mirror of
https://github.com/DarkFlippers/unleashed-firmware.git
synced 2026-07-02 13:21:46 +00:00
Alexey Zakharov
7bbe1567d3
* Add integration test docs, discussion guidelines, and edit contribution guide * Editorial changes to the integration test page * Test cases fixed * Backslashes removed * Fixes from ellyromanova * Update pull_request_template.md * Delete two issue templates * Remove notion of the forum * Update CODEOWNERS * Fix general_test_cases.md symbol * Fix general_test_cases.md again --------- Co-authored-by: Ruslan Nadyrshin <110516632+rnadyrshin@users.noreply.github.com> Co-authored-by: Štefan Croitoru <66339601+turbospok@users.noreply.github.com>
130 lines
3.6 KiB
Markdown
130 lines
3.6 KiB
Markdown
# CLI — Test Cases
|
|
|
|
## 1. CLI. Control commands
|
|
|
|
Steps:
|
|
|
|
1. Run Power command.
|
|
|
|
**Expected result:** a list of available commands is displayed.
|
|
|
|
2. Execute all commands from the list.
|
|
|
|
**Expected result:**
|
|
|
|
1. Power OFF - when the cable is disconnected, the flipper will turn off.
|
|
2. Power reboot - the flipper will reboot.
|
|
3. Power reboot to dfu - the flipper will switch to dfu mode.
|
|
4. Power 5V 1 - will supply power to the 5V line of the top comb.
|
|
|
|
3. Run GPIO command.
|
|
|
|
**Expected result:** a list of available commands is displayed.
|
|
|
|
4. Execute all commands from the list
|
|
|
|
**Expected result:**
|
|
1. Mode - 1 - transmit mode, 0 - receive mode.
|
|
2. gpio_set PA7 1 When the debug board is inserted, the required LED lights up.
|
|
|
|
5. Run LED command, for example led b 255.
|
|
|
|
**Expected result:** LED lights up blue.
|
|
|
|
6. Command vibro
|
|
|
|
**Expected result:**
|
|
1. vibro 1 - vibration turns on.
|
|
2. vibro 0 - vibration turns off.
|
|
|
|
## 2. CLI. Information commands
|
|
|
|
Steps:
|
|
|
|
1. Call CLI minicom -D /dev/ttyACM0 -b 230400 or Open a terminal with Putty.
|
|
2. Enter the log command and enter the option that is needed, for example debug.
|
|
|
|
**Expected result:** when you press keys, enter menus, open applications, all this is displayed in the log.
|
|
|
|
3. Press Ctrl + C to end logging.
|
|
|
|
**Expected result:** logging has stopped.
|
|
|
|
4. On the main screen, press DOWN for 3 seconds to open the FW version info and Boot version info menu.
|
|
|
|
5. Run the device_info or ! command and compare the data.
|
|
|
|
**Expected result:**
|
|
1. FW data matches.
|
|
2. Bootloader open" data matches.
|
|
|
|
6. Run the command bt hci_info.
|
|
|
|
**Expected result:** after the bt command cmd list is displayed.
|
|
|
|
7. Compare the obtained valueswith the reference ones:
|
|
|
|
Ret: 0, HCI_Version: 11, HCI_Revision: 16484, LMP_PAL_Version: 11, Manufacturer_Name: 48,
|
|
LMP_PAL_Subversion: 8548
|
|
|
|
**Expected result:** data matches.
|
|
|
|
8. Run DATE command.
|
|
|
|
**Expected result:** real time and date displayed.
|
|
|
|
9. Run the commands help and ?.
|
|
|
|
**Expected result** a description of all available commands appears.
|
|
|
|
10. Execute the FREE command.
|
|
|
|
**Expected result:** free space in internal memory is displayed.
|
|
|
|
11. Run the FREE_BLOCKS command.
|
|
|
|
**Expected result:** block addresses appeared.
|
|
|
|
## 3. CLI. Storage Commands
|
|
|
|
Steps:
|
|
|
|
1. Insert SD card with data.
|
|
|
|
2. Run the command storage info /ext.
|
|
|
|
**Expected result:** there is information about free space.
|
|
|
|
3. Run the command storage format /ext.
|
|
|
|
**Expected result:** confirmation that the card has been formatted appears.
|
|
|
|
4. Refuse formatting.
|
|
|
|
**Expected result:** the card is not formatted, the free space has not changed.
|
|
|
|
5. Run the storage format /ext command again and confirm formatting.
|
|
|
|
**Expected result:** the card is formatted.
|
|
|
|
6. Run the command storage info /ext.
|
|
|
|
**Expected result:** while the card is inside, SD status: OK.
|
|
|
|
7. Remove the SD card and send the command storage info /ext.
|
|
|
|
**Expected result:** when the card is removed: SD card not mounted: If an SD card is inserted, pull it and reinsert it.
|
|
|
|
8. Run the factory_reset command, and when asked All data will be lost. Are you sure (y/n)? enter n.
|
|
|
|
**Expected result:** a data loss warning appears and nothing happens if you disagree.
|
|
|
|
9. Run the factory_reset command again, when asked All data will be lost. Are you sure (y/n)? enter y.
|
|
|
|
**Expected result:**
|
|
1. When confirmed, the data is erased.
|
|
2. A welcome message appears on the main screen, settings are reset.
|
|
3. Data on SD card is not erased.
|
|
4. Settings reset.
|
|
5. Time hasn't reset.
|