c588540b1b
* new CMD_SEND_RAW_PACKET
2026-05-13 13:28:56 +10:00
12a37a224a
Merge pull request #2536 from recrof/patch-3
...
revert: "feat: Enable GPS on RAK 1W kit" (#2401 )
2026-05-13 00:41:41 +10:00
68363d9e4d
revert: "feat: Enable GPS on RAK 1W kit" ( #2401 )
...
reverted changes to RAK_BOARD and PIN_GPS_EN. setting `RAK_BOARD` would cause radio to stop working and end with RadioLib error -707
2026-05-12 15:56:28 +02:00
b0b87fd709
fix gps pins for lilygo t impulse plus
2026-05-12 10:36:19 +12:00
c4523f71a9
Merge pull request #2522 from liamcottle/board/lilygo-t-impulse-plus
...
Add support for LilyGo T-Impulse-Plus
2026-05-12 01:39:44 +12:00
2fdbfbdbf6
turn off 3.3v rail when powering off
2026-05-12 01:06:22 +12:00
96bbed225a
Merge pull request #2520 from Quency-D/heltec-mesh-node-t1
...
add heltec-mesh-node-t1
2026-05-12 00:38:14 +12:00
a49ee6ebe9
fix battery voltage reading
2026-05-11 22:17:53 +12:00
242c45f4a3
initial support for lilygo t impulse plus
2026-05-11 22:05:06 +12:00
3cdcb3ef84
Merge pull request #2519 from oltaco/customlfs-0.2.2
...
pin CustomLFS to version 0.2.2
2026-05-11 21:33:05 +12:00
6d3b71eed9
add heltec-mesh-node-t1
2026-05-11 15:11:07 +08:00
716ba8ee5e
pin CustomLFS to version 0.2.2
...
CustomLFS 0.2.2 adds support for the flash chip in LilyGo T-Echo Card and T-Echo Lite
2026-05-11 11:37:56 +10:00
3eacc49489
Merge pull request #2503 from jirogit/fix/techo-lite-non-shell-usb
...
feat(techo-lite): add USB companion radio target for non-shell variant
2026-05-10 22:40:12 +10:00
e7ea2fc563
Merge pull request #2516 from oltaco/disable-ds3231-probe
...
Add option to disable DS3231 RTC probe
2026-05-10 22:48:47 +12:00
e7e97ec438
add option to disable DS3231 probe
2026-05-10 20:29:47 +10:00
a3e1930176
Merge pull request #2511 from entr0p1/techo-lite-rf-fix
...
Corrected T-Echo Lite SX1262 RXEN and TXEN pins, TCXO voltage.
2026-05-10 19:55:20 +10:00
77bd994a61
T-Echo Lite LoRa radio fixes
...
- Set TCXO voltage to 1.8 (not defined previously, falls back to default)
- Set correct variable name for SX1262 RX/TX pins
- Fix SX1262 RX pin number
2026-05-09 14:26:55 +10:00
56d4671c2c
Merge pull request #2490 from tuzzmaniandevil/dev
...
Enhance KissModem frame processing and timeout handling
2026-05-08 23:23:14 +12:00
6e2e9cc33c
Merge pull request #2505 from liamcottle/feature/companion-repeat-build-flag
...
Add build flag to configure allowed repeat frequency range
2026-05-08 18:29:49 +10:00
841db56595
add build flag to configure allowed repeat freq range
2026-05-08 20:16:45 +12:00
5a6fd4c16a
feat(techo-lite): add USB companion radio target for non-shell variant
2026-05-08 00:38:04 -07:00
ffa76016ff
Address two comments from PR
2026-05-08 11:14:22 +12:00
0800f8d677
Merge pull request #2494 from uwl-cpe-2025/fix/missing-include
...
Add missing Wire.h include to sensors
2026-05-08 00:38:33 +12:00
4b6b8abe7a
Add missing Wire.h include for sensors
...
This slipped through in PR #2327 and I noticed because the TechoBoard.h
for my variant doesn't include the Wire header, so the source file
in question does not coincidentally obtain a copy.
2026-05-07 07:20:48 -05:00
51665881a2
Merge pull request #2492 from meshcore-dev/set-flood-scope-none
...
Companion: Set flood scope to None
2026-05-07 21:49:11 +12:00
6979326340
* CMD_SET_FLOOD_SCOPE_KEY, now with second variant for explicitly sending un-scoped
...
* FIRMWARE_VER_CODE bumped to 12
2026-05-07 16:51:03 +10:00
bf733f00a6
Merge pull request #2488 from weebl2000/fix-rak-pin-gps-en-undefined
...
