mirror of
https://github.com/meshcore-dev/MeshCore.git
synced 2026-03-29 13:00:25 +00:00
2057 lines
75 KiB
C++
2057 lines
75 KiB
C++
#include "MyMesh.h"
|
|
|
|
#include <Arduino.h> // needed for PlatformIO
|
|
#include <Mesh.h>
|
|
|
|
#define CMD_APP_START 1
|
|
#define CMD_SEND_TXT_MSG 2
|
|
#define CMD_SEND_CHANNEL_TXT_MSG 3
|
|
#define CMD_GET_CONTACTS 4 // with optional 'since' (for efficient sync)
|
|
#define CMD_GET_DEVICE_TIME 5
|
|
#define CMD_SET_DEVICE_TIME 6
|
|
#define CMD_SEND_SELF_ADVERT 7
|
|
#define CMD_SET_ADVERT_NAME 8
|
|
#define CMD_ADD_UPDATE_CONTACT 9
|
|
#define CMD_SYNC_NEXT_MESSAGE 10
|
|
#define CMD_SET_RADIO_PARAMS 11
|
|
#define CMD_SET_RADIO_TX_POWER 12
|
|
#define CMD_RESET_PATH 13
|
|
#define CMD_SET_ADVERT_LATLON 14
|
|
#define CMD_REMOVE_CONTACT 15
|
|
#define CMD_SHARE_CONTACT 16
|
|
#define CMD_EXPORT_CONTACT 17
|
|
#define CMD_IMPORT_CONTACT 18
|
|
#define CMD_REBOOT 19
|
|
#define CMD_GET_BATT_AND_STORAGE 20 // was CMD_GET_BATTERY_VOLTAGE
|
|
#define CMD_SET_TUNING_PARAMS 21
|
|
#define CMD_DEVICE_QEURY 22
|
|
#define CMD_EXPORT_PRIVATE_KEY 23
|
|
#define CMD_IMPORT_PRIVATE_KEY 24
|
|
#define CMD_SEND_RAW_DATA 25
|
|
#define CMD_SEND_LOGIN 26
|
|
#define CMD_SEND_STATUS_REQ 27
|
|
#define CMD_HAS_CONNECTION 28
|
|
#define CMD_LOGOUT 29 // 'Disconnect'
|
|
#define CMD_GET_CONTACT_BY_KEY 30
|
|
#define CMD_GET_CHANNEL 31
|
|
#define CMD_SET_CHANNEL 32
|
|
#define CMD_SIGN_START 33
|
|
#define CMD_SIGN_DATA 34
|
|
#define CMD_SIGN_FINISH 35
|
|
#define CMD_SEND_TRACE_PATH 36
|
|
#define CMD_SET_DEVICE_PIN 37
|
|
#define CMD_SET_OTHER_PARAMS 38
|
|
#define CMD_SEND_TELEMETRY_REQ 39 // can deprecate this
|
|
#define CMD_GET_CUSTOM_VARS 40
|
|
#define CMD_SET_CUSTOM_VAR 41
|
|
#define CMD_GET_ADVERT_PATH 42
|
|
#define CMD_GET_TUNING_PARAMS 43
|
|
// NOTE: CMD range 44..49 parked, potentially for WiFi operations
|
|
#define CMD_SEND_BINARY_REQ 50
|
|
#define CMD_FACTORY_RESET 51
|
|
#define CMD_SEND_PATH_DISCOVERY_REQ 52
|
|
#define CMD_SET_FLOOD_SCOPE 54 // v8+
|
|
#define CMD_SEND_CONTROL_DATA 55 // v8+
|
|
#define CMD_GET_STATS 56 // v8+, second byte is stats type
|
|
#define CMD_SEND_ANON_REQ 57
|
|
#define CMD_SET_AUTOADD_CONFIG 58
|
|
#define CMD_GET_AUTOADD_CONFIG 59
|
|
#define CMD_GET_ALLOWED_REPEAT_FREQ 60
|
|
#define CMD_SET_PATH_HASH_MODE 61
|
|
|
|
// Stats sub-types for CMD_GET_STATS
|
|
#define STATS_TYPE_CORE 0
|
|
#define STATS_TYPE_RADIO 1
|
|
#define STATS_TYPE_PACKETS 2
|
|
|
|
#define RESP_CODE_OK 0
|
|
#define RESP_CODE_ERR 1
|
|
#define RESP_CODE_CONTACTS_START 2 // first reply to CMD_GET_CONTACTS
|
|
#define RESP_CODE_CONTACT 3 // multiple of these (after CMD_GET_CONTACTS)
|
|
#define RESP_CODE_END_OF_CONTACTS 4 // last reply to CMD_GET_CONTACTS
|
|
#define RESP_CODE_SELF_INFO 5 // reply to CMD_APP_START
|
|
#define RESP_CODE_SENT 6 // reply to CMD_SEND_TXT_MSG
|
|
#define RESP_CODE_CONTACT_MSG_RECV 7 // a reply to CMD_SYNC_NEXT_MESSAGE (ver < 3)
|
|
#define RESP_CODE_CHANNEL_MSG_RECV 8 // a reply to CMD_SYNC_NEXT_MESSAGE (ver < 3)
|
|
#define RESP_CODE_CURR_TIME 9 // a reply to CMD_GET_DEVICE_TIME
|
|
#define RESP_CODE_NO_MORE_MESSAGES 10 // a reply to CMD_SYNC_NEXT_MESSAGE
|
|
#define RESP_CODE_EXPORT_CONTACT 11
|
|
#define RESP_CODE_BATT_AND_STORAGE 12 // a reply to a CMD_GET_BATT_AND_STORAGE
|
|
#define RESP_CODE_DEVICE_INFO 13 // a reply to CMD_DEVICE_QEURY
|
|
#define RESP_CODE_PRIVATE_KEY 14 // a reply to CMD_EXPORT_PRIVATE_KEY
|
|
#define RESP_CODE_DISABLED 15
|
|
#define RESP_CODE_CONTACT_MSG_RECV_V3 16 // a reply to CMD_SYNC_NEXT_MESSAGE (ver >= 3)
|
|
#define RESP_CODE_CHANNEL_MSG_RECV_V3 17 // a reply to CMD_SYNC_NEXT_MESSAGE (ver >= 3)
|
|
#define RESP_CODE_CHANNEL_INFO 18 // a reply to CMD_GET_CHANNEL
|
|
#define RESP_CODE_SIGN_START 19
|
|
#define RESP_CODE_SIGNATURE 20
|
|
#define RESP_CODE_CUSTOM_VARS 21
|
|
#define RESP_CODE_ADVERT_PATH 22
|
|
#define RESP_CODE_TUNING_PARAMS 23
|
|
#define RESP_CODE_STATS 24 // v8+, second byte is stats type
|
|
#define RESP_CODE_AUTOADD_CONFIG 25
|
|
#define RESP_ALLOWED_REPEAT_FREQ 26
|
|
|
|
#define SEND_TIMEOUT_BASE_MILLIS 500
|
|
#define FLOOD_SEND_TIMEOUT_FACTOR 16.0f
|
|
#define DIRECT_SEND_PERHOP_FACTOR 6.0f
|
|
#define DIRECT_SEND_PERHOP_EXTRA_MILLIS 250
|
|
#define LAZY_CONTACTS_WRITE_DELAY 5000
|
|
|
|
#define PUBLIC_GROUP_PSK "izOH6cXN6mrJ5e26oRXNcg=="
|
|
|
|
// these are _pushed_ to client app at any time
|
|
#define PUSH_CODE_ADVERT 0x80
|
|
#define PUSH_CODE_PATH_UPDATED 0x81
|
|
#define PUSH_CODE_SEND_CONFIRMED 0x82
|
|
#define PUSH_CODE_MSG_WAITING 0x83
|
|
#define PUSH_CODE_RAW_DATA 0x84
|
|
#define PUSH_CODE_LOGIN_SUCCESS 0x85
|
|
#define PUSH_CODE_LOGIN_FAIL 0x86
|
|
#define PUSH_CODE_STATUS_RESPONSE 0x87
|
|
#define PUSH_CODE_LOG_RX_DATA 0x88
|
|
#define PUSH_CODE_TRACE_DATA 0x89
|
|
#define PUSH_CODE_NEW_ADVERT 0x8A
|
|
#define PUSH_CODE_TELEMETRY_RESPONSE 0x8B
|
|
#define PUSH_CODE_BINARY_RESPONSE 0x8C
|
|
#define PUSH_CODE_PATH_DISCOVERY_RESPONSE 0x8D
|
|
#define PUSH_CODE_CONTROL_DATA 0x8E // v8+
|
|
#define PUSH_CODE_CONTACT_DELETED 0x8F // used to notify client app of deleted contact when overwriting oldest
|
|
#define PUSH_CODE_CONTACTS_FULL 0x90 // used to notify client app that contacts storage is full
|
|
|
|
#define ERR_CODE_UNSUPPORTED_CMD 1
|
|
#define ERR_CODE_NOT_FOUND 2
|
|
#define ERR_CODE_TABLE_FULL 3
|
|
#define ERR_CODE_BAD_STATE 4
|
|
#define ERR_CODE_FILE_IO_ERROR 5
|
|
#define ERR_CODE_ILLEGAL_ARG 6
|
|
|
|
#define MAX_SIGN_DATA_LEN (8 * 1024) // 8K
|
|
|
|
// Auto-add config bitmask
|
|
// Bit 0: If set, overwrite oldest non-favourite contact when contacts file is full
|
|
// Bits 1-4: these indicate which contact types to auto-add when manual_contact_mode = 0x01
|
|
#define AUTO_ADD_OVERWRITE_OLDEST (1 << 0) // 0x01 - overwrite oldest non-favourite when full
|
|
#define AUTO_ADD_CHAT (1 << 1) // 0x02 - auto-add Chat (Companion) (ADV_TYPE_CHAT)
|
|
#define AUTO_ADD_REPEATER (1 << 2) // 0x04 - auto-add Repeater (ADV_TYPE_REPEATER)
|
|
#define AUTO_ADD_ROOM_SERVER (1 << 3) // 0x08 - auto-add Room Server (ADV_TYPE_ROOM)
|
|
#define AUTO_ADD_SENSOR (1 << 4) // 0x10 - auto-add Sensor (ADV_TYPE_SENSOR)
|
|
|
|
void MyMesh::writeOKFrame() {
|
|
uint8_t buf[1];
|
|
buf[0] = RESP_CODE_OK;
|
|
_serial->writeFrame(buf, 1);
|
|
}
|
|
void MyMesh::writeErrFrame(uint8_t err_code) {
|
|
uint8_t buf[2];
|
|
buf[0] = RESP_CODE_ERR;
|
|
buf[1] = err_code;
|
|
_serial->writeFrame(buf, 2);
|
|
}
|
|
|
|
void MyMesh::writeDisabledFrame() {
|
|
uint8_t buf[1];
|
|
buf[0] = RESP_CODE_DISABLED;
|
|
_serial->writeFrame(buf, 1);
|
|
}
|
|
|
|
void MyMesh::writeContactRespFrame(uint8_t code, const ContactInfo &contact) {
|
|
int i = 0;
|
|
out_frame[i++] = code;
|
|
memcpy(&out_frame[i], contact.id.pub_key, PUB_KEY_SIZE);
|
|
i += PUB_KEY_SIZE;
|
|
out_frame[i++] = contact.type;
|
|
out_frame[i++] = contact.flags;
|
|
out_frame[i++] = contact.out_path_len;
|
|
memcpy(&out_frame[i], contact.out_path, MAX_PATH_SIZE);
|
|
i += MAX_PATH_SIZE;
|
|
StrHelper::strzcpy((char *)&out_frame[i], contact.name, 32);
|
|
i += 32;
|
|
memcpy(&out_frame[i], &contact.last_advert_timestamp, 4);
|
|
i += 4;
|
|
memcpy(&out_frame[i], &contact.gps_lat, 4);
|
|
i += 4;
|
|
memcpy(&out_frame[i], &contact.gps_lon, 4);
|
|
i += 4;
|
|
memcpy(&out_frame[i], &contact.lastmod, 4);
|
|
i += 4;
|
|
_serial->writeFrame(out_frame, i);
|
|
}
|
|
|
|
void MyMesh::updateContactFromFrame(ContactInfo &contact, uint32_t& last_mod, const uint8_t *frame, int len) {
|
|
int i = 0;
|
|
uint8_t code = frame[i++]; // eg. CMD_ADD_UPDATE_CONTACT
|
|
memcpy(contact.id.pub_key, &frame[i], PUB_KEY_SIZE);
|
|
i += PUB_KEY_SIZE;
|
|
contact.type = frame[i++];
|
|
contact.flags = frame[i++];
|
|
contact.out_path_len = frame[i++];
|
|
memcpy(contact.out_path, &frame[i], MAX_PATH_SIZE);
|
|
i += MAX_PATH_SIZE;
|
|
memcpy(contact.name, &frame[i], 32);
|
|
i += 32;
|
|
memcpy(&contact.last_advert_timestamp, &frame[i], 4);
|
|
i += 4;
|
|
if (len >= i + 8) { // optional fields
|
|
memcpy(&contact.gps_lat, &frame[i], 4);
|
|
i += 4;
|
|
memcpy(&contact.gps_lon, &frame[i], 4);
|
|
i += 4;
|
|
if (len >= i + 4) {
|
|
memcpy(&last_mod, &frame[i], 4);
|
|
}
|
|
}
|
|
}
|
|
|
|
bool MyMesh::Frame::isChannelMsg() const {
|
|
return buf[0] == RESP_CODE_CHANNEL_MSG_RECV || buf[0] == RESP_CODE_CHANNEL_MSG_RECV_V3;
|
|
}
|
|
|
|
void MyMesh::addToOfflineQueue(const uint8_t frame[], int len) {
|
|
if (offline_queue_len >= OFFLINE_QUEUE_SIZE) {
|
|
MESH_DEBUG_PRINTLN("WARN: offline_queue is full!");
|
|
int pos = 0;
|
|
while (pos < offline_queue_len) {
|
|
if (offline_queue[pos].isChannelMsg()) {
|
|
for (int i = pos; i < offline_queue_len - 1; i++) { // delete oldest channel msg from queue
|
|
offline_queue[i] = offline_queue[i + 1];
|
|
}
|
|
MESH_DEBUG_PRINTLN("INFO: removed oldest channel message from queue.");
|
|
offline_queue[offline_queue_len - 1].len = len;
|
|
memcpy(offline_queue[offline_queue_len - 1].buf, frame, len);
|
|
return;
|
|
}
|
|
pos++;
|
|
}
|
|
MESH_DEBUG_PRINTLN("INFO: no channel messages to remove from queue.");
|
|
} else {
|
|
offline_queue[offline_queue_len].len = len;
|
|
memcpy(offline_queue[offline_queue_len].buf, frame, len);
|
|
offline_queue_len++;
|
|
}
|
|
}
|
|
|
|
int MyMesh::getFromOfflineQueue(uint8_t frame[]) {
