## Problem
The node analytics activity timeline only shows the hours that hold
packets. `GetNodeAnalytics` sends sparse hourly buckets
(`cmd/server/store.go:10328`) and `buildActivityChart` used them as
category labels, so a silent stretch takes no room on the axis. An 11 h
outage of one repeater collapsed into two neighbouring bars, and two
repeaters that went down 12 h apart looked as if they dropped at the
same moment.
## Change
- `public/node-analytics.js`: `fillTimeline(tl, timeRange)` places every
hour from the start of the covered window (`timeRange.dataFrom` when
partial, else `timeRange.from`) to `timeRange.to` on the axis. Silent
hours get `{count: 0, certain: 0}`, so the certain/uncertain split from
#2260 stacks them as empty. Buckets the server sent are kept as they
are, also one outside the window. A missing or malformed `timeRange`
leaves the timeline unchanged.
- Above 8 days of covered window the hours are summed per UTC day (count
and certain), and the bar is labelled with its date plus "UTC". 337
hourly bars (14 days in memory) are about 1.5 px wide on a 700 px
canvas, so a quiet node would look empty. 7d stays hourly (169 bars).
- Buckets from older ingestors (`"2006-01-02 15:04:05"`, space instead
of T) are normalised so they land on their own hour.
- Exported as `NodeAnalyticsTimeline.fill` next to `series`.
Server stats are not touched: availability counts the hours with certain
packets (`store.go:10540`) and the longest silence is the gap between
them (`store.go:10549`), both correct on the sparse list. Sending zero
buckets from the server would break both.
## Scale
One bar per hour up to 8 days covered (25 for 24h, 169 for 7d), one per
day above it (31 for 30d, 366 for a full year). The fill is one pass
over the hours of the window: 8761 iterations for 365 days.
## Tests
- New `tests/unit/test-node-analytics-timeline-gaps.js` (13 cases, real
`node-analytics.js` in a vm), listed in `test-all.sh`: gaps filled with
zeros, window edges rounded to the hour, partial window starts at
`dataFrom`, empty node gives a full row of zeros, filled buckets go
through `series` as 0/0, bad `timeRange` returns the input,
out-of-window bucket kept, end on the hour included, 7d stays hourly, >8
days sums per day, 365 days gives 366 buckets, legacy space-format
bucket lands on its hour.
- Every suite in `test-all.sh` run one by one: all pass except
`test-manage-workflow.js` and `test-preflight-xss-gate.js`, which fail
the same way on this checkout without the change (Windows line endings /
console encoding).
## Browser check
Local server on the e2e fixture with one transmission moved 6 h back:
the 24h chart shows 10 hourly bars, five of them empty between the lone
early packet and the recent ones. Before the change the same data drew 4
adjacent bars. With the same transmission moved 10 days back, 30d shows
11 day bars labelled `2026-11-09 UTC` to `2026-11-19 UTC`, the lone
early packet visible at the left.
Not done: no E2E test added, no check on a mobile viewport.
CoreScope
High-performance mesh network analyzer powered by Go. Sub-millisecond packet queries, ~300 MB memory for 56K+ packets, real-time WebSocket broadcast, full channel decryption.
Self-hosted, open-source MeshCore packet analyzer. Collects MeshCore packets via MQTT, decodes them in real time, and presents a full web UI with live packet feed, interactive maps, channel chat, packet tracing, and per-node analytics.
⚡ Performance
The Go backend serves its packet and analytics API from an in-memory packet store with 7 indexes (hash, txID, obsID, observer, node, path hop, payload type). SQLite is for persistence only — reads never touch disk.
| Metric | Value |
|---|---|
| Packet queries | < 1 ms (in-memory) |
| All API endpoints | < 100 ms |
| Memory (56K packets) | ~300 MB (vs 1.3 GB on Node.js) |
| WebSocket broadcast | Real-time to all connected browsers |
| Channel decryption | AES-128-ECB with rainbow table |
| GOMEMLIMIT (memory-constrained hosts) | set to ≥1.5× working set (e.g. 1536 MiB on a 2 GB Pi for a ~1 GB store). Lower values trigger a GC death-spiral. Configure via the GOMEMLIMIT env var or runtime.maxMemoryMB in config.json; env wins. Applies to both server and ingestor. See #1010. |
See PERFORMANCE.md for full benchmarks.
✨ Features
📡 Live Trace Map
Real-time animated map with packet route visualization, VCR-style playback controls, and a retro LCD clock. Replay the last 24 hours of mesh activity, scrub through the timeline, or watch packets flow live at up to 8× speed.
📦 Packet Feed
Filterable real-time packet stream with byte-level breakdown, Excel-like resizable columns, and a detail pane. Toggle "My Nodes" to focus on your mesh.
