used at every onRecvPacket call site:
+//   if (!wasSeen(pkt)) { markSeen(pkt); process(pkt); }
+TEST(SimpleMeshTables, QueryThenMark_WorksCorrectly) {
+    SimpleMeshTables t;
+    Packet p = makeFloodPacket(0x01);
+    EXPECT_FALSE(t.wasSeen(&p));
+    t.markSeen(&p);
+    EXPECT_TRUE(t.wasSeen(&p));
+}
+
+// ── dup stats ────────────────────────────────────────────────────────────────
+
+TEST(SimpleMeshTables, WasSeen_IncrementsFloodDupStat) {
+    SimpleMeshTables t;
+    Packet p = makeFloodPacket(0x01);
+    t.markSeen(&p);
+    t.wasSeen(&p);
+    EXPECT_EQ(1u, t.getNumFloodDups());
+    EXPECT_EQ(0u, t.getNumDirectDups());
+}
+
+TEST(SimpleMeshTables, WasSeen_IncrementsDirectDupStat) {
+    SimpleMeshTables t;
+    Packet p = makeDirectPacket(0x01);
+    t.markSeen(&p);
+    t.wasSeen(&p);
+    EXPECT_EQ(0u, t.getNumFloodDups());
+    EXPECT_EQ(1u, t.getNumDirectDups());
+}
+
+// ── clear ────────────────────────────────────────────────────────────────────
+
+TEST(SimpleMeshTables, Clear_RemovesSeenPacket) {
+    SimpleMeshTables t;
+    Packet p = makeFloodPacket(0x01);
+    t.markSeen(&p);
+    ASSERT_TRUE(t.wasSeen(&p));
+    t.clear(&p);
+    EXPECT_FALSE(t.wasSeen(&p));
+}
+
+int main(int argc, char** argv) {
+    ::testing::InitGoogleTest(&argc, argv);
+    return RUN_ALL_TESTS();
+}
@@ -1,7 +1,6 @@
 [Heltec_mesh_solar]
 extends = nrf52_base
 board = heltec_mesh_solar
-platform_packages = framework-arduinoadafruitnrf52
 board_build.ldscript = boards/nrf52840_s140_v6.ld
 build_flags =  ${nrf52_base.build_flags}
  -I src/helpers/nrf52
@@ -12,8 +12,9 @@ class LoRaFEMControl
    void setRxModeEnable(void);
    void setRxModeEnableWhenMCUSleep(void);
    void setLNAEnable(bool enabled);
-    bool isLnaCanControl(void) { return lna_can_control; }
+    bool isLnaCanControl(void) const { return lna_can_control; }
    void setLnaCanControl(bool can_control) { lna_can_control = can_control; }
+    bool isLNAEnabled(void) const { return lna_enabled; }

  private:
    bool lna_enabled = false;
@@ -123,4 +123,22 @@ void T096Board::powerOff() {

 const char* T096Board::getManufacturerName() const {
  return "Heltec T096";
-}
+}
+
+bool T096Board::setLoRaFemLnaEnabled(bool enable) {
+  if (!loRaFEMControl.isLnaCanControl()) {
+    return false;
+  }
+
+  loRaFEMControl.setLNAEnable(enable);
+  loRaFEMControl.setRxModeEnable();
+  return true;
+}
+
+bool T096Board::canControlLoRaFemLna() const {
+  return loRaFEMControl.isLnaCanControl();
+}
+
+bool T096Board::isLoRaFemLnaEnabled() const {
+  return loRaFEMControl.isLNAEnabled();
+}
@@ -25,4 +25,7 @@ public:
  uint16_t getBattMilliVolts() override;
  const char* getManufacturerName() const override ;
  void powerOff() override;
+  bool setLoRaFemLnaEnabled(bool enable) override;
+  bool canControlLoRaFemLna() const override;
+  bool isLoRaFemLnaEnabled() const override;
 };
@@ -51,7 +51,7 @@ build_src_filter = ${nrf52_base.build_src_filter}
 lib_deps =
  ${nrf52_base.lib_deps}
  ${sensor_base.lib_deps}
-  adafruit/Adafruit ST7735 and ST7789 Library @ ^1.11.0
+  bodmer/TFT_eSPI @ ^2.4.31
 debug_tool = jlink
 upload_protocol = nrfutil

@@ -22,7 +22,7 @@ AutoDiscoverRTCClock rtc_clock(fallback_clock);

