mirror of
https://github.com/mikecarper/MeshCore.git
synced 2026-10-28 18:15:13 +00:00
Record V4 MQTT setup and Bellevue G2 Full Repeater update [skip ci]
This commit is contained in:
mikecarper committed
1 parent
a926341f53
commit
e16db81040
2 files changed
+283
No files matched your search
@@ -0,0 +1,72 @@
|
||||
<!-- meshcore-hosted-doc-link:start -->
|
||||
<p class="meshcore-hosted-doc-link"><a href="https://mikecarper.github.io/MeshCore/test-results/v4_mqtt_bellevue_g2_2026-10-21/">View this page on MeshCore Docs</a>.</p>
|
||||
<!-- meshcore-hosted-doc-link:end -->
|
||||
|
||||
# V4 MQTT setup and Bellevue G2 Full Repeater, 21 October 2026
|
||||
|
||||
Status: **PASS for the requested setup and deployment**. The Mercerwood V4
|
||||
is left connected to its saved US analyzer MQTT preset. Bellevue's Station G2
|
||||
now runs the current Full Repeater application, with repeating enabled and its
|
||||
USB gateway service restored. No firmware source change was needed.
|
||||
|
||||
## V4 MQTT
|
||||
|
||||
The V4 retains its measured `2bd4cb4d` Full Companion application. Its saved
|
||||
MQTT switch was already on, while WiFi was off and the MQTT region was empty.
|
||||
The setup saved region `SEA`, enabled the existing WiFi configuration and kept
|
||||
the `analyzer-us` preset. This preset uses WSS and device-signed JWT
|
||||
authentication. WiFi and admin passwords were not changed.
|
||||
|
||||
The first connection obtained two broker PUBACKs. A subsequent 137.367-second
|
||||
held observation recorded PUBACK growth from 3 to 5, uptime from 29,881 to
|
||||
30,017 seconds, zero core errors and empty core queues. Every sample had an
|
||||
empty MQTT outbox and zero queue/drop counters. Free DMA memory stayed at
|
||||
50,056 bytes or more, with a largest block of 49,140 bytes.
|
||||
|
||||
The one-minute test status interval was restored to its original five minutes.
|
||||
That setting restarts the MQTT worker; a separate final check confirmed WiFi,
|
||||
MQTT and a new broker acknowledgment after the restart. WiFi and MQTT remain
|
||||
enabled. Other saved broker slots and radio settings were not changed.
|
||||
|
||||
PUBACK verifies that the broker accepted a publication. An independent
|
||||
subscriber payload receipt was not measured because no subscriber account was
|
||||
available. This finite observation does not replace a long-duration WSS soak.
|
||||
|
||||
## Bellevue Station G2
|
||||
|
||||
| Item | Result |
|
||||
| --- | --- |
|
||||
| Canonical target | `Station_G2_repeater_observer_mqtt`, built through the Full release profile |
|
||||
| Installed version | `v1.18.0.1-halo-keymind-cascade-dev-observer-a926341f` |
|
||||
| Application body / target | `4233FACEB6C44EAE` / `DBB6A855` |
|
||||
| Application SHA256 | `459f2e1de20460b54ac00cd545dfe11490b13081072c3aed47b1398dd276dcf5` |
|
||||
| Build gates | Full capability and memory gates passed; 200,432 available internal bytes versus 192,656 required heap bytes |
|
||||
| Installation | Actual ESP32-S3 identity and 16 MiB layout verified; CRC-valid OTA metadata selected the active slot at `0x650000`, size `0x640000` |
|
||||
| Readback | All 2,118,264 application bytes verified; partition table, OTA metadata and NVS hashes unchanged during the write |
|
||||
| Persistence | Original public identity, name, radio, TX power, WiFi SSID, MQTT settings and power-saving choice preserved |
|
||||
| Repeater mode | Role-specific getter accepted; repeating was already on and remains on |
|
||||
| Final health | Core errors 0, outbound queue 0; local packet counters showed 84 received and 18 sent |
|
||||
| Service handback | Original `mctomqtt.service` is active and again owns the exact G2 USB endpoint |
|
||||
|
||||
The combined Full recipe retains `observer` in its version string and includes
|
||||
the repeater implementation, MQTT, ESP-NOW, USB logging, WiFi OTA and LoRa OTA.
|
||||
The build's Full overlay enables the LoRa update path. Saved operating settings
|
||||
remain 910.525 MHz / BW62.5 / SF7 / CR5 and TX 19 dBm.
