Kaj SchittecatandClaude Opus 5
e2d07d8428
oumike's gap list. Three of the four are closed here. "Save update bin to SD" was gated on a list of board names that had grown to three entries and still left the T-Lora Pager out, despite it having both a card and OTA. It is now gated on the capability that actually decides it, CAP_SD && CAP_OTA (plus the ESP32 / companion conditions it already carried), which is what device_caps.h exists for: a new board with a card no longer has to remember to add itself to a list. Both halves were gated separately - the helper block and the button that uses it - so widening only the button broke the pager build on undefined symbols. They are now character-for-character identical, which is the point: they cannot drift apart again. Docs were further behind than the issue said. DEVICES.md listed five boards and we ship ten: the T-Lora Pager, Heltec V4-R8, T-Display P4 and Attaky Mesh Series were all missing from the support matrix, and the Pager was still sitting under "Requested boards" with an open issue link. README listed five envs and claimed the repo covers "the two boards". Both now match what release.sh actually builds. Still open from #289: the static deploy/flasher/ page carries only two manifests. Left alone for now - flasher.wadamesh.com redirects to the site flasher, which generates its manifests from gen-flasher-meta.py and already covers every board, so that directory may simply be dead. Worth confirming before adding files to it. All 8 S3 boards build. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A real touchscreen UI for your mesh radio. · open source · GPL-3.0
Touch-UI MeshCore companion-radio firmware for the LilyGo T-Deck / T-Deck Plus, Heltec V4 + TFT and eight other boards (ESP32-S3).
An LVGL touch UI — map, chat, contacts, channels, settings — split out of
meshcomod. The app depends on a
MeshCore fork via PlatformIO lib_deps.
Boards
See DEVICES.md for the full support matrix, install paths and per-board status.
- LilyGo T-Deck / T-Deck Plus — env
LilyGo_TDeck_companion_radio_touch(stable) - Heltec V4 + TFT + CHSC6x touch — env
heltec_v4_tft_companion_radio_usb_tcp_touch(stable) - Tanmatsu (ESP32-P4) — built from
tanmatsu/(ESP-IDF), ships via the Tanmatsu app store - Elecrow ThinkNode M9 — env
ThinkNode_M9_companion_radio_touch(beta) — keyboard & d-pad guide - RAK WisMesh Tap V2 (RAK3312) — env
rak_tap_v2_companion_radio_touch(beta) - LilyGo T-Lora Pager — envs
tlora_pager_lr1121_companion_radio_touch/tlora_pager_sx1262_companion_radio_touch(stable) — keyboard shortcuts - Heltec V4-R8 + Expansion Kit V2 — env
heltec_v4_r8_tft_companion_radio_usb_tcp_touch(stable) - LilyGo T-Display P4 — built from
tdisplay_p4/(ESP-IDF); AMOLED by default,WADA_P4_LCD=1for the TFT-LCD SKU - Attaky Mesh Series — env
attaky_mesh_series_companion_radio_touch(beta)
Architecture
This repo holds only the app: the companion_radio glue, the ui-touch
LVGL UI, each board's glue/variants, and platformio.ini. The MeshCore
core is not vendored here — it's pulled as a library via lib_deps from the
ALLFATHER-BV/meshcomod monorepo
(the same repo as the non-touch firmware), pinned by a lean source-only core-*
git tag. The touch-app files this repo owns (TouchPrefsStore, WifiRuntimeStore,
the transports, …) are dropped from the lib via -DMC_VENDORED_TOUCH_APP so they
aren't compiled twice. The build is byte-identical to the original in-tree
meshcomod firmware.
Build
PlatformIO pulls the core fork and all libraries automatically:
pio run -e heltec_v4_tft_companion_radio_usb_tcp_touch # Heltec V4 TFT
pio run -e LilyGo_TDeck_companion_radio_touch # LilyGo T-Deck
# or just `pio run` to build both
Flash with the NVS-preserving 4-component chain (bootloader / partitions /
boot_app0 / firmware at 0x0 / 0x8000 / 0xe000 / 0x10000) so saved Wi-Fi
credentials survive — not a merged image, which 0xFF-pads and wipes NVS.
Contributing
Contributions are welcome — see CONTRIBUTING.md. One topic per PR; inbound contributions are accepted under the project's GPL-3.0 license.
License
GPL-3.0-or-later — see LICENSE. wadamesh is copyleft: anyone who distributes a build or a fork must also make their source available under the GPL. This keeps the UI open and concentrates community effort instead of fragmenting it into closed forks.
wadamesh incorporates and depends on MeshCore (MIT, © Scott Powell / rippleradios.com) and other third-party components — see NOTICE for the full list and their licenses. MeshCore-derived files keep their MIT notices; the combined work is distributed under the GPL (MIT is GPL-compatible). The MeshCore fork that wadamesh builds against stays MIT on purpose, so its Wi-Fi/BLE hooks remain upstreamable to MeshCore.