dandri/seader
1
0
Fork 0
mirror of https://github.com/bettse/seader.git synced 2026-06-07 19:42:25 +00:00
Code Issues Packages Projects Releases Wiki Activity

Reorder init so uart comes after gpio

Browse Source
This commit is contained in:
Eric Betts
2025-11-04 21:04:38 -08:00
parent c99282b1c6
commit b3a42a079b
1 changed files with 5 additions and 6 deletions
Download Patch File Download Diff File Expand all files Collapse all files
uart.c
+5 -6
View File
@@ -53,6 +53,11 @@ void seader_uart_serial_init(Seader* seader, uint8_t uart_ch) {
furi_hal_serial_dma_rx_start(
seader_uart->serial_handle, seader_uart_on_irq_rx_dma_cb, seader_uart, false);
} else {
furi_hal_gpio_init(RESET_PIN, GpioModeOutputPushPull, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_write(RESET_PIN, true); // Active low, so set high
furi_hal_pwm_start(FuriHalPwmOutputIdLptim2PA4, PWM_FREQ, 50);
furi_hal_serial_init(seader_uart->serial_handle, RAW_BAUDRATE_DEFAULT);
furi_hal_serial_configure_framing(
seader_uart->serial_handle,
@@ -62,12 +67,6 @@ void seader_uart_serial_init(Seader* seader, uint8_t uart_ch) {
furi_hal_serial_dma_rx_start(
seader_uart->serial_handle, seader_uart_on_irq_rx_dma_cb, seader_uart, false);
// NOTE: Consider putting this before the UART setup if we find the ATR on startup is problematic
furi_hal_pwm_start(FuriHalPwmOutputIdLptim2PA4, PWM_FREQ, 50);
furi_hal_gpio_init(RESET_PIN, GpioModeOutputPushPull, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_write(RESET_PIN, true); // Active low, so set high
}
}