Christopher Van HooseandClaude Fable 5
d91737bb3f
The Lua app page painted itself 0x0E1216 while the rest of the firmware paints pure black (COLOR_BG), so every app read as a lighter panel floating over the UI. The page is now black and wada.ui.colors gains `panel` for the raised surface an app draws on top of it -- the compass dial uses it, so the instrument stands out instead of the page doing it. Rotate/flip are gone from the user's side. They existed because the QMC6309's axis orientation on the M9 is undocumented, which is not the user's problem to solve by trial and error. `A` now does the whole job: whether the heading runs clockwise or anticlockwise follows from which way the sensor's Z axis faces, and that shows in the sign of the vertical field -- Earth's field dips down north of the magnetic equator and up south of it -- so with a position (a fix, or the node's last known one) the app reads the handedness off the sensor and the press only has to set the offset. `F` stays as the fallback for a flat field or no position at all. Layout: stats column on the left, dial on the right (its status line above it, the hint centred along the bottom). The host harness now tumbles the simulated device during calibration rather than spinning it flat -- min/max on an axis that never moves subtracts the true field along it, which is precisely the case the handedness check has to detect and refuse, and the flat mock was hiding it. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A real touchscreen UI for your mesh radio. · open source · GPL-3.0
Touch-UI MeshCore companion-radio firmware for the LilyGo T-Deck / T-Deck Plus and Heltec V4 + TFT (ESP32-S3).
An LVGL touch UI — map, chat, contacts, channels, settings — split out of
meshcomod. The app depends on a
MeshCore fork via PlatformIO lib_deps.
Boards
See DEVICES.md for the full support matrix, install paths and per-board status.
- LilyGo T-Deck / T-Deck Plus — env
LilyGo_TDeck_companion_radio_touch(stable) - Heltec V4 + TFT + CHSC6x touch — env
heltec_v4_tft_companion_radio_usb_tcp_touch(stable) - Tanmatsu (ESP32-P4) — built from
tanmatsu/(ESP-IDF), ships via the Tanmatsu app store - Elecrow ThinkNode M9 — env
ThinkNode_M9_companion_radio_touch(beta) — keyboard & d-pad guide - RAK WisMesh Tap V2 (RAK3312) — env
rak_tap_v2_companion_radio_touch(beta)
Architecture
This repo holds only the app: the companion_radio glue, the ui-touch
LVGL UI, the two boards' glue/variants, and platformio.ini. The MeshCore
core is not vendored here — it's pulled as a library via lib_deps from the
ALLFATHER-BV/meshcomod monorepo
(the same repo as the non-touch firmware), pinned by a lean source-only core-*
git tag. The touch-app files this repo owns (TouchPrefsStore, WifiRuntimeStore,
the transports, …) are dropped from the lib via -DMC_VENDORED_TOUCH_APP so they
aren't compiled twice. The build is byte-identical to the original in-tree
meshcomod firmware.
Build
PlatformIO pulls the core fork and all libraries automatically:
pio run -e heltec_v4_tft_companion_radio_usb_tcp_touch # Heltec V4 TFT
pio run -e LilyGo_TDeck_companion_radio_touch # LilyGo T-Deck
# or just `pio run` to build both
Flash with the NVS-preserving 4-component chain (bootloader / partitions /
boot_app0 / firmware at 0x0 / 0x8000 / 0xe000 / 0x10000) so saved Wi-Fi
credentials survive — not a merged image, which 0xFF-pads and wipes NVS.
Contributing
Contributions are welcome — see CONTRIBUTING.md. One topic per PR; inbound contributions are accepted under the project's GPL-3.0 license.
License
GPL-3.0-or-later — see LICENSE. wadamesh is copyleft: anyone who distributes a build or a fork must also make their source available under the GPL. This keeps the UI open and concentrates community effort instead of fragmenting it into closed forks.
wadamesh incorporates and depends on MeshCore (MIT, © Scott Powell / rippleradios.com) and other third-party components — see NOTICE for the full list and their licenses. MeshCore-derived files keep their MIT notices; the combined work is distributed under the GPL (MIT is GPL-compatible). The MeshCore fork that wadamesh builds against stays MIT on purpose, so its Wi-Fi/BLE hooks remain upstreamable to MeshCore.