|
||||
|
||||
The application-only update preserved the existing expanded layout. It made no
|
||||
whole-chip erase or full-flash backup. Small protected NVS reads were hashed
|
||||
and removed; after boot, saved logical settings and the full public identity
|
||||
were independently compared with the original observations.
|
||||
|
||||
The first postboot check had zero core errors and one in-flight radio packet
|
||||
at uptime 13 seconds. The initial harness required an immediately empty queue
|
||||
and stopped handback at that check. A bounded follow-up on the same installed
|
||||
firmware verified the exact version, body, identity and repeater role, then
|
||||
recorded an empty queue with zero errors at uptime 149 seconds and restored
|
||||
the original USB gateway. That early failed gate is retained in the evidence;
|
||||
no second firmware installation was performed.
|
||||
|
||||
The [safe receipt](v4_mqtt_bellevue_g2_2026-10-21.safe.json) records artifact
|
||||
bindings, timings and evidence hashes. The local packet counters demonstrate
|
||||
observed radio activity; independent peer delivery, RF range, physical OTA
|
||||
installation and long-duration behavior were not tested in this deployment.
|
||||
@@ -0,0 +1,211 @@
|
||||
{
|
||||
"schema": 1,
|
||||
"report_date": "2026-10-21",
|
||||
"status": "PASS",
|
||||
"scope": "Requested V4 MQTT setup and Bellevue Station G2 Full Repeater installation; source-bound finite runtime checks, preserving saved configuration.",
|
||||
"v4": {
|
||||
"schema": 1,
|
||||
"status": "PASS",
|
||||
"device": "Heltec V4.3 OLED",
|
||||
"firmware_source": "2bd4cb4d119ce4d588b91a3aa9cfda507e188c13",
|
||||
"firmware_reflashed": false,
|
||||
"saved_configuration": {
|
||||
"wifi_enabled": true,
|
||||
"mqtt_enabled": true,
|
||||
"slot1_preset": "analyzer-us",
|
||||
"transport": "WSS with existing device-signed JWT authentication",
|
||||
"region_iata": "SEA",
|
||||
"report_interval_minutes": 5,
|
||||
"wifi_password_changed": false,
|
||||
"admin_password_changed": false,
|
||||
"other_saved_broker_slots_changed": false,
|
||||
"radio_settings_changed": false
|
||||
},
|
||||
"measurements": {
|
||||
"connected_with_broker_PUBACK": true,
|
||||
"setup_pub_ack": 2,
|
||||
"stability_started_at": "2026-10-21T15:49:59.562699+00:00",
|
||||
"stability_finished_at": "2026-10-21T15:52:16.929845+00:00",
|
||||
"stability_elapsed_seconds": 137.367146,
|
||||
"pub_ack_before": 3,
|
||||
"pub_ack_after": 5,
|
||||
"uptime_before": 29881,
|
||||
"uptime_after": 30017,
|
||||
"all_core_errors_zero": true,
|
||||
"all_core_queues_zero": true,
|
||||
"all_mqtt_outboxes_zero": true,
|
||||
"all_mqtt_drops_zero": true,
|
||||
"DMA_free_bytes": [
|
||||
[
|
||||
50064,
|
||||
49140
|
||||
],
|
||||
[
|
||||
50064,
|
||||
49140
|
||||
],
|
||||
[
|
||||
50056,
|
||||
49140
|
||||
],
|
||||
[
|
||||
50060,
|
||||
49140
|
||||
],
|
||||
[
|
||||
50056,
|
||||
49140
|
||||
],
|
||||
[
|
||||
50064,
|
||||
49140
|
||||
]
|
||||
],
|
||||
"final_reconnect_after_restoring_5min_interval_pub_ack": 1
|
||||
},
|
||||
"limits": [
|
||||
"Broker acknowledgments confirm accepted publications; independent subscriber payload receipt was not measured",
|
||||
"The held observation is finite, not a long-duration soak",
|
||||
"Slot2 analyzer-eu remains saved; its connectivity is not claimed"
|
||||
],
|
||||
"evidence_sha256": {
|
||||
"v4-initial.private.json": "799ce0686dfaf31e9b5d3a0b5452782307cca1dd4bd166f5a96f4cc117ae3ac0",
|
||||
"v4-config-before.private.json": "beb2e22068855f6bb191ceed9040552a4958c942c81017ac97f7b2821b1c2b04",
|
||||
"v4-mqtt-setup.private.json": "435d3d64c912cee42055cede3f57898713f442683af9de9c47a5a94af165e3de",
|
||||