|
|
if (offline_queue_len > 0) { // check offline queue
|
|
size_t len = offline_queue[0].len; // take from top of queue
|
|
memcpy(frame, offline_queue[0].buf, len);
|
|
|
|
offline_queue_len--;
|
|
for (int i = 0; i < offline_queue_len; i++) { // delete top item from queue
|
|
offline_queue[i] = offline_queue[i + 1];
|
|
}
|
|
return len;
|
|
}
|
|
return 0; // queue is empty
|
|
}
|
|
|
|
float MyMesh::getAirtimeBudgetFactor() const {
|
|
return _prefs.airtime_factor;
|
|
}
|
|
|
|
int MyMesh::getInterferenceThreshold() const {
|
|
return 0; // disabled for now, until currentRSSI() problem is resolved
|
|
}
|
|
|
|
int MyMesh::calcRxDelay(float score, uint32_t air_time) const {
|
|
if (_prefs.rx_delay_base <= 0.0f) return 0;
|
|
return (int)((pow(_prefs.rx_delay_base, 0.85f - score) - 1.0) * air_time);
|
|
}
|
|
|
|
uint32_t MyMesh::getRetransmitDelay(const mesh::Packet *packet) {
|
|
uint32_t t = (_radio->getEstAirtimeFor(packet->getPathByteLen() + packet->payload_len + 2) * 0.5f);
|
|
return getRNG()->nextInt(0, 5*t + 1);
|
|
}
|
|
uint32_t MyMesh::getDirectRetransmitDelay(const mesh::Packet *packet) {
|
|
uint32_t t = (_radio->getEstAirtimeFor(packet->getPathByteLen() + packet->payload_len + 2) * 0.2f);
|
|
return getRNG()->nextInt(0, 5*t + 1);
|
|
}
|
|
|
|
uint8_t MyMesh::getExtraAckTransmitCount() const {
|
|
return _prefs.multi_acks;
|
|
}
|
|
|
|
void MyMesh::logRxRaw(float snr, float rssi, const uint8_t raw[], int len) {
|
|
if (_serial->isConnected() && len + 3 <= MAX_FRAME_SIZE) {
|
|
int i = 0;
|
|
out_frame[i++] = PUSH_CODE_LOG_RX_DATA;
|
|
out_frame[i++] = (int8_t)(snr * 4);
|
|
out_frame[i++] = (int8_t)(rssi);
|
|
memcpy(&out_frame[i], raw, len);
|
|
i += len;
|
|
|
|
_serial->writeFrame(out_frame, i);
|
|
}
|
|
}
|
|
|
|
bool MyMesh::isAutoAddEnabled() const {
|
|
return (_prefs.manual_add_contacts & 1) == 0;
|
|
}
|
|
|
|
bool MyMesh::shouldAutoAddContactType(uint8_t contact_type) const {
|
|
if ((_prefs.manual_add_contacts & 1) == 0) {
|
|
return true;
|
|
}
|
|
|
|
uint8_t type_bit = 0;
|
|
switch (contact_type) {
|
|
case ADV_TYPE_CHAT:
|
|
type_bit = AUTO_ADD_CHAT;
|
|
break;
|
|
case ADV_TYPE_REPEATER:
|
|
type_bit = AUTO_ADD_REPEATER;
|
|
break;
|
|
case ADV_TYPE_ROOM:
|
|
type_bit = AUTO_ADD_ROOM_SERVER;
|
|
break;
|
|
case ADV_TYPE_SENSOR:
|
|
type_bit = AUTO_ADD_SENSOR;
|
|
break;
|
|
default:
|
|
return false; // Unknown type, don't auto-add
|
|
}
|
|
|
|
return (_prefs.autoadd_config & type_bit) != 0;
|
|
}
|
|
|
|
bool MyMesh::shouldOverwriteWhenFull() const {
|
|
return (_prefs.autoadd_config & AUTO_ADD_OVERWRITE_OLDEST) != 0;
|
|
}
|
|
|
|
uint8_t MyMesh::getAutoAddMaxHops() const {
|
|
return _prefs.autoadd_max_hops;
|
|
}
|
|
|
|
void MyMesh::onContactOverwrite(const uint8_t* pub_key) {
|
|
_store->deleteBlobByKey(pub_key, PUB_KEY_SIZE); // delete from storage
|
|
if (_serial->isConnected()) {
|
|
out_frame[0] = PUSH_CODE_CONTACT_DELETED;
|
|
memcpy(&out_frame[1], pub_key, PUB_KEY_SIZE);
|
|
_serial->writeFrame(out_frame, 1 + PUB_KEY_SIZE);
|
|
}
|
|
}
|
|
|
|
void MyMesh::onContactsFull() {
|
|
if (_serial->isConnected()) {
|
|
out_frame[0] = PUSH_CODE_CONTACTS_FULL;
|
|
_serial->writeFrame(out_frame, 1);
|
|
}
|
|
}
|
|
|
|
void MyMesh::onDiscoveredContact(ContactInfo &contact, bool is_new, uint8_t path_len, const uint8_t* path) {
|
|
if (_serial->isConnected()) {
|
|
if (is_new) {
|
|
writeContactRespFrame(PUSH_CODE_NEW_ADVERT, contact);
|
|
} else {
|
|
out_frame[0] = PUSH_CODE_ADVERT;
|
|
memcpy(&out_frame[1], contact.id.pub_key, PUB_KEY_SIZE);
|
|
_serial->writeFrame(out_frame, 1 + PUB_KEY_SIZE);
|
|
}
|
|
} else {
|
|
#ifdef DISPLAY_CLASS
|
|
if (_ui) _ui->notify(UIEventType::newContactMessage);
|
|
#endif
|
|
}
|
|
|
|
// add inbound-path to mem cache
|
|
if (path && mesh::Packet::isValidPathLen(path_len)) { // check path is valid
|
|
AdvertPath* p = advert_paths;
|
|
uint32_t oldest = 0xFFFFFFFF;
|
|
for (int i = 0; i < ADVERT_PATH_TABLE_SIZE; i++) { // check if already in table, otherwise evict oldest
|
|
if (memcmp(advert_paths[i].pubkey_prefix, contact.id.pub_key, sizeof(AdvertPath::pubkey_prefix)) == 0) {
|
|
p = &advert_paths[i]; // found
|
|
break;
|
|
}
|
|
if (advert_paths[i].recv_timestamp < oldest) {
|
|
oldest = advert_paths[i].recv_timestamp;
|
|
p = &advert_paths[i];
|
|
}
|
|
}
|
|
|
|
memcpy(p->pubkey_prefix, contact.id.pub_key, sizeof(p->pubkey_prefix));
|
|
strcpy(p->name, contact.name);
|
|
p->recv_timestamp = getRTCClock()->getCurrentTime();
|
|
p->path_len = mesh::Packet::copyPath(p->path, path, path_len);
|
|
}
|
|
|
|
if (!is_new) dirty_contacts_expiry = futureMillis(LAZY_CONTACTS_WRITE_DELAY); // only schedule lazy write for contacts that are in contacts[]
|
|
}
|
|
|
|
static int sort_by_recent(const void *a, const void *b) {
|
|
return ((AdvertPath *) b)->recv_timestamp - ((AdvertPath *) a)->recv_timestamp;
|
|
}
|
|
|
|
int MyMesh::getRecentlyHeard(AdvertPath dest[], int max_num) {
|
|
if (max_num > ADVERT_PATH_TABLE_SIZE) max_num = ADVERT_PATH_TABLE_SIZE;
|
|
qsort(advert_paths, ADVERT_PATH_TABLE_SIZE, sizeof(advert_paths[0]), sort_by_recent);
|
|
|
|
for (int i = 0; i < max_num; i++) {
|
|
dest[i] = advert_paths[i];
|
|
}
|
|
return max_num;
|
|
}
|
|
|
|
void MyMesh::onContactPathUpdated(const ContactInfo &contact) {
|
|
out_frame[0] = PUSH_CODE_PATH_UPDATED;
|
|
memcpy(&out_frame[1], contact.id.pub_key, PUB_KEY_SIZE);
|
|
_serial->writeFrame(out_frame, 1 + PUB_KEY_SIZE); // NOTE: app may not be connected
|
|
|
|
dirty_contacts_expiry = futureMillis(LAZY_CONTACTS_WRITE_DELAY);
|
|
}
|
|
|
|
ContactInfo* MyMesh::processAck(const uint8_t *data) {
|
|
// see if matches any in a table
|
|
for (int i = 0; i < EXPECTED_ACK_TABLE_SIZE; i++) {
|
|
if (memcmp(data, &expected_ack_table[i].ack, 4) == 0) { // got an ACK from recipient
|
|
out_frame[0] = PUSH_CODE_SEND_CONFIRMED;
|
|
memcpy(&out_frame[1], data, 4);
|
|
uint32_t trip_time = _ms->getMillis() - expected_ack_table[i].msg_sent;
|
|
memcpy(&out_frame[5], &trip_time, 4);
|
|
_serial->writeFrame(out_frame, 9);
|
|
|
|
// NOTE: the same ACK can be received multiple times!
|
|
expected_ack_table[i].ack = 0; // clear expected hash, now that we have received ACK
|
|
return expected_ack_table[i].contact;
|
|
}
|
|
}
|
|
return checkConnectionsAck(data);
|
|
}
|
|
|
|
void MyMesh::queueMessage(const ContactInfo &from, uint8_t txt_type, mesh::Packet *pkt,
|
|
uint32_t sender_timestamp, const uint8_t *extra, int extra_len, const char *text) {
|
|
int i = 0;
|
|
if (app_target_ver >= 3) {
|
|
out_frame[i++] = RESP_CODE_CONTACT_MSG_RECV_V3;
|
|
out_frame[i++] = (int8_t)(pkt->getSNR() * 4);
|
|
out_frame[i++] = 0; // reserved1
|
|
out_frame[i++] = 0; // reserved2
|
|
} else {
|
|
out_frame[i++] = RESP_CODE_CONTACT_MSG_RECV;
|
|
}
|
|
memcpy(&out_frame[i], from.id.pub_key, 6);
|
|
i += 6; // just 6-byte prefix
|
|
uint8_t path_len = out_frame[i++] = pkt->isRouteFlood() ? pkt->path_len : 0xFF;
|
|
out_frame[i++] = txt_type;
|
|
memcpy(&out_frame[i], &sender_timestamp, 4);
|
|
i += 4;
|
|
if (extra_len > 0) {
|
|
memcpy(&out_frame[i], extra, extra_len);
|
|
i += extra_len;
|
|
}
|
|
int tlen = strlen(text); // TODO: UTF-8 ??
|
|
if (i + tlen > MAX_FRAME_SIZE) {
|
|
tlen = MAX_FRAME_SIZE - i;
|
|
}
|
|
memcpy(&out_frame[i], text, tlen);
|
|
i += tlen;
|
|
addToOfflineQueue(out_frame, i);
|
|
|
|
if (_serial->isConnected()) {
|
|
uint8_t frame[1];
|
|
frame[0] = PUSH_CODE_MSG_WAITING; // send push 'tickle'
|
|
_serial->writeFrame(frame, 1);
|
|
}
|
|
|
|
#ifdef DISPLAY_CLASS
|
|
// we only want to show text messages on display, not cli data
|
|
bool should_display = txt_type == TXT_TYPE_PLAIN || txt_type == TXT_TYPE_SIGNED_PLAIN;
|
|
if (should_display && _ui) {
|
|
_ui->newMsg(path_len, from.name, text, offline_queue_len);
|
|
if (!_serial->isConnected()) {
|
|
_ui->notify(UIEventType::contactMessage);
|
|
}
|
|
}
|
|
#endif
|
|
}
|
|
|
|
bool MyMesh::filterRecvFloodPacket(mesh::Packet* packet) {
|
|
// REVISIT: try to determine which Region (from transport_codes[1]) that Sender is indicating for replies/responses
|
|
// if unknown, fallback to finding Region from transport_codes[0], the 'scope' used by Sender
|
|
return false;
|
|
}
|
|
|
|
bool MyMesh::allowPacketForward(const mesh::Packet* packet) {
|
|
return _prefs.client_repeat != 0;
|
|
}
|
|
|
|
void MyMesh::sendFloodScoped(const ContactInfo& recipient, mesh::Packet* pkt, uint32_t delay_millis) {
|
|
// TODO: dynamic send_scope, depending on recipient and current 'home' Region
|
|
if (send_scope.isNull()) {
|
|
sendFlood(pkt, delay_millis, _prefs.path_hash_mode + 1);
|
|
} else {
|
|
uint16_t codes[2];
|
|
codes[0] = send_scope.calcTransportCode(pkt);
|
|
codes[1] = 0; // REVISIT: set to 'home' Region, for sender/return region?
|
|
sendFlood(pkt, codes, delay_millis, _prefs.path_hash_mode + 1);
|
|
}
|
|
}
|
|
void MyMesh::sendFloodScoped(const mesh::GroupChannel& channel, mesh::Packet* pkt, uint32_t delay_millis) {
|
|
// TODO: have per-channel send_scope
|
|
if (send_scope.isNull()) {
|
|
sendFlood(pkt, delay_millis, _prefs.path_hash_mode + 1);
|
|
} else {
|
|
uint16_t codes[2];
|
|
codes[0] = send_scope.calcTransportCode(pkt);
|
|
codes[1] = 0; // REVISIT: set to 'home' Region, for sender/return region?
