Files
iceman1001andClaude Opus 5.5 c7923105e5 PM5: fuel gauge 0 % at the 3300 mV shutdown floor
The firmware powers off at 3300 mV (BWM_SHUTDOWN_MV) but the gauge
Terminate Voltage was its 3200 mV default, so the PM5 switched off while
`hw status` still showed a few percent. The gauge setup (setcap and the
boot check) now writes Terminate Voltage 3300 mV with the capacity and
chem ID, and `hw dbg -3` shows it on the Gauge line.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-15 04:54:48 +07:00
..
2026-11-11 10:15:07 -06:00
2025-09-02 16:16:29 +02:00