Link proof signature, TCP proof routing, and split-packet handling
were causing intermittent message failures with Python LXMF clients.
Route >254B messages through link delivery, add proof retry for LoRa.
Backend:
- LoRaInterface captures packet RSSI/SNR immediately after every RX,
removing redundant SPI re-reads from log statements
- AnnounceManager populates DiscoveredNode.rssi/snr from LoRaInterface
on every announce (fields existed but were never wired up)
Frontend:
- Nodes screen shows RSSI appended to hops/age when dev mode is on
- Node name label uses smaller font (montserrat_12) to reduce truncation
- Normal users see no change
LoRaInterface: Implement RNode-compatible split-packet framing so the
full Reticulum MTU (500 bytes) works over LoRa. Packets >254 bytes are
transparently split into two LoRa frames with matching sequence numbers
and reassembled on the receiver. Also adds a 4-deep TX queue instead of
dropping packets when the radio is busy — critical for link handshakes.
LXMFManager: Large messages (>MDU) now queue pending link establishment
and retry via resource transfer instead of failing immediately. Stale
link-pending state is detected and reset. Speculative background link
establishment removed to avoid LoRa collisions.
AnnounceManager: Add app_data hex diagnostics on announce RX for
debugging name extraction issues.
main.cpp: Centralize all announce paths through announceWithName() so
display name and app_data are always logged.
The previous LORA_SAFE_LINK_PAYLOAD check only guarded link delivery,
but opportunistic delivery also exceeds the 255-byte LoRa MTU for longer
messages. Truncated packets corrupt the HMAC/ciphertext, wasting airtime
and confusing receivers.
Fix: LoRaInterface::send_outgoing() now rejects packets exceeding
MAX_PACKET_SIZE before they reach the radio. This is a hard limit —
messages too large for a single LoRa packet will not be sent until
Resource-based multi-packet transfer is implemented.
- Migrate all screens to LVGL v8.4 widget system
- Non-blocking radio TX (async endPacket via LoRaInterface)
- Live TCP server switching with transient node cleanup
- Fix UI freeze during radio transmit
- Trackball long-press delete, deferred click with debounce
- Pin microReticulum to 392363c, fix list_directory API
- Fix CI build: portable include path, remove hardcoded local path
- Rewrite MessageView with word-wrapped chat bubbles, timestamps,
incoming/outgoing alignment, pixel-based scrolling
- Add IdentityManager for multi-identity support (create/switch/delete,
8 slots max, per-identity display names)
- Fix transport mode: default to endpoint (no rebroadcast) — was acting
as transport node, rebroadcasting every TCP announce over LoRa causing
5-11 second UI freezes per TX. Loop time: 11146ms → 6ms
- Add Transport Node toggle in Settings > Network
- TCP interface now drains up to 10 frames per loop (was 1)
- Reduce LoRa debug polling from 5s to 30s
DeFiDude