|
|
sendFlood(pkt, codes, delay_millis, _prefs.path_hash_mode + 1);
|
|
}
|
|
}
|
|
|
|
void MyMesh::onMessageRecv(const ContactInfo &from, mesh::Packet *pkt, uint32_t sender_timestamp,
|
|
const char *text) {
|
|
markConnectionActive(from); // in case this is from a server, and we have a connection
|
|
queueMessage(from, TXT_TYPE_PLAIN, pkt, sender_timestamp, NULL, 0, text);
|
|
}
|
|
|
|
void MyMesh::onCommandDataRecv(const ContactInfo &from, mesh::Packet *pkt, uint32_t sender_timestamp,
|
|
const char *text) {
|
|
markConnectionActive(from); // in case this is from a server, and we have a connection
|
|
queueMessage(from, TXT_TYPE_CLI_DATA, pkt, sender_timestamp, NULL, 0, text);
|
|
}
|
|
|
|
void MyMesh::onSignedMessageRecv(const ContactInfo &from, mesh::Packet *pkt, uint32_t sender_timestamp,
|
|
const uint8_t *sender_prefix, const char *text) {
|
|
markConnectionActive(from);
|
|
// from.sync_since change needs to be persisted
|
|
dirty_contacts_expiry = futureMillis(LAZY_CONTACTS_WRITE_DELAY);
|
|
queueMessage(from, TXT_TYPE_SIGNED_PLAIN, pkt, sender_timestamp, sender_prefix, 4, text);
|
|
}
|
|
|
|
void MyMesh::onChannelMessageRecv(const mesh::GroupChannel &channel, mesh::Packet *pkt, uint32_t timestamp,
|
|
const char *text) {
|
|
int i = 0;
|
|
if (app_target_ver >= 3) {
|
|
out_frame[i++] = RESP_CODE_CHANNEL_MSG_RECV_V3;
|
|
out_frame[i++] = (int8_t)(pkt->getSNR() * 4);
|
|
out_frame[i++] = 0; // reserved1
|
|
out_frame[i++] = 0; // reserved2
|
|
} else {
|
|
out_frame[i++] = RESP_CODE_CHANNEL_MSG_RECV;
|
|
}
|
|
|
|
uint8_t channel_idx = findChannelIdx(channel);
|
|
out_frame[i++] = channel_idx;
|
|
uint8_t path_len = out_frame[i++] = pkt->isRouteFlood() ? pkt->path_len : 0xFF;
|
|
|
|
out_frame[i++] = TXT_TYPE_PLAIN;
|
|
memcpy(&out_frame[i], ×tamp, 4);
|
|
i += 4;
|
|
int tlen = strlen(text); // TODO: UTF-8 ??
|
|
if (i + tlen > MAX_FRAME_SIZE) {
|
|
tlen = MAX_FRAME_SIZE - i;
|
|
}
|
|
memcpy(&out_frame[i], text, tlen);
|
|
i += tlen;
|
|
addToOfflineQueue(out_frame, i);
|
|
|
|
if (_serial->isConnected()) {
|
|
uint8_t frame[1];
|
|
frame[0] = PUSH_CODE_MSG_WAITING; // send push 'tickle'
|
|
_serial->writeFrame(frame, 1);
|
|
} else {
|
|
#ifdef DISPLAY_CLASS
|
|
if (_ui) _ui->notify(UIEventType::channelMessage);
|
|
#endif
|
|
}
|
|
#ifdef DISPLAY_CLASS
|
|
// Get the channel name from the channel index
|
|
const char *channel_name = "Unknown";
|
|
ChannelDetails channel_details;
|
|
if (getChannel(channel_idx, channel_details)) {
|
|
channel_name = channel_details.name;
|
|
}
|
|
if (_ui) _ui->newMsg(path_len, channel_name, text, offline_queue_len);
|
|
#endif
|
|
}
|
|
|
|
uint8_t MyMesh::onContactRequest(const ContactInfo &contact, uint32_t sender_timestamp, const uint8_t *data,
|
|
uint8_t len, uint8_t *reply) {
|
|
if (data[0] == REQ_TYPE_GET_TELEMETRY_DATA) {
|
|
uint8_t permissions = 0;
|
|
uint8_t cp = contact.flags >> 1; // LSB used as 'favourite' bit (so only use upper bits)
|
|
|
|
if (_prefs.telemetry_mode_base == TELEM_MODE_ALLOW_ALL) {
|
|
permissions = TELEM_PERM_BASE;
|
|
} else if (_prefs.telemetry_mode_base == TELEM_MODE_ALLOW_FLAGS) {
|
|
permissions = cp & TELEM_PERM_BASE;
|
|
}
|
|
|
|
if (_prefs.telemetry_mode_loc == TELEM_MODE_ALLOW_ALL) {
|
|
permissions |= TELEM_PERM_LOCATION;
|
|
} else if (_prefs.telemetry_mode_loc == TELEM_MODE_ALLOW_FLAGS) {
|
|
permissions |= cp & TELEM_PERM_LOCATION;
|
|
}
|
|
|
|
if (_prefs.telemetry_mode_env == TELEM_MODE_ALLOW_ALL) {
|
|
permissions |= TELEM_PERM_ENVIRONMENT;
|
|
} else if (_prefs.telemetry_mode_env == TELEM_MODE_ALLOW_FLAGS) {
|
|
permissions |= cp & TELEM_PERM_ENVIRONMENT;
|
|
}
|
|
|
|
uint8_t perm_mask = ~(data[1]); // NEW: first reserved byte (of 4), is now inverse mask to apply to permissions
|
|
permissions &= perm_mask;
|
|
|
|
if (permissions & TELEM_PERM_BASE) { // only respond if base permission bit is set
|
|
telemetry.reset();
|
|
telemetry.addVoltage(TELEM_CHANNEL_SELF, (float)board.getBattMilliVolts() / 1000.0f);
|
|
// query other sensors -- target specific
|
|
sensors.querySensors(permissions, telemetry);
|
|
|
|
memcpy(reply, &sender_timestamp,
|
|
4); // reflect sender_timestamp back in response packet (kind of like a 'tag')
|
|
|
|
uint8_t tlen = telemetry.getSize();
|
|
memcpy(&reply[4], telemetry.getBuffer(), tlen);
|
|
return 4 + tlen;
|
|
}
|
|
}
|
|
return 0; // unknown
|
|
}
|
|
|
|
void MyMesh::onContactResponse(const ContactInfo &contact, const uint8_t *data, uint8_t len) {
|
|
uint32_t tag;
|
|
memcpy(&tag, data, 4);
|
|
|
|
if (pending_login && memcmp(&pending_login, contact.id.pub_key, 4) == 0) { // check for login response
|
|
// yes, is response to pending sendLogin()
|
|
pending_login = 0;
|
|
|
|
int i = 0;
|
|
if (memcmp(&data[4], "OK", 2) == 0) { // legacy Repeater login OK response
|
|
out_frame[i++] = PUSH_CODE_LOGIN_SUCCESS;
|
|
out_frame[i++] = 0; // legacy: is_admin = false
|
|
memcpy(&out_frame[i], contact.id.pub_key, 6);
|
|
i += 6; // pub_key_prefix
|
|
} else if (data[4] == RESP_SERVER_LOGIN_OK) { // new login response
|
|
uint16_t keep_alive_secs = ((uint16_t)data[5]) * 16;
|
|
if (keep_alive_secs > 0) {
|
|
startConnection(contact, keep_alive_secs);
|
|
}
|
|
out_frame[i++] = PUSH_CODE_LOGIN_SUCCESS;
|
|
out_frame[i++] = data[6]; // permissions (eg. is_admin)
|
|
memcpy(&out_frame[i], contact.id.pub_key, 6);
|
|
i += 6; // pub_key_prefix
|
|
memcpy(&out_frame[i], &tag, 4);
|
|
i += 4; // NEW: include server timestamp
|
|
out_frame[i++] = data[7]; // NEW (v7): ACL permissions
|
|
out_frame[i++] = data[12]; // FIRMWARE_VER_LEVEL
|
|
} else {
|
|
out_frame[i++] = PUSH_CODE_LOGIN_FAIL;
|
|
out_frame[i++] = 0; // reserved
|
|
memcpy(&out_frame[i], contact.id.pub_key, 6);
|
|
i += 6; // pub_key_prefix
|
|
}
|
|
_serial->writeFrame(out_frame, i);
|
|
} else if (len > 4 && // check for status response
|
|
pending_status &&
|
|
memcmp(&pending_status, contact.id.pub_key, 4) == 0 // legacy matching scheme
|
|
// FUTURE: tag == pending_status
|
|
) {
|
|
pending_status = 0;
|
|
|
|
int i = 0;
|
|
out_frame[i++] = PUSH_CODE_STATUS_RESPONSE;
|
|
out_frame[i++] = 0; // reserved
|
|
memcpy(&out_frame[i], contact.id.pub_key, 6);
|
|
i += 6; // pub_key_prefix
|
|
memcpy(&out_frame[i], &data[4], len - 4);
|
|
i += (len - 4);
|
|
_serial->writeFrame(out_frame, i);
|
|
} else if (len > 4 && tag == pending_telemetry) { // check for matching response tag
|
|
pending_telemetry = 0;
|
|
|
|
int i = 0;
|
|
out_frame[i++] = PUSH_CODE_TELEMETRY_RESPONSE;
|
|
out_frame[i++] = 0; // reserved
|
|
memcpy(&out_frame[i], contact.id.pub_key, 6);
|
|
i += 6; // pub_key_prefix
|
|
memcpy(&out_frame[i], &data[4], len - 4);
|
|
i += (len - 4);
|
|
_serial->writeFrame(out_frame, i);
|
|
} else if (len > 4 && tag == pending_req) { // check for matching response tag
|
|
pending_req = 0;
|
|
|
|
int i = 0;
|
|
out_frame[i++] = PUSH_CODE_BINARY_RESPONSE;
|
|
out_frame[i++] = 0; // reserved
|
|
memcpy(&out_frame[i], &tag, 4); // app needs to match this to RESP_CODE_SENT.tag
|
|
i += 4;
|
|
memcpy(&out_frame[i], &data[4], len - 4);
|
|
i += (len - 4);
|
|
_serial->writeFrame(out_frame, i);
|
|
}
|
|
}
|
|
|
|
bool MyMesh::onContactPathRecv(ContactInfo& contact, uint8_t* in_path, uint8_t in_path_len, uint8_t* out_path, uint8_t out_path_len, uint8_t extra_type, uint8_t* extra, uint8_t extra_len) {
|
|
if (extra_type == PAYLOAD_TYPE_RESPONSE && extra_len > 4) {
|
|
uint32_t tag;
|
|
memcpy(&tag, extra, 4);
|
|
|
|
if (tag == pending_discovery) { // check for matching response tag)
|
|
pending_discovery = 0;
|
|
|
|
if (!mesh::Packet::isValidPathLen(in_path_len) || !mesh::Packet::isValidPathLen(out_path_len)) {
|
|
MESH_DEBUG_PRINTLN("onContactPathRecv, invalid path sizes: %d, %d", in_path_len, out_path_len);
|
|
} else {
|
|
int i = 0;
|
|
out_frame[i++] = PUSH_CODE_PATH_DISCOVERY_RESPONSE;
|
|
out_frame[i++] = 0; // reserved
|
|
memcpy(&out_frame[i], contact.id.pub_key, 6);
|
|
i += 6; // pub_key_prefix
|
|
out_frame[i++] = out_path_len;
|
|
i += mesh::Packet::writePath(&out_frame[i], out_path, out_path_len);
|
|
out_frame[i++] = in_path_len;
|
|
i += mesh::Packet::writePath(&out_frame[i], in_path, in_path_len);
|
|
// NOTE: telemetry data in 'extra' is discarded at present
|
|
|
|
_serial->writeFrame(out_frame, i);
|
|
}
|
|
return false; // DON'T send reciprocal path!