🗺️ Network Overview
At-a-glance mesh stats — node counts, packet volume, observer coverage.
📊 Node Analytics
Per-node deep dive with interactive charts: activity timeline, packet type breakdown, SNR distribution, hop count analysis, peer network graph, and hourly heatmap.
💬 Channel Chat
Decoded group messages with sender names, @mentions, timestamps — like reading a Discord channel for your mesh.
📱 Mobile Ready
Full experience on your phone — proper touch controls, iOS safe area support, and a compact VCR bar.
And More
- 17 Analytics Tabs — RF, topology, channels, hash stats, distance, route patterns, scopes, and more
- Node Directory — searchable list with role tabs, detail panel, QR codes, advert timeline
- Packet Tracing — follow individual packets across observers with SNR/RSSI timeline
- Observer Status — health monitoring, packet counts, uptime, per-observer analytics
- Hash Collision Matrix — detect address collisions across the mesh
- Scope Audit: per repeater, which declared regions show no forwarding and which scopes it forwards without declaring them
- Channel Key Auto-Derivation — hashtag channels (
#channel) keys derived via SHA256 - Multi-Broker MQTT — connect to multiple brokers with per-source IATA filtering
- Dark / Light Mode — auto-detects system preference, map tiles swap too
- Theme Customizer — design your theme in-browser, export as
theme.json - Global Search — search packets, nodes, and channels (Ctrl+K)
- Shareable URLs — deep links to packets, channels, and observer detail pages
- Protobuf API Contract — typed API definitions in
proto/ - Accessible — ARIA patterns, keyboard navigation, screen reader support
Optional Features
Off by default, enabled in config.json:
- User Accounts: registration with email activation, settings sync, an admin area, hashtag channel proposals, mail notifications for watched nodes, and a personal data export. The dashboard stays public. See docs/user-guide/accounts.md
- Mobile RX Coverage: crowdsourced coverage from phones connected to a companion radio, drawn as hex bins on the RX Coverage page and on each node's Reach page. See docs/client-rx-coverage.md
Quick Start
Pre-built Image (Recommended)
No build step required — just run:
docker run -d --name corescope \
--restart=unless-stopped \
-p 80:80 -p 1883:1883 \
-v /your/data:/app/data \
ghcr.io/kpa-clawbot/corescope:latest
Open http://localhost — done. No config file needed; CoreScope starts with sensible defaults.
For HTTPS with a custom domain, add -p 443:443 and mount your Caddyfile:
docker run -d --name corescope \
--restart=unless-stopped \
-p 80:80 -p 443:443 -p 1883:1883 \
-v /your/data:/app/data \
-v /your/Caddyfile:/etc/caddy/Caddyfile:ro \
-v /your/caddy-data:/data/caddy \
ghcr.io/kpa-clawbot/corescope:latest
Disable built-in services with -e DISABLE_MOSQUITTO=true or -e DISABLE_CADDY=true, or drop a .env file in your data volume. See docs/deployment.md for the full reference.
Build from Source
git clone https://github.com/Kpa-clawbot/CoreScope.git
cd CoreScope
./manage.sh setup
The setup wizard walks you through config, domain, HTTPS, build, and run.
./manage.sh status # Health check + packet/node counts
./manage.sh logs # Follow logs
./manage.sh backup # Backup database
./manage.sh update # Pull latest + rebuild + restart
./manage.sh mqtt-test # Check if observer data is flowing
./manage.sh help # All commands
Configure
Copy config.example.json to config.json and edit:
{
"port": 3000,
"mqtt": {
"broker": "mqtt://localhost:1883",
"topic": "meshcore/+/+/packets"
},
"mqttSources": [
{
"name": "remote-feed",
"broker": "mqtts://remote-broker:8883",
"topics": ["meshcore/+/+/packets"],
"username": "user",
"password": "pass",
"iataFilter": ["SJC", "SFO", "OAK"]
}
],
"channelKeys": {
"public": "8b3387e9c5cdea6ac9e5edbaa115cd72"
},
"defaultRegion": "SJC"
}
| Field | Description |
|---|---|
port |
HTTP server port (default: 3000) |
mqtt.broker |
Local MQTT broker URL ("" to disable) |
mqttSources |
External MQTT broker connections (optional) |
channelKeys |
Channel decryption keys (hex). Hashtag channels auto-derived via SHA256 |
defaultRegion |
Default IATA region code for the UI |
dbPath |
SQLite database path (default: data/meshcore.db) |
Environment Variables
| Variable | Description |
|---|---|
DB_PATH |
Override SQLite database path |
GOMEMLIMIT |
Go soft memory limit, wins over runtime.maxMemoryMB |
The HTTP port is set with port in config.json or the server's -port flag.
