Kaj SchittecatandClaude Opus 5
202ea050ca
The per-board OTA_BIN_NAME chain ended in a bare #else naming the Heltec V4 TFT, so any board nobody had added to it silently downloaded the V4 image. Update.end() only checks that an image is valid for an ESP32-S3, which the V4 build is, so nothing stopped it being flashed. The Seeed Wio Tracker L2 shipped exactly like that. Its build defines only HAS_WIO_TRACKER_L2, which the chain never tested, and the released beta_79 image carries "wadamesh-heltec-v4-tft" as its update name: an on-device update on a Wio L2 installs Heltec V4 firmware onto Wio hardware and needs a USB reflash to recover. The T-Deck Pro (HAS_TDECK_PRO) was in the same position and would have done the same the moment it was published. Every board is now listed explicitly, the V4 TFT included (the V4-R8 also defines HELTEC_LORA_V4_TFT, and its branch already comes first), and anything unlisted is an #error. Forgetting this table is now a build break instead of a field brick. Verified on all twelve OTA-capable targets: each compiles, and each binary asks for exactly the artifact release.sh publishes for it (checked mechanically: 10 PlatformIO envs plus both T-Display P4 SKUs, no mismatches). Units already on beta_77 to beta_79 still have the wrong name compiled in, so Wio L2 owners must update from the website over USB rather than on the device until they are on a build with this fix. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A real touchscreen UI for your mesh radio. · open source · GPL-3.0
Touch-UI MeshCore companion-radio firmware for the LilyGo T-Deck / T-Deck Plus, Heltec V4 + TFT and eight other boards (ESP32-S3).
An LVGL touch UI — map, chat, contacts, channels, settings — split out of
meshcomod. The app depends on a
MeshCore fork via PlatformIO lib_deps.
Boards
See DEVICES.md for the full support matrix, install paths and per-board status.
- LilyGo T-Deck / T-Deck Plus — env
LilyGo_TDeck_companion_radio_touch(stable) - Heltec V4 + TFT + CHSC6x touch — env
heltec_v4_tft_companion_radio_usb_tcp_touch(stable) - Tanmatsu (ESP32-P4) — built from
tanmatsu/(ESP-IDF), ships via the Tanmatsu app store — sideload guide for running your own build - Elecrow ThinkNode M9 — env
ThinkNode_M9_companion_radio_touch(beta) — keyboard & d-pad guide - RAK WisMesh Tap V2 (RAK3312) — env
rak_tap_v2_companion_radio_touch(beta) - LilyGo T-Lora Pager — envs
tlora_pager_lr1121_companion_radio_touch/tlora_pager_sx1262_companion_radio_touch(beta) — keyboard shortcuts - Heltec V4-R8 + Expansion Kit V2 — env
heltec_v4_r8_tft_companion_radio_usb_tcp_touch(beta) - LilyGo T-Display P4 — built from
tdisplay_p4/(ESP-IDF); AMOLED by default,WADA_P4_LCD=1for the TFT-LCD SKU (beta) - Attaky Mesh Series — env
attaky_mesh_series_companion_radio_touch(beta)
Architecture
This repo holds only the app: the companion_radio glue, the ui-touch
LVGL UI, each board's glue/variants, and platformio.ini. The MeshCore
core is not vendored here — it's pulled as a library via lib_deps from the
ALLFATHER-BV/meshcomod monorepo
(the same repo as the non-touch firmware), pinned by a lean source-only core-*
git tag. The touch-app files this repo owns (TouchPrefsStore, WifiRuntimeStore,
the transports, …) are dropped from the lib via -DMC_VENDORED_TOUCH_APP so they
aren't compiled twice. The build is byte-identical to the original in-tree
meshcomod firmware.
Lua apps use the on-device SDK described in LUA_APPS.md. For WAV/MP3 playback, including a ready-to-sideload transport test app and exact SD and internal-storage paths, see AUDIO_PLAYBACK_TESTING.md.
Build
PlatformIO pulls the core fork and all libraries automatically:
pio run -e heltec_v4_tft_companion_radio_usb_tcp_touch # Heltec V4 TFT
pio run -e LilyGo_TDeck_companion_radio_touch # LilyGo T-Deck
# or just `pio run` to build both
Flash with the NVS-preserving 4-component chain (bootloader / partitions /
boot_app0 / firmware at 0x0 / 0x8000 / 0xe000 / 0x10000) so saved Wi-Fi
credentials survive — not a merged image, which 0xFF-pads and wipes NVS.
Contributing
Contributions are welcome — see CONTRIBUTING.md. One topic per PR; inbound contributions are accepted under the project's GPL-3.0 license.
License
GPL-3.0-or-later — see LICENSE. wadamesh is copyleft: anyone who distributes a build or a fork must also make their source available under the GPL. This keeps the UI open and concentrates community effort instead of fragmenting it into closed forks.
wadamesh incorporates and depends on MeshCore (MIT, © Scott Powell / rippleradios.com) and other third-party components — see NOTICE for the full list and their licenses. MeshCore-derived files keep their MIT notices; the combined work is distributed under the GPL (MIT is GPL-compatible). The MeshCore fork that wadamesh builds against stays MIT on purpose, so its Wi-Fi/BLE hooks remain upstreamable to MeshCore.