|
|
}
|
|
}
|
|
// let base class handle received path and data
|
|
return BaseChatMesh::onContactPathRecv(contact, in_path, in_path_len, out_path, out_path_len, extra_type, extra, extra_len);
|
|
}
|
|
|
|
void MyMesh::onControlDataRecv(mesh::Packet *packet) {
|
|
if (packet->payload_len + 4 > sizeof(out_frame)) {
|
|
MESH_DEBUG_PRINTLN("onControlDataRecv(), payload_len too long: %d", packet->payload_len);
|
|
return;
|
|
}
|
|
int i = 0;
|
|
out_frame[i++] = PUSH_CODE_CONTROL_DATA;
|
|
out_frame[i++] = (int8_t)(_radio->getLastSNR() * 4);
|
|
out_frame[i++] = (int8_t)(_radio->getLastRSSI());
|
|
out_frame[i++] = packet->path_len;
|
|
memcpy(&out_frame[i], packet->payload, packet->payload_len);
|
|
i += packet->payload_len;
|
|
|
|
if (_serial->isConnected()) {
|
|
_serial->writeFrame(out_frame, i);
|
|
} else {
|
|
MESH_DEBUG_PRINTLN("onControlDataRecv(), data received while app offline");
|
|
}
|
|
}
|
|
|
|
void MyMesh::onRawDataRecv(mesh::Packet *packet) {
|
|
if (packet->payload_len + 4 > sizeof(out_frame)) {
|
|
MESH_DEBUG_PRINTLN("onRawDataRecv(), payload_len too long: %d", packet->payload_len);
|
|
return;
|
|
}
|
|
int i = 0;
|
|
out_frame[i++] = PUSH_CODE_RAW_DATA;
|
|
out_frame[i++] = (int8_t)(_radio->getLastSNR() * 4);
|
|
out_frame[i++] = (int8_t)(_radio->getLastRSSI());
|
|
out_frame[i++] = 0xFF; // reserved (possibly path_len in future)
|
|
memcpy(&out_frame[i], packet->payload, packet->payload_len);
|
|
i += packet->payload_len;
|
|
|
|
if (_serial->isConnected()) {
|
|
_serial->writeFrame(out_frame, i);
|
|
} else {
|
|
MESH_DEBUG_PRINTLN("onRawDataRecv(), data received while app offline");
|
|
}
|
|
}
|
|
|
|
void MyMesh::onTraceRecv(mesh::Packet *packet, uint32_t tag, uint32_t auth_code, uint8_t flags,
|
|
const uint8_t *path_snrs, const uint8_t *path_hashes, uint8_t path_len) {
|
|
uint8_t path_sz = flags & 0x03; // NEW v1.11+
|
|
if (12 + path_len + (path_len >> path_sz) + 1 > sizeof(out_frame)) {
|
|
MESH_DEBUG_PRINTLN("onTraceRecv(), path_len is too long: %d", (uint32_t)path_len);
|
|
return;
|
|
}
|
|
int i = 0;
|
|
out_frame[i++] = PUSH_CODE_TRACE_DATA;
|
|
out_frame[i++] = 0; // reserved
|
|
out_frame[i++] = path_len;
|
|
out_frame[i++] = flags;
|
|
memcpy(&out_frame[i], &tag, 4);
|
|
i += 4;
|
|
memcpy(&out_frame[i], &auth_code, 4);
|
|
i += 4;
|
|
memcpy(&out_frame[i], path_hashes, path_len);
|
|
i += path_len;
|
|
|
|
memcpy(&out_frame[i], path_snrs, path_len >> path_sz);
|
|
i += path_len >> path_sz;
|
|
out_frame[i++] = (int8_t)(packet->getSNR() * 4); // extra/final SNR (to this node)
|
|
|
|
if (_serial->isConnected()) {
|
|
_serial->writeFrame(out_frame, i);
|
|
} else {
|
|
MESH_DEBUG_PRINTLN("onTraceRecv(), data received while app offline");
|
|
}
|
|
}
|
|
|
|
uint32_t MyMesh::calcFloodTimeoutMillisFor(uint32_t pkt_airtime_millis) const {
|
|
return SEND_TIMEOUT_BASE_MILLIS + (FLOOD_SEND_TIMEOUT_FACTOR * pkt_airtime_millis);
|
|
}
|
|
uint32_t MyMesh::calcDirectTimeoutMillisFor(uint32_t pkt_airtime_millis, uint8_t path_len) const {
|
|
uint8_t path_hash_count = path_len & 63;
|
|
return SEND_TIMEOUT_BASE_MILLIS +
|
|
((pkt_airtime_millis * DIRECT_SEND_PERHOP_FACTOR + DIRECT_SEND_PERHOP_EXTRA_MILLIS) *
|
|
(path_hash_count + 1));
|
|
}
|
|
|
|
void MyMesh::onSendTimeout() {}
|
|
|
|
MyMesh::MyMesh(mesh::Radio &radio, mesh::RNG &rng, mesh::RTCClock &rtc, SimpleMeshTables &tables, DataStore& store, AbstractUITask* ui)
|
|
: BaseChatMesh(radio, *new ArduinoMillis(), rng, rtc, *new StaticPoolPacketManager(16), tables),
|
|
_serial(NULL), telemetry(MAX_PACKET_PAYLOAD - 4), _store(&store), _ui(ui) {
|
|
_iter_started = false;
|
|
_cli_rescue = false;
|
|
offline_queue_len = 0;
|
|
app_target_ver = 0;
|
|
clearPendingReqs();
|
|
next_ack_idx = 0;
|
|
sign_data = NULL;
|
|
dirty_contacts_expiry = 0;
|
|
memset(advert_paths, 0, sizeof(advert_paths));
|
|
memset(send_scope.key, 0, sizeof(send_scope.key));
|
|
|
|
// defaults
|
|
memset(&_prefs, 0, sizeof(_prefs));
|
|
_prefs.airtime_factor = 1.0;
|
|
strcpy(_prefs.node_name, "NONAME");
|
|
_prefs.freq = LORA_FREQ;
|
|
_prefs.sf = LORA_SF;
|
|
_prefs.bw = LORA_BW;
|
|
_prefs.cr = LORA_CR;
|
|
_prefs.tx_power_dbm = LORA_TX_POWER;
|
|
_prefs.gps_enabled = 0; // GPS disabled by default
|
|
_prefs.gps_interval = 0; // No automatic GPS updates by default
|
|
//_prefs.rx_delay_base = 10.0f; enable once new algo fixed
|
|
}
|
|
|
|
void MyMesh::begin(bool has_display) {
|
|
BaseChatMesh::begin();
|
|
|
|
if (!_store->loadMainIdentity(self_id)) {
|
|
self_id = radio_new_identity(); // create new random identity
|
|
int count = 0;
|
|
while (count < 10 && (self_id.pub_key[0] == 0x00 || self_id.pub_key[0] == 0xFF)) { // reserved id hashes
|
|
self_id = radio_new_identity();
|
|
count++;
|
|
}
|
|
_store->saveMainIdentity(self_id);
|
|
}
|
|
|
|
// if name is provided as a build flag, use that as default node name instead
|
|
#ifdef ADVERT_NAME
|
|
strcpy(_prefs.node_name, ADVERT_NAME);
|
|
#else
|
|
// use hex of first 4 bytes of identity public key as default node name
|
|
char pub_key_hex[10];
|
|
mesh::Utils::toHex(pub_key_hex, self_id.pub_key, 4);
|
|
strcpy(_prefs.node_name, pub_key_hex);
|
|
#endif
|
|
|
|
// load persisted prefs
|
|
_store->loadPrefs(_prefs, sensors.node_lat, sensors.node_lon);
|
|
|
|
// sanitise bad pref values
|
|
_prefs.rx_delay_base = constrain(_prefs.rx_delay_base, 0, 20.0f);
|
|
_prefs.airtime_factor = constrain(_prefs.airtime_factor, 0, 9.0f);
|
|
_prefs.freq = constrain(_prefs.freq, 400.0f, 2500.0f);
|
|
_prefs.bw = constrain(_prefs.bw, 7.8f, 500.0f);
|
|
_prefs.sf = constrain(_prefs.sf, 5, 12);
|
|
_prefs.cr = constrain(_prefs.cr, 5, 8);
|
|
_prefs.tx_power_dbm = constrain(_prefs.tx_power_dbm, -9, MAX_LORA_TX_POWER);
|
|
_prefs.gps_enabled = constrain(_prefs.gps_enabled, 0, 1); // Ensure boolean 0 or 1
|
|
_prefs.gps_interval = constrain(_prefs.gps_interval, 0, 86400); // Max 24 hours
|
|
|
|
#ifdef BLE_PIN_CODE // 123456 by default
|
|
if (_prefs.ble_pin == 0) {
|
|
#ifdef DISPLAY_CLASS
|
|
if (has_display && BLE_PIN_CODE == 123456) {
|
|
StdRNG rng;
|
|
_active_ble_pin = rng.nextInt(100000, 999999); // random pin each session
|
|
} else {
|
|
_active_ble_pin = BLE_PIN_CODE; // otherwise static pin
|
|
}
|
|
#else
|
|
_active_ble_pin = BLE_PIN_CODE; // otherwise static pin
|
|
#endif
|
|
} else {
|
|
_active_ble_pin = _prefs.ble_pin;
|
|
}
|
|
#else
|
|
_active_ble_pin = 0;
|
|
#endif
|
|
|
|
resetContacts();
|
|
_store->loadContacts(this);
|
|
bootstrapRTCfromContacts();
|
|
addChannel("Public", PUBLIC_GROUP_PSK); // pre-configure Andy's public channel
|
|
_store->loadChannels(this);
|
|
|
|
radio_set_params(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr);
|
|
radio_set_tx_power(_prefs.tx_power_dbm);
|
|
}
|
|
|
|
const char *MyMesh::getNodeName() {
|
|
return _prefs.node_name;
|
|
}
|
|
NodePrefs *MyMesh::getNodePrefs() {
|
|
return &_prefs;
|
|
}
|
|
uint32_t MyMesh::getBLEPin() {
|
|
return _active_ble_pin;
|
|
}
|
|
|
|
struct FreqRange {
|
|
uint32_t lower_freq, upper_freq;
|
|
};
|
|
|
|
static FreqRange repeat_freq_ranges[] = {
|
|
{ 433000, 433000 },
|
|
{ 869000, 869000 },
|
|
{ 918000, 918000 }
|
|
};
|
|
|
|
bool MyMesh::isValidClientRepeatFreq(uint32_t f) const {
|
|
for (int i = 0; i < sizeof(repeat_freq_ranges)/sizeof(repeat_freq_ranges[0]); i++) {
|
|
auto r = &repeat_freq_ranges[i];
|
|
if (f >= r->lower_freq && f <= r->upper_freq) return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
void MyMesh::startInterface(BaseSerialInterface &serial) {
|
|
_serial = &serial;
|
|
serial.enable();
|
|
}
|
|
|
|
void MyMesh::handleCmdFrame(size_t len) {
|
|
if (cmd_frame[0] == CMD_DEVICE_QEURY && len >= 2) { // sent when app establishes connection
|
|
app_target_ver = cmd_frame[1]; // which version of protocol does app understand
|
|
|
|
int i = 0;
|
|
out_frame[i++] = RESP_CODE_DEVICE_INFO;
|
|
out_frame[i++] = FIRMWARE_VER_CODE;
|
|
out_frame[i++] = MAX_CONTACTS / 2; // v3+
|
|
out_frame[i++] = MAX_GROUP_CHANNELS; // v3+
|
|
memcpy(&out_frame[i], &_prefs.ble_pin, 4);
|
|
i += 4;
|
|
memset(&out_frame[i], 0, 12);
|
|
strcpy((char *)&out_frame[i], FIRMWARE_BUILD_DATE);
|
|
i += 12;
|
|
StrHelper::strzcpy((char *)&out_frame[i], board.getManufacturerName(), 40);
|
|
i += 40;
|
|
StrHelper::strzcpy((char *)&out_frame[i], FIRMWARE_VERSION, 20);
|
|
i += 20;
|
|
out_frame[i++] = _prefs.client_repeat; // v9+
|
|
out_frame[i++] = _prefs.path_hash_mode; // v10+
|
|
_serial->writeFrame(out_frame, i);
|
|
} else if (cmd_frame[0] == CMD_APP_START &&
|
|
len >= 8) { // sent when app establishes connection, respond with node ID
|
|
// cmd_frame[1..7] reserved future
|
|
char *app_name = (char *)&cmd_frame[8];
|
|
cmd_frame[len] = 0; // make app_name null terminated
|
|
MESH_DEBUG_PRINTLN("App %s connected", app_name);
|
|
|
|
_iter_started = false; // stop any left-over ContactsIterator
|
|
int i = 0;
|
|
out_frame[i++] = RESP_CODE_SELF_INFO;
|
|
out_frame[i++] = ADV_TYPE_CHAT; // what this node Advert identifies as (maybe node's pronouns too?? :-)
|
|
out_frame[i++] = _prefs.tx_power_dbm;
|
|
out_frame[i++] = MAX_LORA_TX_POWER;
|
|
memcpy(&out_frame[i], self_id.pub_key, PUB_KEY_SIZE);
|
|
i += PUB_KEY_SIZE;
|
|
|
|
int32_t lat, lon;
|
|
lat = (sensors.node_lat * 1000000.0);
|
|
lon = (sensors.node_lon * 1000000.0);
|
|
memcpy(&out_frame[i], &lat, 4);
|
|
i += 4;
|
|
memcpy(&out_frame[i], &lon, 4);
|
|
i += 4;
|
|
out_frame[i++] = _prefs.multi_acks; // new v7+
|
|
out_frame[i++] = _prefs.advert_loc_policy;
|
|
out_frame[i++] = (_prefs.telemetry_mode_env << 4) | (_prefs.telemetry_mode_loc << 2) |
|
|
(_prefs.telemetry_mode_base); // v5+
|
|
out_frame[i++] = _prefs.manual_add_contacts;
|
|
|
|
uint32_t freq = _prefs.freq * 1000;
|
|
memcpy(&out_frame[i], &freq, 4);
|
|
i += 4;
|
|
uint32_t bw = _prefs.bw * 1000;
|
|
memcpy(&out_frame[i], &bw, 4);
|
|
i += 4;
|
|
out_frame[i++] = _prefs.sf;
|
|
out_frame[i++] = _prefs.cr;
|
|
|
|
int tlen = strlen(_prefs.node_name); // revisit: UTF_8 ??
