Files
MeshCore/variants
agessaman 61ae0920df feat(rak3401): cold-sleep RAK4631 onboard SX1262 on RAK13302 builds
A RAK4631 core paired with a RAK13302 leaves the core's own SX1262
powered but never initialized, idling in STDBY_RC for the life of the
board. Firmware cannot cut its supply -- P1.05 is the RF switch rail,
not the radio's -- so bring it up on its own pins just long enough to
issue a cold sleep, before std_init() repins SPI onto the RAK13302.

Gated behind RAK4631_ONBOARD_SX1262_SLEEP and exposed through seven
RAK_4631_13302_* envs, so RAK_3401_* artifacts are unchanged.

The sleep is issued regardless of what begin() returns: Module::init()
runs first, so SPI stays usable even if TCXO calibration fails. NSS is
then held high, since the SX1262 wakes on an NSS falling edge.

Verified on RAK19007 + RAK4631 + RAK13302: begin=0 sleep=0, RAK13302
init clean (device_errors=0x0000), TX and RX both confirmed. The
current saving itself is derived from the datasheet (600 uA STDBY_RC
-> 160 nA cold sleep) and is not measured.
2026-08-17 21:04:06 -07:00
..
2026-08-13 00:12:37 +10:00
2026-07-06 12:04:42 -04:00