"v4-mqtt-observe.private.json": "03512b2b5a53fce3049e4d05814b31e722628d2f0f328079f63c03f14eee3390",
|
||||
"v4-mqtt-finish.private.json": "59ac5a0b47733de6fae4031d15e4af347ec4ab5941369d9b672d0d28653d4a48",
|
||||
"v4-final-handoff.private.json": "178a1ce9daa2aa9b4c2f518b19270ac2834609f358de7fefcf23b1e8c00238ca"
|
||||
}
|
||||
},
|
||||
"g2": {
|
||||
"status": "PASS",
|
||||
"board": "Station G2",
|
||||
"target": "Station_G2_repeater_observer_mqtt",
|
||||
"source_commit": "a926341f53f25895c1b827e7a9ded3fe3948707e",
|
||||
"runtime_version": "v1.18.0.1-halo-keymind-cascade-dev-observer-a926341f",
|
||||
"body_hash": "4233FACEB6C44EAE",
|
||||
"target_id": "DBB6A855",
|
||||
"application_sha256": "459f2e1de20460b54ac00cd545dfe11490b13081072c3aed47b1398dd276dcf5",
|
||||
"application_bytes": 2118264,
|
||||
"build": {
|
||||
"passed": true,
|
||||
"profile": "full",
|
||||
"available_internal_bytes": 200432,
|
||||
"required_heap_bytes": 192656,
|
||||
"required_contiguous_bytes": 21184,
|
||||
"verified_capabilities": [
|
||||
"bridge.espnow",
|
||||
"profile.full",
|
||||
"release.full.same_partition_successor",
|
||||
"ota.update.wifi",
|
||||
"ota.update.lora",
|
||||
"cli.retry_preset",
|
||||
"telemetry.history",
|
||||
"ota.cli",
|
||||
"web.webconfig",
|
||||
"logging.usb.packets",
|
||||
"logging.usb.control",
|
||||
"logging.usb.output"
|
||||
],
|
||||
"physical_OTA_install_tested_this_task": false
|
||||
},
|
||||
"installation": {
|
||||
"method": "USB active-application-slot update via identity-bound real flasher session",
|
||||
"application_address": 6619136,
|
||||
"slot_size": 6553600,
|
||||
"flash_bytes": 16777216,
|
||||
"CRC_valid_active_OTA_selection": true,
|
||||
"full_application_readback_verified": true,
|
||||
"partition_table_unchanged_during_write": true,
|
||||
"OTA_metadata_unchanged_during_write": true,
|
||||
"NVS_hashes_unchanged_during_write": true,
|
||||
"whole_flash_erased": false,
|
||||
"full_flash_backup_created": false,
|
||||
"finished_before_runtime_check": "2026-10-21T16:13:57.046009+00:00"
|
||||
},
|
||||
"handback": {
|
||||
"repeater_role_verified": true,
|
||||
"repeat_on": true,
|
||||
"repeating_setting_changed": false,
|
||||
"persisted_public_identity_preserved": true,
|
||||
"saved_settings_preserved": [
|
||||
"radio",
|
||||
"TX power",
|
||||
"name",
|
||||
"WiFi SSID",
|
||||
"MQTT region",
|
||||
"MQTT slot1 preset",
|
||||
"MQTT enabled",
|
||||
"power saving"
|
||||
],
|
||||
"radio_MHz": 910.5250244,
|
||||
"bandwidth_kHz": 62.5,
|
||||
"SF": 7,
|
||||
"CR": 5,
|
||||
"TX_dBm": 19,
|
||||
"gateway_service": "mctomqtt.service",
|
||||
"gateway_active_and_owns_exact_USB_radio": true,
|
||||
"finished_at": "2026-10-21T16:16:16.796932+00:00",
|
||||
"core": {
|
||||
"battery_mv": 0,
|
||||
"uptime_secs": 149,
|
||||
"errors": 0,
|
||||
"queue_len": 0
|
||||
},
|
||||
"local_packet_counters": {
|
||||
"recv": 84,
|
||||
"sent": 18,
|
||||
"flood_tx": 17,
|
||||
"direct_tx": 1,
|
||||
"flood_rx": 84,
|
||||
"direct_rx": 0,
|
||||
"recv_errors": 53
|
||||
}
|
||||
},
|
||||
"history": {
|
||||
"preinstall_version": "v1.17.1.9-halo-keymind-cascade-dev-observer-88c85108 (Build: 07-Oct-2026)",
|
||||
"preinstall_core": {
|
||||
"battery_mv": 0,
|
||||
"uptime_secs": 514679,
|
||||
"errors": 2,
|
||||
"queue_len": 0
|
||||
},
|
||||
"initial_postboot_core": {
|
||||
"battery_mv": 0,
|
||||
"uptime_secs": 13,
|
||||
"errors": 0,
|
||||
"queue_len": 1
|
||||
},
|
||||
"initial_gate": "First updater required an immediately empty queue and stopped handback when one in-flight packet was present; core errors were zero.",
|
||||
"followup": "Same installed firmware, exact role/identity/body check and bounded queue settling; final core errors and queue zero; original service restored. No second flash."