|
|
memcpy(&out_frame[i], _prefs.node_name, tlen);
|
|
i += tlen;
|
|
_serial->writeFrame(out_frame, i);
|
|
} else if (cmd_frame[0] == CMD_SEND_TXT_MSG && len >= 14) {
|
|
int i = 1;
|
|
uint8_t txt_type = cmd_frame[i++];
|
|
uint8_t attempt = cmd_frame[i++];
|
|
uint32_t msg_timestamp;
|
|
memcpy(&msg_timestamp, &cmd_frame[i], 4);
|
|
i += 4;
|
|
uint8_t *pub_key_prefix = &cmd_frame[i];
|
|
i += 6;
|
|
ContactInfo *recipient = lookupContactByPubKey(pub_key_prefix, 6);
|
|
if (recipient && (txt_type == TXT_TYPE_PLAIN || txt_type == TXT_TYPE_CLI_DATA)) {
|
|
char *text = (char *)&cmd_frame[i];
|
|
int tlen = len - i;
|
|
uint32_t est_timeout;
|
|
text[tlen] = 0; // ensure null
|
|
int result;
|
|
uint32_t expected_ack;
|
|
if (txt_type == TXT_TYPE_CLI_DATA) {
|
|
msg_timestamp = getRTCClock()->getCurrentTimeUnique(); // Use node's RTC instead of app timestamp to avoid tripping replay protection
|
|
result = sendCommandData(*recipient, msg_timestamp, attempt, text, est_timeout);
|
|
expected_ack = 0; // no Ack expected
|
|
} else {
|
|
result = sendMessage(*recipient, msg_timestamp, attempt, text, expected_ack, est_timeout);
|
|
}
|
|
// TODO: add expected ACK to table
|
|
if (result == MSG_SEND_FAILED) {
|
|
writeErrFrame(ERR_CODE_TABLE_FULL);
|
|
} else {
|
|
if (expected_ack) {
|
|
expected_ack_table[next_ack_idx].msg_sent = _ms->getMillis(); // add to circular table
|
|
expected_ack_table[next_ack_idx].ack = expected_ack;
|
|
expected_ack_table[next_ack_idx].contact = recipient;
|
|
next_ack_idx = (next_ack_idx + 1) % EXPECTED_ACK_TABLE_SIZE;
|
|
}
|
|
|
|
out_frame[0] = RESP_CODE_SENT;
|
|
out_frame[1] = (result == MSG_SEND_SENT_FLOOD) ? 1 : 0;
|
|
memcpy(&out_frame[2], &expected_ack, 4);
|
|
memcpy(&out_frame[6], &est_timeout, 4);
|
|
_serial->writeFrame(out_frame, 10);
|
|
}
|
|
} else {
|
|
writeErrFrame(recipient == NULL
|
|
? ERR_CODE_NOT_FOUND
|
|
: ERR_CODE_UNSUPPORTED_CMD); // unknown recipient, or unsuported TXT_TYPE_*
|
|
}
|
|
} else if (cmd_frame[0] == CMD_SEND_CHANNEL_TXT_MSG) { // send GroupChannel msg
|
|
int i = 1;
|
|
uint8_t txt_type = cmd_frame[i++]; // should be TXT_TYPE_PLAIN
|
|
uint8_t channel_idx = cmd_frame[i++];
|
|
uint32_t msg_timestamp;
|
|
memcpy(&msg_timestamp, &cmd_frame[i], 4);
|
|
i += 4;
|
|
const char *text = (char *)&cmd_frame[i];
|
|
|
|
if (txt_type != TXT_TYPE_PLAIN) {
|
|
writeErrFrame(ERR_CODE_UNSUPPORTED_CMD);
|
|
} else {
|
|
ChannelDetails channel;
|
|
bool success = getChannel(channel_idx, channel);
|
|
if (success && sendGroupMessage(msg_timestamp, channel.channel, _prefs.node_name, text, len - i)) {
|
|
writeOKFrame();
|
|
} else {
|
|
writeErrFrame(ERR_CODE_NOT_FOUND); // bad channel_idx
|
|
}
|
|
}
|
|
} else if (cmd_frame[0] == CMD_GET_CONTACTS) { // get Contact list
|
|
if (_iter_started) {
|
|
writeErrFrame(ERR_CODE_BAD_STATE); // iterator is currently busy
|
|
} else {
|
|
if (len >= 5) { // has optional 'since' param
|
|
memcpy(&_iter_filter_since, &cmd_frame[1], 4);
|
|
} else {
|
|
_iter_filter_since = 0;
|
|
}
|
|
|
|
uint8_t reply[5];
|
|
reply[0] = RESP_CODE_CONTACTS_START;
|
|
uint32_t count = getNumContacts(); // total, NOT filtered count
|
|
memcpy(&reply[1], &count, 4);
|
|
_serial->writeFrame(reply, 5);
|
|
|
|
// start iterator
|
|
_iter = startContactsIterator();
|
|
_iter_started = true;
|
|
_most_recent_lastmod = 0;
|
|
}
|
|
} else if (cmd_frame[0] == CMD_SET_ADVERT_NAME && len >= 2) {
|
|
int nlen = len - 1;
|
|
if (nlen > sizeof(_prefs.node_name) - 1) nlen = sizeof(_prefs.node_name) - 1; // max len
|
|
memcpy(_prefs.node_name, &cmd_frame[1], nlen);
|
|
_prefs.node_name[nlen] = 0; // null terminator
|
|
savePrefs();
|
|
writeOKFrame();
|
|
} else if (cmd_frame[0] == CMD_SET_ADVERT_LATLON && len >= 9) {
|
|
int32_t lat, lon, alt = 0;
|
|
memcpy(&lat, &cmd_frame[1], 4);
|
|
memcpy(&lon, &cmd_frame[5], 4);
|
|
if (len >= 13) {
|
|
memcpy(&alt, &cmd_frame[9], 4); // for FUTURE support
|
|
}
|
|
if (lat <= 90 * 1E6 && lat >= -90 * 1E6 && lon <= 180 * 1E6 && lon >= -180 * 1E6) {
|
|
sensors.node_lat = ((double)lat) / 1000000.0;
|
|
sensors.node_lon = ((double)lon) / 1000000.0;
|
|
savePrefs();
|
|
writeOKFrame();
|
|
} else {
|
|
writeErrFrame(ERR_CODE_ILLEGAL_ARG); // invalid geo coordinate
|
|
}
|
|
} else if (cmd_frame[0] == CMD_GET_DEVICE_TIME) {
|
|
uint8_t reply[5];
|
|
reply[0] = RESP_CODE_CURR_TIME;
|
|
uint32_t now = getRTCClock()->getCurrentTime();
|
|
memcpy(&reply[1], &now, 4);
|
|
_serial->writeFrame(reply, 5);
|
|
} else if (cmd_frame[0] == CMD_SET_DEVICE_TIME && len >= 5) {
|
|
uint32_t secs;
|
|
memcpy(&secs, &cmd_frame[1], 4);
|
|
uint32_t curr = getRTCClock()->getCurrentTime();
|
|
if (secs >= curr) {
|
|
getRTCClock()->setCurrentTime(secs);
|
|
writeOKFrame();
|
|
} else {
|
|
writeErrFrame(ERR_CODE_ILLEGAL_ARG);
|
|
}
|
|
} else if (cmd_frame[0] == CMD_SEND_SELF_ADVERT) {
|
|
mesh::Packet* pkt;
|
|
if (_prefs.advert_loc_policy == ADVERT_LOC_NONE) {
|
|
pkt = createSelfAdvert(_prefs.node_name);
|
|
} else {
|
|
pkt = createSelfAdvert(_prefs.node_name, sensors.node_lat, sensors.node_lon);
|
|
}
|
|
if (pkt) {
|
|
if (len >= 2 && cmd_frame[1] == 1) { // optional param (1 = flood, 0 = zero hop)
|
|
unsigned long delay_millis = 0;
|
|
sendFlood(pkt, delay_millis, _prefs.path_hash_mode + 1);
|
|
} else {
|
|
sendZeroHop(pkt);
|
|
}
|
|
writeOKFrame();
|
|
} else {
|
|
writeErrFrame(ERR_CODE_TABLE_FULL);
|
|
}
|
|
} else if (cmd_frame[0] == CMD_RESET_PATH && len >= 1 + 32) {
|
|
uint8_t *pub_key = &cmd_frame[1];
|
|
ContactInfo *recipient = lookupContactByPubKey(pub_key, PUB_KEY_SIZE);
|
|
if (recipient) {
|
|
recipient->out_path_len = OUT_PATH_UNKNOWN;
|
|
// recipient->lastmod = ?? shouldn't be needed, app already has this version of contact
|
|
dirty_contacts_expiry = futureMillis(LAZY_CONTACTS_WRITE_DELAY);
|
|
writeOKFrame();
|
|
} else {
|
|
writeErrFrame(ERR_CODE_NOT_FOUND); // unknown contact
|
|
}
|
|
} else if (cmd_frame[0] == CMD_ADD_UPDATE_CONTACT && len >= 1 + 32 + 2 + 1) {
|
|
uint8_t *pub_key = &cmd_frame[1];
|
|
ContactInfo *recipient = lookupContactByPubKey(pub_key, PUB_KEY_SIZE);
|
|
uint32_t last_mod = getRTCClock()->getCurrentTime(); // fallback value if not present in cmd_frame
|
|
if (recipient) {
|
|
updateContactFromFrame(*recipient, last_mod, cmd_frame, len);
|
|
recipient->lastmod = last_mod;
|
|
dirty_contacts_expiry = futureMillis(LAZY_CONTACTS_WRITE_DELAY);
|
|
writeOKFrame();
|
|
} else {
|
|
ContactInfo contact;
|
|
updateContactFromFrame(contact, last_mod, cmd_frame, len);
|
|
contact.lastmod = last_mod;
|
|
contact.sync_since = 0;
|
|
if (addContact(contact)) {
|
|
dirty_contacts_expiry = futureMillis(LAZY_CONTACTS_WRITE_DELAY);
|
|
writeOKFrame();
|
|
} else {
|
|
writeErrFrame(ERR_CODE_TABLE_FULL);
|
|
}
|
|
}
|
|
} else if (cmd_frame[0] == CMD_REMOVE_CONTACT) {
|
|
uint8_t *pub_key = &cmd_frame[1];
|
|
ContactInfo *recipient = lookupContactByPubKey(pub_key, PUB_KEY_SIZE);
|
|
if (recipient && removeContact(*recipient)) {
|
|
_store->deleteBlobByKey(pub_key, PUB_KEY_SIZE);
|
|
dirty_contacts_expiry = futureMillis(LAZY_CONTACTS_WRITE_DELAY);
|
|
writeOKFrame();
|
|
} else {
|
|
writeErrFrame(ERR_CODE_NOT_FOUND); // not found, or unable to remove
|
|
}
|
|
} else if (cmd_frame[0] == CMD_SHARE_CONTACT) {
|
|
uint8_t *pub_key = &cmd_frame[1];
|
|
ContactInfo *recipient = lookupContactByPubKey(pub_key, PUB_KEY_SIZE);
|
|
if (recipient) {
|
|
if (shareContactZeroHop(*recipient)) {
|
|
writeOKFrame();
|
|
} else {
|
|
writeErrFrame(ERR_CODE_TABLE_FULL); // unable to send
|
|
}
|
|
} else {
|
|
writeErrFrame(ERR_CODE_NOT_FOUND);
|
|
}
|
|
} else if (cmd_frame[0] == CMD_GET_CONTACT_BY_KEY) {
|
|
uint8_t *pub_key = &cmd_frame[1];
|
|
ContactInfo *contact = lookupContactByPubKey(pub_key, PUB_KEY_SIZE);
|
|
if (contact) {
|
|
writeContactRespFrame(RESP_CODE_CONTACT, *contact);
|
|
} else {
|
|
writeErrFrame(ERR_CODE_NOT_FOUND); // not found
|
|
}
|
|
} else if (cmd_frame[0] == CMD_EXPORT_CONTACT) {
|
|
if (len < 1 + PUB_KEY_SIZE) {
|
|
// export SELF
|
|
mesh::Packet* pkt;
|
|
if (_prefs.advert_loc_policy == ADVERT_LOC_NONE) {
|
|
pkt = createSelfAdvert(_prefs.node_name);
|
|
} else {
|
|
pkt = createSelfAdvert(_prefs.node_name, sensors.node_lat, sensors.node_lon);
|
|
}
|
|
if (pkt) {
|
|
pkt->header |= ROUTE_TYPE_FLOOD; // would normally be sent in this mode
|
|
|
|
out_frame[0] = RESP_CODE_EXPORT_CONTACT;
|
|
uint8_t out_len = pkt->writeTo(&out_frame[1]);
|
|
releasePacket(pkt); // undo the obtainNewPacket()
|
|
_serial->writeFrame(out_frame, out_len + 1);
|
|
} else {
|
|
writeErrFrame(ERR_CODE_TABLE_FULL); // Error
|
|
}
|
|
} else {
|
|
uint8_t *pub_key = &cmd_frame[1];
|
|
ContactInfo *recipient = lookupContactByPubKey(pub_key, PUB_KEY_SIZE);
|
|
uint8_t out_len;
|
|
if (recipient && (out_len = exportContact(*recipient, &out_frame[1])) > 0) {
|
|
out_frame[0] = RESP_CODE_EXPORT_CONTACT;
|
|
_serial->writeFrame(out_frame, out_len + 1);
|
|
} else {
|
|
writeErrFrame(ERR_CODE_NOT_FOUND); // not found
|
|
}
|
|
}
|
|
} else if (cmd_frame[0] == CMD_IMPORT_CONTACT && len > 2 + 32 + 64) {
|
|
if (importContact(&cmd_frame[1], len - 1)) {
|
|
writeOKFrame();
|
|
} else {
|
|
writeErrFrame(ERR_CODE_ILLEGAL_ARG);
|
|
}
|
|
} else if (cmd_frame[0] == CMD_SYNC_NEXT_MESSAGE) {
|
|
int out_len;
|
|
if ((out_len = getFromOfflineQueue(out_frame)) > 0) {
|
|
_serial->writeFrame(out_frame, out_len);
|
|
#ifdef DISPLAY_CLASS
|
|
if (_ui) _ui->msgRead(offline_queue_len);
|
|
#endif
|
|
} else {
|
|
out_frame[0] = RESP_CODE_NO_MORE_MESSAGES;
|
|
_serial->writeFrame(out_frame, 1);
|
|
}
|
|
} else if (cmd_frame[0] == CMD_SET_RADIO_PARAMS) {
|
|
int i = 1;
|
|
uint32_t freq;
|
|
memcpy(&freq, &cmd_frame[i], 4);
|
|
i += 4;
|
|
uint32_t bw;
|
|
memcpy(&bw, &cmd_frame[i], 4);
|
|
i += 4;
|
|
uint8_t sf = cmd_frame[i++];
|
|
uint8_t cr = cmd_frame[i++];
|
|
uint8_t repeat = 0; // default - false
|
|
if (len > i) {
|
|
repeat = cmd_frame[i++]; // FIRMWARE_VER_CODE 9+
|
|
}
|
|
|
|
if (repeat && !isValidClientRepeatFreq(freq)) {
|
|
writeErrFrame(ERR_CODE_ILLEGAL_ARG);
|
|
} else if (freq >= 300000 && freq <= 2500000 && sf >= 5 && sf <= 12 && cr >= 5 && cr <= 8 && bw >= 7000 &&
|
|
bw <= 500000) {
|
|
_prefs.sf = sf;
|
|
_prefs.cr = cr;
|
|
_prefs.freq = (float)freq / 1000.0;
|
|
_prefs.bw = (float)bw / 1000.0;
|
|
_prefs.client_repeat = repeat;
|
|
savePrefs();
|
|
|
|
radio_set_params(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr);
|
|
MESH_DEBUG_PRINTLN("OK: CMD_SET_RADIO_PARAMS: f=%d, bw=%d, sf=%d, cr=%d", freq, bw, (uint32_t)sf,
|
|
(uint32_t)cr);
|
|
|
|
writeOKFrame();
|
|
} else {
|
|
MESH_DEBUG_PRINTLN("Error: CMD_SET_RADIO_PARAMS: f=%d, bw=%d, sf=%d, cr=%d", freq, bw, (uint32_t)sf,
|
|
(uint32_t)cr);
|
|
writeErrFrame(ERR_CODE_ILLEGAL_ARG);
|
|
}
|
|
} else if (cmd_frame[0] == CMD_SET_RADIO_TX_POWER) {
|
|
int8_t power = (int8_t)cmd_frame[1];
|
|
if (power < -9 || power > MAX_LORA_TX_POWER) {
|
|
writeErrFrame(ERR_CODE_ILLEGAL_ARG);
|
|
} else {
|
|
_prefs.tx_power_dbm = power;
|
|
savePrefs();
|
|
radio_set_tx_power(_prefs.tx_power_dbm);
|
|
writeOKFrame();
|
|
}
|
|
} else if (cmd_frame[0] == CMD_SET_TUNING_PARAMS) {
|
|
int i = 1;
|
|
uint32_t rx, af;
|
|
memcpy(&rx, &cmd_frame[i], 4);
|
|
i += 4;
|
|
memcpy(&af, &cmd_frame[i], 4);
|
|
i += 4;
|
|
_prefs.rx_delay_base = ((float)rx) / 1000.0f;
|
|
_prefs.airtime_factor = ((float)af) / 1000.0f;
|
|
savePrefs();
|
|
writeOKFrame();
|
|
} else if (cmd_frame[0] == CMD_GET_TUNING_PARAMS) {
|
|
uint32_t rx = _prefs.rx_delay_base * 1000, af = _prefs.airtime_factor * 1000;
|
|
int i = 0;
|
|
out_frame[i++] = RESP_CODE_TUNING_PARAMS;
|
|
memcpy(&out_frame[i], &rx, 4); i += 4;
|
|
memcpy(&out_frame[i], &af, 4); i += 4;
|
|
_serial->writeFrame(out_frame, i);
|
|
} else if (cmd_frame[0] == CMD_SET_OTHER_PARAMS) {
|
|
_prefs.manual_add_contacts = cmd_frame[1];
|
|
if (len >= 3) {
|
|
_prefs.telemetry_mode_base = cmd_frame[2] & 0x03; // v5+
|
|
_prefs.telemetry_mode_loc = (cmd_frame[2] >> 2) & 0x03;
|
|
_prefs.telemetry_mode_env = (cmd_frame[2] >> 4) & 0x03;
|
|
|
|
if (len >= 4) {
|
|
_prefs.advert_loc_policy = cmd_frame[3];
|
|
if (len >= 5) {
|
|
_prefs.multi_acks = cmd_frame[4];
|
|
}
|
|
}
|
|
}
|
|
savePrefs();
|
|
writeOKFrame();
|
|
} else if (cmd_frame[0] == CMD_SET_PATH_HASH_MODE && cmd_frame[1] == 0 && len >= 3) {
|
|
if (cmd_frame[2] >= 3) {
|
|
writeErrFrame(ERR_CODE_ILLEGAL_ARG);
|
|
} else {
|
|
_prefs.path_hash_mode = cmd_frame[2];
|
|
savePrefs();
|
|
writeOKFrame();
|
|
}
|
|
} else if (cmd_frame[0] == CMD_REBOOT && memcmp(&cmd_frame[1], "reboot", 6) == 0) {
|
|
if (dirty_contacts_expiry) { // is there are pending dirty contacts write needed?