Gate PIN_GPS_EN
2026-05-07 18:44:37 +12:00
b75cefbfb4
Merge pull request #2327 from NickDunklee/fix-environment-sensor-refactor
...
fix(sensors): improve sensor initialization and handling to prevent hangs and handle growth
2026-05-07 15:58:10 +10:00
314d777b42
Enhance KissModem frame processing and timeout handling
2026-05-07 00:03:09 +00:00
3bde089bdb
Gate PIN_GPS_EN
...
Do not reference it unconditionally
2026-05-07 00:31:15 +02:00
6b3df327e9
Merge pull request #2483 from oltaco/dev
...
fix CustomLFS version pinning
2026-05-06 23:59:51 +10:00
68ab882cd5
fix CustomLFS version pinning
2026-05-06 23:53:35 +10:00
19ebd8c795
Merge pull request #2480 from KPrivitt/dev
...
Incorrect time_t TypeDef used in RAK12035_SoilMoisture
2026-05-06 17:46:57 +12:00
f9ddd9da72
Merge pull request #2445 from kizniche/update-docs-txdelay-rxdelay
...
Docs: Add explanatory notes for txdelay, direct.txdelay, and rxdelay
2026-05-06 14:37:36 +10:00
00afb06768
Merge pull request #2475 from uwl-cpe-2025/fix/ST7789-reset-timing
...
Do not perform redundant reset on ST7789 displays
2026-05-06 14:32:30 +10:00
235706a22a
Incorrect time_t TypeDef in RAK12035_SoilMoisture
2026-05-05 11:20:36 -07:00
e56c1b3d58
Do not perform redundant reset on ST7789 displays
...
The `::init` method in the Adafruit ST7789 library is responsible to
initialize the device. This includes performing a reset, which can be
found in the Adafruit source for `Adafruit_SPITFT`.
Before this change, MeshCore performed its own ST7789 display reset
sequence, which consisted of three steps.
* Pull reset low
* Wait 10ms
* Pull reset high
Importantly, there was no fixed delay after pulling reset high. The
ST7789 driver requires a delay (T<sub>RT</sub>) of 5ms in Sleep In Mode
and 120ms in Sleep Out Mode before it will properly receive commands.
When `Adafruit_SPITFT` resets the device after MeshCore has already
reset it, the mandatory time may not have elapsed, leading to strange
behavior. In the author's case, this issue caused the initial
`fillScreen` to fail, such that the display showed an uninitialized
framebuffer.
This removes the MeshCore delay, leaving the responsibility of reset to
`Adafruit_SPITFT`, where they have the correct delays in place with
extra safety margin. The change was briefly tested by Josiah VanderZee
and Ben Zignego on a custom hardware build using an nRF52840 Dongle and
an Adafruit 4311 TFT display. The user button seemed to behave
strangely, but the display looked correct.
2026-05-04 17:01:39 -05:00
e727fd543b
Merge pull request #2462 from meshcore-dev/target-dup-cleanup
...
Refactor: removed duplicated target code
2026-05-02 17:21:51 +12:00
679fb9c0ab
Merge pull request #2460 from liamcottle/ui/startup-mute
...
Don't play startup tune if buzzer pref disabled
2026-05-02 02:24:37 +12:00
5a509752a7
don't play startup tune if buzzer pref disabled
2026-05-02 01:47:35 +12:00
0a8a0a4904
* Refactor: removed duplicated radio_rng_seed(), radio_set_params(), radio_set_tx_power()
2026-05-01 14:47:07 +10:00
ccda0a99d8
Merge pull request #925 from mtlynch/unit-tests
...
Add unit tests for Utils::toHex
2026-05-01 14:49:45 +12:00
9b1ca6b10b
Merge pull request #2456 from Avi0n/docs/fix-typos
...
fix typos in docs
2026-05-01 14:16:51 +12:00
0be082b5f9
fix typos
2026-04-30 14:21:26 -07:00
c7c400ed5d
Merge pull request #2428 from recrof/minewsemi-refactor
...
minewsemi: refactor platformio.ini
2026-05-01 00:56:32 +12:00
d7e3a9ddba
Merge branch 'dev' into minewsemi-refactor
2026-04-30 14:48:49 +02:00
ffbf73dc5c
Merge pull request #2432 from recrof/kiss-radio-everywhere
...
kiss radio: added stm32 support + envs in platformio.ini
2026-05-01 00:36:46 +12:00
5c651b35a0
Merge pull request #1954 from OverkillFPV/lora-longer-preamble
...
Lora longer preamble
2026-04-30 22:12:04 +12:00
bd90475d72
Merge pull request #2448 from weebl2000/bump-sensor-version
...
bump simple_sensor version to v1.15.0
2026-04-30 21:43:06 +12:00
9ce6b49cd3
Merge pull request #2430 from oltaco/use-forked-adafruit-nrf52
...
Use internal fork of Adafruit nRF52 Arduino
2026-04-30 21:42:24 +12:00
Scott Powell