 #if ENV_INCLUDE_GPS
 #include <helpers/sensors/MicroNMEALocationProvider.h>
-MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1);
+MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1, &rtc_clock);
 EnvironmentSensorManager sensors = EnvironmentSensorManager(nmea);
 #else
 EnvironmentSensorManager sensors;
@@ -0,0 +1,103 @@
+#include "HeltecTowerV2Board.h"
+
+#include <Arduino.h>
+#include <Wire.h>
+
+extern void variant_shutdown();
+
+#ifdef NRF52_POWER_MANAGEMENT
+const PowerMgtConfig power_config = {
+  .lpcomp_ain_channel = PWRMGT_LPCOMP_AIN,
+  .lpcomp_refsel = PWRMGT_LPCOMP_REFSEL,
+  .voltage_bootlock = PWRMGT_VOLTAGE_BOOTLOCK
+};
+
+void HeltecTowerV2Board::initiateShutdown(uint8_t reason) {
+  pinMode(PIN_GPS_EN, OUTPUT);
+  digitalWrite(PIN_GPS_EN, !PIN_GPS_EN_ACTIVE);
+  pinMode(PIN_GPS_STANDBY, OUTPUT);
+  digitalWrite(PIN_GPS_STANDBY, LOW);
+  pinMode(PIN_GPS_RESET, OUTPUT);
+  digitalWrite(PIN_GPS_RESET, GPS_RESET_MODE);
+  loRaFEMControl.setSleepModeEnable();
+
+  bool enable_lpcomp = (reason == SHUTDOWN_REASON_LOW_VOLTAGE ||
+                        reason == SHUTDOWN_REASON_BOOT_PROTECT);
+  pinMode(PIN_BAT_CTL, OUTPUT);
+  digitalWrite(PIN_BAT_CTL, enable_lpcomp ? HIGH : LOW);
+
+  if (enable_lpcomp) {
+    configureVoltageWake(power_config.lpcomp_ain_channel, power_config.lpcomp_refsel);
+  }
+
+  variant_shutdown();
+  enterSystemOff(reason);
+}
+#endif
+
+void HeltecTowerV2Board::begin() {
+  NRF52Board::begin();
+
+  pinMode(P_LORA_TX_LED, OUTPUT);
+  digitalWrite(P_LORA_TX_LED, !LED_STATE_ON);
+
+  pinMode(PIN_BAT_CTL, OUTPUT);
+  digitalWrite(PIN_BAT_CTL, LOW);
+
+#ifdef NRF52_POWER_MANAGEMENT
+  checkBootVoltage(&power_config);
+#endif
+
+  Wire.setPins(PIN_BOARD_SDA, PIN_BOARD_SCL);
+  Wire.begin();
+
+  pinMode(PIN_GPS_EN, OUTPUT);
+  digitalWrite(PIN_GPS_EN, !PIN_GPS_EN_ACTIVE);
+  pinMode(PIN_GPS_RESET, OUTPUT);
+  digitalWrite(PIN_GPS_RESET, GPS_RESET_MODE);
+  pinMode(PIN_GPS_STANDBY, OUTPUT);
+  digitalWrite(PIN_GPS_STANDBY, HIGH);
+  loRaFEMControl.init();
+}
+
+void HeltecTowerV2Board::onBeforeTransmit() {
+  digitalWrite(P_LORA_TX_LED, LED_STATE_ON);
+  loRaFEMControl.setTxModeEnable();
+}
+
+void HeltecTowerV2Board::onAfterTransmit() {
+  digitalWrite(P_LORA_TX_LED, !LED_STATE_ON);
+  loRaFEMControl.setRxModeEnable();
+}
+
+uint16_t HeltecTowerV2Board::getBattMilliVolts() {
+  analogReadResolution(12);
+  analogReference(VBAT_AR_INTERNAL);
+  pinMode(PIN_VBAT_READ, INPUT);
+  pinMode(PIN_BAT_CTL, OUTPUT);
+  digitalWrite(PIN_BAT_CTL, HIGH);
+
+  delay(10);
+  int adcvalue = analogRead(PIN_VBAT_READ);
+  digitalWrite(PIN_BAT_CTL, LOW);
+
+  return (uint16_t)((float)adcvalue * MV_LSB * ADC_MULTIPLIER);
+}
+
+const char* HeltecTowerV2Board::getManufacturerName() const {
+  return "Heltec Tower V2";
+}
+
+void HeltecTowerV2Board::powerOff() {
+  pinMode(PIN_GPS_EN, OUTPUT);
+  digitalWrite(PIN_GPS_EN, !PIN_GPS_EN_ACTIVE);
+  pinMode(PIN_GPS_STANDBY, OUTPUT);
+  digitalWrite(PIN_GPS_STANDBY, LOW);
+  pinMode(PIN_GPS_RESET, OUTPUT);
+  digitalWrite(PIN_GPS_RESET, GPS_RESET_MODE);
+  loRaFEMControl.setSleepModeEnable();
+  pinMode(PIN_BAT_CTL, OUTPUT);
+  digitalWrite(PIN_BAT_CTL, LOW);
+  variant_shutdown();
+  sd_power_system_off();
+}
@@ -0,0 +1,24 @@
+#pragma once
+
+#include <Arduino.h>
+#include <MeshCore.h>
+#include <helpers/NRF52Board.h>
+#include "LoRaFEMControl.h"
+
+class HeltecTowerV2Board : public NRF52BoardDCDC {
+protected:
+#ifdef NRF52_POWER_MANAGEMENT
+  void initiateShutdown(uint8_t reason) override;
+#endif
+
+public:
+  LoRaFEMControl loRaFEMControl;
+
+  HeltecTowerV2Board() : NRF52Board("TOWER_V2_OTA") {}
+  void begin();
+  void onBeforeTransmit() override;
+  void onAfterTransmit() override;
+  uint16_t getBattMilliVolts() override;
+  const char* getManufacturerName() const override;
+  void powerOff() override;
+};
@@ -0,0 +1,40 @@
+#include "LoRaFEMControl.h"
+
+#include <Arduino.h>
+#include "variant.h"
+
+static void enableFEMPower() {
+  bool wasOff = digitalRead(LORA_KCT8103L_EN) != HIGH;
+  digitalWrite(LORA_KCT8103L_EN, HIGH);
+  if (wasOff) {
+    delay(5);
+  }
+}
+
+void LoRaFEMControl::init() {
+  pinMode(LORA_KCT8103L_EN, OUTPUT);
+  digitalWrite(LORA_KCT8103L_EN, HIGH);
+  delay(1);
+  pinMode(LORA_KCT8103L_TX_RX, OUTPUT);
+  digitalWrite(LORA_KCT8103L_TX_RX, LOW);
+}
+
+void LoRaFEMControl::setSleepModeEnable() {
+  pinMode(LORA_KCT8103L_EN, OUTPUT);
+  digitalWrite(LORA_KCT8103L_EN, LOW);
+}
+
+void LoRaFEMControl::setTxModeEnable() {
+  enableFEMPower();
+  digitalWrite(LORA_KCT8103L_TX_RX, HIGH);
+}
+
+void LoRaFEMControl::setRxModeEnable() {
+  enableFEMPower();
+  digitalWrite(LORA_KCT8103L_TX_RX, LOW);
+}
+
+void LoRaFEMControl::setRxModeEnableWhenMCUSleep() {
+  enableFEMPower();
+  digitalWrite(LORA_KCT8103L_TX_RX, LOW);
+}
@@ -0,0 +1,13 @@
+#pragma once
+
+class LoRaFEMControl {
+public:
+  LoRaFEMControl() {}
+  virtual ~LoRaFEMControl() {}
+
+  void init();
+  void setSleepModeEnable();
+  void setTxModeEnable();
+  void setRxModeEnable();