|
|
saveContacts();
|
|
}
|
|
board.reboot();
|
|
} else if (cmd_frame[0] == CMD_GET_BATT_AND_STORAGE) {
|
|
uint8_t reply[11];
|
|
int i = 0;
|
|
reply[i++] = RESP_CODE_BATT_AND_STORAGE;
|
|
uint16_t battery_millivolts = board.getBattMilliVolts();
|
|
uint32_t used = _store->getStorageUsedKb();
|
|
uint32_t total = _store->getStorageTotalKb();
|
|
memcpy(&reply[i], &battery_millivolts, 2); i += 2;
|
|
memcpy(&reply[i], &used, 4); i += 4;
|
|
memcpy(&reply[i], &total, 4); i += 4;
|
|
_serial->writeFrame(reply, i);
|
|
} else if (cmd_frame[0] == CMD_EXPORT_PRIVATE_KEY) {
|
|
#if ENABLE_PRIVATE_KEY_EXPORT
|
|
uint8_t reply[65];
|
|
reply[0] = RESP_CODE_PRIVATE_KEY;
|
|
self_id.writeTo(&reply[1], 64);
|
|
_serial->writeFrame(reply, 65);
|
|
#else
|
|
writeDisabledFrame();
|
|
#endif
|
|
} else if (cmd_frame[0] == CMD_IMPORT_PRIVATE_KEY && len >= 65) {
|
|
#if ENABLE_PRIVATE_KEY_IMPORT
|
|
if (!mesh::LocalIdentity::validatePrivateKey(&cmd_frame[1])) {
|
|
writeErrFrame(ERR_CODE_ILLEGAL_ARG); // invalid key
|
|
} else {
|
|
mesh::LocalIdentity identity;
|
|
identity.readFrom(&cmd_frame[1], 64);
|
|
if (_store->saveMainIdentity(identity)) {
|
|
self_id = identity;
|
|
writeOKFrame();
|
|
// re-load contacts, to invalidate ecdh shared_secrets
|
|
resetContacts();
|
|
_store->loadContacts(this);
|
|
} else {
|
|
writeErrFrame(ERR_CODE_FILE_IO_ERROR);
|
|
}
|
|
}
|
|
#else
|
|
writeDisabledFrame();
|
|
#endif
|
|
} else if (cmd_frame[0] == CMD_SEND_RAW_DATA && len >= 6) {
|
|
int i = 1;
|
|
int8_t path_len = cmd_frame[i++];
|
|
if (path_len >= 0 && i + path_len + 4 <= len) { // minimum 4 byte payload
|
|
uint8_t *path = &cmd_frame[i];
|
|
i += path_len;
|
|
auto pkt = createRawData(&cmd_frame[i], len - i);
|
|
if (pkt) {
|
|
sendDirect(pkt, path, path_len);
|
|
writeOKFrame();
|
|
} else {
|
|
writeErrFrame(ERR_CODE_TABLE_FULL);
|
|
}
|
|
} else {
|
|
writeErrFrame(ERR_CODE_UNSUPPORTED_CMD); // flood, not supported (yet)
|
|
}
|
|
} else if (cmd_frame[0] == CMD_SEND_LOGIN && len >= 1 + PUB_KEY_SIZE) {
|
|
uint8_t *pub_key = &cmd_frame[1];
|
|
ContactInfo *recipient = lookupContactByPubKey(pub_key, PUB_KEY_SIZE);
|
|
char *password = (char *)&cmd_frame[1 + PUB_KEY_SIZE];
|
|
cmd_frame[len] = 0; // ensure null terminator in password
|
|
if (recipient) {
|
|
uint32_t est_timeout;
|
|
int result = sendLogin(*recipient, password, est_timeout);
|
|
if (result == MSG_SEND_FAILED) {
|
|
writeErrFrame(ERR_CODE_TABLE_FULL);
|
|
} else {
|
|
clearPendingReqs();
|
|
memcpy(&pending_login, recipient->id.pub_key, 4); // match this to onContactResponse()
|
|
out_frame[0] = RESP_CODE_SENT;
|
|
out_frame[1] = (result == MSG_SEND_SENT_FLOOD) ? 1 : 0;
|
|
memcpy(&out_frame[2], &pending_login, 4);
|
|
memcpy(&out_frame[6], &est_timeout, 4);
|
|
_serial->writeFrame(out_frame, 10);
|
|
}
|
|
} else {
|
|
writeErrFrame(ERR_CODE_NOT_FOUND); // contact not found
|
|
}
|
|
} else if (cmd_frame[0] == CMD_SEND_ANON_REQ && len > 1 + PUB_KEY_SIZE) {
|
|
uint8_t *pub_key = &cmd_frame[1];
|
|
ContactInfo *recipient = lookupContactByPubKey(pub_key, PUB_KEY_SIZE);
|
|
uint8_t *data = &cmd_frame[1 + PUB_KEY_SIZE];
|
|
if (recipient) {
|
|
uint32_t tag, est_timeout;
|
|
int result = sendAnonReq(*recipient, data, len - (1 + PUB_KEY_SIZE), tag, est_timeout);
|
|
if (result == MSG_SEND_FAILED) {
|
|
writeErrFrame(ERR_CODE_TABLE_FULL);
|
|
} else {
|
|
clearPendingReqs();
|
|
pending_req = tag; // match this to onContactResponse()
|
|
out_frame[0] = RESP_CODE_SENT;
|
|
out_frame[1] = (result == MSG_SEND_SENT_FLOOD) ? 1 : 0;
|
|
memcpy(&out_frame[2], &tag, 4);
|
|
memcpy(&out_frame[6], &est_timeout, 4);
|
|
_serial->writeFrame(out_frame, 10);
|
|
}
|
|
} else {
|
|
writeErrFrame(ERR_CODE_NOT_FOUND); // contact not found
|
|
}
|
|
} else if (cmd_frame[0] == CMD_SEND_STATUS_REQ && len >= 1 + PUB_KEY_SIZE) {
|
|
uint8_t *pub_key = &cmd_frame[1];
|
|
ContactInfo *recipient = lookupContactByPubKey(pub_key, PUB_KEY_SIZE);
|
|
if (recipient) {
|
|
uint32_t tag, est_timeout;
|
|
int result = sendRequest(*recipient, REQ_TYPE_GET_STATUS, tag, est_timeout);
|
|
if (result == MSG_SEND_FAILED) {
|
|
writeErrFrame(ERR_CODE_TABLE_FULL);
|
|
} else {
|
|
clearPendingReqs();
|
|
// FUTURE: pending_status = tag; // match this in onContactResponse()
|
|
memcpy(&pending_status, recipient->id.pub_key, 4); // legacy matching scheme
|
|
out_frame[0] = RESP_CODE_SENT;
|
|
out_frame[1] = (result == MSG_SEND_SENT_FLOOD) ? 1 : 0;
|
|
memcpy(&out_frame[2], &tag, 4);
|
|
memcpy(&out_frame[6], &est_timeout, 4);
|
|
_serial->writeFrame(out_frame, 10);
|
|
}
|
|
} else {
|
|
writeErrFrame(ERR_CODE_NOT_FOUND); // contact not found
|
|
}
|
|
} else if (cmd_frame[0] == CMD_SEND_PATH_DISCOVERY_REQ && cmd_frame[1] == 0 && len >= 2 + PUB_KEY_SIZE) {
|
|
uint8_t *pub_key = &cmd_frame[2];
|
|
ContactInfo *recipient = lookupContactByPubKey(pub_key, PUB_KEY_SIZE);
|
|
if (recipient) {
|
|
uint32_t tag, est_timeout;
|
|
// 'Path Discovery' is just a special case of flood + Telemetry req
|
|
uint8_t req_data[9];
|
|
req_data[0] = REQ_TYPE_GET_TELEMETRY_DATA;
|
|
req_data[1] = ~(TELEM_PERM_BASE); // NEW: inverse permissions mask (ie. we only want BASE telemetry)
|
|
memset(&req_data[2], 0, 3); // reserved
|
|
getRNG()->random(&req_data[5], 4); // random blob to help make packet-hash unique
|
|
auto save = recipient->out_path_len; // temporarily force sendRequest() to flood
|
|
recipient->out_path_len = OUT_PATH_UNKNOWN;
|
|
int result = sendRequest(*recipient, req_data, sizeof(req_data), tag, est_timeout);
|
|
recipient->out_path_len = save;
|
|
if (result == MSG_SEND_FAILED) {
|
|
writeErrFrame(ERR_CODE_TABLE_FULL);
|
|
} else {
|
|
clearPendingReqs();
|
|
pending_discovery = tag; // match this in onContactResponse()
|
|
out_frame[0] = RESP_CODE_SENT;
|
|
out_frame[1] = (result == MSG_SEND_SENT_FLOOD) ? 1 : 0;
|
|
memcpy(&out_frame[2], &tag, 4);
|
|
memcpy(&out_frame[6], &est_timeout, 4);
|
|
_serial->writeFrame(out_frame, 10);
|
|
}
|
|
} else {
|
|
writeErrFrame(ERR_CODE_NOT_FOUND); // contact not found
|
|
}
|
|
} else if (cmd_frame[0] == CMD_SEND_TELEMETRY_REQ && len >= 4 + PUB_KEY_SIZE) { // can deprecate, in favour of CMD_SEND_BINARY_REQ
|
|
uint8_t *pub_key = &cmd_frame[4];
|
|
ContactInfo *recipient = lookupContactByPubKey(pub_key, PUB_KEY_SIZE);
|
|
if (recipient) {
|
|
uint32_t tag, est_timeout;
|
|
int result = sendRequest(*recipient, REQ_TYPE_GET_TELEMETRY_DATA, tag, est_timeout);
|
|
if (result == MSG_SEND_FAILED) {
|
|
writeErrFrame(ERR_CODE_TABLE_FULL);
|
|
} else {
|
|
clearPendingReqs();
|
|
pending_telemetry = tag; // match this in onContactResponse()
|
|
out_frame[0] = RESP_CODE_SENT;
|
|
out_frame[1] = (result == MSG_SEND_SENT_FLOOD) ? 1 : 0;
|
|
memcpy(&out_frame[2], &tag, 4);
|
|
memcpy(&out_frame[6], &est_timeout, 4);
|
|
_serial->writeFrame(out_frame, 10);
|
|
}
|
|
} else {
|
|
writeErrFrame(ERR_CODE_NOT_FOUND); // contact not found
|
|
}
|
|
} else if (cmd_frame[0] == CMD_SEND_TELEMETRY_REQ && len == 4) { // 'self' telemetry request
|
|
telemetry.reset();
|
|
telemetry.addVoltage(TELEM_CHANNEL_SELF, (float)board.getBattMilliVolts() / 1000.0f);
|
|
// query other sensors -- target specific
|
|
sensors.querySensors(0xFF, telemetry);
|
|
|
|
int i = 0;
|
|
out_frame[i++] = PUSH_CODE_TELEMETRY_RESPONSE;
|
|
out_frame[i++] = 0; // reserved
|
|
memcpy(&out_frame[i], self_id.pub_key, 6);
|
|
i += 6; // pub_key_prefix
|
|
uint8_t tlen = telemetry.getSize();
|
|
memcpy(&out_frame[i], telemetry.getBuffer(), tlen);
|
|
i += tlen;
|
|
_serial->writeFrame(out_frame, i);
|
|
} else if (cmd_frame[0] == CMD_SEND_BINARY_REQ && len >= 2 + PUB_KEY_SIZE) {
|
|
uint8_t *pub_key = &cmd_frame[1];
|
|
ContactInfo *recipient = lookupContactByPubKey(pub_key, PUB_KEY_SIZE);
|
|
if (recipient) {
|
|
uint8_t *req_data = &cmd_frame[1 + PUB_KEY_SIZE];
|
|
uint32_t tag, est_timeout;
|
|
int result = sendRequest(*recipient, req_data, len - (1 + PUB_KEY_SIZE), tag, est_timeout);
|
|
if (result == MSG_SEND_FAILED) {
|
|
writeErrFrame(ERR_CODE_TABLE_FULL);
|
|
} else {
|
|
clearPendingReqs();
|
|
pending_req = tag; // match this in onContactResponse()
|
|
out_frame[0] = RESP_CODE_SENT;
|
|
out_frame[1] = (result == MSG_SEND_SENT_FLOOD) ? 1 : 0;
|
|
memcpy(&out_frame[2], &tag, 4);
|
|
memcpy(&out_frame[6], &est_timeout, 4);
|
|
_serial->writeFrame(out_frame, 10);
|
|
}
|
|
} else {
|
|
writeErrFrame(ERR_CODE_NOT_FOUND); // contact not found
|
|
}
|
|
} else if (cmd_frame[0] == CMD_HAS_CONNECTION && len >= 1 + PUB_KEY_SIZE) {
|
|
uint8_t *pub_key = &cmd_frame[1];
|
|
if (hasConnectionTo(pub_key)) {
|
|
writeOKFrame();
|
|
} else {
|
|
writeErrFrame(ERR_CODE_NOT_FOUND);
|
|
}
|
|
} else if (cmd_frame[0] == CMD_LOGOUT && len >= 1 + PUB_KEY_SIZE) {
