Raja Subramanian and GitHub
d2bf8f0ba1
Support simulating subscriber bandwidth. ( #1609 )
...
* Support simualting subscriber bandwidth.
When non-zero, a full allocation is triggered.
Also, probes are stopped.
When set to zero, normal probing mechanism should catch up.
Adding `allowPause` override which can be a connection option.
* fix log
* allowPause in participant params
2023-04-13 13:59:24 +05:30
David Zhao and GitHub
f8a94c2125
Fixed timing-related failures with tests ( #1608 )
2023-04-12 21:01:57 -07:00
David Zhao and GitHub
4134965998
Integrate webhook retries ( #1607 )
2023-04-12 20:42:44 -07:00
Benjamin Pracht and GitHub
c2f76b79fa
Validate IngressInfo, update the info if an ingress is active ( #1605 )
2023-04-12 13:27:57 -10:00
Raja Subramanian and GitHub
69fb5e51a2
Fix stutter in forwarding path when using dependency descriptor ( #1600 )
...
* Decode chains
* clean up
* clean up
* decode targets only on publisher side
* comment out supported codecs
* fix test compile
* fix another test compile
* Adding TODO notes
* chainID -> chainIdx
* do not need to check for switch up point when using chains, as long as chain integrity is good, can switch
* more comments
* address comments
2023-04-12 17:30:54 +05:30
Jonas Schell and GitHub
29e26931e0
readme manager initial setup ( #1581 )
...
* readme manager initial setup
This PR makes the README ready to be managed by the readme manager. It adds custom comment tags to the readme, which are invisible when the README is rendered, but tell the readme manager where to insert and update content.
* Update README.md
* Update README.md
2023-04-12 09:14:16 +02:00
David Zhao and GitHub
6abe3b1aee
Adding logs when clients reconnect ( #1598 )
2023-04-10 21:26:16 -07:00
cnderrauber and GitHub
c70a5c831f
Refine transport fallback for client resuming ( #1597 )
...
* reset fallback after ice restart
* Configure ice for reconnect before send response
2023-04-10 15:12:05 +08:00
Raja Subramanian and GitHub
c56e37f3fe
Fix VP9 stutter in non-DD and some other misc changes ( #1595 )
...
* WIP commit
* WIP commit
* clean up
* remove todo
* fix test
2023-04-10 12:31:07 +05:30
Raja Subramanian and GitHub
6e5e3bdcf3
Update signal relay config doc ( #1596 )
2023-04-10 11:00:29 +05:30
Paul Wells and GitHub
eb095db70a
Batch signal retries ( #1593 )
...
* batch signal retries
* cleanup
* update protocol
* range check message dedup
* update protocol with codegen
* block while draining
* only log send timeouts
* cleanup
* cleanup
* cleanup
* typo
* update config yaml options
* update protocol
2023-04-09 18:18:21 -07:00
David Zhao and GitHub
a12f467e7a
chore: added omitempty to optional config entries ( #1594 )
2023-04-09 17:51:33 -07:00
Raja Subramanian and GitHub
48b2ea11c1
Forgot to transfer ddBytes ( #1592 )
2023-04-08 13:41:17 +05:30
Raja Subramanian and GitHub
4969b57c09
Chaging VideoLayers -> VideoLayer ( #1591 )
...
There was mixed used. It is a struct. So, it is a singular.
Change all the places I could find. There may be more, but can be
changed when spotted.
2023-04-08 12:39:02 +05:30
David Zhao and GitHub
e03f75d6a1
Implements source-specific permissions and client-driven metadata updates ( #1590 )
...
Closes #1565
2023-04-07 23:47:49 -07:00
Raja Subramanian and GitHub
e32eaa451f
Refactor video layer selector ( #1588 )
...
* WIP commit
* WIP commit
* fix test
* FPS for VP9
* WIP commit
* test changes
* WIP commit
* h264
* codec munger
* forwarder state
* clean up a bit
* dd interface
* WIP commit
* WIP commit
* WIP commit
* WIP commit
* more TODO notes
* overshoot interface
* clean up
* clean up isTemporalSupported
* wait for key frame to resume
* clean up VP8 payload descriptor stuff
* temporal layer selector
* comment out vp9 and av1
* space
* fix test compile
* append bytes
* fix tests
* fix test
2023-04-08 10:57:57 +05:30
David Zhao and GitHub
57b931e9bd
Fix return code when no panics have occurred ( #1589 )
...
Actually fix #1513
2023-04-07 19:54:30 -07:00
cnderrauber and GitHub
fb301e6e75
Add vp9 svc support by Dependency Descriptor ( #1586 )
...
* Add VP9 SVC support
* Fix preferred fps does not work
* Fix forwarder test
2023-04-06 21:51:33 +08:00
Paul Wells and GitHub
2b16589b79
Version 1.4.1 ( #1585 )
...
* Version 1.4.1
* fix change description
2023-04-05 21:43:25 -07:00
Paul Wells and GitHub
6b0cb33c53
set participant node for redis router in signal service ( #1584 )
2023-04-05 16:08:25 -07:00
Paul Wells and GitHub
234f7ea5cb
read batched signal messages ( #1583 )
...
* batch signal messages
* update protcol
2023-04-05 14:41:52 -07:00
Paul Wells and GitHub
5552062228
drain signal stream before closing ( #1582 )
...
* drain signal stream before closing
* update psrpc
* cleanup
2023-04-05 12:29:52 -07:00
Paul Wells and GitHub
6636e37664
add prometheus psrpc metrics observer ( #1571 )
...
