Commit Graph
214 Commits
Author SHA1 Message Date
Scott Powell 7b8ac81527 * companion UI's moved/refactored to src/helpers/ui
* only select variants .ini config refactored so far (Heltec V3, MeshTracker V1, LilyGo T-Echo Card)
2026-11-18 22:00:04 +11:00
Eve 0dbf8f62c3 change prefix as well 2026-11-14 15:17:32 -05:00
Eve 2a53a81e82 use ble.name 2026-11-13 20:35:32 -05:00
Eve 4c7a134e15 add cli option to set custom bluetooth name 2026-11-12 11:09:43 -05:00
fdlamotte e6d141d6f7 Merge pull request #3785 from AlexandrTyshchenko/feature/companion-adc-multiplier
Companion: set/get adc.multiplier CLI command
2026-11-10 08:11:33 -04:00
fdlamotte 62ae611afd Merge pull request #3753 from fdlamotte/gps_refactor
Big GPS refactor
2026-11-10 07:44:00 -04:00
Olexandr Tyshchenko da1828fd9d Companion: set/get adc.multiplier CLI command, persisted in prefs
Repeaters, room servers and sensors already let the battery ADC multiplier be tuned with 'set adc.multiplier' (CommonCLI). The companion firmware had no equivalent, so a board whose divider differs from the build default (common on DIY ProMicro / Faketec boards) always reported a wrong battery voltage.

Adds the same command to the companion CLI. The value is stored in the companion prefs (comp.adc_mult, 0 = board default) and applied at startup via MainBoard::setAdcMultiplier().
2026-11-08 18:07:58 +02:00
Florent 6eea5e7185 ui_task: let user choose if enter in gps screen toggles or triggers gps 2026-11-08 08:47:35 -04:00
Florent fe6a47d0c9 gps: move the gps CLI to GpsPrefs and convert all targets 2026-11-08 08:47:34 -04:00
anders-dc 9fd02ff3bc fix(companion): guard null _serial in contact overwrite and full callbacks 2026-11-08 11:01:05 +01:00
Liam Cottle 77d81d1f82 Merge pull request #3603 from A13xB0/companion-buzzer-cli
Add CLI command to toggle the buzzer for companions
2026-10-30 12:53:18 +13:00
Florent 5d7100ae7d ui: add some parameters to the cli (mostly regarding eink behaviour) 2026-10-29 08:34:41 -04:00
ripplebiz 46216b2d0d Merge pull request #3617 from aXistem-dev/feat/tz-offset-quarter-hours
Show quarter-hour timezone offsets with two decimals
2026-10-26 12:27:10 +11:00
Marcel Verdult 56b5f4e9c6 fix(chat): refuse a negative text length for a group message
CMD_SEND_CHANNEL_TXT_MSG reads txt_type, channel_idx and a 4 byte timestamp, so
the frame needs 7 bytes before the text starts, and the branch had no length
guard. For a shorter frame "len - i" is computed in size_t, wraps, and reaches
sendGroupMessage() as a negative int. The clamp there tests
"text_len + prefix_len > MAX_TEXT_LEN", which a negative value passes, and the
following memcpy() converts the length back to a size_t: a 3 byte frame asks for
4294967292 bytes into a 197 byte stack buffer.

Two guards, because there are two mistakes. The branch now states its minimum
like most other branches of handleCmdFrame do, so a frame below 7 bytes is
answered through the existing path instead of being parsed. And
sendGroupMessage() refuses a negative length the way sendGroupData() in the same
file already does, which protects every other caller.

A frame of exactly 7 bytes keeps working and sends an empty message, as before.

Evidence. On a T-Echo running dev 428a95c6, built with
FIRMWARE_BUILD_DATE "f1-dev" and confirmed by "ver => v1.18.0 (Build: f1-dev)":

  CH_TXT len=7    -> RESP_CODE_OK
  GET_STATS core  -> uptime=78s
  CH_TXT len=3    -> NO REPLY
  DEVICE_QUERY    -> NO REPLY  (three times over 8 s, node never came back)
2026-10-22 09:33:07 +00:00
Confituurke a8e8d01a3c Use two decimals only for exact quarter-hour offsets 2026-10-21 11:24:34 +02:00
R0ck 2ed45f08e7 Move to companion firmware, remove from varient 2026-10-17 23:37:14 +01:00
Confituurke b7389353e2 Show quarter-hour timezone offsets with two decimals
'get tz.offset' printed one decimal, so a UTC+5:45 offset (5.75)
read back as 5.8. Print two decimals when the offset is on a quarter
hour (x.25 / x.75); everything else keeps one decimal.
2026-10-17 13:03:06 +02:00
liamcottle 7a0fde2912 timezone offset is now stored as float to allow half hour offsets 2026-10-17 15:16:38 +13:00
Scott Powell b204f9a114 * changed onUnhandledResponse() to return true if handled/consumed
* unhandled responses (eg. push telemetry) now sent to app as PUSH_CODE_BINARY_RESPONSE frames
2026-09-24 13:49:57 +10:00
ripplebiz b37e7dd955 Merge pull request #3431 from meshcore-dev/abstract-ui-overhaul
Abstract UI overhaul
2026-09-20 18:08:29 +10:00
liamcottle 73afe3a0f5 allow fetching configured wifi password via companion cli 2026-09-20 14:22:13 +12:00
Scott Powell 64434c5326 * misc 2026-09-19 20:13:18 +10:00
liamcottle 242e401a2c added reboot, shutdown and poweroff to companion cli commands 2026-09-18 18:17:52 +12:00
Scott Powell b3b17025e3 * more MyMesh::Listener interface hooks 2026-09-17 17:33:36 +10:00
Scott Powell 30dd723c26 * MyMesh::begin() refactor, removing last display concepts 2026-09-17 14:25:41 +10:00
Scott Powell 5c3d9281ff * refactored the UI_DISCOVER_* feature 2026-09-17 13:45:33 +10:00
Scott Powell 3caf033de2 * refactor: removed UITask dependency from MyMesh. New MyMesh::Listener interface
* UITask's are now a MyMesh task Listener
2026-09-16 21:03:44 +10:00
Scott Powell 53b6476409 Merge branch 'dev' into wio-tracker-L1-1W 2026-09-15 18:24:52 +10:00
ripplebiz 0984111d62 Merge pull request #3395 from jbrazio/fix/serial-command-clamp
[HIGH] Ensure command buffers stay NUL-terminated to prevent overflow
2026-09-11 14:09:24 +10:00
tekk 0a82fcd20d fix(companion): gate CMD_SEND_CHANNEL_DATA payload on MAX_GROUP_DATA_LENGTH
Payloads of 166 or 167 bytes previously passed the frame-sized bound
(MAX_CHANNEL_DATA_LENGTH = 167) but were rejected by sendGroupData
against MAX_GROUP_DATA_LENGTH (165), causing ERR_CODE_TABLE_FULL (retry
later) to be returned instead of ERR_CODE_ILLEGAL_ARG.