|
|
uint8_t *pub_key = &cmd_frame[1];
|
|
stopConnection(pub_key);
|
|
writeOKFrame();
|
|
} else if (cmd_frame[0] == CMD_GET_CHANNEL && len >= 2) {
|
|
uint8_t channel_idx = cmd_frame[1];
|
|
ChannelDetails channel;
|
|
if (getChannel(channel_idx, channel)) {
|
|
int i = 0;
|
|
out_frame[i++] = RESP_CODE_CHANNEL_INFO;
|
|
out_frame[i++] = channel_idx;
|
|
strcpy((char *)&out_frame[i], channel.name);
|
|
i += 32;
|
|
memcpy(&out_frame[i], channel.channel.secret, 16);
|
|
i += 16; // NOTE: only 128-bit supported
|
|
_serial->writeFrame(out_frame, i);
|
|
} else {
|
|
writeErrFrame(ERR_CODE_NOT_FOUND);
|
|
}
|
|
} else if (cmd_frame[0] == CMD_SET_CHANNEL && len >= 2 + 32 + 32) {
|
|
writeErrFrame(ERR_CODE_UNSUPPORTED_CMD); // not supported (yet)
|
|
} else if (cmd_frame[0] == CMD_SET_CHANNEL && len >= 2 + 32 + 16) {
|
|
uint8_t channel_idx = cmd_frame[1];
|
|
ChannelDetails channel;
|
|
StrHelper::strncpy(channel.name, (char *)&cmd_frame[2], 32);
|
|
memset(channel.channel.secret, 0, sizeof(channel.channel.secret));
|
|
memcpy(channel.channel.secret, &cmd_frame[2 + 32], 16); // NOTE: only 128-bit supported
|
|
if (setChannel(channel_idx, channel)) {
|
|
saveChannels();
|
|
writeOKFrame();
|
|
} else {
|
|
writeErrFrame(ERR_CODE_NOT_FOUND); // bad channel_idx
|
|
}
|
|
} else if (cmd_frame[0] == CMD_SIGN_START) {
|
|
out_frame[0] = RESP_CODE_SIGN_START;
|
|
out_frame[1] = 0; // reserved
|
|
uint32_t len = MAX_SIGN_DATA_LEN;
|
|
memcpy(&out_frame[2], &len, 4);
|
|
_serial->writeFrame(out_frame, 6);
|
|
|
|
if (sign_data) {
|
|
free(sign_data);
|
|
}
|
|
sign_data = (uint8_t *)malloc(MAX_SIGN_DATA_LEN);
|
|
sign_data_len = 0;
|
|
} else if (cmd_frame[0] == CMD_SIGN_DATA && len > 1) {
|
|
if (sign_data == NULL || sign_data_len + (len - 1) > MAX_SIGN_DATA_LEN) {
|
|
writeErrFrame(sign_data == NULL ? ERR_CODE_BAD_STATE : ERR_CODE_TABLE_FULL); // error: too long
|
|
} else {
|
|
memcpy(&sign_data[sign_data_len], &cmd_frame[1], len - 1);
|
|
sign_data_len += (len - 1);
|
|
writeOKFrame();
|
|
}
|
|
} else if (cmd_frame[0] == CMD_SIGN_FINISH) {
|
|
if (sign_data) {
|
|
self_id.sign(&out_frame[1], sign_data, sign_data_len);
|
|
|
|
free(sign_data); // don't need sign_data now
|
|
sign_data = NULL;
|
|
|
|
out_frame[0] = RESP_CODE_SIGNATURE;
|
|
_serial->writeFrame(out_frame, 1 + SIGNATURE_SIZE);
|
|
} else {
|
|
writeErrFrame(ERR_CODE_BAD_STATE);
|
|
}
|
|
} else if (cmd_frame[0] == CMD_SEND_TRACE_PATH && len > 10 && len - 10 < MAX_PACKET_PAYLOAD-5) {
|
|
uint8_t path_len = len - 10;
|
|
uint8_t flags = cmd_frame[9];
|
|
uint8_t path_sz = flags & 0x03; // NEW v1.11+
|
|
if ((path_len >> path_sz) > MAX_PATH_SIZE || (path_len % (1 << path_sz)) != 0) { // make sure is multiple of path_sz
|
|
writeErrFrame(ERR_CODE_ILLEGAL_ARG);
|
|
} else {
|
|
uint32_t tag, auth;
|
|
memcpy(&tag, &cmd_frame[1], 4);
|
|
memcpy(&auth, &cmd_frame[5], 4);
|
|
auto pkt = createTrace(tag, auth, flags);
|
|
if (pkt) {
|
|
sendDirect(pkt, &cmd_frame[10], path_len);
|
|
|
|
uint32_t t = _radio->getEstAirtimeFor(pkt->payload_len + pkt->path_len + 2);
|
|
uint32_t est_timeout = calcDirectTimeoutMillisFor(t, path_len >> path_sz);
|
|
|
|
out_frame[0] = RESP_CODE_SENT;
|
|
out_frame[1] = 0;
|
|
memcpy(&out_frame[2], &tag, 4);
|
|
memcpy(&out_frame[6], &est_timeout, 4);
|
|
_serial->writeFrame(out_frame, 10);
|
|
} else {
|
|
writeErrFrame(ERR_CODE_TABLE_FULL);
|
|
}
|
|
}
|
|
} else if (cmd_frame[0] == CMD_SET_DEVICE_PIN && len >= 5) {
|
|
|
|
// get pin from command frame
|
|
uint32_t pin;
|
|
memcpy(&pin, &cmd_frame[1], 4);
|
|
|
|
// ensure pin is zero, or a valid 6 digit pin
|
|
if (pin == 0 || (pin >= 100000 && pin <= 999999)) {
|
|
_prefs.ble_pin = pin;
|
|
savePrefs();
|
|
writeOKFrame();
|
|
} else {
|
|
writeErrFrame(ERR_CODE_ILLEGAL_ARG);
|
|
}
|
|
} else if (cmd_frame[0] == CMD_GET_CUSTOM_VARS) {
|
|
out_frame[0] = RESP_CODE_CUSTOM_VARS;
|
|
char *dp = (char *)&out_frame[1];
|
|
for (int i = 0; i < sensors.getNumSettings() && dp - (char *)&out_frame[1] < 140; i++) {
|
|
if (i > 0) {
|
|
*dp++ = ',';
|
|
}
|
|
strcpy(dp, sensors.getSettingName(i));
|
|
dp = strchr(dp, 0);
|
|
*dp++ = ':';
|
|
strcpy(dp, sensors.getSettingValue(i));
|
|
dp = strchr(dp, 0);
|
|
}
|
|
_serial->writeFrame(out_frame, dp - (char *)out_frame);
|
|
} else if (cmd_frame[0] == CMD_SET_CUSTOM_VAR && len >= 4) {
|
|
cmd_frame[len] = 0;
|
|
char *sp = (char *)&cmd_frame[1];
|
|
char *np = strchr(sp, ':'); // look for separator char
|
|
if (np) {
|
|
*np++ = 0; // modify 'cmd_frame', replace ':' with null
|
|
bool success = sensors.setSettingValue(sp, np);
|
|
if (success) {
|
|
#if ENV_INCLUDE_GPS == 1
|
|
// Update node preferences for GPS settings
|
|
if (strcmp(sp, "gps") == 0) {
|
|
_prefs.gps_enabled = (np[0] == '1') ? 1 : 0;
|
|
savePrefs();
|
|
} else if (strcmp(sp, "gps_interval") == 0) {
|
|
uint32_t interval_seconds = atoi(np);
|
|
_prefs.gps_interval = constrain(interval_seconds, 0, 86400);
|
|
savePrefs();
|
|
}
|
|
#endif
|
|
writeOKFrame();
|
|
} else {
|
|
writeErrFrame(ERR_CODE_ILLEGAL_ARG);
|
|
}
|
|
} else {
|
|
writeErrFrame(ERR_CODE_ILLEGAL_ARG);
|
|
}
|
|
} else if (cmd_frame[0] == CMD_GET_ADVERT_PATH && len >= PUB_KEY_SIZE+2) {
|
|
// FUTURE use: uint8_t reserved = cmd_frame[1];
|
|
uint8_t *pub_key = &cmd_frame[2];
|
|
AdvertPath* found = NULL;
|
|
for (int i = 0; i < ADVERT_PATH_TABLE_SIZE; i++) {
|
|
auto p = &advert_paths[i];
|
|
if (memcmp(p->pubkey_prefix, pub_key, sizeof(p->pubkey_prefix)) == 0) {
|
|
found = p;
|
|
break;
|
|
}
|
|
}
|
|
if (found) {
|
|
int i = 0;
|
|
out_frame[i++] = RESP_CODE_ADVERT_PATH;
|
|
memcpy(&out_frame[i], &found->recv_timestamp, 4); i += 4;
|
|
out_frame[i++] = found->path_len;
|
|
i += mesh::Packet::writePath(&out_frame[i], found->path, found->path_len);
|
|
_serial->writeFrame(out_frame, i);
|
|
} else {
|
|
writeErrFrame(ERR_CODE_NOT_FOUND);
|
|
}
|
|
} else if (cmd_frame[0] == CMD_GET_STATS && len >= 2) {
|
|
uint8_t stats_type = cmd_frame[1];
|
|
if (stats_type == STATS_TYPE_CORE) {
|
|
int i = 0;
|
|
out_frame[i++] = RESP_CODE_STATS;
|
|
out_frame[i++] = STATS_TYPE_CORE;
|
|
uint16_t battery_mv = board.getBattMilliVolts();
|
|
uint32_t uptime_secs = _ms->getMillis() / 1000;
|
|
uint8_t queue_len = (uint8_t)_mgr->getOutboundTotal();
|
|
memcpy(&out_frame[i], &battery_mv, 2); i += 2;
|
|
memcpy(&out_frame[i], &uptime_secs, 4); i += 4;
|
|
memcpy(&out_frame[i], &_err_flags, 2); i += 2;
|
|
out_frame[i++] = queue_len;
|
|
_serial->writeFrame(out_frame, i);
|
|
} else if (stats_type == STATS_TYPE_RADIO) {
|
|
int i = 0;
|
|
out_frame[i++] = RESP_CODE_STATS;
|
|
out_frame[i++] = STATS_TYPE_RADIO;
|
|
int16_t noise_floor = (int16_t)_radio->getNoiseFloor();
|
|
int8_t last_rssi = (int8_t)radio_driver.getLastRSSI();
|
|
int8_t last_snr = (int8_t)(radio_driver.getLastSNR() * 4); // scaled by 4 for 0.25 dB precision
|
|
uint32_t tx_air_secs = getTotalAirTime() / 1000;
|
|
uint32_t rx_air_secs = getReceiveAirTime() / 1000;
|
|
memcpy(&out_frame[i], &noise_floor, 2); i += 2;
|
|
out_frame[i++] = last_rssi;
|
|
out_frame[i++] = last_snr;
|
|
memcpy(&out_frame[i], &tx_air_secs, 4); i += 4;
|
|
memcpy(&out_frame[i], &rx_air_secs, 4); i += 4;
|
|
_serial->writeFrame(out_frame, i);
|
|
} else if (stats_type == STATS_TYPE_PACKETS) {
|
|
int i = 0;
|
|
out_frame[i++] = RESP_CODE_STATS;
|
|
out_frame[i++] = STATS_TYPE_PACKETS;
|
|
uint32_t recv = radio_driver.getPacketsRecv();
|
|
uint32_t sent = radio_driver.getPacketsSent();
|
|
uint32_t n_sent_flood = getNumSentFlood();
|
|
uint32_t n_sent_direct = getNumSentDirect();
|
|
uint32_t n_recv_flood = getNumRecvFlood();
|
|
uint32_t n_recv_direct = getNumRecvDirect();
|
|
uint32_t n_recv_errors = radio_driver.getPacketsRecvErrors();
|
|
memcpy(&out_frame[i], &recv, 4); i += 4;
|
|
memcpy(&out_frame[i], &sent, 4); i += 4;
|
|
memcpy(&out_frame[i], &n_sent_flood, 4); i += 4;
|
|
memcpy(&out_frame[i], &n_sent_direct, 4); i += 4;
|
|
memcpy(&out_frame[i], &n_recv_flood, 4); i += 4;
|
|
memcpy(&out_frame[i], &n_recv_direct, 4); i += 4;
|
|
memcpy(&out_frame[i], &n_recv_errors, 4); i += 4;
|
|
_serial->writeFrame(out_frame, i);
|
|
} else {
|
|
writeErrFrame(ERR_CODE_ILLEGAL_ARG); // invalid stats sub-type
|
|
}
|
|
} else if (cmd_frame[0] == CMD_FACTORY_RESET && memcmp(&cmd_frame[1], "reset", 5) == 0) {
|
|
if (_serial) {
|
|
MESH_DEBUG_PRINTLN("Factory reset: disabling serial interface to prevent reconnects (BLE/WiFi)");
|
|
_serial->disable(); // Phone app disconnects before we can send OK frame so it's safe here
|
|
}
|
|
bool success = _store->formatFileSystem();
|
|
if (success) {
|
|
writeOKFrame();
|
|
delay(1000);
|
|
board.reboot(); // doesn't return
|
|
} else {
|
|
writeErrFrame(ERR_CODE_FILE_IO_ERROR);