+  void setRxModeEnableWhenMCUSleep();
+};
@@ -0,0 +1,104 @@
+[Heltec_tower_v2]
+extends = nrf52_base
+board = heltec_tower_v2
+board_build.ldscript = boards/nrf52840_s140_v6.ld
+build_flags = ${nrf52_base.build_flags}
+  -D ENV_INCLUDE_GPS=1
+  -I lib/nrf52/s140_nrf52_6.1.1_API/include
+  -I lib/nrf52/s140_nrf52_6.1.1_API/include/nrf52
+  -I variants/heltec_tower_v2
+  -D HELTEC_TOWER_V2
+  -D NRF52_POWER_MANAGEMENT
+  -D RADIO_CLASS=CustomSX1262
+  -D WRAPPER_CLASS=CustomSX1262Wrapper
+  -D LORA_TX_POWER=12
+  -D MAX_LORA_TX_POWER=22 ; Max SX1262 output -> ~29dBm at antenna
+  -D SX126X_CURRENT_LIMIT=140
+  -D SX126X_RX_BOOSTED_GAIN=1
+build_src_filter = ${nrf52_base.build_src_filter}
+  +<helpers/*.cpp>
+  +<helpers/sensors>
+  +<../variants/heltec_tower_v2>
+lib_deps =
+  ${nrf52_base.lib_deps}
+  stevemarple/MicroNMEA @ ^2.0.6
+debug_tool = jlink
+upload_protocol = nrfutil
+
+[env:Heltec_tower_v2_repeater]
+extends = Heltec_tower_v2
+build_src_filter = ${Heltec_tower_v2.build_src_filter}
+  +<../examples/simple_repeater>
+build_flags =
+  ${Heltec_tower_v2.build_flags}
+  -D ADVERT_NAME='"Heltec_Tower_V2 Repeater"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D MAX_NEIGHBOURS=50
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+
+[env:Heltec_tower_v2_room_server]
+extends = Heltec_tower_v2
+build_src_filter = ${Heltec_tower_v2.build_src_filter}
+  +<../examples/simple_room_server>
+build_flags =
+  ${Heltec_tower_v2.build_flags}
+  -D ADVERT_NAME='"Heltec_Tower_V2 Room"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D ROOM_PASSWORD='"hello"'
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+
+[env:Heltec_tower_v2_companion_radio_ble]
+extends = Heltec_tower_v2
+board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld
+board_upload.maximum_size = 712704
+build_flags =
+  ${Heltec_tower_v2.build_flags}
+  -I examples/companion_radio/ui-new
+  -D DISPLAY_CLASS=NullDisplayDriver
+  -D MAX_CONTACTS=350
+  -D MAX_GROUP_CHANNELS=40
+  -D BLE_PIN_CODE=123456
+;  -D BLE_DEBUG_LOGGING=1
+  -D OFFLINE_QUEUE_SIZE=256
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${Heltec_tower_v2.build_src_filter}
+  +<helpers/nrf52/SerialBLEInterface.cpp>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
+lib_deps =
+  ${Heltec_tower_v2.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+
+[env:Heltec_tower_v2_companion_radio_usb]
+extends = Heltec_tower_v2
+board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld
+board_upload.maximum_size = 712704
+build_flags =
+  ${Heltec_tower_v2.build_flags}
+  -I examples/companion_radio/ui-new
+  -D DISPLAY_CLASS=NullDisplayDriver
+  -D MAX_CONTACTS=350
+  -D MAX_GROUP_CHANNELS=40
+;  -D BLE_PIN_CODE=123456
+;  -D BLE_DEBUG_LOGGING=1
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${Heltec_tower_v2.build_src_filter}
+  +<helpers/nrf52/*.cpp>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
+lib_deps =
+  ${Heltec_tower_v2.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+
+[env:Heltec_tower_v2_kiss_modem]
+extends = Heltec_tower_v2
+build_src_filter = ${Heltec_tower_v2.build_src_filter}
+  +<../examples/kiss_modem/>
@@ -0,0 +1,31 @@
+#include "target.h"
+
+#include <Arduino.h>
+#include <helpers/ArduinoHelpers.h>
+#include <helpers/sensors/MicroNMEALocationProvider.h>
+
+HeltecTowerV2Board board;
+
+RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, SPI);
+
+WRAPPER_CLASS radio_driver(radio, board);
+
+VolatileRTCClock fallback_clock;
+AutoDiscoverRTCClock rtc_clock(fallback_clock);
+MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1, &rtc_clock);
+EnvironmentSensorManager sensors = EnvironmentSensorManager(nmea);
+
+#ifdef DISPLAY_CLASS
+DISPLAY_CLASS display;
+MomentaryButton user_btn(PIN_USER_BTN, 1000, true);
+#endif
+
+bool radio_init() {
+  rtc_clock.begin(Wire);
+  return radio.std_init(&SPI);
+}
+
+mesh::LocalIdentity radio_new_identity() {
+  RadioNoiseListener rng(radio);
+  return mesh::LocalIdentity(&rng);
+}
@@ -0,0 +1,28 @@
+#pragma once
+
+#define RADIOLIB_STATIC_ONLY 1
+#include <RadioLib.h>
+#include <HeltecTowerV2Board.h>
+#include <helpers/AutoDiscoverRTCClock.h>
+#include <helpers/radiolib/CustomSX1262Wrapper.h>
+#include <helpers/radiolib/RadioLibWrappers.h>
+#include <helpers/sensors/EnvironmentSensorManager.h>
+#include <helpers/sensors/LocationProvider.h>
+
+#ifdef DISPLAY_CLASS
+#include <helpers/ui/MomentaryButton.h>
+#include "helpers/ui/NullDisplayDriver.h"
+#endif
+
+extern HeltecTowerV2Board board;
+extern WRAPPER_CLASS radio_driver;
+extern AutoDiscoverRTCClock rtc_clock;
+extern EnvironmentSensorManager sensors;
+
+#ifdef DISPLAY_CLASS
+extern DISPLAY_CLASS display;
+extern MomentaryButton user_btn;
+#endif
+
+bool radio_init();
+mesh::LocalIdentity radio_new_identity();
@@ -0,0 +1,42 @@
+#include "variant.h"
+
+#include "Arduino.h"
+#include "nrf.h"
+#include "wiring_constants.h"
+#include "wiring_digital.h"
+
+const uint32_t g_ADigitalPinMap[] = {
+  0xff, 0xff, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13,