Fixes #3345
2026-09-09 22:10:41 +02:00
Liam Cottle 1751783931 Merge pull request #3357 from skandragon/feat/picow-wifi-ble
Add WiFi to RPI PicoW (and perhaps others)
2026-09-09 21:55:22 +12:00
liamcottle cee43752c7 add new ENABLE_WIFI_INTERFACE build flag for companions without providing ssid and pwd 2026-09-08 22:54:50 +12:00
liamcottle 6809fed159 simplify and remove 2 as a wifi enabled state 2026-09-08 21:30:17 +12:00
liamcottle 87a05e1589 allow remote management of wifi as user has cli permission 2026-09-08 18:33:37 +12:00
liamcottle bf64fafe90 simplify response message 2026-09-08 18:30:00 +12:00
liamcottle 790680e4d1 allow toggling wifi enabled regardless of stored ssid 2026-09-08 18:25:34 +12:00
Michael Graff 7c2b4d88be WiFi on/off tri-state: on when SSID set unless explicitly disabled; PicoW ships no default SSID 2026-09-06 22:18:00 -05:00
Michael Graff eb2ab10de0 Add wifi.enabled pref and CLI; skip WiFi when disabled or SSID blank 2026-09-06 21:56:25 -05:00
Michael Graff 98cf4f3332 Add get wifi.status and get wifi.ip CLI commands 2026-09-06 21:44:47 -05:00
Michael Graff b11a779843 Address review: per-variant wifi src, real SSID reply, rename PicoW env 2026-09-06 21:28:04 -05:00
Michael Graff b9fa450f52 Fix review findings on Pico W WiFi/BLE 2026-09-06 20:43:37 -05:00
ripplebiz 89ef200efa Merge pull request #3366 from recrof/companion-cli-fix-2
Companion CLI: fixed txdelay, direct.txdelay, agc.reset.interval, int.thresh
2026-09-07 10:42:48 +10:00
Rastislav Vysoky 5d82ed352c Companion CLI: fixed txdelay, direct.txdelay, agc.reset.interval, int.thresh 2026-09-06 15:14:35 +02:00
Michael Graff a4ac85a0d6 Address review findings on WiFi companion support
- scope the serial config CLI to RP2040; it was exposing the rescue CLI
  (cat/rm/erase) on every ESP32 WiFi build, which gates it behind a
  physical long-press
- bound and space out RP2040 rejoins: the core's join busy-waits, so cap
  it at 5s and retry every 30s instead of every 10s
- stamp the reconnect timer in setup(), so the first loop() doesn't tear
  down an association that is still finishing DHCP
- treat stored credentials as a pair, and pass NULL (not "") for an open
  network
- teach build_as_lib.py where SerialWifiInterface moved
2026-09-05 23:15:13 -05:00
Michael Graff 739a67c9f1 Allow WiFi credentials to be set at runtime
Store ssid/pwd in NodePrefs and set them with 'set wifi.ssid' /
'set wifi.pwd' over USB serial; build-time WIFI_SSID/WIFI_PWD stay as
the fallback. Headless WiFi builds get the config CLI on Serial, which
is otherwise unused there.
2026-09-05 23:15:13 -05:00
João Brázio 95214e8c40 Ensure command buffers stay NUL-terminated to prevent overflow
The serial command buffers must stay NUL-terminated within their
bounds: if they ever aren't, strlen() can return >= sizeof(command)
and the read loop would index past the buffer. Additionally, a full
buffer now becomes a completed line (end-of-line marker placed
inside the buffer, NUL terminator kept) instead of overwriting the
terminator and silently corrupting the buffer for the next pass.

Applies to the serial CLI readers of the repeater, room server,
sensor and secure chat examples, and to the CLI rescue reader of
the companion example.
2026-09-04 20:01:39 +01:00
Aleksei Mamlin 1d9a62ca4a companion: get/set timezone offset for clock
* Add tz_offset companion prefs and get/set commands for companion cli
* Use tz_offset for clock on display

Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com>
2026-08-31 09:08:22 +03:00
fdlamotte adbdcf00bb Merge branch 'dev' into node_discover_ui 2026-08-29 11:02:58 -04:00
Scott Powell 6dad3d5ab4 * companion: fix for setSpreadFactor(). "set cad ..." and "board" now implemented. 2026-08-24 20:44:17 +10:00
Scott Powell 5a162ff4c6 * new DynamicConfigSerializer
* board/variant KeyValueStore now can write to 'custom' object in Json prefs
2026-08-24 17:12:56 +10:00