Architecture
┌─────────────────────────────────────────────┐
│ Docker Container │
│ │
Observer → USB → │ Mosquitto ──→ Go Ingestor ──→ SQLite DB │
meshcoretomqtt → MQTT ──→│ │ │
│ Go HTTP Server ──→ WebSocket │
│ │ │ │
│ Caddy (HTTPS) ←───────┘ │
└────────────────────┼────────────────────────┘
│
Browser
Two-process model: The Go ingestor handles MQTT ingestion and packet decoding. The Go HTTP server loads all packets into an in-memory store on startup (5 indexes for fast lookups) and serves the REST API + WebSocket broadcast. Both are managed by supervisord inside a single container with Caddy for HTTPS and Mosquitto for local MQTT.
MQTT Setup
- Flash an observer node with
MESH_PACKET_LOGGING=1build flag - Connect via USB to a host running meshcoretomqtt
- Configure meshcoretomqtt with your IATA region code and MQTT broker address
- Packets appear on topic
meshcore/{IATA}/{PUBKEY}/packets
To decode a single raw hex packet without storing it, use POST /api/decode.
Project Structure
corescope/
├── cmd/
│ ├── server/ # Go HTTP server + WebSocket + REST API
│ │ ├── main.go # Entry point
│ │ ├── routes.go # 40+ API endpoint handlers
│ │ ├── store.go # In-memory packet store (5 indexes)
│ │ ├── db.go # SQLite persistence layer
│ │ ├── decoder.go # MeshCore packet decoder
│ │ ├── websocket.go # WebSocket broadcast
│ │ └── *_test.go # Server tests
│ └── ingestor/ # Go MQTT ingestor
│ ├── main.go # MQTT subscription + packet processing
│ ├── decoder.go # Packet decoder (shared logic)
│ ├── db.go # SQLite write path
│ └── *_test.go # Ingestor tests
├── proto/ # Protobuf API definitions
├── public/ # Vanilla JS frontend (no build step)
│ ├── index.html # SPA shell
│ ├── app.js # Router, WebSocket, utilities
│ ├── packets.js # Packet feed + hex breakdown
│ ├── map.js # Leaflet map + route visualization
│ ├── live.js # Live trace + VCR playback
│ ├── channels.js # Channel chat
│ ├── nodes.js # Node directory + detail views
│ ├── analytics.js # Analytics dashboard
│ └── style.css # CSS variable theming (light/dark)
├── docker/
│ ├── supervisord-go.conf # Process manager (server + ingestor)
│ ├── mosquitto.conf # MQTT broker config
│ ├── Caddyfile # Reverse proxy + HTTPS
│ └── entrypoint-go.sh # Container entrypoint
├── Dockerfile # Multi-stage Go build + Alpine runtime
├── config.example.json # Example configuration
├── tests/ # Node.js test suite: unit/ (test-all.sh) and e2e/ (Playwright)
├── test-all.sh # Runs every suite in tests/unit
└── tools/ # Generators, E2E tests, utilities
For Developers
Building
make build # all four binaries for your machine, into dist/
make build-server # just one
make crossbuild # static linux/amd64 + linux/arm64 binaries
The SQLite driver is mattn/go-sqlite3, which
is cgo, so a plain GOOS=linux go build from a Mac will not work: cross-compiling
needs a C compiler that can target the other platform. make crossbuild uses
zig as that compiler (install it and it just
works) and links statically against musl, so the result is one self-contained file
that runs on Alpine or scratch. The container build does the same thing — see
Dockerfile.
Test Suite
Go tests cover the backend, Node.js unit tests in tests/unit/ cover the frontend logic, and Playwright tests in tests/e2e/ validate the UI in a browser.
# Go backend tests
cd cmd/server && go test ./... -v
cd cmd/ingestor && go test ./... -v
# Or across all 16 modules at once
make test
# Node.js frontend + integration tests
npm test
# Playwright E2E (requires running server on localhost:3000)
node tests/e2e/test-e2e-playwright.js
Generate Test Data
node tools/generate-packets.js --api --count 200
Migrating from Node.js
If you're running an existing Node.js deployment, see docs/go-migration.md for a step-by-step guide. The Go engine reads the same SQLite database and config.json — no data migration needed.
Contributing
Contributions welcome. Please read AGENTS.md for coding conventions, testing requirements, and engineering principles before submitting a PR.
Live instance: analyzer.on8ar.eu: all read endpoints are public, no auth required.
API Documentation: CoreScope auto-generates an OpenAPI 3.0 spec. Browse the interactive Swagger UI at /api/docs or fetch the machine-readable spec at /api/spec.
License
GPL-3.0-or-later