+  14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26,
+  27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39,
+  40, 41, 42, 43, 44, 45, 46, 47
+};
+
+void initVariant()
+{
+
+}
+
+void variant_shutdown()
+{
+  nrf_gpio_cfg_default(PIN_GPS_EN);
+  nrf_gpio_cfg_default(PIN_GPS_PPS);
+  nrf_gpio_cfg_default(PIN_GPS_RESET);
+  nrf_gpio_cfg_default(PIN_GPS_STANDBY);
+  nrf_gpio_cfg_default(GPS_RX_PIN);
+  nrf_gpio_cfg_default(GPS_TX_PIN);
+  pinMode(LORA_KCT8103L_EN, OUTPUT);
+  digitalWrite(LORA_KCT8103L_EN, LOW);
+  nrf_gpio_cfg_default(LORA_KCT8103L_TX_RX);
+  nrf_gpio_cfg_default(RF_PA_DETECT_PIN);
+  nrf_gpio_cfg_default(SX126X_CS);
+  nrf_gpio_cfg_default(SX126X_DIO1);
+  nrf_gpio_cfg_default(SX126X_BUSY);
+  nrf_gpio_cfg_default(SX126X_RESET);
+  nrf_gpio_cfg_default(PIN_SPI_MISO);
+  nrf_gpio_cfg_default(PIN_SPI_MOSI);
+  nrf_gpio_cfg_default(PIN_SPI_SCK);
+  nrf_gpio_cfg_default(PIN_LED);
+  detachInterrupt(PIN_GPS_PPS);
+  detachInterrupt(PIN_BUTTON1);
+}
@@ -0,0 +1,108 @@
+#pragma once
+
+#include "WVariant.h"
+
+#define USE_LFXO
+#define VARIANT_MCK (64000000ul)
+
+#define PINS_COUNT        (48)
+#define NUM_DIGITAL_PINS  (48)
+#define NUM_ANALOG_INPUTS (1)
+#define NUM_ANALOG_OUTPUTS (0)
+
+#define WIRE_INTERFACES_COUNT (1)
+#define PIN_WIRE_SDA (0 + 30)
+#define PIN_WIRE_SCL (0 + 5)
+#define PIN_BOARD_SDA PIN_WIRE_SDA
+#define PIN_BOARD_SCL PIN_WIRE_SCL
+
+#define SPI_INTERFACES_COUNT (1)
+#define PIN_SPI_MISO (0 + 23)
+#define PIN_SPI_MOSI (0 + 22)
+#define PIN_SPI_SCK  (0 + 19)
+#define PIN_SPI_NSS  LORA_CS
+
+#define LED_BUILTIN (32 + 15)
+#define PIN_LED     LED_BUILTIN
+#define LED_RED     (-1)
+#define LED_GREEN   (-1)
+#define LED_BLUE    (-1)
+#define LED_PIN     (-1)
+#define P_LORA_TX_LED LED_BUILTIN
+#define LED_STATE_ON LOW
+
+#define PIN_BUTTON1  (32 + 10)
+#define BUTTON_PIN   PIN_BUTTON1
+#define PIN_USER_BTN BUTTON_PIN
+
+#define USE_SX1262
+#define SX126X_CS    (0 + 24)
+#define LORA_CS      SX126X_CS
+#define SX126X_DIO1  (0 + 20)
+#define SX126X_BUSY  (0 + 17)
+#define SX126X_RESET (0 + 25)
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+
+#define P_LORA_NSS   LORA_CS
+#define P_LORA_DIO_1 SX126X_DIO1
+#define P_LORA_BUSY  SX126X_BUSY
+#define P_LORA_RESET SX126X_RESET
+#define P_LORA_MISO  PIN_SPI_MISO
+#define P_LORA_MOSI  PIN_SPI_MOSI
+#define P_LORA_SCLK  PIN_SPI_SCK
+
+#define USE_KCT8103L_PA_ONLY
+#define LORA_KCT8103L_EN      (0 + 15)
+#define LORA_KCT8103L_TX_RX   (0 + 16)
+#define LORA_PA_POWER         LORA_KCT8103L_EN
+#define RF_PA_DETECT_PIN      (0 + 13)
+#define RF_PA_HIGH_POWER_VALUE HIGH
+
+#define GPS_L76K
+#define GPS_RESET_MODE LOW
+#define PIN_GPS_RESET (32 + 6)
+#define PIN_GPS_RESET_ACTIVE GPS_RESET_MODE
+#define PIN_GPS_EN (0 + 7)
+#define PIN_GPS_EN_ACTIVE LOW
+#define GPS_EN_ACTIVE PIN_GPS_EN_ACTIVE
+#define PIN_GPS_STANDBY (32 + 2)
+#define PIN_GPS_PPS (32 + 4)
+#define GPS_BAUD_RATE 9600
+
+// Upstream names are from the GPS perspective. MeshCore's PIN_GPS_TX is the
+// CPU RX pin because EnvironmentSensorManager passes it as Serial1 RX.
+#define GPS_TX_PIN (32 + 7)
+#define GPS_RX_PIN (32 + 5)
+#define PIN_GPS_TX GPS_RX_PIN
+#define PIN_GPS_RX GPS_TX_PIN
+
+#define PIN_SERIAL1_RX PIN_GPS_TX
+#define PIN_SERIAL1_TX PIN_GPS_RX
+#define PIN_SERIAL2_RX (-1)
+#define PIN_SERIAL2_TX (-1)
+
+#define HAS_HARDWARE_WATCHDOG
+#define HARDWARE_WATCHDOG_DONE (0 + 9)
+#define HARDWARE_WATCHDOG_WAKE (0 + 10)
+#define HARDWARE_WATCHDOG_TIMEOUT_MS (8 * 60 * 1000)
+
+#define SERIAL_PRINT_PORT 0
+
+#define PIN_BAT_CTL (0 + 21)
+#define ADC_CTRL PIN_BAT_CTL
+#define ADC_CTRL_ENABLED HIGH
+#define BATTERY_PIN (0 + 4)
+#define PIN_VBAT_READ BATTERY_PIN
+#define ADC_RESOLUTION 14
+#define BATTERY_SENSE_RESOLUTION_BITS 12
+#define BATTERY_SENSE_RESOLUTION 4096.0
+#define AREF_VOLTAGE 3.0
+#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
+#define ADC_MULTIPLIER (4.916F)
+#define MV_LSB (3000.0F / 4096.0F)
+
+#define NRF52_POWER_MANAGEMENT
+#define PWRMGT_VOLTAGE_BOOTLOCK 3100
+#define PWRMGT_LPCOMP_AIN 2
+#define PWRMGT_LPCOMP_REFSEL 1
@@ -82,3 +82,21 @@ void HeltecTrackerV2Board::begin() {
  const char* HeltecTrackerV2Board::getManufacturerName() const {
    return "Heltec Tracker V2";
  }
+
+  bool HeltecTrackerV2Board::setLoRaFemLnaEnabled(bool enable) {
+    if (!loRaFEMControl.isLnaCanControl()) {
+      return false;
+    }
+
+    loRaFEMControl.setLNAEnable(enable);
+    loRaFEMControl.setRxModeEnable();
+    return true;
+  }
+
+  bool HeltecTrackerV2Board::canControlLoRaFemLna() const {
+    return loRaFEMControl.isLnaCanControl();
+  }
+
+  bool HeltecTrackerV2Board::isLoRaFemLnaEnabled() const {
+    return loRaFEMControl.isLNAEnabled();
+  }
@@ -21,5 +21,8 @@ public:
  void powerOff() override;
  uint16_t getBattMilliVolts() override;
  const char* getManufacturerName() const override ;
+  bool setLoRaFemLnaEnabled(bool enable) override;
+  bool canControlLoRaFemLna() const override;
+  bool isLoRaFemLnaEnabled() const override;