* add prometheus psrpc metrics observer
* record rpc error counts
* update psrpc
* update protocol
2023-04-05 03:50:43 -07:00
Paul Wells and GitHub
5564bc531f
write signal messages from media without blocking ( #1580 )
2023-04-05 03:42:59 -07:00
David Zhao and GitHub
fc6a306031
Create a helper for retrieving a user's actual IP ( #1579 )
2023-04-04 19:32:49 -07:00
Raja Subramanian and GitHub
793e61ac14
Use bandwidth requested from last allocation. ( #1577 )
...
* Use bandwidth requested from last allocation.
With overshoot/opportunistic forwarding, It is possible that
bitrate at target layers is 0. So, use bandwidth requested
from last allocation which shouold have a correct value.
Still need to think about using the latest bit rates to get
the requested bandwidth. It is possible that bitrates have
changed since last allocation. That was the idea behind using
the latest bitrates, but it could return 0. Accounting for it
runs into a few scenarios. Last allocation has number from
last allocation and is a good indicator of the need.
* race
2023-04-04 09:58:57 +05:30
cnderrauber and GitHub
8cfba1308b
Add test case for munged sdp ( #1574 )
...
* Add test case for munged sdp
* clean code
2023-04-04 09:28:47 +08:00
David Zhao and GitHub
1cb6cc3ed7
Do not sample per participant to reduce memory usage ( #1576 )
2023-04-03 15:24:53 -07:00
31427f7594
Update module github.com/redis/go-redis/v9 to v9.0.3 ( #1572 )
...
Generated by renovateBot
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
2023-04-02 13:43:05 -07:00
Paul Wells and GitHub
1b09fc9721
fix panic in rtpstats ( #1570 )
2023-04-01 12:39:13 -07:00
David Zhao and GitHub
602f987ed7
Switch up ordering DTLS elliptic curves to reduce likelihood of filtering ( #1568 )
...
tl;dr. Pion-based traffic is impacted because TOR Snowflake uses Pion
https://github.com/pion/dtls/pull/474
2023-03-31 22:47:23 -07:00
David Zhao and GitHub
8be2b88ff6
Config docs for signal relay ( #1566 )
2023-03-31 18:28:15 -07:00
Paul Wells and GitHub
c45e23be3f
store participant res sink in interface typed field ( #1567 )
2023-03-31 00:45:50 -07:00
David Zhao and GitHub
b5b896a6c6
Version 1.4.0 ( #1564 )
2023-03-30 23:16:36 -07:00
David Zhao and GitHub
82fd3e865e
Fix deadlock caused by subscription manager test ( #1563 )
...
We held the lock if subscription length check fails
2023-03-30 17:10:32 -07:00
Raja Subramanian and GitHub
59961c1992
Aggregate method for RTPDeltaInfo ( #1562 )
2023-03-30 13:34:52 +05:30
e67d9ca201
Update pion deps ( #1557 )
...
Generated by renovateBot
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
2023-03-29 22:04:45 -07:00
Paul Wells and GitHub
aaab3b8ce8
fix signal client message buffer size ( #1561 )
...
* fix signal client message buffer size
* update psrpc dep
2023-03-29 16:34:45 -07:00
Raja Subramanian and GitHub
de80f521de
Increase sequence number cache to handle higb rate tracks. ( #1560 )
...
Hopefully temporary while we can find a better solution.
Adds 36 KB per SSRC. So, if a node can handle 10K SSRCs (roughly 10K
tracks), that will be 360 MB of extra memory.
2023-03-29 22:32:39 +05:30
Raja Subramanian and GitHub
2c439b3063
Fix sequence number offset on packet drop ( #1556 )
2023-03-29 07:43:28 +05:30
Raja Subramanian and GitHub
de86ccb3df
Calculate stats duration. ( #1554 )
2023-03-28 07:18:31 +05:30
David Colburn and GitHub
108b251045
egress updated webhook ( #1555 )
2023-03-27 16:34:44 -07:00
96607a170a
Update module github.com/urfave/cli/v2 to v2.25.1 ( #1553 )
...
Generated by renovateBot
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
2023-03-26 17:18:47 -07:00
Raja Subramanian and GitHub
f63962c2cc
Pure code movement ( #1552 )
2023-03-26 23:13:17 +05:30
Raja Subramanian and GitHub
afdae26972
Log timestamp jumps greater than 0.5 seconds. ( #1551 )
...
Would be good to check if this happens and if it correlates to any A/V
sync reports.
2023-03-26 12:52:50 +05:30
2fce780ce8
Update go deps ( #1402 )
...
* Update go deps
Generated by renovateBot
* use generics with Deque
---------
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Co-authored-by: David Zhao <dz@livekit.io >
2023-03-25 23:17:04 -07:00
David Zhao and GitHub
576eb7abbd
Update urfave/cli to fix 1 return value with livekit-server --help ( #1549 )
...
Fixes #1513
2023-03-25 23:02:08 -07:00
David Zhao and GitHub
d269b8c935
Update README with heading and demo changes ( #1541 )
2023-03-24 11:16:36 -07:00
davidliu and GitHub
f05a3a047a
add handling for react native and rust sdk client infos ( #1544 )
2023-03-25 01:27:37 +09:00
David Zhao and GitHub
d8356e012e
Give proper grace period when recorder is still in the room ( #1547 )
...
When a recorder is in the room, we would skip grace period due
to a bug with how LastLeftAt was set. This would cause RoomComposite
templates to exit immediately if the last participant in the room reconnects.
2023-03-23 23:57:11 -07:00