|
|
}
|
|
} else if (cmd_frame[0] == CMD_SET_FLOOD_SCOPE && len >= 2 && cmd_frame[1] == 0) {
|
|
if (len >= 2 + 16) {
|
|
memcpy(send_scope.key, &cmd_frame[2], sizeof(send_scope.key)); // set curr scope TransportKey
|
|
} else {
|
|
memset(send_scope.key, 0, sizeof(send_scope.key)); // set scope to null
|
|
}
|
|
writeOKFrame();
|
|
} else if (cmd_frame[0] == CMD_SEND_CONTROL_DATA && len >= 2 && (cmd_frame[1] & 0x80) != 0) {
|
|
auto resp = createControlData(&cmd_frame[1], len - 1);
|
|
if (resp) {
|
|
sendZeroHop(resp);
|
|
writeOKFrame();
|
|
} else {
|
|
writeErrFrame(ERR_CODE_TABLE_FULL);
|
|
}
|
|
} else if (cmd_frame[0] == CMD_SET_AUTOADD_CONFIG) {
|
|
_prefs.autoadd_config = cmd_frame[1];
|
|
if (len >= 3) {
|
|
_prefs.autoadd_max_hops = min(cmd_frame[2], (uint8_t)64);
|
|
}
|
|
savePrefs();
|
|
writeOKFrame();
|
|
} else if (cmd_frame[0] == CMD_GET_AUTOADD_CONFIG) {
|
|
int i = 0;
|
|
out_frame[i++] = RESP_CODE_AUTOADD_CONFIG;
|
|
out_frame[i++] = _prefs.autoadd_config;
|
|
out_frame[i++] = _prefs.autoadd_max_hops;
|
|
_serial->writeFrame(out_frame, i);
|
|
} else if (cmd_frame[0] == CMD_GET_ALLOWED_REPEAT_FREQ) {
|
|
int i = 0;
|
|
out_frame[i++] = RESP_ALLOWED_REPEAT_FREQ;
|
|
for (int k = 0; k < sizeof(repeat_freq_ranges)/sizeof(repeat_freq_ranges[0]) && i + 8 < sizeof(out_frame); k++) {
|
|
auto r = &repeat_freq_ranges[k];
|
|
memcpy(&out_frame[i], &r->lower_freq, 4); i += 4;
|
|
memcpy(&out_frame[i], &r->upper_freq, 4); i += 4;
|
|
}
|
|
_serial->writeFrame(out_frame, i);
|
|
} else {
|
|
writeErrFrame(ERR_CODE_UNSUPPORTED_CMD);
|
|
MESH_DEBUG_PRINTLN("ERROR: unknown command: %02X", cmd_frame[0]);
|
|
}
|
|
}
|
|
|
|
void MyMesh::enterCLIRescue() {
|
|
_cli_rescue = true;
|
|
cli_command[0] = 0;
|
|
Serial.println("========= CLI Rescue =========");
|
|
}
|
|
|
|
void MyMesh::checkCLIRescueCmd() {
|
|
int len = strlen(cli_command);
|
|
while (Serial.available() && len < sizeof(cli_command)-1) {
|
|
char c = Serial.read();
|
|
if (c != '\n') {
|
|
cli_command[len++] = c;
|
|
cli_command[len] = 0;
|
|
}
|
|
Serial.print(c); // echo
|
|
}
|
|
if (len == sizeof(cli_command)-1) { // command buffer full
|
|
cli_command[sizeof(cli_command)-1] = '\r';
|
|
}
|
|
|
|
if (len > 0 && cli_command[len - 1] == '\r') { // received complete line
|
|
cli_command[len - 1] = 0; // replace newline with C string null terminator
|
|
|
|
if (memcmp(cli_command, "set ", 4) == 0) {
|
|
const char* config = &cli_command[4];
|
|
if (memcmp(config, "pin ", 4) == 0) {
|
|
_prefs.ble_pin = atoi(&config[4]);
|
|
savePrefs();
|
|
Serial.printf(" > pin is now %06d\n", _prefs.ble_pin);
|
|
} else {
|
|
Serial.printf(" Error: unknown config: %s\n", config);
|
|
}
|
|
} else if (strcmp(cli_command, "rebuild") == 0) {
|
|
bool success = _store->formatFileSystem();
|
|
if (success) {
|
|
_store->saveMainIdentity(self_id);
|
|
savePrefs();
|
|
saveContacts();
|
|
saveChannels();
|
|
Serial.println(" > erase and rebuild done");
|
|
} else {
|
|
Serial.println(" Error: erase failed");
|
|
}
|
|
} else if (strcmp(cli_command, "erase") == 0) {
|
|
bool success = _store->formatFileSystem();
|
|
if (success) {
|
|
Serial.println(" > erase done");
|
|
} else {
|
|
Serial.println(" Error: erase failed");
|
|
}
|
|
} else if (memcmp(cli_command, "ls", 2) == 0) {
|
|
|
|
// get path from command e.g: "ls /adafruit"
|
|
const char *path = &cli_command[3];
|
|
|
|
bool is_fs2 = false;
|
|
if (memcmp(path, "UserData/", 9) == 0) {
|
|
path += 8; // skip "UserData"
|
|
} else if (memcmp(path, "ExtraFS/", 8) == 0) {
|
|
path += 7; // skip "ExtraFS"
|
|
is_fs2 = true;
|
|
}
|
|
Serial.printf("Listing files in %s\n", path);
|
|
|
|
// log each file and directory
|
|
File root = _store->openRead(path);
|
|
if (is_fs2 == false) {
|
|
if (root) {
|
|
File file = root.openNextFile();
|
|
while (file) {
|
|
if (file.isDirectory()) {
|
|
Serial.printf("[dir] UserData%s/%s\n", path, file.name());
|
|
} else {
|
|
Serial.printf("[file] UserData%s/%s (%d bytes)\n", path, file.name(), file.size());
|
|
}
|
|
// move to next file
|
|
file = root.openNextFile();
|
|
}
|
|
root.close();
|
|
}
|
|
}
|
|
|
|
if (is_fs2 == true || strlen(path) == 0 || strcmp(path, "/") == 0) {
|
|
if (_store->getSecondaryFS() != nullptr) {
|
|
File root2 = _store->openRead(_store->getSecondaryFS(), path);
|
|
File file = root2.openNextFile();
|
|
while (file) {
|
|
if (file.isDirectory()) {
|
|
Serial.printf("[dir] ExtraFS%s/%s\n", path, file.name());
|
|
} else {
|
|
Serial.printf("[file] ExtraFS%s/%s (%d bytes)\n", path, file.name(), file.size());
|
|
}
|
|
// move to next file
|
|
file = root2.openNextFile();
|
|
}
|
|
root2.close();
|
|
}
|
|
}
|
|
} else if (memcmp(cli_command, "cat", 3) == 0) {
|
|
|
|
// get path from command e.g: "cat /contacts3"
|
|
const char *path = &cli_command[4];
|
|
|
|
bool is_fs2 = false;
|
|
if (memcmp(path, "UserData/", 9) == 0) {
|
|
path += 8; // skip "UserData"
|
|
} else if (memcmp(path, "ExtraFS/", 8) == 0) {
|
|
path += 7; // skip "ExtraFS"
|
|
is_fs2 = true;
|
|
} else {
|
|
Serial.println("Invalid path provided, must start with UserData/ or ExtraFS/");
|
|
cli_command[0] = 0;
|
|
return;
|
|
}
|
|
|
|
// log file content as hex
|
|
File file = _store->openRead(path);
|
|
if (is_fs2 == true) {
|
|
file = _store->openRead(_store->getSecondaryFS(), path);
|
|
}
|
|
if(file){
|
|
|
|
// get file content
|
|
int file_size = file.available();
|
|
uint8_t buffer[file_size];
|
|
file.read(buffer, file_size);
|
|
|
|
// print hex
|
|
mesh::Utils::printHex(Serial, buffer, file_size);
|
|
Serial.print("\n");
|
|
|
|
file.close();
|
|
|
|
}
|
|
|
|
} else if (memcmp(cli_command, "rm ", 3) == 0) {
|
|
// get path from command e.g: "rm /adv_blobs"
|
|
const char *path = &cli_command[3];
|
|
MESH_DEBUG_PRINTLN("Removing file: %s", path);
|
|
// ensure path is not empty, or root dir
|
|
if(!path || strlen(path) == 0 || strcmp(path, "/") == 0){
|
|
Serial.println("Invalid path provided");
|
|
} else {
|
|
bool is_fs2 = false;
|
|
if (memcmp(path, "UserData/", 9) == 0) {
|
|
path += 8; // skip "UserData"
|
|
} else if (memcmp(path, "ExtraFS/", 8) == 0) {
|
|
path += 7; // skip "ExtraFS"
|
|
is_fs2 = true;
|
|
}
|
|
|
|
// remove file
|
|
bool removed;
|
|
if (is_fs2) {
|
|
MESH_DEBUG_PRINTLN("Removing file from ExtraFS: %s", path);
|
|
removed = _store->removeFile(_store->getSecondaryFS(), path);
|
|
} else {
|
|
MESH_DEBUG_PRINTLN("Removing file from UserData: %s", path);
|
|
removed = _store->removeFile(path);
|
|
}
|
|
if(removed){
|
|
Serial.println("File removed");
|
|
} else {
|
|
Serial.println("Failed to remove file");
|
|
}
|
|
|
|
}
|
|
|
|
} else if (strcmp(cli_command, "reboot") == 0) {
|
|
board.reboot(); // doesn't return
|
|
} else {
|
|
Serial.println(" Error: unknown command");
|
|
}
|
|
|
|
cli_command[0] = 0; // reset command buffer
|
|
}
|
|
}
|
|
|
|
void MyMesh::checkSerialInterface() {
|
|
size_t len = _serial->checkRecvFrame(cmd_frame);
|
|
if (len > 0) {
|
|
handleCmdFrame(len);
|
|
} else if (_iter_started // check if our ContactsIterator is 'running'
|
|
&& !_serial->isWriteBusy() // don't spam the Serial Interface too quickly!
|
|
) {
|
|
ContactInfo contact;
|
|
if (_iter.hasNext(this, contact)) {
|
|
if (contact.lastmod > _iter_filter_since) { // apply the 'since' filter
|
|
writeContactRespFrame(RESP_CODE_CONTACT, contact);
|
|
if (contact.lastmod > _most_recent_lastmod) {
|
|
_most_recent_lastmod = contact.lastmod; // save for the RESP_CODE_END_OF_CONTACTS frame
|
|
}
|
|
}
|
|
} else { // EOF
|
|
out_frame[0] = RESP_CODE_END_OF_CONTACTS;
|
|
memcpy(&out_frame[1], &_most_recent_lastmod,
|
|
4); // include the most recent lastmod, so app can update their 'since'
|
|
_serial->writeFrame(out_frame, 5);
|
|
_iter_started = false;
|
|
}
|
|
//} else if (!_serial->isWriteBusy()) {
|
|
// checkConnections(); // TODO - deprecate the 'Connections' stuff
|
|
}
|
|
}
|
|
|
|
void MyMesh::loop() {
|
|
BaseChatMesh::loop();
|
|
|
|
if (_cli_rescue) {
|
|
checkCLIRescueCmd();
|
|
} else {
|
|
checkSerialInterface();
|
|
}
|
|
|
|
// is there are pending dirty contacts write needed?
|
|
if (dirty_contacts_expiry && millisHasNowPassed(dirty_contacts_expiry)) {
|
|
saveContacts();
|
|
dirty_contacts_expiry = 0;
|
|
}
|
|
|
|
#ifdef DISPLAY_CLASS
|
|
if (_ui) _ui->setHasConnection(_serial->isConnected());
|
|
#endif
|
|
}
|
|
|
|
bool MyMesh::advert() {
|
|
mesh::Packet* pkt;
|
|
if (_prefs.advert_loc_policy == ADVERT_LOC_NONE) {
|
|
pkt = createSelfAdvert(_prefs.node_name);
|
|
} else {
|
|
pkt = createSelfAdvert(_prefs.node_name, sensors.node_lat, sensors.node_lon);
|
|
}
|
|
if (pkt) {
|
|
sendZeroHop(pkt);
|
|
return true;
|
|
} else {
|
|
return false;
|
|
}
|
|
}
|