 };
@@ -12,8 +12,9 @@ class LoRaFEMControl
    void setRxModeEnable(void);
    void setRxModeEnableWhenMCUSleep(void);
    void setLNAEnable(bool enabled);
-    bool isLnaCanControl(void) { return lna_can_control; }
+    bool isLnaCanControl(void) const { return lna_can_control; }
    void setLnaCanControl(bool can_control) { lna_can_control = can_control; }
+    bool isLNAEnabled(void) const { return lna_enabled; }

  private:
    bool lna_enabled = false;
@@ -83,3 +83,21 @@ void HeltecV4Board::begin() {
    return loRaFEMControl.getFEMType() == KCT8103L_PA ? "Heltec V4.3 OLED" : "Heltec V4 OLED";
 #endif
  }
+
+  bool HeltecV4Board::setLoRaFemLnaEnabled(bool enable) {
+    if (!loRaFEMControl.isLnaCanControl()) {
+      return false;
+    }
+
+    loRaFEMControl.setLNAEnable(enable);
+    loRaFEMControl.setRxModeEnable();
+    return true;
+  }
+
+  bool HeltecV4Board::canControlLoRaFemLna() const {
+    return loRaFEMControl.isLnaCanControl();
+  }
+
+  bool HeltecV4Board::isLoRaFemLnaEnabled() const {
+    return loRaFEMControl.isLNAEnabled();
+  }
@@ -25,6 +25,9 @@ public:
  void onAfterTransmit(void) override;
  void enterDeepSleep(uint32_t secs, int pin_wake_btn = -1);
  void powerOff() override;
+  bool setLoRaFemLnaEnabled(bool enable) override;
+  bool canControlLoRaFemLna() const override;
+  bool isLoRaFemLnaEnabled() const override;
  uint16_t getBattMilliVolts() override;
  bool setAdcMultiplier(float multiplier) override {
    if (multiplier == 0.0f) {
@@ -18,8 +18,9 @@ class LoRaFEMControl
    void setRxModeEnable(void);
    void setRxModeEnableWhenMCUSleep(void);
    void setLNAEnable(bool enabled);
-    bool isLnaCanControl(void) { return lna_can_control; }
+    bool isLnaCanControl(void) const { return lna_can_control; }
    void setLnaCanControl(bool can_control) { lna_can_control = can_control; }
+    bool isLNAEnabled(void) const { return lna_enabled; }
    LoRaFEMType getFEMType(void) const { return fem_type; }
  private:
    LoRaFEMType fem_type=OTHER_FEM_TYPES;
@@ -1,7 +1,6 @@
 [Mesh_pocket]
 extends = nrf52_base
 board = heltec_mesh_pocket
-platform_packages = framework-arduinoadafruitnrf52
 board_build.ldscript = boards/nrf52840_s140_v6.ld
 build_flags =  ${nrf52_base.build_flags}
  -I src/helpers/nrf52
@@ -32,7 +31,6 @@ lib_deps =
  stevemarple/MicroNMEA @ ^2.0.6
  zinggjm/GxEPD2 @ 1.6.2
  bakercp/CRC32 @ ^2.0.0
-
 debug_tool = jlink
 upload_protocol = nrfutil