|
||||
},
|
||||
"evidence_sha256": {
|
||||
"g2-repeater-mode.private.json": "33bd01887f37976ae57625cc38bed19f4d1b67ceefb138d48a923d6540448007",
|
||||
"g2-update.private.json": "d5fdd68a7c4b69490e044bb13382aecff6bfac165533667f60a872279c1cb422",
|
||||
"esptool5-toolchain.safe.json": "b1aa669f926122c685da2bd3b913ce5293b3b032766509abebe5a2a5817a4d0a",
|
||||
"g2-preflight-maintenance.private.json": "bc64ad47f4f91d083586ea60ea5bf8cce9752eaa64a42aa15127595f9fa19ad7",
|
||||
"g2-post-update-runtime.private.json": "cadcd09599d017796f6cc40cb806c28b6d876020ebdabab16cfce1521bda9a83",
|
||||
"g2-initial.private.json": "58ff2cb0cd0cf1c265a443f6e8998512e2dee09f6309465583514ae70134b934",
|
||||
"g2-app-only.5PDUMy/otadata-before.bin": "062f79dd9748aef0e56afddd5db3112af00549478e9d478e38137d5f3232f3a3",
|
||||
"g2-app-only.5PDUMy/readback-validation.log": "4a23e7cd0007c14ffa1315243d874da297c8f5d07f4691084a77b5f532020a68",
|
||||
"g2-app-only.5PDUMy/inputs.json": "c465b370c19591754661313afd5c175c9c5a951071101517561051083a027bb9",
|
||||
"g2-app-only.5PDUMy/chip-id.log": "4fbc18754870b54011aa466f2d745f41cdf8a3abe625ad21c61267c97891f085",
|
||||
"g2-app-only.5PDUMy/otadata-after.bin": "062f79dd9748aef0e56afddd5db3112af00549478e9d478e38137d5f3232f3a3",
|
||||
"g2-app-only.5PDUMy/table-after.bin": "9af3af2b74e944337ba85f2b0027ee80df160579a1ab746ba0f95853f618cd60",
|
||||
"g2-app-only.5PDUMy/flash-id.log": "7081b077e1d870cac28a1f27a1718d7cc478d77d16c71aaef09bde9925dabaf7",
|
||||
"g2-app-only.5PDUMy/finish.log": "bf1313b4bcf482b65afac381e7023e6ce4deb2a1fcbb139a434166053ee7d898",
|
||||
"g2-app-only.5PDUMy/receipt.safe.json": "18ff87dc1063d858b273084d398feb1ac0fe003ee0fe9a30073e9573347a024b",
|
||||
"g2-app-only.5PDUMy/protected-after-hashes.json": "0d26cc446d400d03279716e6724cb265fd27cbb78031c35dfe9a5a4b14a08c79",
|
||||
"g2-app-only.5PDUMy/write.log": "d9cd5efaa91bafbf271380ab0eac5124f27393e482fe87596fdf21b3734560b3",
|
||||
"g2-app-only.5PDUMy/protected-hashes.json": "73679b17f25c18d20608835e8a689ab4e2d536f32d8888cb1ff3ab368166c264",
|
||||
"g2-app-only.5PDUMy/table-before.bin": "9af3af2b74e944337ba85f2b0027ee80df160579a1ab746ba0f95853f618cd60"
|
||||
},
|
||||
"limits": [
|
||||
"Local radio counters establish observed activity, not independent peer delivery or RF range",
|
||||
"No physical WiFi/LoRa OTA installation, long-duration load or power measurements in this task",
|
||||
"Protected NVS/table/OTA hashes refer to the flash-write interval; saved logical settings and identity were separately compared after boot"
|
||||
]
|
||||
},
|
||||
"firmware_source_changed_in_this_task": false,
|
||||
"other_boards_or_gateway_services_changed": false
|
||||
}
|
||||
Reference in new issue
Block a user