Adds an lxma://<hash>:<pubkey> QR overlay reachable from Settings and
from a new header row at the top of the Contacts tab. Including the
public key lets Columba/Sideband skip the PENDING_IDENTITY round-trip.
Contacts list stays visible even with no saved contacts so the header
row is always reachable; the empty-state floats above it.
Both the LXMF Addr and Identity readonly entries truncated to the
first 16 hex chars, which made it impossible to type or read the
real address into another client (Sideband, Columba, etc) for adding
ratdeck as a contact. Drop the substring(0, 16) calls and show the
full 32-char hex. Wraps inside the row at the existing font; legible
and copyable.
CORE_DEBUG_LEVEL=0 drops Arduino core noise on expected-missing files, LittleFSFileSystem::open_file now actually works so path_table persists across reboots.
Regenerated Montserrat 10/12/14 with Cyrillic and Latin Extended
Unicode ranges so messages in Russian, Ukrainian, Bulgarian, and
accented European languages render properly instead of rectangles.
Timestamps: Incoming messages with invalid sender timestamps
(< Nov 2023 epoch) are now stamped with the receiver's local time
if available. Previously, messages from devices without NTP/GPS
showed no timestamp at all.
Frequency editor: Replace raw 9-digit Hz accumulator with a
radio-style digit cursor. Display shows NNN.NNN.NNN format with
bracket cursor on active digit (e.g., "920.[6]50.500"). Trackball
left/right moves cursor, digit keys replace at cursor and advance.
Esc restores original value. Matches amateur radio transceiver UX.
Previously, "Reboot Required!" fired on every applyAndSave() once
any WiFi setting changed — showing 3 times during a single STA
setup (mode + SSID + password). Now the toast only shows on first
detection with a gentler message: "WiFi changes apply on reboot".
Subsequent saves show "Saved" normally.
Screen idle:
- Remove powerMgr.activity() from radio yield callback — screen no
longer wakes on LoRa RX, auto-announce, or RSSI polls
- Add [POWER] state transition logging for on-device diagnostics
Radio regions:
- Add 4-region system: Americas (915), Europe (868), Australia (915),
Asia (923) with timezone-to-region mapping
- Region picker in Radio settings (always visible)
- Presets now apply region-appropriate frequency + modulation params
- Timezone change warns if it suggests a different radio region
Frequency input (developer mode):
- Hz-precision input (9 digits) displayed as MHz with trimmed decimals
- Left/right arrows step by 125 kHz, digit keys for direct entry
- Inspired by @strijar in https://github.com/ratspeak/ratdeck/pull/12
- GPS time sync via UBlox MIA-M10Q (38400 baud auto-detect)
- Custom zero-dependency NMEA parser with XOR checksum validation
- Only trust GPS time when satellites > 0 (no stale RTC cache)
- DST-aware timezone picker at first boot (21 cities, POSIX TZ strings)
- Timezone also configurable in Settings > GPS/Time
- GPS Time on by default, GPS Location off by default (opt-in)
- Status bar: clock (top-left), Ratspeak.org (center), battery (right)
- 12h time default (no AM/PM), configurable 24h in settings
- NVS persistence of GPS time for approximate timestamps across reboots
- Fix factory reset Enter key bleed-through (600ms input guard)
- Fix hardcoded UTC-5 NTP timezone (now uses DST-aware POSIX TZ)
- Enable UBlox MIA-M10Q GPS on T-Deck Plus (HAS_GPS true)
- Custom zero-dependency NMEA parser (NMEAParser.h) with XOR checksum
- GPSManager: baud auto-detect (115200/38400/9600, 10s timeout),
settimeofday() sync every 60s, NVS time/position persistence
- GPS Time enabled by default, GPS Location disabled by default
(user must explicitly opt in via Settings)
- Replace status bar connectivity bars with clock display (top-left)
- Default 12h format without AM/PM, configurable 24h in Settings
- Add GPS/Time settings category: GPS Time, GPS Location,
UTC Offset (-12 to +14), 24h Time toggle
- Fix hardcoded UTC-5 NTP timezone to use configurable utcOffset
- Change status bar brand text to "Ratspeak.org"
PlatformIO Build / release (push) Has been skipped
Apply bin8 fix to the duplicate announce encoding in LvSettingsScreen
(Send Announce action). Replace inline copy with shared function from
main.cpp. Follows up on PR #5.
- Fix TCP port input: allow direct digit entry instead of scroll-only
- Fix flash status always showing "Error" (was checking SD path on flash)
- Flash now shows used/total KB instead of just Mounted/Error
- Audio buffers use PSRAM (ps_malloc) with internal heap fallback
- Bump version to 1.6.1
These standalone devices should not act as transport nodes.
Remove the config toggle, settings UI, and boot-time config peek.
Hardcode transport_enabled(false).
- Update clone URLs in BUILDING.md and QUICKSTART.md to ratspeak/ratdeck
- Fix update checker API URL in LvSettingsScreen.cpp to ratspeak/ratdeck
- Bump version examples in BUILDING.md from v1.4.2 to v1.5.2
- Fix LXMF wire format: standardize on opportunistic [src:16][sig:64][content]
- Fix LXMF signature: sign(dest||src||packed) per spec, remove message_hash
- Fix MsgPack interop: handle both str and bin types for title/content
- Radio defaults changed to Balanced preset (SF9/BW250k/CR5/TX14)
- Messages screen: sorted by most recent, preview with You:/Them:, green unread dot, timestamps
- Status bar: replace LoRa/BLE/WiFi text with signal bars (green=connected, red=offline)
- Home screen: remove Unread info (shown in Messages tab)
- Contacts screen added (Friends tab)
- Identity manager: multi-slot identity support with per-slot display names
- Message store: fix peer hash truncation, SD directory creation, .bak file leak
- Settings: check for updates, active identity display, info diagnostics
- Migrate all screens to LVGL v8.4 widget system
- Non-blocking radio TX (async endPacket via LoRaInterface)
- Live TCP server switching with transient node cleanup
- Fix UI freeze during radio transmit
- Trackball long-press delete, deferred click with debounce
- Pin microReticulum to 392363c, fix list_directory API
- Fix CI build: portable include path, remove hardcoded local path
DeFiDude