@@ -40,7 +38,6 @@ upload_protocol = nrfutil
 extends = Mesh_pocket
 build_src_filter = ${Mesh_pocket.build_src_filter}
  +<../examples/simple_repeater>
-
 build_flags =
  ${Mesh_pocket.build_flags}
  -D ADVERT_NAME='"Heltec_Mesh_Pocket Repeater"'
@@ -34,7 +34,7 @@ lib_deps =
  adafruit/Adafruit SSD1306 @ ^2.5.13
  adafruit/Adafruit NeoPixel @ ^1.12.3

-[env:nibble_screen_connect_repeater]
+[env:nibble_screen_connect_repeater_]
 extends = nibble_screen_connect_base
 build_flags =
  ${nibble_screen_connect_base.build_flags}
@@ -51,7 +51,7 @@ lib_deps =
  ${nibble_screen_connect_base.lib_deps}
  ${esp32_ota.lib_deps}

-[env:nibble_screen_connect_repeater_bridge_espnow]
+[env:nibble_screen_connect_repeater_bridge_espnow_]
 extends = nibble_screen_connect_base
 build_flags =
  ${nibble_screen_connect_base.build_flags}
@@ -70,7 +70,7 @@ lib_deps =
  ${nibble_screen_connect_base.lib_deps}
  ${esp32_ota.lib_deps}

-[env:nibble_screen_connect_terminal_chat]
+[env:nibble_screen_connect_terminal_chat_]
 extends = nibble_screen_connect_base
 build_flags =
  ${nibble_screen_connect_base.build_flags}
@@ -82,7 +82,7 @@ lib_deps =
  ${nibble_screen_connect_base.lib_deps}
  densaugeo/base64 @ ~1.4.0

-[env:nibble_screen_connect_room_server]
+[env:nibble_screen_connect_room_server_]
 extends = nibble_screen_connect_base
 build_flags =
  ${nibble_screen_connect_base.build_flags}
@@ -99,7 +99,7 @@ lib_deps =
  ${nibble_screen_connect_base.lib_deps}
  ${esp32_ota.lib_deps}

-[env:nibble_screen_connect_companion_radio_usb]
+[env:nibble_screen_connect_companion_radio_usb_]
 extends = nibble_screen_connect_base
 build_flags =
  ${nibble_screen_connect_base.build_flags}
@@ -116,7 +116,7 @@ lib_deps =
  ${nibble_screen_connect_base.lib_deps}
  densaugeo/base64 @ ~1.4.0

-[env:nibble_screen_connect_companion_radio_ble]
+[env:nibble_screen_connect_companion_radio_ble_]
 extends = nibble_screen_connect_base
 build_flags =
  ${nibble_screen_connect_base.build_flags}
@@ -137,7 +137,7 @@ lib_deps =
  ${nibble_screen_connect_base.lib_deps}
  densaugeo/base64 @ ~1.4.0

-[env:nibble_screen_connect_companion_radio_wifi]
+[env:nibble_screen_connect_companion_radio_wifi_]
 extends = nibble_screen_connect_base
 build_flags =
  ${nibble_screen_connect_base.build_flags}
@@ -160,7 +160,7 @@ lib_deps =
  densaugeo/base64 @ ~1.4.0


-[env:nibble_screen_connect_kiss_modem]
+[env:nibble_screen_connect_kiss_modem_]
 extends = nibble_screen_connect_base
 build_src_filter = ${nibble_screen_connect_base.build_src_filter}
  +<../examples/kiss_modem/>
@@ -0,0 +1,158 @@
+[nibble_zero_connect_base]
+extends = esp32_base
+board = esp32-s3-zero
+build_flags =
+  ${esp32_base.build_flags}
+  -I variants/nibble_zero_connect
+  -D NIBBLE_ZERO_CONNECT
+  -D P_LORA_DIO_1=4
+  -D P_LORA_NSS=10
+  -D P_LORA_RESET=6
+  -D P_LORA_BUSY=5
+  -D P_LORA_SCLK=12
+  -D P_LORA_MISO=13
+  -D P_LORA_MOSI=11
+  -D PIN_USER_BTN=1
+  -D PIN_BOARD_SDA=8
+  -D PIN_BOARD_SCL=7
+  -D PIN_STATUS_LED=39
+  -D P_LORA_TX_LED=39
+  -D DISPLAY_ROTATION=0
+  -D SX126X_DIO2_AS_RF_SWITCH=true
+  -D SX126X_DIO3_TCXO_VOLTAGE=1.8
+  -D SX126X_CURRENT_LIMIT=140
+  -D RADIO_CLASS=CustomSX1262
+  -D WRAPPER_CLASS=CustomSX1262Wrapper
+  -D LORA_TX_POWER=22
+  -D SX126X_RX_BOOSTED_GAIN=1
+build_src_filter = ${esp32_base.build_src_filter}
+  +<../variants/nibble_zero_connect>
+lib_deps =
+  ${esp32_base.lib_deps}
+  adafruit/Adafruit SSD1306 @ ^2.5.13
+
+[env:nibble_zero_connect_repeater_]
+extends = nibble_zero_connect_base
+build_flags =
+  ${nibble_zero_connect_base.build_flags}
+  -D DISPLAY_CLASS=SSD1306Display
+  -D ADVERT_NAME='"Nibble Repeater"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D MAX_NEIGHBOURS=50
+build_src_filter = ${nibble_zero_connect_base.build_src_filter}
+  +<helpers/ui/SSD1306Display.cpp>
+  +<../examples/simple_repeater>
+lib_deps =
+  ${nibble_zero_connect_base.lib_deps}
+  ${esp32_ota.lib_deps}
+
+[env:nibble_zero_connect_repeater_bridge_espnow_]
+extends = nibble_zero_connect_base
+build_flags =
+  ${nibble_zero_connect_base.build_flags}
+  -D DISPLAY_CLASS=SSD1306Display
+  -D ADVERT_NAME='"ESPNow Bridge"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D MAX_NEIGHBOURS=50
+  -D WITH_ESPNOW_BRIDGE=1
+build_src_filter = ${nibble_zero_connect_base.build_src_filter}
+  +<helpers/bridges/ESPNowBridge.cpp>
+  +<helpers/ui/SSD1306Display.cpp>
+  +<../examples/simple_repeater>
+lib_deps =
+  ${nibble_zero_connect_base.lib_deps}
+  ${esp32_ota.lib_deps}
+
+[env:nibble_zero_connect_terminal_chat_]
+extends = nibble_zero_connect_base
+build_flags =
+  ${nibble_zero_connect_base.build_flags}
+  -D MAX_CONTACTS=300
+  -D MAX_GROUP_CHANNELS=1
+build_src_filter = ${nibble_zero_connect_base.build_src_filter}
+  +<../examples/simple_secure_chat/main.cpp>
+lib_deps =
+  ${nibble_zero_connect_base.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+
+[env:nibble_zero_connect_room_server_]
+extends = nibble_zero_connect_base
+build_flags =
+  ${nibble_zero_connect_base.build_flags}
+  -D DISPLAY_CLASS=SSD1306Display
+  -D ADVERT_NAME='"Nibble Room"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D ROOM_PASSWORD='"hello"'
+build_src_filter = ${nibble_zero_connect_base.build_src_filter}
+  +<helpers/ui/SSD1306Display.cpp>
+  +<../examples/simple_room_server>
+lib_deps =
+  ${nibble_zero_connect_base.lib_deps}
+  ${esp32_ota.lib_deps}
+
+[env:nibble_zero_connect_companion_radio_usb_]
+extends = nibble_zero_connect_base
+build_flags =
+  ${nibble_zero_connect_base.build_flags}
+  -I examples/companion_radio/ui-new
+  -D DISPLAY_CLASS=SSD1306Display
+  -D MAX_CONTACTS=300
+  -D MAX_GROUP_CHANNELS=8
+build_src_filter = ${nibble_zero_connect_base.build_src_filter}
+  +<helpers/ui/SSD1306Display.cpp>
+  +<helpers/ui/MomentaryButton.cpp>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
+lib_deps =
+  ${nibble_zero_connect_base.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+
+[env:nibble_zero_connect_companion_radio_ble_]
+extends = nibble_zero_connect_base
+build_flags =
+  ${nibble_zero_connect_base.build_flags}
+  -I examples/companion_radio/ui-new
+  -D DISPLAY_CLASS=SSD1306Display
+  -D MAX_CONTACTS=300
+  -D MAX_GROUP_CHANNELS=8
+  -D BLE_PIN_CODE=123456
+  -D BLE_DEBUG_LOGGING=1
+  -D OFFLINE_QUEUE_SIZE=256
+build_src_filter = ${nibble_zero_connect_base.build_src_filter}
+  +<helpers/esp32/*.cpp>
+  +<helpers/ui/SSD1306Display.cpp>
+  +<helpers/ui/MomentaryButton.cpp>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
+lib_deps =
+  ${nibble_zero_connect_base.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+
+[env:nibble_zero_connect_companion_radio_wifi_]
+extends = nibble_zero_connect_base
+build_flags =
+  ${nibble_zero_connect_base.build_flags}
+  -I examples/companion_radio/ui-new
+  -D DISPLAY_CLASS=SSD1306Display
+  -D MAX_CONTACTS=300
+  -D MAX_GROUP_CHANNELS=8
+  -D WIFI_DEBUG_LOGGING=1
+  -D WIFI_SSID='"myssid"'
+  -D WIFI_PWD='"mypwd"'
+build_src_filter = ${nibble_zero_connect_base.build_src_filter}
+  +<helpers/ui/SSD1306Display.cpp>
+  +<helpers/ui/MomentaryButton.cpp>
+  +<helpers/esp32/*.cpp>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
+lib_deps =
+  ${nibble_zero_connect_base.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+
+
@@ -0,0 +1,35 @@
+#include <Arduino.h>
+#include "target.h"
+
+ESP32Board board;
+
+static SPIClass spi;
+RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, spi);
+WRAPPER_CLASS radio_driver(radio, board);
+
+ESP32RTCClock fallback_clock;
+AutoDiscoverRTCClock rtc_clock(fallback_clock);
+SensorManager sensors;
+
+#ifdef DISPLAY_CLASS
+  DISPLAY_CLASS display;
+  MomentaryButton user_btn(PIN_USER_BTN, 1000, true);
+#endif
+
+#ifndef LORA_CR
+  #define LORA_CR      5
+#endif
+
+bool radio_init() {
+  fallback_clock.begin();
+  rtc_clock.begin(Wire);
+  
+  return radio.std_init(&spi);
+}
+
+mesh::LocalIdentity radio_new_identity() {
+  RadioNoiseListener rng(radio);
+  return mesh::LocalIdentity(&rng);
+}
+
+
@@ -0,0 +1,28 @@
+#pragma once
+
+#define RADIOLIB_STATIC_ONLY 1
+#include <RadioLib.h>
+#include <helpers/radiolib/RadioLibWrappers.h>
+#include <helpers/ESP32Board.h>
+#include <helpers/radiolib/CustomSX1262Wrapper.h>
+#include <helpers/AutoDiscoverRTCClock.h>
+#include <helpers/SensorManager.h>
+#ifdef DISPLAY_CLASS
+  #include <helpers/ui/SSD1306Display.h>
+  #include <helpers/ui/MomentaryButton.h>
+#endif
+
+extern ESP32Board board;
+extern WRAPPER_CLASS radio_driver;
+extern AutoDiscoverRTCClock rtc_clock;
+extern SensorManager sensors;
+
+#ifdef DISPLAY_CLASS
+  extern DISPLAY_CLASS display;
+  extern MomentaryButton user_btn;
+#endif
+
+bool radio_init();
+mesh::LocalIdentity radio_new_identity();
+
+
@@ -1,6 +1,7 @@
 [Xiao_C6]
 extends = esp32c6_base
 board = esp32-c6-devkitm-1
+board_build.flash_mode = dio
 board_build.partitions = min_spiffs.csv ; get around 4mb flash limit
 build_flags =
  ${esp32c6_base.build_flags}
Author	SHA1	Message	Date
Scott Powell	2c9ab2fe5e	* timing fixes (courtesy of Taco)	2026-07-07 13:54:14 +10:00
Scott Powell	cea246d0eb	* super fast ST7735 display driver	2026-07-06 15:09:18 +10:00
liamcottle	b40968a0f0	stop tracking vscode extensions.json	2026-07-05 12:23:22 +12:00
ripplebiz	61e21462aa	Merge pull request #2867 from entr0p1/feature/sx1262-ldo-support SX1262 LDO Support	2026-07-04 12:35:03 +10:00
Liam Cottle	acdf4e5bdc	Merge pull request #2372 from jirogit/fix/region-save-return-value fix(RegionMap): save() returns actual write success instead of hardcoded true	2026-07-03 12:40:22 +12:00
ripplebiz	33fdf67e4d	Merge pull request #2874 from neilalexander/neil/replyregion Fix `recv_pkt_region` incorrect usage	2026-07-02 22:20:30 +10:00
Neil Alexander	0d7379520f	Fix `recv_pkt_region` incorrect usage The `recv_pkt_region` is set when processing a flood packet in `filterRecvFloodPacket` but direct/non-flood packets would never pass through that function, so the pointer was not cleared for them. `sendFloodReply` would then later use it blindly, which meant that the response would either inherit the region from the last flood packet, or refer to a non-initialised pointer if no region floods had been received yet.	2026-07-02 09:28:41 +01:00
ripplebiz	affe61dc3b	Merge pull request #2880 from ckoehler/push-sonzsorqmwqz refactor: split MeshTables::hasSeen into pure query + markSeen	2026-07-02 13:58:48 +10:00
Christoph Koehler	4f701b7aec	refactor: split MeshTables::hasSeen into pure query + markSeen hasSeen() was simultaneously a predicate and a mutator — it inserted the packet hash on every miss, making five call sites that only wanted to mark a packet as sent call it with the return value discarded. Split into: - wasSeen() — pure predicate, no side effects - markSeen() — explicit insert All query sites now call markSeen() immediately after wasSeen() returns false, preserving identical runtime behaviour. The five mark-only send sites (sendFlood, sendDirect, sendZeroHop x2) now call markSeen directly. Also fixes three bridge sites (BridgeBase, ESPNowBridge, RS232Bridge) that had the same query+implicit-insert pattern. Tests: add test/test_mesh_tables/ covering wasSeen purity, markSeen, dup stats, and clear. Update SHA256 mock to produce deterministic output (previously finalize() was a no-op). Add Packet.cpp to native build filter.	2026-07-01 21:51:38 -06:00
Liam Cottle	dd87371574	Merge pull request #2873 from ckoehler/fix/nix-devshell build: add gcc, gtest to nix shell, fix native test framework	2026-07-02 11:32:21 +12:00
Christoph Koehler	4f7c1cb88f	build: add gcc, gtest to nix shell, fix native test framework	2026-07-01 08:19:27 -06:00
entr0p1	2cb3a29fa8	SX1262 LDO Support - Added build flag "SX126X_USE_REGULATOR_LDO" (set to 1 to enable) to use LDO for the SX1262 radio instead of DC-DC when the DCDC pin isn't wired up (e.g. t-echo lite) - Added additional debug mode diagnostic messages during SX1262 init to better highlight faults	2026-06-30 16:55:16 +10:00
Liam Cottle	1869b57d62	Merge pull request #2853 from HDDen/dev Add Data-Type to number_allocations.md	2026-06-29 21:49:19 +12:00
HDDen	58b0f7df9c	Update number_allocations.md	2026-06-29 12:41:44 +03:00
HDDen	bc35208682	Update number_allocations.md Added Data-Type range for MeshCore Images codec (range is for small reserve to future versions)	2026-06-28 00:32:22 +03:00
Scott Powell	4f8cb8db78	* ACK packets being 'clipped' (in Dispatcher send). Needed to extend max_airtime timeout calc for short packets	2026-06-27 21:06:01 +10:00
Liam Cottle	5ff39c6243	Merge pull request #2570 from IoTThinks/MCdev-Fixed-flashmode-XiaoC6-202605 Added flash_mode=dio to avoid boot loop when flashing using merge.bin	2026-06-27 11:32:10 +12:00
Liam Cottle	dc200cf22d	Merge pull request #2639 from sefinek/fix/typos-in-comments fix: fix typos in source code comments	2026-06-27 11:26:54 +12:00
Liam Cottle	62b95b4e48	Merge pull request #2844 from oltaco/fix-rx-boosted-gain Fix for Rx boosted gain on LR1110	2026-06-27 11:22:47 +12:00
taco	f3d4d8cd5e	always save boosted gain setting	2026-06-26 22:36:49 +10:00
Liam Cottle	3d4eec4a6a	Merge pull request #1194 from ViezeVingertjes/nibble_zero_connect Added support for the nibble zero connect	2026-06-26 13:59:59 +12:00
taco	b07aba7937	fix: report error when rxgain setting is unsupported or rejected	2026-06-26 08:45:03 +10:00
taco	1f9bb67400	return bool when setting rx boost	2026-06-26 07:44:01 +10:00
ViezeVingertjes	b8f1fad654	Add trailing underscore to nibble_screen_connect env names to exclude from automatic builds	2026-06-25 23:27:07 +02:00
ViezeVingertjes	eb938a9b78	Address review comments and sync with dev	2026-06-25 23:26:55 +02:00
ViezeVingertjes	69df5c7a95	Remove NeoPixel configuration as its unused.	2026-06-25 23:26:55 +02:00
ViezeVingertjes	9c7d71b9be	Added support for the nibble zero connect	2026-06-25 23:26:55 +02:00
taco	5d0ff7fe6e	remove guard on MyMesh::setRxBoostedGain()	2026-06-26 07:06:37 +10:00
ripplebiz	3192684582	Merge pull request #2752 from Quency-D/heltec-tower-v2 Add Heltec tower v2	2026-06-23 11:51:03 +10:00
ripplebiz	aa1cb1f663	Merge pull request #2765 from fizzyfuzzle/ESP32-Reset-Reason Add ESP32 Reset Reason to existing pwrmgt.bootreason cli command	2026-06-23 11:41:57 +10:00
ripplebiz	6a63dfce1c	Merge pull request #2771 from oltaco/nrf52-framework-buildfix Point Heltec Mesh Solar and Mesh Pocket at our NRF52 framework fork	2026-06-23 11:37:03 +10:00
Liam Cottle	c2cfba4af3	Merge pull request #2810 from IoTThinks/MCDev-Fixed-GPS-Time-for-T114-202606 Fixed GPS time sync for Heltec T114	2026-06-22 14:19:09 +12:00
Kevin Le	62849ef114	Fixed GPS time sync for Heltec T114	2026-06-22 09:13:36 +07:00
ripplebiz	60ea4a91bf	Merge pull request #1727 from weebl2000/use-hardware-channel-activity-detection Use hardware channel activity detection for checking interference	2026-06-15 19:51:59 +10:00
taco	dd9b3b32c3	build fix for Heltec Mesh Solar and Mesh Pocket	2026-06-15 00:57:12 +10:00
Wessel Nieboer	7c8e092457	Have CAD be a separate toggle (set cad on/off)	2026-06-14 15:20:58 +02:00
Wessel Nieboer	099ef67348	Prevent packet errors from growing	2026-06-14 15:19:20 +02:00
Wessel Nieboer	04a6c7009a	Just check for not channel free	2026-06-14 15:19:19 +02:00
Wessel Nieboer	813d108c7a	Also return busy if preamble detected	2026-06-14 15:19:19 +02:00
Wessel Nieboer	4f9a091671	Use hardware channel activity detection for checking interference	2026-06-14 15:19:18 +02:00
Marco	e7db7c5a94	Add ESP32 Reset Reason	2026-06-14 11:41:01 +02:00
Huw Duddy	29f0a7fc4f	Merge pull request #2763 from meshcore-dev/anon-contacts-fix * fix for anon contacts when full	2026-06-14 19:11:38 +10:00
Scott Powell	2e73fe948e	* fix for anon lastmod	2026-06-14 18:54:51 +10:00
Scott Powell	538ac38e18	* fix for counter in RESP_CODE_CONTACTS_START	2026-06-14 18:39:34 +10:00
Scott Powell	c2d223ff55	* now handle the case where onAdvertRecv() should _replace_ the anon contact slot	2026-06-14 18:12:08 +10:00
Scott Powell	07648e3344	* fix for anon contacts when full	2026-06-14 17:50:41 +10:00
ripplebiz	a5cb0c25ca	Merge pull request #2140 from Quency-D/cli-lna-command Add CLI control to LoRa's fem LNA.	2026-06-13 22:00:08 +10:00
Quency-D	5300fa18c7	Restore companion NodePrefs file ending	2026-06-13 17:40:11 +08:00
Quency-D	3ee58fd2e3	Remove companion FEM RX gain command IDs	2026-06-13 17:31:54 +08:00
Scott Powell	d5f74e93c5	* PAYLOAD_TYPE_PATH bad path_len now rejected	2026-06-13 18:19:41 +10:00
Quency-D	1c4c995a41	Fix low power consumption issues	2026-06-13 16:00:06 +08:00
Quency-D	d2d3d44c9b	Add maximum power limit	2026-06-12 18:05:27 +08:00
Quency-D	fe56d01da2	add tower v2 PA control	2026-06-12 17:58:19 +08:00
Quency-D	190dbb5293	Merge pull request #13 from meshcore-dev/dev merge Dev	2026-06-11 15:30:31 +08:00
Quency-D	9100a58671	Merge branch 'dev' into cli-lna-command	2026-06-10 11:30:04 +08:00
ripplebiz	5f3b7f25d0	Merge pull request #2722 from liamcottle/fix/free-packet-on-parse-failure Fix: CMD_SEND_RAW_PACKET not freeing packet on parse failure	2026-06-08 22:47:06 +10:00
liamcottle	ae0bb7ee95	use releasePacket instead of _mgr->free	2026-06-09 00:42:58 +12:00
liamcottle	07bfe90695	free packet on parse failure	2026-06-09 00:31:48 +12:00
Sefinek	4bf391f5c3	fix: fix typos in source code comments	2026-05-28 16:38:39 +02:00
Sefinek	00d445a269	fix: fix typos in source code comments	2026-05-28 15:44:56 +02:00
Quency-D	250f448c3f	Merge branch 'dev' into cli-lna-command	2026-05-20 10:13:28 +08:00
Kevin Le	f29cae602f	Added flash_mode=dio to avoid boot loop when flashing using merge.bin	2026-05-16 09:30:49 +07:00
Quency-D	3a546a6395	add heltec tower v2	2026-05-12 14:53:17 +08:00
Quency-D	12e6899580	Merge branch 'dev' into cli-lna-command	2026-05-09 18:19:31 +08:00
jirogit	8e787f6ee4	fix(RegionMap): save() returns actual write success instead of hardcoded true	2026-05-01 00:06:46 -07:00
Quency-D	444dcfb8fd	Change write to read for radio_fem_rxgain	2026-04-27 14:06:21 +08:00
Quency-D	62b0d82682	Restore WiFi operation command scope comments	2026-04-25 16:12:40 +08:00
Quency-D	9d26953398	Remove unnecessary blank line in MyMesh.cpp	2026-04-25 16:10:57 +08:00
Quency-D	c42f6db0eb	Revise according to the review comments. Co-authored-by: Copilot <copilot@github.com>	2026-04-25 16:01:26 +08:00
Quency-D	22f07b3e48	Revert "Merge branch 'meshcore-dev:main' into cli-lna-command" This reverts commit `ca047fe0c0`, reversing changes made to `ddedb3c7a7`.	2026-04-25 15:33:59 +08:00
Quency-D	ca047fe0c0	Merge branch 'meshcore-dev:main' into cli-lna-command	2026-04-25 15:29:00 +08:00
Quency-D	ddedb3c7a7	Merge branch 'dev' into cli-lna-command	2026-04-25 15:28:07 +08:00
Quency-D	9664305a87	Adapt LNA CLI control commands for heltec_t096.	2026-03-24 16:13:13 +08:00
Quency-D	2442e9a5bd	Adapt LNA CLI control commands for heltec_tracker_v2.	2026-03-24 16:05:28 +08:00
Quency-D	65752fef72	Fix the memory leak issue in the strdup function.	2026-03-24 13:57:11 +08:00
Quency-D	8435464c84	Add v4 FEM LNA CLI control commands.	2026-03-24 10:48:15 +08:00